Windows10 tech preview build 10041 doesn't get updated for some reason

is there a way to force an update? I believe there were a couple of updates , but for some reason my build didn't get updated
tx,
D

Hi,
At least, we have preview build 10049 now, if you want to experience it, then you can change the install speed to "fast" in Settings\Update&Recovery\Windows Update\Advanced Options. If you don't want to experience it, then leave the setting
in "Slow". If you've already set to fast and didn't get any updates, then pleaes check the following registry:
Open regedit.exe
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
Ensure the following values exist:
{value name}, {value type}, {value data}
BranchName, REG_SZ, fbl_impressive
ThresholdOptedin, REG_DWORD, 1
ThresholdRiskLevel, REG_SZ, low
Delete all other values
Open Settings
> Update & recovery > Windows Update
Tap or click Check
for updates
System also has a built-in troubleshooter, launch control panel\All control panel items\Troubleshooting\System and Security\Windows Update, run this troubleshooter.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

When i restart, the top bar with the date and time, networks, battery life etc.. all disappears and theres only the finder icon which gets stuck for some reason and wouldnt work either!

When restarting my macbook pro, all the options on the top right corner of the screen disappear ( battery life, Wifi, languages etc..) when i try to show them in system preferences once i click on network preferences the whole system preferences goes Not responding and i have to force quit it. the only way i found to bring them back is restarting my computer a number of times till they just come back alone. not sure what the problem is??? now i never shut down my computer cause i am worried i'll lose them again and for months i just put to sleep when i am done since nothing happens to them when its on sleep once i shut it down and turn it on again the same thing happens.
appreciate any answers...

You sure you're in the /Users/username/Library/Preferences/ folder? If yes, then that's your issue. That plist controls the right-hand menu bar.
log into a newly created admin user account and see if the problem persists. Then, check its Preference folder for that plist file.

Recently my iPhone 5 cannot get service for some reason is this a simple update fix or will I have to go in the apple shop to get repaired??

About a week ago my iPhone 5 just lost service and simply says no service I turned the phone off back on and no change is this a update fix or will Apple have to repair it ??

First, go through this:
http://support.apple.com/kb/ts4429
If nothing helps, then make an appointment at any Apple store.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Problem with System Metrics SM_CXSIZEFRAME + SM_CXPADDEDBORDER in Windows 10 Preview (Build 10041)

Maybe this forum is the wrong place to ask something about Windows 10 Preview, but I did not find a dedicated place to report
programming problems as opposed to user problems:
I program/maintain a 32-bit desktop (WIN32 API) application and try it now on Windows 10 Preview build 10041. I calculate the size of a window border with the help of the GetSystemMetrics function, using the constants SM_CXSIZEFRAME and SM_CXPADDEDBORDER.
Originally, I only used SM_CXSIZEFRAME. This returned 4 pixels instead of the expected 8 pixels that I got on all previous windows versions up to Windows 8.1. Then I learned that already since Windows Vista one is expected to add the value of SM_CXPADDEDBORDER
to get the full border size. (SM_CXSIZEFRAME alone only continued to work on Vista and beyond thanks to a little compatibility hack by Microsoft, with SM_CXSIZEFRAME still returning the full border size and SM_CXPADDEDBORDER returning
yet 0, at least for 32-bit programs like mine.)
Assuming that Microsoft finally switched off that compatibility measure on Windows 10 I query and add SM_CXPADDEDBORDER now as well. Unfortunately this does not solve my problem, as that system metric returns 0.
Just to be on the sure side, I declared my program to support Windows 10 by using an embedded manifest and using the corresponding <compatibility> / <supportedOS> line with the Windows 10 GUID - this did not help either.
As querying and adding those two system metric values is rather trivial (no need to include code in this question, I think), I don't have the slightest idea what
I could do wrong here, this looks like Preview bug affecting 32-bit programs to me...

I regret to inform you, that you have to live with this error for ever. Microsoft won't fix it... we reported an error of the Windows Error Reporting system (exists since Windows 8) and provided a reproduction (an application with one printed page of code,
so very small and easy). It has never been fixed. 3 developers at Microsoft are involved and they confirmed, that it's a bug ... but... no chance. It's a strange company... I don't know what they mean with "we listen to our customers".
PS: ja, nöd grad hilfriich mini Kommentär, aber die Type triibed eim eifach in Wahnsinn!! ... schinbar nöd nur öschtlich vo Bade, sondern au weschtlich
Rudolf

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

Can a Journal status be changed so it doesn't get selected for posting?

When a new journal is created, can we change the status so it doesn't get selected for posting by teh Auto-Post program. We can't set this in the Auto-Post program as we use the same Category and Source for creating other journals which need to go through the Auto-Post program. Is there a control at the journal level which can stop it from getting posted?

Welcome to the Apple Community.
Whether you are using iTunes Match or not, you can and always have been able to put as little or as much on your devices as you choose.

