Windows service entered the stopped state
hello,
my windows service running on Windows Server 2008 R2 SP1 stopps two or three times per month undefined with the Event ID 7036 : service entered the stopped state. 10 mins later it starts again alone: service entered the running state.
What I also see is that some other services enter in the stopped state and then enter the running state: with Event ID 7036, but more frequently, means several times per day:
SoftwareProtectionService
WindowsModuleInstaller
ApplicationExperience
WMI Performance Adapter
Portable Device Enumerator Service
What is the problem here, I could not find any solution yet.
thx
Hi,
Sometimes services are started only when they are needed. Most services you listed are Manual in startup type which means they will be started manually when it is needed.
Also if you disable a service manually, dependency services will also be stopped.
Here are 2 threads which mentioned 2 services in your list and they are also start/stop even 10 minutes.
Windows Modules Installer Stops & Restarts Frequently
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d8e192ed-92ff-451b-9646-add8214c4e84/windows-modules-installer-stops-restarts-frequently
7036 - Service entered the stopped/started state Messages
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8360b321-8225-42f1-a3e8-a75020dad227/7036-service-entered-the-stoppedstarted-state-messages
Similar Messages
-
The Software Protection service entered the running state.
I noticed this event fire once in minute.
I can't see tree from leaves in System Log
Log Name: System
Source: Service Control Manager
Date: 18.10.2012 08:44:17
Event ID: 7036
Level: Information
Keywords: Classic
Description:
The Software Protection service entered the running state.
Only big before that is that, I enabled BitLocker ??
Some idea ?Hello,
Has anything been found out about this? We're running into the same issue except that it's logging every 30 seconds.
Here's some info from the machines and when it's occurring:
It only occurs when someone is connected to the machine through Remote Desktop.
The machines are Amazon EC2 instances.
Seems to only happen on machines that are connecting to RODC's.
Machines have limited connection to RODC's through security groups (machine based firewalls).
They are Windows Server 2012 instances, small and medium instance types. (See instance type details here: http://aws.amazon.com/ec2/instance-types/instance-details/)
Little or no extra software installed. These were spun up from a basic WS2012 image and it started occurring shortly after. There are other machines launched from the same image that do not have this issue.
There are also some other machines connecting to the same RODC's with the same security group (firewall) settings that are not experiencing this issue.
We are just using the standard Remote Desktop, not the 2012 Remote Desktop Services. We have tried to install this but the install always fails. See: http://social.technet.microsoft.com/Forums/windowsserver/en-US/3ab983ce-9290-49ec-81e6-a3adf34cb8b2/remote-desktop-services-failed-on-windows-2012-server-amazon-vpc-ec2
The machines (the ones having this issue as well as the ones that do not have it) all have the exact same Windows updates installed.
Here is the detail of the event:
NOTE: Every 30 seconds it logs this exact message - entered the RUNNING state. I do not see other messages stating it entered the Stopped state.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="16384">7036</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-08-01T12:23:10.519607800Z" />
<EventRecordID>35726</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="588" />
<Channel>System</Channel>
<Computer>REMOVED</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Software Protection</Data>
<Data Name="param2">running</Data>
<Binary>7300700070007300760063002F0034000000</Binary>
</EventData>
</Event>
Any help or insight would be greatly appreciated...
Thanks!
Jeff -
Creating the Windows Service for the Database Instance
Hello, I am using the PeopleTools 8.52 Installation for Oracle documentation and was in Task 6A-2: Creating the Windows Service for the Database Instance.
After I type in
oradim -new -sid ORCL -intpwd manager -startmode auto -pfile C:\Oracle\database\initORCL.ora
I had encountered these errors:
OPW-00005: File with same name exists - please delete or rename
DIM-00019: create service error
O/S-Error: (OS 1073) The specified service already exists.
Please advise.... Thank you in advance!Hi, thank you for your reply!
After I typed oradim -delete -sid ORCL, it shows this:
Unable to stop service, OS Error = 1062
Instance deleted.
