Wine and Intel HD 3000 with lib32-intel-dri

I have a HP ProBook 4530s with Intel HD 3000 graphics. Wine doesn't find the graphics card. Usually lib32-intel-dri has solved this, however this time it didn't.
fixme:d3d:wined3d_guess_card No card selector available for GL vendor 0x4 and card vendor 0000 (using GL_RENDERER "Gallium 0.4 on llvmpipe (LLVM 0x301)").
I don't recognize the Gallium/llvmpipe part. Is it some new part of the graphics driver architechture that wine can't recognize?

I have this problem too (ati radeon hd 6670 with ati-dri drivers here). On clean wine:
$ WINEPREFIX=$(mktemp -d) wine dxdiag
fixme:storage:create_storagefile Storage share mode not implemented.
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
fixme:storage:create_storagefile Storage share mode not implemented.
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
fixme:iphlpapi:NotifyAddrChange (Handle 0xefe308, overlapped 0xefe320): stub
fixme:storage:create_storagefile Storage share mode not implemented.
fixme:iphlpapi:NotifyAddrChange (Handle 0x101e8e0, overlapped 0x101e8ec): stub
wine: configuration in '/tmp/tmp.moZglmSWXW' has been updated.
fixme:d3d:wined3d_guess_card No card selector available for GL vendor 0x4 and card vendor 0000 (using GL_RENDERER "Gallium 0.4 on llvmpi
pe (LLVM 0x301)").
wine: Unhandled page fault on read access to 0xffffffff at address 0xf2905535 (thread 0009), starting debugger...
Unhandled exception: page fault on read access to 0xffffffff in 32-bit code (0xf2905535).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:f2905535 ESP:0032cb68 EBP:7e1ddd30 EFLAGS:00210202( R- -- I - - - )
EAX:0000001c EBX:00000054 ECX:7e1f2780 EDX:00000000
ESI:00000038 EDI:7e2bc4b4
Stack dump:
0x0032cb68: 7e246f48 7e244020 00000000 f583eff4
0x0032cb78: 7e1f83d0 7e1f83d0 00000003 00000004
0x0032cb88: 00000000 00000000 f75a8420 f583d810
0x0032cb98: 7e1f83d0 00000000 7e1f83d0 f542fc38
0x0032cba8: 7e1f83d0 7e246f48 00000005 f5c23ff4
0x0032cbb8: 7e1f83d0 7e23deb8 7e23de88 f5b8c8af
000c: sel=0067 base=00000000 limit=00000000 16-bit --x
Backtrace:
=>0 0xf2905535 (0x7e1ddd30)
0xf2905535:
Modules:
Module Address Debug info Name (76 modules)
ELF 7b800000-7ba3d000 Deferred kernel32<elf>
\-PE 7b810000-7ba3d000 \ kernel32
ELF 7bc00000-7bcd3000 Deferred ntdll<elf>
\-PE 7bc10000-7bcd3000 \ ntdll
ELF 7bf00000-7bf04000 Deferred <wine-loader>
ELF 7e3f6000-7e3fc000 Deferred libxfixes.so.3
ELF 7e3fc000-7e407000 Deferred libxcursor.so.1
ELF 7e5a2000-7e5cb000 Deferred libexpat.so.1
ELF 7e5cb000-7e600000 Deferred libfontconfig.so.1
ELF 7e600000-7e610000 Deferred libxi.so.6
ELF 7e610000-7e614000 Deferred libxcomposite.so.1
ELF 7e614000-7e61d000 Deferred libxrandr.so.2
ELF 7e61d000-7e627000 Deferred libxrender.so.1
ELF 7e627000-7e62d000 Deferred libxxf86vm.so.1
ELF 7e62d000-7e631000 Deferred libxinerama.so.1
ELF 7e631000-7e655000 Deferred imm32<elf>
\-PE 7e640000-7e655000 \ imm32
ELF 7e655000-7e677000 Deferred libxcb.so.1
ELF 7e677000-7e67d000 Deferred libuuid.so.1
ELF 7e67d000-7e697000 Deferred libice.so.6
ELF 7e67d000-7e697000 Deferred libice.so.6
ELF 7e697000-7e7ce000 Deferred libx11.so.6
ELF 7e7ce000-7e7e0000 Deferred libxext.so.6
ELF 7e7e0000-7e7e9000 Deferred libsm.so.6
ELF 7e7e9000-7e877000 Deferred winex11<elf>
\-PE 7e7f0000-7e877000 \ winex11
ELF 7e877000-7e88e000 Deferred libz.so.1
ELF 7e88e000-7e92a000 Deferred libfreetype.so.6
ELF 7e958000-7ea83000 Deferred oleaut32<elf>
\-PE 7e970000-7ea83000 \ oleaut32
ELF 7ea83000-7eb02000 Deferred rpcrt4<elf>
\-PE 7ea90000-7eb02000 \ rpcrt4
ELF 7eb02000-7eb1c000 Deferred version<elf>
\-PE 7eb10000-7eb1c000 \ version
ELF 7eb1c000-7ebe9000 Deferred gdi32<elf>
