Windows XP client can't connect to AirPort Extreme AP with WEP enabled.

Hello,
I have big problem with Mac Mini AirPort Extreme working in AP mode with Windows XP client.
Some time ago, AP refuse to connect Windows XP clients (notebook) when WEP is enabled (40/128 bit, same problem), while before that, everything work perfect.
On other hand, iPhone can connect using WEP without an problem.
When WEP is turned off, XP client can connect but this is not acceptable for me.
I must notice that friend of mine have absolute SAME PROBLEM which rise almost at same time few months ago. They have Mac Mini and XP notebook (different then mine) which can not connect with WEP turned on, while his iPod touch work!
I guess that this happened due AirPort Firmware upgrade included in some of Apple software update.
Does anybody have similar problem or know the solution?
My AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 1.4.16.2
Current Wireless Network: Mac mini
Wireless Channel: 11
Tnx in advance.

mikikg, Welcome to the discussion area!
Sorry but this is a known issue.
The only solution is to get a real wireless router instead of using your Mac mini as a base station.

Similar Messages

Windows XP laptop can't connect to Airport Extreme used to extend network.

Have a time capsule for main wireless. PC works fine connecting to it. Have added Airport Extreme to extend network. The mac sees it fine and the PC can connect to it via airport utility but won't connect as wireless and the internet. Running WPA2. Have the latest firmware in each. Any help would be appreciated. Thanks

Thanks for clarifying. If you don't mind, let's double-check your extended-network setup configuration:
o Open AirPort Utility and select the Time Capsule (TC), and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar, and then, click Wireless.
o Verify that both “Create a wireless network” from the Wireless Mode pop-up menu and “Allow this network to be extended” checkbox are selected.
o Next, select the 802.11n AirPort Extreme Base Station (AEBSn), and then, choose Manual Setup from the Base Station menu.
o Verify that “Extend a wireless network” has been selected from the Wireless Mode pop-up menu. Also verify that the correct Network Name is shown for the network you want the AEBSn to extend.
Do your settings match these?

Can't join the airport extreme network with my iphone~~please help

Can't join the airport extreme network with my iphone

What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

Can't connect to Airport over ethernet with XP Home SP3

I can't connect to Airport Base station dual ethernet over ethernet with XP Home SP3. The XP lan connection said Windows could not complete : Renewing your IP address, when i try to repair the connection. the apple Extreme Admin utility shows Base Station Information but can't configure it and said:
The Base station has been reset and is not configured, make sure your computer is configured for a 192.42.249.X-compatible IP address so the base station can be reset to its default configuration. Can any one help with this? I want to set up the airport so I can provide wifi to an IPod but i cant get XP to connect properly it said i have limited or no connectivity.

Its working now but the windows computer still cant get the aiprort base station to start a dialup connection. I dont wnat to usr the ipod for this all the time. Any ideas how to get XP to force the Airport Base Station to open a dial up connection.

Can't connect to airport extreme with my Sony Vaio laptop - don't have airport utility disc, how do I get connected?

My main home computer is an imac and all devices are apple. I do have however a sony Vaio laptop for work and I cannot get it to connect at home to the airport extreme wireless network. Can I get an airport extreme utility disc to install manually?
Roooble

You can download the Apple Airport Utility directly from Apple:
http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
Regards,
Shawn

Windows 7 client can't connect to Server 2008 R2 Print Server VM (ESXi 5.5)