[svn:osmf:] 10991: Fix bug FM-119, where the playhead time doesn' t get updated until after the seek has completed.

Revision: 10991
Author:   [email protected]
Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
Log Message:
Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed. The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event. This changelist also updates the unit tests and NetMocker to verify the fix.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-119
    http://bugs.adobe.com/jira/browse/FP-1705
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
    osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

Revision: 10991
Author:   [email protected]
Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
Log Message:
Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed. The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event. This changelist also updates the unit tests and NetMocker to verify the fix.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-119
    http://bugs.adobe.com/jira/browse/FP-1705
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
    osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

HT6058 My ipad2 doesn't get updated instead all mails are also blocked! pls hellp

My ipad2 doesn't get updated instead all mails are also blocked! pls hellp

How are you trying to update? Over the air or connected to computer?
Mails blocked? What is happening when you try to get mail?
Are you seeing any error messages? A little more info would be nice.

OVM-Manager 2.2 doesn't gets updated properly.

hi,
i have ovm 2.2 setup consist of 4 servers in cluster.
whenever any of the servers get rebooted.The guest vm gets restarted on the next available resource server.
And now in the OVM-Manager side i see all the guest tht got restarted on the next available resource server shows the status as "UNKNOWN"
OVM-Manager doesn't gets updated properly.
currently in all my vm servers i have ovs-agent version "ovs-agent-2.3-27"
please suggest....

hi Avi,
thks for your reply..
i had upgraded ovs-agent form 2.3-27 to 2.3-31.
i noticted one thing which commom for both ovs-agent version
VIP doesn’t works properly using any of the ovs-agent version (2.3-27 nor 2.3-31)
Whenever VIP is enabled it leads to two major problems.
1)Disturbs the Server Pool HA. It works initially and then start showing unusual behavior .
2)OVM-Manager doesn’t gets updated.
Hence the whole setup is disturbed.
But when only Server Pool HA is enabled & NOT VIP everything works properly .i.e. HA across the Pool & even ovm-manager gets updated time to time.
Seems there is still some bug in the ovs-agent 2.3-31 also especially for VIP.

Trying to install adobe acrobat pro 9 on a new laptop after deactivating it on old laptop. After installation I get Update check for some reason then doesn't let me go any further Anyone know why this is?

OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.

Hi johnb49273320,
What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
Best,
Sara

Hard disc space doesn't get updated

Hi!
I have a Macbook 2Ghz Core Duo. 60 GB HD. well, now I got about 7,5 GB free. I I was planing of cleaning up my HD. Remove pictures, duplicates and not used software.
The problem is that when I trash something, and empty the trash. The HD info lower the free space instead of freeing. I was as low as 100mb so I rebootet my macbook and it shows 15GB free.
What can the problem be? And still after taht reboot, it still got that problem.
(btw. not using firevault)
MacBook Mac OS X (10.4.8) 2 Ghz Intel Core Duo, 1 Gb RAM

The harddive icon on the desktop doesn't seem to be updating at all times for some reason. A finder window in the same volume shows the right free space in the bottom of the window.
Martin

I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do.

I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do. I have ended up chaning my Apple ID 3 times lately and I still can't get to my cloud management. What do I do?

Check if your Data and Time, and Time Zone are set to automatically: OS X Yosemite: Set the date and time on your Mac
Is this issue also appearing on new user account:
Isolating an issue by using another user account - Apple Support
Mac OS X: How to troubleshoot a software issue - Apple Support
Is this issue also appearing in safe mode: OS X: What is Safe Boot, Safe Mode? - Apple Support

So I just upgraded to an iphone 5 from a 4s becaused the screen did not work any longer, however, my 4s still works so I've got everything still but for some reason it will only transfer half my music to itunes so I can't get all my music onto new phone

Hi there
So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes and therefore I can't get it onto my new phone, it only transfers about 50% of it.
Then when i go into music on the iphone 5 it shows the music but won't let you play anything and just flicks through all the songs without playing anything.
Can anyone help please?
Thank you

Thank you - I thought that might be the case BUT why doesn't the music play that I have bought from itunes - do you happen to know please.
All that happens is it just flicks through it all and won't play any of it???
As in I select the song and it just flicks back one screen (if I am making sense).....
I am really stuck and cannot work out what's gone wrong that's all.
Considering a reset of my new iphone and trying again but done that once and it's still the same.

I keep getting updates for my itunes for 11.0.2 but it errors out.

I keep getting updates for my itunes for 11.0.2 but it errors out every time. Can you help.

You don't have to update to iOS 6.0.1. A few iOS 6 users have reported problems, but most have not. However, for my iPad 2 I'm waiting until iOS 6.1 is released. iOS 6 doesn't add that much for the iPad 2, and it subtracts YouTube and Google Maps apps.
 Cheers, Tom

Windows10 tech preview build 10041 doesn't get updated for some reason

Similar Messages

Maybe you are looking for