Windows Server 2008 DNS command syntax to set All zones to Dynamic Secure updates

Hello,
Am I trying to configure all of my 150 dns zones to  dynamic updates from "none" to "secure"
What is the command I should run to update all my zones. I ran "dnscmd myservername /config ALLZones /AlowUpdate 1"  and I keep on receiving this error message
 "DNS_ERROR_ZONE_DOES_NOT_EXIST"
What should be the exact command/argument I should run to propagate this on all my zones ?
is "..allzones" or "allzones"  a valid argument ?
Thanks
Robert

Hi Robert,
Even add the two dots, I also get the same result.
Here is the screenshot of my lab,
As Kumar has mentioned, you need to write a script.
I have tried to modify the script provided by Kumar. It works on my lab server.
Here is the script,
$a = get-dnsServerZone
foreach ( $zone in $a)
if ($zone.ZoneType -eq "Primary")
if ($zone.IsDsIntegrated -eq "True")
{ set-dnsServerPrimaryZone -DynamicUpdate Secure -ZoneName $zone.zonename }
Best Regards.
Steven Lee
TechNet Community Support

Similar Messages

  • Manage Windows Server 2008 DNS role

    Hi,
    I'm testing Windows Server 2008 Server Core.
    The primary role of my server is DNS Server. Usign command line the dns was installed and configured.
    Now I'll be manage the dns usign mmc dns snap-in from another computer in the same subnet.
    When I register the DNS server on this computer an access deny error occured.
    Can somenone help me to grant remote machine to open this connection?
    For testing access on Windows server 2008 computer I have open rdp connection. Firewall service is disable.
    Thanks in advanced.
    Marco

    I got more or less the same:
    I joined a Core server to my W2K3 Domain.
    I promted the core server as  the 2nd  Domain controller
    I can now use nslookup to query DNS on the core server
    But when try to manange DNS with a dns MMC snapin i get access denied (you do not have permission to access this dns server)
    The Ip settings seem to be fine
    DC01 (w2k3)
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
     Physical Address. . . . . . . . . : 00-0C-29-4A-F6-5A
     DHCP Enabled. . . . . . . . . . . : No
     IP Address. . . . . . . . . . . . : 10.0.0.3
     Subnet Mask . . . . . . . . . . . : 255.255.192.0
     Default Gateway . . . . . . . . . : 10.0.0.8
     DNS Servers . . . . . . . . . . . : 10.0.0.3
    Core Server (W2K8) CTP july
    Connection-specific DNS Suffix  . :
    Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
    Physical Address. . . . . . . . . : 00-0C-29-CF-36-A5
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80:19a:b7c5:6d00:bb99%2(Preferred)
    IPv4 Address. . . . . . . . . . . : 10.0.0.2(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.192.0
    Default Gateway . . . . . . . . . : 10.0.0.8
    DNS Servers . . . . . . . . . . . : ::1
                                        10.0.0.2
                                        127.0.0.1
                                        10.0.0.3
    NetBIOS over Tcpip. . . . . . . . : Enabled
    I'm a little bit lost,

  • How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

    Hi Every Body,
    1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
    -- I have download all files from e-delivery and check the md5 and all files are OK.
    I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
    2- Was that a problem ?
    -- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
    BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
    even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
    C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
    3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
    thanks in advance.

    Hi,
    Most of the instructions you have mentioned , already was configured.
    except for the tmp and temp directories.
    And even I changed them from System Properties >> Advanced >>  Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
    I attach the conf_VIS.txt file because I thought it may help.
    http://www.4shared.com/document/1bS6aio5/conf_VIS.html
    Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
    Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
    http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
    Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