I have an issue today that is driving me bonkers.
I recently came on-board to a company in my area as the system administrator and this network has everything and the kitchen sink wrong with the network layout, probably the worst I've seen and I'm slowly but surely fixing it day by day.....
Well today I decided I was going to spin up another VM from a template and make a Print Server, seems harmless right? --- I thought so too, added all of the printers to the server and did test pages, all was dandy, but then I tried to add the printers to
clients and other server and the real fun has begun, I'm truly perplexed now...
I added a VM to my esxi 5.5 cluster at work that is a 2008 R2 server with only print management on it. I can map all of the printers on the network to the print server as-well as install the drivers correctly and I can resolve the IP and server name via
DNS. I can test printers directly from the print server successfully printing out test pages however whenever I try to map printers you know from the directory in 'devices and printers' from any of the Windows 7 clients or any of the other 2003/2008 servers
I get the classical "Windows cannot connect please check the network connection and make sure sure the printer is turned on". I disabled the windows firewall and I made the point to print GPO set to disabled and still no luck. Again I can print to
all of the printers internally inside of the VM (so I know it communicating to all of the printers), I just can't connect to the printers listed in the directory on any of external desktop/client, it's like so annoying. spent about 6 hours until my brain just
couldn't think anymore, was about to go BS on the VM.
The only thing I can think of, as I was driving home, is that there is a GPO on one of the DC that has a desginated print server policy set. But prior to last week the forest leve was 2000 and now it's 2003. I just don't know Server 2000 enough to know if GPO's
worked in the same way they do in 2003.
Right now printers are connected to other servers in a ad hoc mentality it seems, there has never been a true print server.
Anyone ever have this problem before?
I'm truly puzzled...

Hi Mid.Hudson-IT,
Before we begin ,we should ensure we have configured the printer server correctly .
Here is a link for reference of configuring the printer server .
Print server role: Configuring a print server
https://technet.microsoft.com/en-us/library/cc775791(v=ws.10).aspx
"I can map all of the printers on the network to the print server as-well as install the drivers correctly and I can resolve the IP and server name via DNS"
From this sentence ,I can`t figure out whether you have tried to ping the server both with the IP adress and name adress from the client ?
If we can ping the print server from the client,we can ensure the connection to the printer server is good .
Then we can try to install the printer driver directly to have a check .In the adress bar of Windows Explorer ,input "\\server name \the printer name"
If we cannot ping the print server ,we should troubleshoot the network issue firstly.
We also can check the event viewer for more information to troubleshoot this issue .
Best regards

Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?

I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things around and now have my PS3 and PS4 in my master bedroom but can no longer hook them up via ethernet to the Archer C7. I have run ethernet through the attic into the master bedroom and want to use my Airport Extreme Time Capsule as a way to hook up the consoles via ethernet. If I can use the Airport Extreme to extend my wireless network back to the bedrooms that is even better, although that is an afterthought.
I am not sure what the settings need to be to make this happen. I have searched and tried a number of things but have not found a working solution.
Any help would be greatly appreciated.

Please start over with a default reset on the Time Capsule. This will not affect any of the stored data that you might have on the drive. You can use the same device name and password that you used before if you wish.
Power up the Time Capsule for a few minutes. Then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Make sure that the Ethernet cable connection from the Archer router connects to the WAN "O" port on the Time Capsule
Open up AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule xxxxxx
AirPort Utility will suggest a setup, which you want to ignore
Instead, click the Other Options button
Select the Create a new wireless network setting and click Next
In the Network Name box, enter the exact name of your Archer wireless network
In the Base Station name box, enter a name that you want to use for the Time Capsule device
Uncheck the box to use a single password
In the Network Password box, enter the password for the Archer wireless network
Verify on the next line
In the Base Staion box, enter a password that you want to use as a device password for the Time Capsule
Verify on the next line
Click Next and wait while the AirPort Utility creates a network
Ignore the step about unplugging the modem and click Next
Do not enable the Guest Network option and click Next
Wait while the network is being set up. When you see the message that the wireless network is available, click Done
The Time Capsule will now appear in AirPort Utility with a blinking amber light
Click on the Time Capsule icon, and then click on Edit in the next small box that appears
Click the Network tab at the top of the window
Change the setting for Router Mode from DHCP and NAT to "Off (Bridge Mode)"
Click Update at the lower right and click Continue
Wait a full minute for the Time Capsule to restart and you should have a green light
It would be an excellent idea to power off both the Time Capsule and Archer router now, wait a minute, then start the Archer router and let it run a minute. Then, start the Time Capsule up and give it a minute
You should be all set. The Ethernet ports on the Time Capsule are now operable and the wireless network has been extended using AES encryption.

Win XP SP3 Can't Connect to Airport Extreme

I am trying to connect my MacBook Pro and iMac running Windows XP SP3 to my Airport Extreme and I am not having any luck. The computers connect fine under OS X. Airport set with WPA2 Personal. On Windows I select WPA2 (not WPA2-PSK) and AES. I type in my password when I try to connect. I do not get an error but it is continually looking for the IP Address. I also downloaded the Windows Utility for Airport and can make any changes I want. Therefore, I know I can connect to it.
Any ideas on how to set this up?