Then, I:
Set ORACLE_SID=ORCL
oradim -new -sid ORCL -intpwd manager -startmode auto -pfile C:\Oracle\database\initORCL.ora
Then, it shows:
OPW-00005: Files with same name exists - please delete or rename
Instance created.
Does it mean no error already and I can proceed? -
Windows service does not stop when DB is shutdown from SQL*Plus
I have a 11g XE DB in a Windows 7 machine.
The installation has created a Windows service called OracleServiceXE. It's status is STARTED.
I then login to SQLPLUS as sysdba and do a shutdown immediate;
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
Problem is, when I refresh the services, the OracleServiceXE is still showing as STARTED.
If I use the listener control to stop the listener the Windows service OracleXETNSListener changes status to BLANK.
Why is this?tvCa-Oracle wrote:
That service is a prerequisite Windows service to be able to start the database, but it is not the status of the database itself.
When you do start the database, he may or may not start the service automatically (not sure there), but it is a needed service, for each database SID, on Windows.
If you want to know what it is, open Task Manager or Process Explorer, only start the service (not the database), and see which OS process is launched.
AFAIK, this is only on Windows, there's no comparable component on Linux/Unix for this.
The Windows service OracleServiceXE has c:\app\oracle\product\11.2.0\server\bin\ORACLE.EXE XE as the Parth to executable.
If I click on the Services tab in Task manager, then right-click the OracleServiceXE and click Go to process, it show the oracle.exe in the processes tab.
If stop it, the service, from the Windows service control, the oracle.exe disappears and we cannot login to the DB.
If we start the service from the windows service control, the oradim.exe appears, then a second later the oracle.exe appears. Once the DB status of the Windows service is STARTED, the oradim.exe disappears.
So, I can start and stop the oracle DB with the Windows service. But If I stop the DB from sql*plus the the service is not stopped.... -
The STOP statement was used outside a report flow.
Hi Gurus,
when i am executing this program it is going to short dump.
pls help me out.
thanks in advance.
Runtime Errors STOP_NO_REPORT
Date and Time 06.10.2008 12:10:06
Short text
The STOP statement was used outside a report flow.
What happened?
Error in the ABAP Application Program
The current ABAP program "YMRP0003" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The STOP statement is only useful in specific events of the report
processing (that is, the execution of a type 1 program). In this case,
there was no report flow, so the statement could not be executed.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
System environment
SAP-Release 700
Application server... "ciRDE"
Network address...... "10.131.28.7"
Operating system..... "HP-UX"
Release.............. "B.11.23"
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "hpx190"
Database type..... "ORACLE"
Database name..... "RDE"
Database user ID.. "SAPDAT"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 21 2008 20:48:34"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 157
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "HP-UX B.11"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 65536
MM Used. 3492016
MM Free. 695200
User and Transaction
Client.............. 050
User................ "MBAGGALA"
Language key........ "E"
Transaction......... "CC31 "
Transactions ID..... "48E9EB60C2944602E10000000A831C07"
Program............. "YMRP0003"
Screen.............. "SAPMC29C 0020"
Screen line......... 22
Information on where terminated
Termination occurred in the ABAP program "YMRP0003" - in "SCM-MRP-FSE-12_02".
The main program was "SAPMC29C ".
In the source code you have the termination point in line 138
of the (Include) program "YMRP0003".
Source Code Extract
Line
SourceCde
108
109
110
*This function module read the status of an object
111
112
CALL FUNCTION 'STATUS_TEXT_EDIT'
113
EXPORTING
114
client = sy-mandt
115
flg_user_stat = lc_flagx
116
objnr = ls_ecm_data-objnr
117
only_active = lc_flagx
118
spras = sy-langu
119
IMPORTING
120
line = lf_sttxt
121
user_line = lf_asttx
122
EXCEPTIONS
123
object_not_found = 1
124
OTHERS = 2.
125
126
CHECK NOT sy-tcode EQ 'CC32'.
127
*-- Begin of Changes made by DGupta1 on 07/12/2006--
128
Changes are made to update the Change Number Dates While Calling CC32
129
from custom transaction YC06 only
130
CHECK NOT sw_yc06 EQ 'X'.