  • Database logon failed when deploy CR on Windows Server 2008

    I use Crystal Reports for Visual Studio 2010 Production Release with MVC 2 web aplication and SQL Server 2008 database server. When I compile/run from VS 2010 it running well, but when deploy it on Windows Server 2008, when load certain report (Not All report) face the following exception message:
    Database logon failed
    Stack Trace is as the following:
    at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) at SequisLife.Controllers.ReportController.run_report(String report_name, IDictionary`2 dic_param)
    InnerException:
    System.Runtime.InteropServices.COMException (0x8004100F): Database logon failed. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    run_report method is as the following:
    private ActionResult run_report(string report_name, IDictionary<string, string> dic_param)
                string ls_respon = "";
                try
                    get_sqllogin();
                    ReportClass rptH = new ReportClass();               
                    rptH.FileName = Server.MapPath(VirtualPathUtility.ToAbsolute(report_name));
                    rptH.Load();             
                    rptH.Refresh();
                    Database crDataBase;
                    Tables crTables;
                    TableLogOnInfo crTableLogOnInfo;
                    ConnectionInfo reportConnectionInfo = new ConnectionInfo();
                    reportConnectionInfo.ServerName = server;
                    reportConnectionInfo.DatabaseName = database;
                    reportConnectionInfo.UserID = login_user;
                    reportConnectionInfo.Password = login_pass;
                    crDataBase = rptH.Database;
                    crTables = crDataBase.Tables;
                    foreach (Table crTable in crTables)
                        crTableLogOnInfo = crTable.LogOnInfo;
                        crTableLogOnInfo.ConnectionInfo = reportConnectionInfo;
                        crTable.ApplyLogOnInfo(crTableLogOnInfo);                  
                    ParameterFields lpf_parameters = rptH.ParameterFields;
                    if (lpf_parameters.Count > 0)
                        foreach (ParameterField lpf_param in lpf_parameters)
                            var llst_tmps = dic_param.Where(d => d.Key == lpf_param.Name);
                            foreach (var param in llst_tmps)
                                if (param.Key == lpf_param.Name)
                                    if (lpf_param.ReportName == "")
                                        rptH.SetParameterValue(lpf_param.Name, param.Value);
                                    else
                                        rptH.SetParameterValue(lpf_param.Name, param.Value, lpf_param.ReportName);
                    Stream stream = rptH.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
                    return File(stream, "application/pdf");
                catch (Exception ex)
                    ls_respon += ex.Message;
                    ls_respon = " - "ex.StackTrace;
                    ls_respon += " - " + ex.InnerException;
                    ls_respon += " - " + ex.Source;
                    ls_respon += " - " + ex.Data;
                    return Content(ls_respon);
    Please any body hepl me...
    Thank's in advance

    Hi,
    I am using CR with visual studio 2010 in windows 7 box 64bit box. using a ADO.net data source. And I need to export .rpt as pdf.The solution works fine in my dev box. by when i try to deploy in a windows server 2008 R2 box (64bit) it fails . Both my dev box and deplyment box uses sql server 2008 DB . Also i am using .Net framework 4.0 (not client profile)
    installed the following things in deployment box:
    1. CRRuntime_64bit_13_0_1.msi in
    2. Also copied the CRforVS_mergemodules_13_0_1 in C:\Program Files (x86)\Common Files\Merge Modules
    I get the following error in my Box:
    CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)   at Tesco.Instore.PickingControl.ReportController.PrintDriverDocumentation(String driverDocumentation, Int32 vehicleTripId)] 20/10/2011 08:08:41        PCS        Critical                   Classic .NET AppPool      Error running End of Van [Logon failed.
    Error in File temp_31b3196f-fd25-45c8-b657-5d9cd7c9dccb {4F74290C-D56E-4FC4-8DEF-371BB5C5B10B}.rpt:
    Unable to connect: incorrect log on parameters.]
    I also verified the database connection is upto date. while creating the solution
    the project build is set to anyCPU.
    is there anything else i have to install ?? Please help me ..I am trying this thing from last one week and have not got any proper solution till now