Turns out I had the wrong password. Windows does not tell you this, so I had no way of knowing.

Can't connect 2nd airport extreme wirelessly to airport extreme base station

I have an Airport Extreme base station connected to my cable modem. I have a 2nd Extreme I am trying to connect wirelessly to the base station to extend my network. The Airport Utility does not see the second AE. Also the status light on the 2nd AE is flashing amber. I have tried hard resets and the Utility will not find it.

OK, thanks for the information.
I'm not sure if this has anything to do with your issue or not, but according to Apple, a Windows PC cannot be used to configure the newer models of the AirPort Extreme correctly. Here is what the Specifications page for the new AirPort Extreme indicates:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
http://www.apple.com/airport-extreme/specs/
I don't have a PC here to test out the setup.
We can try to configure the 2nd Extreme to extend the 1st, but if that is not successful....and you used the PC to configure the 1st Extreme....it may be necessary to start all over again and reconfigure the 1st Extreme using recommended software before the 2nd Extreme can be set up.
For now, temporarily move the 2nd Extreme to the same room or close proximity to the 1st Extreme. Power up the 2nd Extreme for a few minutes, then hold in the reset button on the device for 8-10 seconds and release. Allow a full minute for the 2nd Extreme to restart to a slow, blinking amber light.
On the home screen for an iPhone or iPad.....
Tap Settings
Tap Wi-Fi
Look for an option to Setup a New AirPort Base Station
Tap on AirPort Exteme just below that option
The utility will open up and take a minute to analyze the network, then suggest that the 2nd Extreme will be configure to extend the 1st Extreme. Enter a device name that you want to use for the 2nd Exteme and tap Next.
The utility will configure everything for you. When you see the message of Setup Complete, click Done.
Now move the 2nd Exteme approximately half way between the 1st Extreme and the area that needs more wireless signal coverage and try things out. Extending this way using wireless will usually result in a loss of about half of the potential network speed, but that is not avoidable with a wireless method.

How many computers can be connected to Airport Extreme?

Hi, we have some kind of medium sized network at home: currently we have about 15-20 devices (Macs, PCs and network printers) that are all connected together by a D-Link DI624+ router. However, for time to time that way too much for the router so we're continously looking forward for a new solution that can handle this amount of devices but still is cheap.
Do you have experience with Airport Extreme as a router for 15 to 20 computers/network devices getting Internet from and being controlled by it? Does it work without problems and is it reliable?
Out current router often crashes, needs restarts and sometimes looses the whole configuration when more computers are active at the same time.
Thanks a lot for you ideas!

Right from Apple's main page for the Airport Extreme.
http://www.apple.com/airportextreme/
"With the new AirPort Extreme Base Station, you and up to 50 of your friends, colleagues, or family members can enjoy a robust wireless network offering up to five times the performance and up to twice the range of networks created with the earlier 802.11g standard.2"

Windows vista won't stay connected to airport extreme.

I have two computers connected to my airport extreme. My mac stays connected without any problems, the pc laptop keeps disconnecting. This problem only happens with the pc/airport extreme connection. The pc will stay connected when a netgear router is being used. Any suggestions (besides replacing the pc with a macbook, which I would love to do)?

Tesserax, the pc is in the same room with the airport router. I haven't tried connecting to it with the ethernet cable. I'll give that a try.
Dumb question...I can access the airport utility on the mac, but not on the pc (cuz I couldn't find it there). Is there a way to find it on the pc? Thanks for providing a path for me. Here are those settings:
Wireless Mode = Create a wireless network
Radio Mode = Automatic
Radio Channel Selection = Automatic
Wireless Security = WPA2 Personal
AirPort > Wireless tab > Wireless Network Options
Use wide channels = checked or unchecked? Checked
Create a closed network = checked or unchecked? Unchecked
Use interference robustness = checked or unchecked? Don't see this on this page
Internet > Internet Connection tab
Connect Using = ? Ethernet
Connection Sharing = ? Share a public IP address
Internet > TCP/IP tab
Configure IPv4 = ? Using DHCP