131
*-- End of Changes made by DGupta1 on 07/12/2006--
132
133
CHECK NOT lf_sttxt CS 'ECCM' AND NOT lf_sttxt CS 'ECOR'.
134
135
136
IF ls_ecm_data-datuv NE lc_maxdate.
137
MESSAGE s011.
>>>>>
STOP.
139
ENDIF.
140
141
142
IF lf_lastd < lf_artwd.
143
MESSAGE s012.
144
STOP.
145
ENDIF.
146
147
IF ls_ecm_data-lvorm = lc_flagx.
148
MESSAGE s013.
149
STOP.
150
ENDIF.
151
152
WRITE: lf_lastd TO lf_lastd_string.
153
WRITE: lf_artwd TO lf_artwd_string.
154
155
156
IF ls_ecm_data-ccart NE lc_fixd.
157
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
1
SY-FDPOS
40
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ARC0H
SY-UCOMM
FCBU
SY-TITLE
Create ECR: Object Types
SY-MSGTY
S
SY-MSGID
YMRP
SY-MSGNO
011
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081006
SY-UZEIT
121006
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
7 FORM YMRP0003 YMRP0003 138
SCM-MRP-FSE-12_02
6 FUNCTION SAPLXCCA ZXCCAU05 39
EXIT_SAPMC29C_005
5 FORM SAPMC29C MC29CFS1_SAVE_USER_EXIT 36
SAVE_USER_EXIT
4 FORM SAPMC29C MC29CFF2_FCODE_FCBU_EXECUTE 88
FCODE_FCBU_EXECUTE
3 FORM SAPMC29C MC29CFO1_OKCODE_CHECK 252
OKCODE_CHECK
2 MODULE (PAI) SAPMC29C MC29CI10_OKCODE 12
OKCODE
1 MODULE (PAI) SAPMC29C MC29CI10_DYNPRO_CALL 11
DYNPRO_CALL
Chosen variables
Name
Val.
No. 7 Ty. FORM
Name SCM-MRP-FSE-12_02
SY-REPID
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
SY-TCODE
CC31
00000000000000000000
00000000000000000000
44332222222222222222
33310000000000000000
SW_YC06
0
0
2
0
LF_STTXT
CRTD
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
4554222222222222222222222222222222222222
3244000000000000000000000000000000000000
SYST-REPID
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
LS_ECM_DATA-DATUV
20081006
00000000
00000000
33333333
20081006
LC_MAXDATE
29991231
00000000
00000000
33333333
29991231
%_PRINT
000 0###
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
YMRP
00000000000000000000
00000000000000000000
54552222222222222222
9D200000000000000000
LC_FLAGX
X
0
0
5
8
SPACE
0
0
2
0
SY-MSGNO
011
000
000
333
011
LC_ITEM
EUR_SCM-PUR-FSE-12_02
000000000000000000000
000000000000000000000
455554425552454233533
552F33DD052D635D12F02
SY-MSGV1
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV3
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV4
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
LF_LASTD
00000000
00000000
00000000
33333333
00000000
LF_ARTWD
00000000
00000000
00000000
33333333
00000000
SY-SUBRC
0
0000
0000
No. 6 Ty. FUNCTION
Name EXIT_SAPMC29C_005
ECM_ALT_DATE
Table IT_665[0x202]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_ALT_DATE
Table reference: 113
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 000000710000029900000000000000CAFFFFFFFF
TABH+ 40(16) = 040000DB000006200010249401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 113 (0x00000071)
label = 665 (0x00000299)
fill = 0 (0x00000000)
leng = 202 (0x000000CA)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000018
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_DATA
050 01001020081006 00000000 00000000 dsfasdddffSS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3332222222222223333333333333322222222222233333333222222222222333333332222222222226766766666552
0500000000000000100102008100600000000000000000000000000000000000000000000000000004361344466330
ECM_EFFECTIVITY
Table IT_666[0x464]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_EFFECTIVITY
Table reference: 126
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000007E0000029A00000000000001D0FFFFFFFF
TABH+ 40(16) = 040000DB000006800010249401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 126 (0x0000007E)
label = 666 (0x0000029A)
fill = 0 (0x00000000)
leng = 464 (0x000001D0)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000020
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_HIERARCHY
Table IT_667[0x120]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_HIERARCHY
Table reference: 110
