No asset values shown for new fiscal year

We have a problem with an Asset in our FA module. The Asset was created in May 08 and had costs posted to it within the same month. Depreciation was run for May & Jun 08 with no problems. Year end was Jun 08 and the asset was included in both the Asset Balances report and the Asset History Sheet.
However, the asset does not appear in either of the above reports for Period 1 of the new year. It can still be viewed in Asset Explorer (AW01N), but the cost does not appear to have been carried forward to the new financial year. There is no data in the u2018acquisition valueu2019 field for 2009 and no planned depreciation information.
We have checked the master data record and although the acquisition posting date was 24.05.2008, this date does not appear in the u2018First acquisition onu2019 field, so not sure if this is the issue?
Any ideas anyone?

Hello..
You first have to change the fiscal year of the asset to next year through T Code AJRW & than only u can see the balance in the next year.otherwise i dont think there is any problem.
Regards,
Aakash

Similar Messages

  • Asset report error in New fiscal year

    Dear gurus,
    Today my company meet the problem when run asset report is pop up "fiscal year change not yet made for company code 1000". But when i ask my user they told me that they already run the AJRW.
    I seacrh to forum how to check whether any tcode that fiscal year change havee benn made or not?
    when i run OAAq it show company code 1000 = 2009 It okey?.. any guru please help.. can we run another AJRW?

    Hi Muzaidi,  
    In OAAQ you see only the closed fiscal year.
    In table T093C you can see the current fiscal year. Here you an see if the fiscal year change have been made or not.
    Jagdish is right, you can make the fiscal year change multiple times. This is no problem at all.
    regards Bernhard

  • New posting period for former fiscal year

    Hello All!
    For a customer we set up a database with posting periods for 2011 and 2012 (monthly periods). The database went live in 2011.
    Now the requirement came up to post the opening balances for 2011 per end of 2010 (to have the postings not in fiscal year 2011).
    My question is: is it a problem to add now a fiscal year 2010 (yearly basis)?
    Thanks and regards
    Peter Ganserer

    Hi Peter,
    Although it is your 2nd posting, I would add welcome message because I had not do so 1st time.
    For your question, it is not possible to add new posting period for former fiscal year. You best solution is to post those OB as the first date of the first period.
    Thanks,
    Gordon

  • Error in Asset Value carry forward to next year

    As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
    The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

    Hi Erika,
    I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
    600981       0    Secretariat Table                              2014 Error in dep. calculation

  • Asset depreciation in a closed fiscal year

    Hello,
    After closing fiscal year 2010 we noticed that asset "A" start depreciation date was incorrectly set to December, 15.
    Now we have corrected this date to December, 1. SAP have re-calculated the depreciation so we have aditional USD 600 planned for December. (we have UDS 600 posted + USD 600 planned).
    Is there anyway to force those USD 600 to be posted on the new fiscal year 2011?
    Is there any other way to arrange our depreciation issue withhoul opening 2010 for posting?
    Thank you in beforehand.
    Juanma.

    Hi
    I believe, OAYF is relevant for recalculating asset accum dep during Legacy data transfer.... I dont know if it would help in this case
    If you have not done the FY 2010 closing, system wont allow you to close till the time all planned depreciations are posted...
    Refer note 619969... You can run AFAB for Period 13 and post the dep in Period 12.... After that, do a balance carry forward
    However, if you dont wanna post in 2010 any more, then dont change the Dep Start date.... Let it remain as Dec 15.... You can post Unplanned dep for Jan 2011 using ABAA - Followed by AFAB (Unplanned option)
    Br, Ajay M

  • GL balance carry forward special period 13 to new fiscal year and Rec acct

    Hi,
    would like to seek for your advice as below question/problem.
    a) User now is doing the year end closing. Normally the closing is up to the period 12 and for the purpose of track the adjustments made by the management and auditors user post to period 13 2008 from the pervious financial year. Our concern is when perform the GL Balance carry forward to new fiscal year which is 2009 does the system carry forward the GL adjustment figure from period 13 to the new fiscal year on top of that when we perform the GL balance carry forward to new fiscal year 2009 and later on find out there is an audit adjustment that need to done and user post in the period 13 fiscal year 2008 can the adjustment auto post to the new fiscal year?
    b) Can we change the Rec account in the vendor master as currently user need to change the vendor from difference Rec account which from joint venture to subsidiary account code? If involve the SPRO configuration how where should we configure? After we change the configuration does all the posting from one Rec account subsidiary will auto post to another Rec account Joint venture?
    Kindly advice.