  • Macbook clients cannot connect to Windows Server 2008 RRAS with L2TP/IPSec

    Hi everyone,
    I had installed "Remote and Routing Access" or a VPN server on Windows Server 2008. The connection type set up is L2TP/IPSec. All the Windows clients can connect to the L2TP/IPSec VPN server without problem but Macbook users are facing problem.
    The Macbook users got the error message "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator."
    I think it is something related to the pre-shared key encryption but I am not sure. The Macbook users could connect if the connection type is changed to PPTP on server and clients side. I searched for similar problems and solutions online but no luck, I couldn't find solution that helps. I found this is a common problem faced by many macbook users.
    Does anyone have a solution or suggestion for this, please? I appreciate all the helps and suggestion given.
    Thanks,
    CK

    Hi,
    Thanks for the question, however, this forum is for Remote Desktop Clients related questions.
    Regarding the issue, as Windows clients can connect with no problem, I suspect that it is a Mac side issue and I would like to suggest you contact Apple support for help.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Error starting forms and reports manageed servers on windows server 2008

    Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
    [2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
    [] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
    [APP: em] Falta la configuración de registro o no es válida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
    any suggestions?
    weblogic 10.3.4
    forms 11.1.1.4
    windows server 2008 x64
    JDK :java 6u30 x64

    delete all, re-install all... ok

  • Windows Server 2008 R2 DNS service issue with BitLocker

    I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
    The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
    When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
    Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
    When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
    and recovery dialog because the OS failed to boot.
    I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
    Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
    Any help would be greatly appreciated as this system cannot be booted in its current state.
    Peter C. Hesse Network/Systems Administrator

    Hi,
    I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
    So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
    So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
    manage-bde /?
    manage-bde -autounlock -enable Driveletter:
    But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
    Below are some links that might help:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
    Hope this helps.
    Regards,
    Calin

  • Windows Server 2008 R2 and Windows 7 DNS Problem

    Hi,
    I have a DNS Server hosted in Windows Server 2008 R2 and our clients are using Windows 7. All are working fine then suddenly there are times that our client cannot access our internal site and cannot connect with our IM which is also hosted in the server.
    Tried to ping the server's IP but got this result: 
    Ping request could not find host .com. Please check the name and
     try again.
    NSLookup works fine. Tried to use the ip address instead of the domain name and it works. Resetting network connection seems to resolve the issue but we cannot do it all the time especially when we have hundreds of computers in our office. Anyone have ideas
    regarding this?

    Hi,
    “Resetting network connection seems to resolve the issue but we cannot do it all the time especially when we have hundreds of computers in our office. Anyone have ideas regarding
    this?”
    It seems is the client IP address conflict, it may cause by your DHCP Conflict Detection Attempts value setup is not appropriate. You can try to set Conflict Detection Attempts
    to a value other than 0.
    More information:
    Detect and Avoid IP Address Conflicts
    http://technet.microsoft.com/en-us/magazine/ff606371.aspx
    Hope this helps
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to install external DNS Server on Windows server 2008?

    After 2 days hard working I'm confused about DNS servers.
    i registered a domain name and want to host my own DNS for my website.
    i install DNS Role and IIS on a windows server 2008 R2 and config them all and set 127.0.0.1 and 8.8.8.8 on my network interface on my serve .
    on my server i have 2 website
        dns1.mysite.com //to set it on my domain panel as name server
        mysite.com      //hosting
    now everything work on my server , when i type mysite.com at my web browser i can see my site.and when i ping mysite.com it reply my server static ip.
    but on internet it does not work. i mean if you type dns1.mysite.com or mysite.com not works and i got request time out when i ping theme.
    at this state if you set my server IP as DNS server at your network adapter(interface) everything work great.
    how can i have a DNS Server like that hosting using on our domains like dns1.godaddy.com ?
    i should register my DNS on any where like a organization or website or...?