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000006E0000029B0000000000000078FFFFFFFF
TABH+ 40(16) = 040000DB000006B00010249401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 110 (0x0000006E)
label = 667 (0x0000029B)
fill = 0 (0x00000000)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000021
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_MNT_VALUE
0000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222223333333333333333222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ECM_OBJMNGREC
Table IT_668[0x600]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_OBJMNGREC
Table reference: 107
TABH+ 0(20) = 0000000000000000000000000000000000000000
TABH+ 20(20) = 0000006B0000029C0000000000000258FFFFFFFF
TABH+ 40(16) = 040000DB000005C0001024C401800000
store = 0x0000000000000000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 107 (0x0000006B)
label = 668 (0x0000029C)
fill = 0 (0x00000000)
leng = 600 (0x00000258)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000016
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ECM_OBJ_TYPE
Table IT_669[28x192]
\FUNCTION=EXIT_SAPMC29C_005\DATA=ECM_OBJ_TYPE
Table reference: 116
TABH+ 0(20) = C0000009448BF3E0000000000000000000000000
TABH+ 20(20) = 000000740000029D0000001C000000C0FFFFFFFF
TABH+ 40(16) = 040000DB000005600010249421800000
store = 0xC0000009448BF3E0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 116 (0x00000074)
label = 669 (0x0000029D)
fill = 28 (0x0000001C)
leng = 192 (0x000000C0)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000014
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC0000009448B8270
pgHook = 0xC0000009448BF440
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 195 (0x000000C3)
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x00000030)
lineAlloc = 48 (0x00000030)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x00000002)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
TRANS_TYP
H
0
0
4
8
D_ASTTX
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
SY-REPID
SAPLXCCA
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454544422222222222222222222222222222222
310C833100000000000000000000000000000000
L_ITEM
EUR_SCM-MRP-FSE-12_02
000000000000000000000000000000
000000000000000000000000000000
455554424552454233533222222222
552F33DDD20D635D12F02000000000
LI_YBS00001
050EUR_SCM-MRP-FSE-12_02 YMRP0003 SCM-MRP-FSE-12_02
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3334555544245524542335332222222225455333322222222222222222222222222222222544245524542335332222
050552F33DDD20D635D12F020000000009D2000030000000000000000000000000000000033DDD20D635D12F020000
SY-SUBRC
0
0000
0000
SYST
#######################(###############Z################################################XC####
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000E000100
0000000000000000000000020000000000000005000000000100000000000000000000000000010900000001540000
0000000100000A0000000108010001000000000A0000000000000000000000000000000000000B000008000083000C
LI_YBS00001-REPORT
YMRP0003
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5455333322222222222222222222222222222222
9D20000300000000000000000000000000000000
LI_YBS00001-FORM
SCM-MRP-FSE-12_02
000000000000000000000000000000
000000000000000000000000000000
544245524542335332222222222222
33DDD20D635D12F020000000000000
LS_YBS00001
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LS_YBS00001-ENABLED
0
0
2
0
LS_YBS00001-REPORT
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
LS_YBS00001-FORM
000000000000000000000000000000
000000000000000000000000000000
222222222222222222222222222222
000000000000000000000000000000
SYST-REPID
SAPLXCCA
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454544422222222222222222222222222222222
310C833100000000000000000000000000000000
No. 5 Ty. FORM
Name SAVE_USER_EXIT
RET_CODE
0
0000
0000
SY-SUBRC
0
0000
0000
SY-MSGID
YMRP
00000000000000000000
00000000000000000000
54552222222222222222
9D200000000000000000