    Hi,
    Thank you for the prompt reply.
    a)could you provide the path/T-code to view the  vendor master activity screen layout configuration field status for reconciliation account should be Optional.
    b)Beside,what the impact of change the reconciliation account from one to another? It is neccesary/must to do the balance sheet adjustment for change the reconcilation account?
    Can we post the balance through the manual JV (F.02)with the document type is ZD(Debit Note) to post the balance of old reconciliation account to the clearing account and then change of the reconciliation account to the new account then reverse the posting of the JV? By doing so what is the impact in the system? In this scenarion do we need to do the balance sheet adjustment?
    c) You mention balances from the old recon will not be posted to the new reconcilation account unless I do a balance sheet adjustment it is mean after I run the balance sheet adjustment the balance from the old reconcilation account will auto post to the new reconcilation? What other impact will effect the system?
    d) If the company never run the balance sheet adjustment before and due to the scenerion mention above they run the balance sheet adjustment for the first time what are the impact in the system for the company that only have one business area and also for the company which have more than one business area?
    e) What are the prerequisite step/configuation/setting need to be setup in order to run the balance sheet adjustment as the company perviously never run the balance sheet adjustment before? Kindly provide reference/document/guide.
    e) Change of reconcilation account does it related/impact to the account group of vendor master?
    Please help.

  • Balance Carry Forward to new fiscal year wrongly

    Dear All,
    Currently we are in 2012 fiscal year. our fiscal year starts form July to June.         
    The problem is user has posted some of the documents in 2010 fiscal
    year 13th period after Changed the G/L account on 24.05.2010 (2010
    Fiscal year) from Balance sheet account to Profit & loss account by
    giving the document date is 03.09.2009 (2010 Fiscal Year) and
    30.06.2010 (2010 Fiscal Year).
    These 2 documents are still stored in BSEG table as a Balance sheet
    items. Why these stored in this table even after change the G/L account
    to Profit and loss account?
    When we do the Balance carry farrowed to 2011 fiscal year, the same
    amount is carry farrowed to 2011 fiscal year. Why it has carry farrowed
    to new fiscal year even though it is a Profit and loss account.
    Could any body give the solution for this issue.
    Thanks and regards,
    N. Rao

    Dear Ravi,
    Thanks for your replay.
    Actually now we are in 2012 fiscal year. the documents are posted in 2010 fiscal year 13th period. It is not suggestible to do carry farrowed from 2010 to 2011 fiscal year because of the reports were already submitted.
    We have done testing in quality system that reversed the posted documents by giving the same dates and later we did the f.16 to carry farrowed from 2010 to 2011. Then the balance was became "0" at 2011 fiscal year beginning. But it is not suggestible in production.
    Could you please suggest any alternative solution or any correction program.
    Regards,
    Mr. Rao

  • How to get a Monthly Depreciation Simulation for next fiscal year?

    I need a report that give me the depreciation simulation for next fiscal year, but I need it monthly wise. I run report S_ALR_87012936 with report date 31.12.2011 and evaluation period = month.
    The report gives the error message AA669 Fiscal year 2011 is already closed in Financial Accounting
    I read that this report doesn't work monthly wise for future years. Is there a workarround?
    Best regards!

    Hi,
    I'm sorry there is only RASIMU02. Note 396974 describes, this is a missing functionality and there  is no workaround.
    Reports on derived depreciation areas that do not post any values to the
    general ledger are allowed with the evaluation period year. An
    evaluation using month, quarter or half-year is not supported.
    In general, the depreciation forecasted by monthly in report RASIMU02 are only for depreciation area which posts depreciation to GL. For non-GL posting area, we recommend you simulate the depreciation 
    in 'fiscal year' mode. if you simulate the depreciation 
    Basically RASIMU02 is NOT designed to provide period simulation for these non posting areas. This because RASIMU02 uses for periods which have been posted already the created ANLP. But ANLP´s  are not created for non-posting areas. So in these periods where   a depreciation run had been executed already, RASIMU02 will not show
    values.                                                                               
    For AA 669 please see:
    Best Regards Bernhard
    Edited by: Bernhard Kirchner on Nov 25, 2010 9:20 AM

  • Year To Date for Current Fiscal Year

    Hi All,
    I have installed BC variable Year To Date for Current Fiscal Year 0I_CFYTD..
    foloowing error occurs
    Variable 0I_CFYTD could not be replaced..
    Do i need to write any code or Please help.....

    Hi,
    Please check if fiscal year variant is used in the filter. Else the BC variable throws an error. Drag fiscal year variant to the filter area and set a value or variable input for the same.
    Regards,
    Satya

  • How to cumulate key figure for whole fiscal year with one time variable?

