Windows File Protection error when installing 9i client

While installing the 9i client I am getting a Windows file protection error message on all 5 of the test machines.
If I cancel out of the message the install finishes correctly and everything seems to function properly.
However, it is prety counterintuitive to have to cancel out of the message when we are wanting to do these installs in silent mode.
Anyone else have this problem, or any ideas on fixing?

nm, fixed it myself.
The Oracle install was replacing regsvr32.exe with an old version. When WFP detects a file protection problem, it first looks at the %systemroot%\system32\dllcache dir for a known good copy of the file to restore. If it doesn't find one in there, then it pops the dialog up and asks for a CD. If it does find one then it silently restores it in the background.
So, now at the beginning of my script I have a script checking the dllcache dir for regsvr32.exe, if it is there it moves on to the install, if it is not then it copies the one from their current system32 dir into the system32\dllcache dir. That way when Oracle replaces it WFP will silently restore their previous version.
-C

Similar Messages

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Jrew error when install 8i client in chinese win98

I got the following error when installing the 817 client to chinese win98.
JREW caused an invalid page fault in
module JAVAI.DLL at 0167:6ee3803a.
Registers:
EAX=00000060 CS=0167 EIP=6ee3803a EFLGS=00000206
EBX=c0000005 SS=016f ESP=0063ebf0 EBP=0063f184
ECX=c15089f0 DS=016f ESI=00000009 FS=3587
EDX=816aac84 ES=016f EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
Stack dump:
0063f184 0063f2a0 0063f1c8 c0000005 00000000 00000000 00000000 00400000 00010000 00000000 00020000 6ee37ac9 00000009 0063edb8 00000104 0063ec58
How to resolve it ?

1. Yes, it's a distributed installation. I choose ABAP stack installation and then choose Java installation as add in.
2. Yes, J2EE_ADMIN & J2EE_GUEST can log on to system with password james123.
3. In usercheck log file, it contains a part of information of sapinst.log, shows below.
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
        at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)

MSVCRT.DLL error when install 8i client

When I installed 8i client on win98,
I got the error message "String Index Out of
Range: -51".
Can anyone help me? Thanks a lot!
Stephen
null

thats very easy i assumed you have vista already this is what
you do you go to control panel and go to the user acount setting
setting and then turn off the user account control this feature
will let you now install itself in your dreamweaver
application

Windows installer engine error when installing LV 8.2.1

Trying to install LabView 8.2.1 on a system and getting a "Window Installer Engine" error and the program quits. The software successfully installed on another system.
I have disabled all other programs and virus scanners. Any suggestions?
Thank you,

I think I may have fixed my own problem and will try and list the steps here in case anyone else runs into this.
The computer is networked and we are running network licensing. I have admin priviledges also on this machine.
We had to have the administrator for the network log on (with the LV installation CD in the drive). The option was selected to install LV 8.2.1 and then a window appeared notifiying that the system was installing Service Pack 2.
The admin then logged out and I logged back in to my local accout (not my network username and passwor) and the installed worked correctly (whew!).
There were some other password issues whick I don't think were related to this problem.

HELP: error when installing Oracle Client 8.0.5.0.0 on Windows98

I am trying to run the installer CD for the Oracle8 Client v. 8.0.5.0.0 for Windows NT and Windows 95/98 on a Windows98 desktop.
This is the error the installer reports back to me:
ORAINST caused an invalid page fault in
module OIBKND32.DLL at 015f:00be7cec.
Registers:
EAX=00000000 CS=015f EIP=00be7cec EFLGS=00010216
EBX=ffffff10 SS=0167 ESP=0064de34 EBP=00e1c2e4
ECX=fffffdef DS=0167 ESI=00e20000 FS=0f07
EDX=aaaaaab0 ES=0167 EDI=0064de68 GS=0000
Bytes at CS:EIP:
80 3e 20 75 ef 83 fa 64 7d 06 81 c2 6c 07 00 00
Stack dump:
00e1c2e4 00e1c634 00e1c644 00dd24d4 00e1c640 fffffdf0 00000010 0064f148 00be81d8 00e1c454 00bf33fc 0064de68 00e1c644 00000010 780012c2 00000008 Y
I have previously installed the Oracle 7 client and when I try to remove the files that came with that I get a differnt error that also asks me to close and then exits.
Does anyone have any clues?
Tamara Foster
[email protected]
null

I guess results are unpredictable when using such an old client, that was not written to handle pipelined functions. Presumably in its communication with the server it is sending the wrong information because it doesn't know what datatype it is dealing with.
You will also hit problems dealing with object and collection types in general, timestamps, intervals and WITH clauses. I've had no problems using the 10g client against a 9.2 database. Not only do you get a better version of SQL*Plus, but it solved some similar problems within PL/SQL Developer.

Windows Installer package error when installing itunes.

How can I reinstall Apple Software (Update) on my PC which is necessary to reinstall itunes?
Also when I've tried to reinstall itunes I'm constantly told there is a problem with the Windows Installer. Are there any suggestions? Thank you for any help that you may be able to advise.