DARSTAB[]
Table[initial]
AEDTB[]
Table IT_650[0x202]
\PROGRAM=SAPMC29C\DATA=AEDTB[]
Table reference: 129
TABH+ 0(20) = 0000000000000000C000000944A25D7000000000
TABH+ 20(20) = 000000810000028A00000000000000CAFFFFFFFF
TABH+ 40(16) = 0400000000000EF00010249401800000
store = 0x0000000000000000
ext1 = 0xC000000944A25D70
shmId = 0 (0x00000000)
id = 129 (0x00000081)
label = 650 (0x0000028A)
fill = 0 (0x00000000)
leng = 202 (0x000000CA)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000065
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0xC000000944AFAD80
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC000000944A23AF0
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
CC07
000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000
222222222222222222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000000000000000000
AENRB
050 01001020081006 00000000 00000000 dsfasdddffSS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3332222222222223333333333333322222222222233333333222222222222333333332222222222226766766666552
0500000000000000100102008100600000000000000000000000000000000000000000000000000004361344466330
DARSTAB
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
22222222222222222222222222222222222222222200
00000000000000000000000000000000000000000000
AEEFB[]
Table IT_651[0x464]
\PROGRAM=SAPMC29C\DATA=AEEFB[]
Table reference: 105
TABH+ 0(20) = 0000000000000000C000000944AFADF000000000
TABH+ 20(20) = 000000690000028B00000000000001D0FFFFFFFF
TABH+ 40(16) = 0400000000000F500010249401800000
store = 0x0000000000000000
ext1 = 0xC000000944AFADF0
shmId = 0 (0x00000000)
id = 105 (0x00000069)
label = 651 (0x0000028B)
fill = 0 (0x00000000)
leng = 464 (0x000001D0)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000067
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0xC0000009448F3220
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC00000094482B060
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
DCTAB[]
Table IT_35[7x16]
\PROGRAM=SAPMC29C\DATA=DCTAB[]
Table reference: 25
TABH+ 0(20) = C000000944921280000000000000000000000000
TABH+ 20(20) = 00000019000000230000000700000010FFFFFFFF
TABH+ 40(16) = 0400000000001BB00010249401800000
store = 0xC000000944921280
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 25 (0x00000019)
label = 35 (0x00000023)
fill = 7 (0x00000007)
leng = 16 (0x00000010)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000133
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)Dear Rajesh!
Please advise me, what have you done to resolve your problem!!??
I get next problem when i try to start some transaction:
Short text
Syntax error in program "SAPLPA_PACKAGE_SERVICES ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLPA_PACKAGE_SERVICES " in
include "LPA_PACKAGE_SERVICES$25 " in
line 13:
"The type "TPCHK_FROZEN_OBJECTS_H" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLPA_PACKAGE_SERVICES :
"The type "TPCHK_FROZEN_OBJECTS_H" is unknown."
Trigger Location of Runtime Error
Program SAPLSFW_COMMON
Include LSFW_COMMONU01
Row 117
Module type (FUNCTION)
Module Name SFW_GET_SWITCHPOS
Source Code Extract
Line
SourceCde
87
IF sy-subrc = 0.
88
<fs_switchpos>-switch_id = devc_resultline-switch_id .
89
<fs_switchpos>-state = devc_resultline-state .
90
<fs_switchpos>-text = devc_resultline-text .
91
92
INSERT <fs_switchpos> INTO TABLE resulttab. "Ergebnis merken
93
CONTINUE.
94
ENDIF.
95
96
97
READ TABLE gt_sfw_package INTO wa_sfw_package WITH TABLE KEY
98
devclass = lf_devclass
99
version = 'A' .
100
101
IF sy-subrc = 0. "Objekt ist in einem Paket mit Schalter
102
<fs_switchpos>-switch_id = wa_sfw_package-switch_id .
103
104
ELSE. "gucken, ob es sich um geschachtelte Pakete handelt
105
106
DO 20 TIMES.
107
108
CLEAR wa_superpackage .
109
110
READ TABLE gt_superpackage INTO wa_superpackage WITH TABLE KEY
111
devclass = lf_devclass.
112
113
IF sy-subrc = 0 .
114
lf_superpackage = wa_superpackage-parentcl.
115
ELSE.