    Hello everybody!
    I have a problem creating a query that allows to get cumulated key figure for <b>whole fiscal year</b> (FY), when I actualy type <b>only last period</b> for the FY.
    The query itself is very simple:
    - I have "Organization" characteristic in "Rows" section
    - I have one key figure "Number of invoices" in "Columns"
    - I have "Fiscal year variant" 0FISCVARNT defined in "Filter" that has 12 periods within Fiscal year
    and then
    - in section "Free Characteristics" I have "Fiscal year/period" 0FISCPER.
    I want to be able to provide ONE single value when run query, which is last period of a FY (like 012/2003), but then in report see cummulated number of invoices for WHOLE fiscal year.
    Will appreciate any help!
    Vitaliy

    Please see the white paper entitled "How to... Derive a Variable value from another variable 2.x (pdf)".
    Regards,
    Troy

  • You have not maintained a rule for the fiscal year variant

    1) I have Fiscal Year Variant in the Cube ( it got added along with fiscal year ) but there is no Fiscal year variant in the datasource & when I dont map it Transformation activation prompts error " You have not maintained a rule for the fiscal year variant ".
    Can I just delete Fiscal year variant from the cube..does it matter?
    2) Fiscal year & Posting Period can be populated from Fiscal Period, is the vice versa possible..? Does the sytem will take care of the conversion..?

    1. no, you should not delete and you cannot delete fiscal year variant from cube, it's required by fiscal year/ period (compound infoobject), you should add it in your datasource, or you can map with a constant value e.g K4
    2. yes, fiscal period can be populated by posting period
    some info on time characteristic relationtionship
    http://help.sap.com/saphelp_nw70/helpdata/en/44/be8b631c743959e10000000a1553f6/frameset.htm
    hope this helps.

  • Carry forward the PR/PO doc in new fiscal year?

    hi dear all,
    How to carry forward the PR/PO doc in new fiscal year?
    upesh

    Hi,
    This error comes from FI side. For the Account assigned PRs, POs should be carry forwarded in new budget
    Refer this error to your FI guys, they'll make relevant settings
    Umakanth

  • BW data load for previous fiscal year depending upon sy-datum

    Hello All,
    In SAP BW, while loading data using date, I have requirement to load the datat for previous fiscal year.
    Fiscal year run from Oct to Sept.
    I have given example of Nov 2012. Becuase I am going to add this info-package in process chain which will run Nov of every year for full data load.
    For Ex: I am loading data in calander year/month Nov 2012. Its previous fiscal year is 2011.
    So for fiscal year 2011, my dates for data load would be : 10/1/2010 to 9/30/2011.
    So my code or functional module should retun me 10/1/2010 to 9/30/2011 this value.
    Kindly give your inputs for the same.
    Thank You.

    Hello All,
    I have wriiten below code and it has solved my problem:
    REPORT  ZTEST_PK.
    data:
    month_last type n length 2,
    year_last type n length 4,
    year type n length 4,
    month_first type n length 2,
    month type n length 2,
    year_first type n length 4,
    day_in type sy-datum,
    day_out type sy-datum,
    v_date type n length 6,
    select_period_low(8) type c,
    select_period_high(8) type c.
    year = sy-datum(4).
    month = sy-datum+4(2).
    concatenate year month into v_date.
    Data: fisyr type n length 4,
    fiscper type n length 3.
    *Fiscal years run from Oct to Sep
    *For Ex: Nov2012 load of the previous FY itu2019s FY 2011, the dates would be Oct 10 (10/1/2010) to Sep 11 (9/30/2011).
    CALL FUNCTION 'Z_XCONVERT_CALMONTH_TO_FISCAL'
      EXPORTING
        IV_CALMONTH       = v_date
    IMPORTING
       EV_FISCYEAR       = fisyr
       EV_FISCPER3       = fiscper.
    year_last = fisyr - 1.
    year_first = year_last - 1.
    month_first = '10'.
    month_last = '09'.
    concatenate year_first month_first '01' into select_period_low.
    concatenate year_last month_last '01' into day_in.
    *calcualte last day of  a given month
    CALL FUNCTION 'SN_LAST_DAY_OF_MONTH'
      EXPORTING
        DAY_IN             = day_in
      IMPORTING
        END_OF_MONTH       = day_out.
    concatenate day_out(4) day_out4(2) day_out6(2) into select_period_high.
    write:/ select_period_low.
    write:/ select_period_high.

  • New fiscal year

    how to open new fiscal year,means financial year 2007-2008

    Hi,
    see the below site for fiscal year configs.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/ce/7e22417c22f323e10000000a155106/frameset.htm
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Changing Depreciation Key for Tax for closed fiscal years -

    Hello,
    Hoping someone can help me with this question - Is it possible to change the depreciation key for closed fiscal years - we need to change it for Tax - books. And if yes - does it mean we need to open closed fiscal years ??
    Thank you,
    Richa

    Hi,
    you will need to open the FI and AA periods. After changing the depreciation keys do the necessary dep run and close the books in the correct sequence.There should not be problem.

Maybe you are looking for