Windows does not recognize ipod mini but charges it

can somebody please help me!!!!! im not very sabby with computers so its been hard for me. Ive put music on my brothers new secondhand ipod mini 2nd generation but my new(new to me) 2nd hand laptop wont recognize my ipod on windows and itunes. But it charges it. I can still put music on my brothers ipod but not mine. Ive been going through **** tryin it on my own & now im asking for help. Theres not very good help in support on the apple website and im downright frustrated. please someone halt my grief
dell inspiron 1150   Windows XP   laptop

Remain calm, everything is going to be okay.
Check out these links:
iPod Does Not Appear in My Computer
iPod Appears in Windows but not in iTunes
Post back with results and I hope this helps!

Similar Messages

  • Windows does not recognize ipod nano, but it charges

    Hey. If I plug my ipod into my laptop and computer, it does not recognize my ipod. It pops up a message that says that a unrecognizable usb device has been plugged in. It has, however, worked in the past. The ipod charges, but I'm not able to use it as a flash drive or to upload music or anything like that. What can I do to fix this?

    Thanks for the link. It didn't solve the issue on my mother in law's desktop, but it did contain a link to another solution for desktops (and for laptops not helped by the link you provided).
    The link reads: "If you don't have a PC laptop or the steps above did not help, see this document for more information."
    Essentially, putting the iPod into disc mode caused it to be recognized by XP and all was well.
    Anyway, your help is much appreciated as it's particularly difficult for me to work in the Windows enviroment since I so rarely do it.

  • Windows does not recognize ipod nano

    i cannot get windows (or itunes) to recongize my ipod nano. once in connect the ipod, i get the 'do not disconnect' message indefinately. it used to work. it reinstalled itunes, reset my ipod, etc. any suggestions?

    thanks, but the troubleshooter assumes windows is recognizing the ipod. in my case it is not. i download itune 7.0 just in case. same problem exists. in fact, since windows does not recognize the ipod, itunes eventually freezes up.

  • Windows does not recognize ipod whatsoever

    This is so frustrating.
    I just bought a new ipod video after giving up on my old ipod.
    Windows does not recognize the new ipod at all, not even as an extra drive. I'm tried uninstalling and reinstalling everything, restoring the ipod, connecting to different ports. No such luck. I've read up on the past posts concerning this problem with no luck.
    Can anyone help me?

    here's a bit here's what microsotft says:
    To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps: 1. Click Start, click Run, type regedit , and then click OK.
    2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E980-E325 11CE-BFC1-08002BE10318}
    3. On the Edit menu, click Delete, and then click OK.
    4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\4D36E967-E325-11CE-BFC1-08002BE10 318}
    5. On the Edit menu, click Delete, and then click OK.
    6. Exit Registry Editor.
    7. Restart the computer.
    it worked perfectly for me!make sure to follow the directions. it's easy and resolves many Windows XP problems related to ipods. for more info try microsoft help and support and just serch for ipod. it list a bit more info there. it doesn't say anything about reinstalling the apple software, but just to be thorough i unistalled itunes and quicktime before anything just to start with a clean slate, then reinstalled them from my ipod disk after the restart. then i downloaded all the updates from apple. my ipod has never worked better. good luck. theres no link to the page just search for ipod in windows help and support for exact wording

  • Windows does not recognize ipod touch

    Windows does not recognzie my iPod Touch.  This happened recently as it was recognized previously.  Any suggestions?

    iOS: Device not recognized in iTunes for Windows

  • Windows does not recognize ipod, neither does itunes

    I finally got my system to stop freezing when i plug the ipod in. Now when i connect it there is a messega from windows "unkown mass stoage device" Neither itunes nor ipod updater recognize i have plugged the device in. But on the screen it says do not disconnect. But there is no transfer of information.
    What do i do?
    Also what number do i call Apple to help me, i didn't buy the extended warranty.
    PS I have a 60 gig if that helps

    Have the same problem. I get a message saying a USB device has malfunctioned and Windows cannot recognise it. What to do? Feel like chucking iPod in the trash. Then iPod froze - no luck getting anywhere.