116
>>>>>
CALL FUNCTION 'PA_GET_SUPER_PACKAGE_NAME'
118
EXPORTING
119
i_package_name = lf_devclass
120
i_direct_select = 'X'
121
IMPORTING
122
e_super_package_name = lf_superpackage.
123
124
125
wa_superpackage-devclass = lf_devclass .
126
wa_superpackage-parentcl = lf_superpackage .
127
INSERT wa_superpackage INTO TABLE gt_superpackage .
128
129
ENDIF.
130
131
IF lf_superpackage = space .
132
<fs_switchpos>-state = space .
133
<fs_switchpos>-switch_id = space .
134
EXIT. "Enstation !
135
ELSE .
136 -
Obtaining repair or replacement service outside the United States
Hello,
I bought an Asus notebook at Best Buy last November and a GSP plan too.
Now my notebook needs repair outside US.
In the GSP plan we need pay the repair in a manufacturer authorized service center as indicated in the iten "I. Obtaining repair or replacement service outside the United States: To obtain service outside the United States in accordance with your Plan, please locate a manufacturer authorized service center/depot and drop your product off for service."
But i live in São Paulo (Brazil) and i don't know where are located the authorized manufacturer service centers to obtain repair.
Can you help me someway?
Can you indicate me somewhere i can repair my notebook at São Paulo/Brazil?
Tks.Hello samrdg,
I’m sorry your computer is requiring service, but I’m glad to hear that you purchased a Geek Squad Protection plan as it’s helpful for situations like this. While you are correct in that repair costs may be reimbursed, it can be hard to identify which service centers are authorized to repair your computer underneath your plan.
Click here for more information on our international services and how you may obtain service. Please know though that international coverage will not apply to your computer in regards to the following:
· Accidental Damage from Handling coverage
· In-home/on-site service
· Phone/web support
· Preventative maintenance checks
· One-time battery replacement coverage
· One-time accessory replacement coverage
· No Lemon Coverage
If you have any questions or concerns, please don’t hesitate to ask.
Best Wishes!
Alex|Social Media Specialist | Best Buy® Corporate
Private Message -
Integration Server Service 9.3.1 (EIS) entering a stopped state
Integration Server Service (EIS) is stopping multiple times during the day and sometimes during the nightly processing. There seems to be no reason to when or why it stops. Sometimes users may be running drill through reports, sometimes no one is. We don't have that may users that have access to the system for drill through so volume shouldn't be a problem.
I have looked in the OLAPISVR log around the time the service stops, but the log has no error or anything in it about why it stops. It has the statement from whatever the last user is logged was doing and then the next statement is where the service is starting back.
On 7/16/08 the service stopped at 2:56:02. I started the service back at 2:57:09. I had 4 users log on and run drill through reports to make sure it was back up. They ran the reports fine. That was around 3:05. The service went back down again at 3:09:16. This has been going on for about a month. But users have had access to the system for only 2 weeks.
This is the version we are running 9.3.1.0.0 Build-AIS93100B113.
Any help would be appreciated.The user is requesting too much at one time.
The query compiles long IN lists and stops the server.
There is the ability to regulate the depth of the query in the report, but the Excel user can still drag a range and drill thru on too much data. -
BI Scheduler service stuck in stopping state
Whenever I try to stop BI Scheduler service on my machine, it gets stuck in a 'stopping' state and I have to restart the box to get it to work again. When I look at the log, I see the following error.
[nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall
The environment is Windows 2003. If anyone has anyone faced this issue before, can you please share your solution?hi,
No need to restart the box just Click on Task Manager-->Process-->NQScheduler.exe (search for this process) and click on End Process.Thats it and go back to services it will trun to Start mode...
thanks,
saichand.v -
Azure Cloud Service Stuck in "Stopping" state for a long time (12 hours)
Does anyone have suggestions what to do with the issue I have. I tried to stop my Cloud Service the service is now basically stuck in "Stopping" State and been there over 12 hours. In my Cloud service there is 16 Virtual Machines I am using in
testing.
I tried to start Cloud Service but it also failed with error "Could not start the virtual machine deployment.".
