Windows Mail Error Message
I have a wired HP Desktop SR5219UK operating the Windows Vista 32 bit system.
I have a number of "Draft" emails stored in Windows Mail, but one of them (inevitably by far the longest and most important!) suddenly shows only the Subject Heading but instead of being able to see the contents of the Draft, I merely have a note where that should be saying "Message Cannot Be Found".
I'm not aware of having done anything to cause this (no new programmes added etc) but can't find any way of retrieving the "lost" Draft. Does anyone have any ideas as to how I might be able to do so, or is there no hope of recovering it?
All of my other "Draft" messages remain in place and have not been affected.
Hi rbaer,
Mine is a basic thought, (and perhaps one you have already tried), but if not, I would suggest ending the task. To do this, press control + alt + delete. Click "Start Task Manager". Click on Windows Live Mail 7, and then click End Task. Hopefully that will give you the fresh start with the program you need. Best of luck to you.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP
Similar Messages
-
I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
I got a problem on running the iTune 64bit on Windows 7, error message says " the folder "itunes" is on a locked disk or your do not have write permission for this folder. Any one ran into this problem ?
It worked before.Open Disk Utility via Spotlight or in the Applications folder stored within the Utilities folder. Close all applications and 3rd party software and choose "Repair Disk Permissions." Reboot the computer when finished, and test to see if the issue is resolved.
-
i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???
Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day! -
I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
I've attempted to repair my .NET framework, didn't help.
I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
neither one fixed the error.
Any help? Anyone else run into this error? What should I do?
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
BUTTONS:
&Retry
CancelHi Gurmo,
HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
KB article.
I suggest you run the System Update Readiness tool and check if the error still persists.
There is a similar thread for your reference.
https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
I am unable to install iTunes due to Windows Installer error message on Vista
I needed to update my iTunes since I purchased the iPad2. My Windows Vista machine will not allow me to update the program due to a "Windows Installer" error message. I first attempted to update, then I uninstalled and am unable to reinstall the software."There is a problem with this Windows Installer package. A program required for this install to complete could not be run..."
I finally got the program to install/run. I downloaded a third copy and saved it again on the desktop. I selected "Run as Administrator" instead of "Run" It must have been the 10th plus time I tried to install, but this time it completed. I don't know if the "Run as Administrator" was the key since it is Vista, or if I just got lucky. Either way I am relieved.
-
I can't install itunes for windows get error message 5
i can't install itunes for windows get error message 5
I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop). -
Delete windows warnings, error messages from hard drive
delete windows warnings, error messages from hard drive
Hello @NeoTaino,
I have read your post on how your desktop computer is displaying a "delete Windows warning, error messages from hard drive". Did you install any hardware or software recently? What does the full error message state as it appears on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]
Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
Hopefully using the forum someone out there will know the answer. -
Undeliverable mail - error message
When I try to send mail, I get an Undeliverable mail error message/response. I don't know if it makes a difference if I select the me.com or mac.com as my outgoing server. I also work at a university, but I don't think that should be a problem since this just surfaced today. I've posted some additional technical details below. Has anyone else experienced this problem recently?
Error message details:
SMTP module(domain mac.com) reports:
host smtp-mx2.mac.com says:
550 5.1.1 unknown or illegal alias
Reporting-MTA: dns; regor.[myuniversity].eduFirst of all test the other mail host. Do nslookup on the mx record for the domain. Maybe also check it from somewhere else on the internet to make sure your dns server doesnt still have an old entry cached. Once you know dns is going to the right server, try to telnet to port 25 on that server to see if you can connect to the other mail server and get a header back. If you want you could go a step further and send a message via command line but not usually necessary.
If that server seems fine, look at your own mail server. Check dns, delivery to other addresses etc.. -
Windows Installation error message a required ressource can not be located: ms visual c 2005
no idea what to do. please help me!
Am 04.11.2014 21:48, schrieb Jeff A Wright:
>
windows Installation error message a required ressource can not
be located: ms visual c 2005
created by Jeff A Wright
<https://forums.adobe.com/people/JeffAWright> in /Creative Cloud
Download & Install/ - View the full discussion
<https://forums.adobe.com/message/6899407#6899407> -
I purchased the Iphone 4s yesterday. Every time I try to download newest version of Itunes I get a windows installer error message. I went to microsoft and downloaded all I could please help
Another Vista Victory!!! Try uninstalling iTunes, then download and install it again. Make sure Vista is up to date.
-
Cnat update itunes get windows installer error message
When trying to update itunes get window installer error message. Running windows vista
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)
-
I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.
You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]] -
ITUNES MATCH - Need help. Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows must close program [iTunes]" with only 30-50 of 500+ songs. Anyone have this issue of iTunes crashing?
Exactly the same problem here. As far as I can see this problem has been around since Match was first released with no action from Apple to rectify it. I've spent days trying to get this to work now and unless I get a fix soon, I'm going to pull my Match membership and ask for a refund because this is not what I signed up for...
Maybe you are looking for
-
Capture & Post Invoice at the time of Goods Receipt in one Step
Hi, We are doing the following for Goods Receipt (as decided by other consultant) 1. Goods Receipt (Only Part I) - currently being done by Stores 2. Capture Invoice (J1IEX) - currently being done by Purchase 3. Post Invoice (J1IEX) - currently being
-
How to write a Timestamp in an Oracle table?
Hi, I am pretty new to SAP IdM and therefore have a very basic question. I am using SAP IdM 7.2 SP8 on Oracle. I was creating a job where I calculated some values from the database with a 'From Database' path. Then I wanted to store these values in a
-
Hi Experts, I have configured the following FCC in Sender communication Channel. DT_HEADER.keyFieldValue =1 DT_HEADER.fieldNames = KEY,FILENAME DT_RECORDS.keyFieldValue= 2 DT_HEADER.fieldNames= KEY,AMOUNT DT_TRAILER.keyFieldValue
-
Downloading Iso Files (Programmes) and Using them
Hello, I need some help please, I have downloaded some Iso files which are intended to be programmes, I can burn them to a CD with no problem using disc utility. However, they do not play as intended, When clicking on the cd icon mounted on the deskt
-
No asset values shown for new fiscal year
We have a problem with an Asset in our FA module. The Asset was created in May 08 and had costs posted to it within the same month. Depreciation was run for May & Jun 08 with no problems. Year end was Jun 08 and the asset was included in both the Ass