Let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Windows Installer reports errors when installing iTunes

I have a system with Windows XP. I only have 512MB memory. I have made numerous attempts to install iTunes. I actually had iTunes on the computer previously in conjuction with EZVinyl Converter. I was having problems with that and tried to reload iTunes. The download works fine. When I try to install, I get a message saying, "Windows Installer encountered problems before iTunes could be configured. I do not know how to fix the problem.
I use Comodo for my antivirus and firewall protection.

Problem was resolved by solutions offered by B Noir. It was necessary to remove the Temp folder in Local Settings for iTunes to install correctly on my Windows XP system. Thanks for your input.

File read errors when installing the oe schema.

Hi,
I'm new to Oracle and I've been playing around with the sample hr schema that came included with Oracle 11g XE (installed on a machine running Windows 7). I downloaded the oe schema off the otn website and I'm trying to install the sample database. I've pasted the errors I get in SQL Plus below.
I'm assuming the 'unable to open *.sql' errors are because oracle is looking for them in a different directory. Those files are present in the same directory as oe_main.sql whose location I specify at the start. Should'nt this be enough?
Thanks,
Aditya
SQL*Plus: Release 11.2.0.2.0 Beta on Mon Jun 27 13:45:03 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> @?/demo/schema/oe/oe_main.sql
Enter value for sys_password: oe
User dropped.
old 1: CREATE USER OE IDENTIFIED BY &pass
new 1: CREATE USER OE IDENTIFIED BY OE
User created.
old 1: ALTER USER OE DEFAULT TABLESPACE &tbs
new 1: ALTER USER OE DEFAULT TABLESPACE users
old 2: QUOTA UNLIMITED ON &tbs
new 2: QUOTA UNLIMITED ON users
User altered.
old 1: ALTER USER OE TEMPORARY TABLESPACE &ttbs
new 1: ALTER USER OE TEMPORARY TABLESPACE temp
User altered.
Grant succeeded.
Grant succeeded.
Connected.
Grant succeeded.
Connected.
Session altered.
Session altered.
SP2-0310: unable to open file "oe_cre.sql"
SP2-0310: unable to open file "oe_p_cat.sql"
SP2-0310: unable to open file "oe_p_pi.sql"
SP2-0310: unable to open file "oe_p_cus.sql"
SP2-0310: unable to open file "oe_p_ord.sql"
SP2-0310: unable to open file "oe_p_itm.sql"
SQL>
Edited by: 868550 on 27-Jun-2011 01:26

Hi Aditya,
I'm assuming the 'unable to open *.sql' errors are because oracle is looking for them in a different directory. Those files are present in the same directory as oe_main.sql whose location I specify at the start. Should'nt this be enough?No. The main-script calls the subscripts relative to the directory you started your sqlplus from. You should change to */demo/schema/oe*, start +@oe_main.sql+ there and the installation should finish without further issues.
-Udo

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909

Access Denied Error when Installing Suitcase

I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do not have enough access privileges for this installation". I am logged in as an administrator, I tried creating a new Administrator account, I have repaired permissions, I have tried downloading a new file, all with no luck and now I am stuck. Any ideas?
G3 Pismo, G4 Desktop Mac OS X (10.4.3)

Hi,
Firstly, please let us know if it is a workgroup or domain environment.
Also, please let us know more details about the configurations of the server and clients.
Meanwhile, you can check the settings by referring to the following:
Allow someone to connect to your computer using Remote Desktop Connection
http://windows.microsoft.com/en-HK/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-hk/windows/remote-desktop-connection-faq#1TC=windows-8
If issue persists, please provide us the unedited error message or screenshot for further research.
Thanks.
Jeremy Wu
TechNet Community Support

Invalid File Name Errors when syncing to Ipod

Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
The windows would keep popping up countless times until the sync would just seem to time out and stop.
The problem songs would have no problem playing in iTunes.
Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
8. Changing or deleting the tags has no effect at all.
9. File name lengths are already under 200 characters and there are no special characters used.
So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
Is there a better way to fix the problem? Especially if someone knows the root cause?

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Windows File Protection and a3d.

When I install the driver CD for a X-fi series card on a fresh install of Windows XP, I get a warning in Event Viewer from "Windows File Protection."
<BLOCKQUOTE dir=ltr>
<EM>File replacement was attempted on the protected system file a3d.dll. This file was restored to the original version to maintain system stability. The file version of the bad file is 80.0.0.3, the version of the system file is 2.9.0.0.</EM>
[/quote]

Hmm... That is rather strange. Windows doesn't generally include that file on the CD so it is strange that it gets replaced. Do you have a custom Windows XP CD with integrated drivers?
You may avoid the file being replaced by removing your Windows XP CD from the dri've. Windows will try to search for the file, and if it doesn't it will ask you if you would like to keep the "unknown version".
If this is the only file that gets replaced, I wouldn't worry at all. Xou are not likely to play games that only support A3D .0, these were pre-998 games and even then, they do support pure DirectSound3D.

Windows File Protection error when installing 9i client

Similar Messages

Maybe you are looking for