Is there something I could do or some way to get Microsoft Support (without paying extra)? I have "Visual Studio Premium with MSDN" so i have no other support but billing from Microsoft :(Managed to find the solution. I stopped and deallocated all the Virtual Machines. After that the Cloud Service status changed to stopped state. After that it was possible to start the Cloud Service again.
-
How to log when windows service is being stopped by server restart c#
I want to handle when windows service is killed by task manager or by system restart.
I tried using below handler inside Timer_Elapsed method of the service timer
public void Start()
AppDomain.CurrentDomain.UnhandledException += CurrentDomain_UnhandledException;
_myTimer= new Timer(10000);
_myTimer.Elapsed += OnElapsed;
_myTimer.AutoReset = false;
_myTimer.Start();
private void OnElapsed(object sender, ElapsedEventArgs e)
try
_myTimer.Stop();
//Work
finally
_myTimer.Start();
and even I have placed the same into Main() method of the console as I am using Topshelf for windows service.
static void Main(string[] args)
AppDomain.CurrentDomain.UnhandledException += CurrentDomain_UnhandledException;
var exitCode = HostFactory.Run(hostConfigurator =>
hostConfigurator.Service<MyService>(serviceConfigurator =>
serviceConfigurator.ConstructUsing(() => new MyService());
serviceConfigurator.WhenStarted(MyService => MyService.Start());
serviceConfigurator.WhenStopped(MyService=> MyService.Stop());
hostConfigurator.RunAsLocalSystem();
hostConfigurator.SetDisplayName("MyService");
hostConfigurator.SetDescription("MyService");
hostConfigurator.SetServiceName("MyService");
hostConfigurator.UseLog4Net();
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
File.AppendAllText(@"C:\Crash.txt", "Main Termination");
In either scenario the handler is not getting called when I kill the windows service process from task manager or system restart. Even TopShelf is not logging "UnhandledServiceException" exit code.
I have searched for all possible ways but no luck. Could any one please help me in this.
ThanksHello RamJS,
You could have a try to use the Process.Exited Event to handle such process end log:
https://msdn.microsoft.com/en-us/library/system.diagnostics.process.exited(v=vs.110).aspx
The Exited event indicates that the associated process exited. This occurrence means either that the process terminated (aborted) or successfully closed. This event can occur only if the value of the
EnableRaisingEvents property is
true.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Windows service start and stop automatically
i'm trying to start windows service, which i installed via running beasvc with parameters. everything used to work fine, but yesterday somthing broke up: i press the start button in the control panel, service tries to start, but then it stops and the following message appears: "Weblogic 9.0 Workspace Service service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." sometimes it stops right after starting without giving any messages.
any ideas what's wrong with it&If I run from a cmd box it shows a successful start, however when I look at the services through the MMC it is not started. Basically, it starts successfully and then immediately shuts off stating the message in the original post. This is after and only after I apply sp7 for BEA 7. If I roll the server back to just v 7, I don't have a problem. I have downloaded V7 twice, and I get the same result. I have followed the install instructions to a T and still the same result. I have also tested removing the user created pages, and I get the same exact error telling me either it's a generic error or, SP7 has issues. The only reason we are rolling to SP7 is because of a security issue, but for the time being we have locked down the firewall. Any other suggestions? I have had my Maximo Administrator contact BEA, and MRO about this problem (Maximo is the only system we use web logic for) and they default to the answer that it is a java issue. That V7 is not supported above java 1.3.xxx which is bull because we were running version 1.4, due to a security issue with JVM 1.3 and all worked well. I have replicated the install with JVM 1.3xxx for BEA 7 sp 7, and that did not solve the problem either. Sorry for the long post I just wanted to try to get all the info out.
Thank you for you time and consideration
Tanner -
What windows services does the Zen Xtra depend
I was disabling services in WinXP to speed up and clean up what boots up in Windows and now my Zen stopped being recognized by the Nomad Explorer as well as MediaSource. MediaSource actually crashes completely now if the Zen is hooked up.
I'd hate to turn all my services back on but if someone knows right off hand, that'd be helpful. Thanks
JayIt's difficult to know with services because it could be piggy backing off something else.