  • Windows does not recognize iPod

    This is my current situation:
    When I connect my iPod to my computer using USB 2, my iPod briefly shows the "Do not disconnect" screen, and then after several seconds, it shows the "OK to disconnect" screen with the checkmark.
    Also, my Windows XP briefly shows the "Safely remove hardware" icon in my system tray while the iPod is in the "Do not disconnect" mode, and then that also immediately disappears. So I never get to connect to my iPod at all, so I cannot perform any iPod updates or restores.
    Do you guys have any suggestions for me? What should I do to fix this?
    Thanks in advance!

    Welcome to Apple Discussions!
    What happens if iTunes is open when you connect? How about if you open after it shows OK to Disconnect, yet it is still connected to the computer.
    Finally, try restarting while it says OK to disconnect and connected to the computer...
    http://docs.info.apple.com/article.html?artnum=61705
    btabz

  • My computer will not recognize my iPod Nano when i connect it. I tried my laptop instead but it said the same thing - one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it. Can i fix this?

    My 16 gig iPod Nano 7th gen was put of power. I connected it to the computer and it started to turn on (the apple appeared in the middle of the screen). Then left it two minutes and the computer went into sleep mode. My iPod nano had gone off and now it will not turn on, or connect to the computer, so i cannot charge it. I am not sure if it is a problem with the usb cable. When I conntct the cable to the computer nothing happens, but then when i connect the iPod to the cable it says 'one of the USB devices attached to your computer has malfunctioned, and windows does not recognize it'. Please don't say its broken already

    It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

    Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got  pop up saying "  "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
    Ive tried plugging this into 3 other computers same error message pops up .
    PLEASE help me . thanks (:

    Uninstall your USB drivers in your computer & reinstall.
    contact your pc manufacturer for the steps.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • HT1369 Brand new computer with Windows 8.1 will not sync with iPod Classic 120G.  Windows does not recognize anything but iPod Touch?  Is there a simple sloution?

    Brand new computer with Windows 8.1 will not sync to iPod Classic 120G.  Windows does not recognize anything but iPod Touch?  Is there a simple solution.  Diagnostics have run and failed to point to a fix.

    Might be worth tearing down the whole iTunes install and starting over...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

    Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-(  it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

    As I said above, some of the new lightning cables have been known to be causing problems for some users.  Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
    B-rock

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Why windows 8 does not recognize ipod touch model A1367 4th Generation?

    Why window 8 does not recognize ipod touch model A1367 4th generation?  and of course iTunes either.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (it applies to win 8)
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

Maybe you are looking for

  • Event Registration: Cluster vs. Individuals

    I have a piece of code called a "Receiver".   It listens on a TCP connection for various messages from a PXI box. There are about 30-40 different types of messages, some with large payloads, some with small. The receiver decodes which message came in

  • AS2 Reciver Communication Channel error

    Hi, I am doing FILE to AS2 ... I configured the Scenatio with  Synchronous MDN , I have Created the Sender for MDN report too.. beow is my Error At AS2 reciver Communication Channel... Message processing failed. Cause: javax.resource.ResourceExceptio

  • Bank Routing Code error

    Hi gurus, i have a question regarding bank routing code error. Heres the scenario.. Our vendor created 2 check request, one in US currency and one in AUD currency. When I executed the payment run, the payment doc that was in US currency was received

  • Calling Stored procedures dynamically

    Hi , I'm trying to call different Stored prcedures from my Java program based on different conditions. I have the column values need to be passed as input params to the Stored Procedures. But the sequence of values and the sequence of the input param

  • SDO_BUFFER & multlinestring

    Hi! I am trying to create a buffer around the I 10 Highway from the US-dataset, interstates table. I am using following statement: select sdo_geom.sdo_buffer((select geom from interstates where highway = 'I 10'), 0.5 , 0.1) from dual; which results i