    For the local nic you should _always_ configure dns servers that have the same scope. I think 8.8.8.8 and 127.0.0.1 will never have the same scope. Note that the configuration of multiple dns servers is only there for failover purposes. If the first one
    is working, the second one is never used.
    You should create a zone on your dns server matching your domain, and you should request your registrar to make your server authorative over your zone. Some providers let you configure this yourself (on a weninterface), so please consult the documentation
    provided by the service provider/registrar. If in doubt, they will be the primary contact point as the required configuration depends on theirs.
    Note that when you want to host a public dns server, the server should be reachable from the internet on port 53 tcp/udp and you should follow guidelines for serrver security very strictly. 
    Also be aware updates on dns servers need some time to be applied worldwide due to caching that has to expire and zone transfers that might be needed. be patient.
    MCP/MCSA/MCTS/MCITP
    Thanks SenneVL for your nice answer .
    my server IP is static and reachable from Internet,then why when you add my server ip on your network adapter as a DNS it works and you can type mysite.com on your browser and see my site?
    you said "Also be aware updates on dns servers need some time to be applied worldwide due to caching that has to expire and zone transfers that might be needed. be patient."
    how long it takes?

  • Some Hostname is not seen in DNS Manager ( Windows Server 2008 )

    Hi All,
    DC Server OS - Windows Server 2008 R2 ( Active Directory Integrated DNS Zone ) Client OS - Windows 7
    I am unable to understand, why some hostname are not dynamically registered in DNS Manager. For example -My windows7 which is added to corp.abc.com domain. Don't show in DNS manager.
    I don't want to create this hostname statically on DNS manager.
    I have tried couple of resolution i.e ipconfig /registerdns, restarted DNS Client / DHCP Client server, restarted computer still unable to see hostname name entry in DNS manager. 2 days has passed, still it has not come-up in DNS manager. I have also check
    Advanced TCP/IP settings. Please see print-screen of nslookup & Advanced TCP/IP Settings.
    Kindly suggest, what should i do, to resolve this problem.
    Thanks & Regards,
    Param
    Thanks & Regards,
    Param
    www.paramgupta.blogspot.com

    I would first recommend checking that Dynamic DNS updates are configured (I would recommend having it set to Secure only).
    I started yesterday a Wiki article describing that: http://social.technet.microsoft.com/wiki/contents/articles/21984.how-to-secure-dns-updates-on-microsoft-dns-servers.aspx
    Please also check that your primary DNS suffix using ipconfig /all. It should be matching the computer domain name. If anything is wrong, you can change it by using the following: http://social.technet.microsoft.com/Forums/windowsserver/en-US/3720415a-6a9a-4bca-aa2a-6df58a1a47d7/change-primary-dns-suffix?forum=winservercore
    If this do not help, you can try to temporary disable your security software installed on your computer, check the network filtering and use Wireshark to see what happens when you run
    ipconfig /registerdns.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Installation & setting OBIEE 10.1.3.4.1 on Windows Server 2008 r2

    Hi Gurus,
    I am able to install the OBIEE software help of below thread.
    OBIEE - Windows Server 2008
    Then i face issues like not able to connect to ODBC and other then i googled i found the below link.
    http://oraclebiblog.blogspot.com/2009/06/installing-obiee-on-64-bit-windows-os.html
    I followed the steps given in this blog except set 2. a.) and b.) as i cant find the folders on the server.
    The problem is Once i log in I am able to view the first report on my welcome page but i cant travers from one tab to another nor to different Dashboard. when i Click on the Edit dashboard i am able to. i am able to create go to answers But i cant go to the different dashboard pages. I have go to link on some of the dashboard pages with that help i can travers from one dashboard page to another. One more thing i noticed that Charts are not displaying and Conditional formating also not displaying. I dont no why something is working something not.
    Please help me its very urgent and kind a risk of my J.
    Regards
    Ali
    Edited by: @l**** on Apr 21, 2011 2:17 PM

    Change the ODBC driver with OCI driver in the connection pool. Download and install oracle instant client if you don't have any Oracle fat client on the machine where is OBIEE.
    Good tutorial to install oracle instant client:
    http://www.dbatoolz.com/t/installing-oracle-instantclient-basic-and-instantclient-sqlplus-on-win32.html
    don't forget to restart all OBIEE services...
    Regards,
    E.

  • Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

    Hi,
    Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
    DC:windows Server 2008 R2
    Domain functional level:Windows Server 2003
    When Winxp join domain, have no this error message.
    I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
    There have 3 suggestion in this article:
    1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
    Doesnt's work.
    2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
    On my DC, I run netstat -an, reslut as below:
     UDP    192.168.20.3:137       *:*
    3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
    We are not using IPV6.
    This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
    Please help to check this issue.
    Thank you very much.
    BR
    Guo YingHui 

    Hi Guo Ying,
    I have faced this critical error which makes over-writes the host names in the domain when you join.
    For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
    When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
    Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
    Final Resolution is as follows:
    You need to start the dns console on the DC & drop down the domain name.
    Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
    You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
    After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
    Regards
    Anand S
    Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

  • Macs will not show up on DNS Windows Server 2008 R2

    In our office, we have a Windows Server Infrastructure with several Macs (Imacs, mac pros, macbook airs etc).
    Active Directory and DNS is running off a Windows Server 2008 R2 Server, with DHCP on a Cisco Router.
    DHCP is configured to direct all DNS entries to the Windows DNS Server.
    The problem that I'm having is that, while all windows machines show up on the Windows DNS Server, None of the Macs are registered. Macs are able to utilize the DNS Server correctly, but will not register on the DNS Listings.
    Because I cannot access or ping Macs via their hostname, I cannot tell our third party backup software to point to a particular machine. Our workstations are all DHCP enabled, and since assigning a static ip to all the Macs here is not an option, I need to get this working, so that I can get our macs backing up.
    I've followed a few similar articles, but they appear to be for older 2003 servers, which the 2008 R2 servers do not have those options. I do not want to join the Macs onto the windows domain, I merely want to get them registered on our DNS server.
    The mac operating systems vary between Snow Leopard to Mountain Lion
    https://discussions.apple.com/thread/1421684?start=0&tstart=0 <--- Article I was following
    Thanks,
    Rboelens

    I'm pretty sure that the DNS registration stuff is part of the Active Directory plug-in on OS X.  I'd recommend you give it a try.
    GPOs are not enforced on the Macs if they're bound to Active Directory, _unless_ you've extended the Active Directory schema (which is a lot of work).  The main benefits to joining Macs to AD ar:
    * Centralized password management and policies (as you've defined in AD).
    * Single sign-on to various kerberized resources (i.e. Windows share points and internal web pages if you're using IIS and you use Kerberos to secure them, rather than NTLM).
    Here's an Apple white paper which may help.  I would recommend you read this carefully and then decide whether or not you want to bind the Macs to AD.  I'd also recommend you test with a bound Mac to see if resolves this "host name in DNS" issue... I suspect it will.
    http://training.apple.com/pdf/wp_integrating_active_directory_ml.pdf

  • How to download oracle patch set 10.2.0.5  for Windows server 2008 R2

    I need  download and install oracle patch set 10.2.0.5 and install  for Windows server 2008 R2 (notes 1486772).
    But I  get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
    Help me, please!

    Hi,
    Have you looked at this location https://service.sap.com/oracle-download ?
    Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
    Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
    Regards,
    Bhavik G. Shroff

  • Access Denied DNS Server 'Windows Server 2008 R2 and Install AD (PDC) and ADD (BDC=Additional AD)

    hi 
    I Have 
    Windows server 2008 R2 and Install Active Directory 
    Install and configuration for windows server 2008  PDC (Primary Domain Controller) and BDC (Additionall Domain Controller)
    Error
     A security Package specific Error Occurrred. would you like to add it anyway
    and 
    Access Denied Console Other Domain AD 
    and Nslookup 
    C:\Users\admin>nslookup pdc
    Server:  bdc.*.*
    Address:  10.0.X.X
    Name:    pdc.*.*
    Addresses:  10.0.1.11
              10.0.X.X

    Hello,
    your description is a bit confusing. You get the error message when you try to add the other DC to the DNS management console on one machine?
    Both DCs belong to the same domain according to your description?
    Please post an unedited ipconfig /all from both DC/DNS servers here.
    BTW: PDC/BDC concept is gone since the start from AD with Windows 2000 Server. All DCs are the same, difference are only the FSMO roles, still that can be held from any DC in the domain according to some rules.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Maybe you are looking for