The Creative CD ROM service is the only one I can think of that's directly Creative.
But I'd be interested to know if you find out... -
Does any windows service affects the device driver wake up time?
Is it possible for a windows service running on Win 8.1 (64 bit) to delay the wake up time of any device driver?
One possibility could be where the driver has any dependency on any other driver/service.
In this case, I checked the driver's INF file and there is no dependency section.
The driver start up type is service_demand_start and driver type is kernel driver.
Any help on this is greatly appreciated.Are you asking if a service can impact when the driver is started or when it is woken up after hibernation? For a demand start driver they start when they are needed so depending on the driver yes it could only be started after the service does an
action. You have eliminated the dependency section, but is the driver for actual hardware? If yes then it is highly unlikely the service can impact it. If no, then the service could be the starting it with StartService, or forcing its enumeration
and starting.
If you are talking the hibernation case, no there is impact.
Don Burn Windows Driver Consulting Website: http://www.windrvr.com -
I got a new laptop today and after downloading firefox I tried to use the synk feature and it says I have to add device on my old computer. In following the directions I never get to the screen to enter the codes from my new computer onto the old one. When I click add device on the old computer it takes me to the help page on the web with the same directions that took me there in the first place! So, how am I supposed to synk my new computer if I can't add device on the old or simply log in to my synk account on the new?
Ok, I figured it out, I clicked "i don't have device available" and it let me log in to my account.
-
Windows Service Hosted workflow, Stop it with ServiceOperation call?
I am working on a POC for Scheduling Workflows. I have a workflow hosted with Workflow Services Host. Using a While activity I loop while KeepRunning = true. Using Pick-->PickBranch I have two ServiceOperations running in Receive activities in each
Branch. There is a StartWorkflow ServiceOperation in one branch and a StopWorkflow ServiceOperation in another branch. The StartWorkflow operation basically just runs another Workflow called RunWorkflow with a calculated Delay activity between each
completion. It will loop indefinitely on that RunWorkflow activity until the KeepRunning is set to false. The StopWorkflow ServiceOperation is what changes the KeepRunning flag to false. My problem is that the StartWorkflow operation never completes so that
the Messaging directed to StopWorkflow can take place. I have used a CorrelationHandle to group the two ServiceOperations together set to a Guid property on the incoming DataContracts (requests). Is there someway to get the StartWorkflow operation to stop
in this scenario?HI Les G. Kinney,
Welcome to WorkFlow forum.
Workflow tracing offers a way to capture diagnostic information using .NET Framework trace listeners. Tracing can be enabled if a problem is detected with the application and then disabled again once the problem is resolved.
According to your description above, it's recommended to enable
workflow tracing first, it will give some hints why this happens.
Windows Workflow scheduling services manage how workflow instances are scheduled by the workflow runtime engine. This resource is also available. See:
https://msdn.microsoft.com/en-us/library/vstudio/ms735790(v=vs.90).aspx
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Hp mini wa545ua#aba windows 7 blue screen of death and won't load operating system
I tryed to run my computer and the blue screen came up and it wouldn't load micosoft help
-
How to enable diagnostics in cloud services and virtual machine
Hi All, I need to enable diagnostics for cloud services and virtual machine in our cloud environment. I referred the below link. https://convective.wordpress.com/2014/06/27/using-azure-monitoring-services-api-with-azure-cloud-services/ Installed azu
-
Block Customer for Particular Storage Location
Hi. I want to Block a Customer for Particular Storage location. ie plant 1000(St Loc 01,02) plant 2000(St Loc 03,04) Block Customer XYZ for Plant 2000 & Sto Loc 03 is this possible? Reg. Amol
-
My iPhone was running low on battery about 14% so I plug it in and it shuts off, and resets itself. Why would my phone do this and what should I do about it? I lost all my information on my phone.
-
How can a teststand semaphore be relased if it hangs?
I have an application developed in TestStand 3.5 which contains a lot of semaphores activations and releases in TestStand. I use sempahores because I am controlling the testing of four different set-up boxes at the same time. I am doing the tests ste