HP laptop can't connect to AirPort Extreme

My dad has an HP laptop with an 802.11G wifi card. When I enabled AirPort Disk and restarted the router, the laptop came up with a "Limited or no connectivity" error. I tried resetting the network, unplugging the router, and even extending it with an AirPort Express I own. The range without the Express is good, but the laptop can't connect. And I checked the logs and from what I can tell, the issue is on the laptop's end. Any help would be greatly appreciated!
-macfanboy

Check the encryption protocol of your network as well as the Radio mode (n with b/g compatibility). You need to select one of the protocols which is available on your laptop (e.g. WEP). I can't recall exactly, but I don't believe SP1 has WPA. WEP isn't as secure, though.

Can't connect to airport extreme after installing 10.10

After installing OS X 10.10 WiFi connection with Airport Extreme drops out a couple of different ways. Log in fails, Says Airport extreme is not there (2ft away), drops data connection with all WiFi bars showing.
Drops data connection mid data transfer. Then after sever power recycles of the MacBook Pro connection comes back.
Light on Airport Extreme is blinking. This iMac is also connected passing data via the same Airport extreme while the MacBook Pro is having the above experiences.
Anyone experiencing WiFi issues since 10.10?

You can download the Apple Airport Utility directly from Apple:
http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
Regards,
Shawn

Server app can't connect to AirPort Extreme

I just got a Mac Mini, 2010 and did the upgrade to Mountain lion and then included Mountain lion server. Before I going to further I need to preface by saying that server administration is something new for me so be kind please! Long story short every time I try to Set up airport extreme administration from the server app it tells me that my password is incorrect. I know the password is correct because I'm able to login from my iPad and from my MacBook Pro also to verify that the password is correct. In addition to that, I even changed the password and then entered the new password in the server app set up and it still won't connect and it tells me I have the wrong password. To be clear I know that this is the base station password I need not the network password. I'm not sure if I need to reset my airport extreme or if I need to reload the software on the computer if something is wrong somewhere in the software that's preventing this connection from happening does anybody else know from their experience what the problem might be and how I can fix it? Everything I read up to this point has told me how great it is that I have the AirPort Extreme because it makes it easier to configure ports for VPN and filesharing etc. etc. so you can imagine how frustrated I am that it's not working. Any help would be greatly appreciated thanks in advance.

Had the same issue today randomly and found a thread stating that "Apple knew about this and was working on it". I solved it trying all of theses steps each on their own and it did not work BUT did work in this order for me.
-On the server shut down airport utility and server app if you have them open.
-Go to /Library/Server/ move Network folder to trash and empty
-Open the keychain and search for airport, erase all that come up
-Command line steps (so in Terminal)
sudo rm /var/db/.ServerSetupDone
sudo /usr/libexec/PlistBuddy -c "delete :managedIGD" /Library/Server/Network/Config/autoportmap.plist
sudo /usr/libexec/PlistBuddy -c "delete :lastIGD" /Library/Server/Network/Config/autoportmap.plist
(at this point it should say it can't find 'lastIGD")
reboot
-open airport utility and enter password for airport app leave open
-open server app, run through config then enter password for airport
This was basically all of the steps I found on various forums and seems to be either a keychain permissions issue or some funky server app issue.

Vaio Can't Connect to Airport Extreme

I'm not able to connect to my 3-year-old Airport Extreme base station from a newer Sony Vaio laptop with an Intel wireless modem. I administer the base station from a G5 iMac and use 128 bit WEP encryption. Wireless connections from Mac's as well as from a 6 year old Vaio with SMC wireless card work quite well. Not so for the year-old Vaio -- which otherwise works well at unencrypted public access points. I downloaded/installed an updated modem driver from Sony, but that did not cure the problem. Any ideas? Thank you in advance.
Imac G5 Mac OS X (10.3.9) Use Airport Extreme
Imac G5 Mac OS X (10.3.9) Use Airport Extreme

You can download the Apple Airport Utility directly from Apple:
http://support.apple.com/kb/DL1547?viewlocale=en_US&locale=en_US
Regards,
Shawn

Windows XP client can't connect to AirPort Extreme AP with WEP enabled.

Similar Messages

Maybe you are looking for