\-PE 7eb30000-7ebe9000 \ gdi32
ELF 7ebe9000-7ed3c000 Deferred user32<elf>
\-PE 7ec00000-7ed3c000 \ user32
ELF 7ed3c000-7eda7000 Deferred advapi32<elf>
\-PE 7ed50000-7eda7000 \ advapi32
ELF 7eda7000-7eecf000 Deferred ole32<elf>
\-PE 7edc0000-7eecf000 \ ole32
ELF 7ef7e000-7ef8b000 Deferred libnss_files.so.2
ELF 7ef8b000-7efd2000 Deferred libm.so.6
ELF 7efd5000-7efe5000 Deferred libbz2.so.1.0
ELF 7efe5000-7f000000 Deferred dxdiag<elf>
\-PE 7eff0000-7f000000 \ dxdiag
ELF f4989000-f5b2a000 Deferred swrast_dri.so
ELF f5b2a000-f5b44000 Deferred libgcc_s.so.1
ELF f5c2c000-f6fdf000 Deferred r600_dri.so
ELF f6fdf000-f6fe8000 Deferred librt.so.1
ELF f6fe8000-f6ff5000 Deferred libdrm.so.2
ELF f6ff5000-f700e000 Deferred libxcb-glx.so.0
ELF f700e000-f7011000 Deferred libx11-xcb.so.1
ELF f7011000-f7015000 Deferred libxdamage.so.1
ELF f7015000-f702b000 Deferred libglapi.so.0
ELF f702b000-f7081000 Deferred libgl.so.1
ELF f70af000-f718d000 Deferred opengl32<elf>
\-PE f70d0000-f718d000 \ opengl32
ELF f718d000-f71a1000 Deferred psapi<elf>
\-PE f7190000-f71a1000 \ psapi
ELF f71a1000-f7213000 Deferred ddraw<elf>
\-PE f71b0000-f7213000 \ ddraw
ELF f7213000-f7359000 Deferred wined3d<elf>
\-PE f7220000-f7359000 \ wined3d
ELF f7359000-f7396000 Deferred d3d9<elf>
\-PE f7360000-f7396000 \ d3d9
ELF f7396000-f73bb000 Deferred dxdiagn<elf>
\-PE f73a0000-f73bb000 \ dxdiagn
ELF f73d3000-f73d8000 Deferred libdl.so.2
ELF f73d9000-f73e0000 Deferred libxdmcp.so.6
ELF f7402000-f7406000 Deferred libxau.so.6
ELF f7406000-f75ac000 Deferred libc.so.6
ELF f75ac000-f75c7000 Deferred libpthread.so.0
ELF f75c7000-f770a000 Dwarf libwine.so.1
ELF f770b000-f772d000 Deferred ld-linux.so.2
ELF f772d000-f772e000 Deferred [vdso].so
Threads:
process tid prio (all id:s are in hex)
00000008 (D) C:\windows\system32\dxdiag.exe
00000009 0 <==
0000000c services.exe
00000045 0
00000030 0
0000000e 0
0000000d 0
00000012 explorer.exe
00000013 0
0000002d winedevice.exe
00000034 0
00000033 0
0000002f 0
0000002e 0
I tried wine-git from aur, fails with same error. I can't get trace with gdb, but running wine with
WINEDEBUG=+all wine dxdiag
gives something similar. Log is quite big (62Mb) and from different executable, but i think all revelant info is here:
19.337:0009:trace:module:load_dll Found L"C:\\windows\\system32\\ddraw.dll" for L"DDRAW.DLL" at 0x7dfb0000, count=3
19.337:0009:trace:heap:RtlFreeHeap (0x110000,70000062,0x1c2ad0): returning TRUE
19.337:0009:Ret KERNEL32.LoadLibraryA() retval=7dfb0000 ret=10001b82
19.337:0009:Call KERNEL32.GetProcAddress(7dfb0000,1000e1bc "DirectDrawCreate") ret=10001bb1
19.337:0009:Ret KERNEL32.GetProcAddress() retval=7dfb1b0c ret=10001bb1
19.337:0009:Call ddraw.DirectDrawCreate(00000000,0033f240,00000000) ret=10001be6
19.337:0009:trace:ddraw:DirectDrawCreate driver_guid (null), ddraw 0x33f240, outer_unknown (nil).
(lots of text)
20.396:0009:Ret ddraw.DirectDrawCreate() retval=00000000 ret=10001be6
20.396:0009:trace:ddraw:ddraw1_QueryInterface iface 0x1980cc, riid {b3a6f3e0-2b43-11cf-a2de-00aa00b93356}, object 0x33f248.
20.396:0009:trace:ddraw:ddraw7_QueryInterface iface 0x1980c0, riid {b3a6f3e0-2b43-11cf-a2de-00aa00b93356}, object 0x33f248.
20.396:0009:Call wined3d.wined3d_mutex_lock() ret=7dfbb2cc
20.396:0009:Ret wined3d.wined3d_mutex_lock() retval=00000000 ret=7dfbb2cc
20.396:0009:trace:ddraw:ddraw7_QueryInterface (0x1980c0) Returning IDirectDraw2 interface at 0x1980c8
20.396:0009:trace:ddraw:ddraw2_AddRef 0x1980c0 increasing refcount to 1.
20.396:0009:Call wined3d.wined3d_mutex_unlock() ret=7dfbb31a
20.396:0009:Ret wined3d.wined3d_mutex_unlock() retval=00000000 ret=7dfbb31a
20.396:0009:trace:ddraw:ddraw2_Release 0x1980c0 decreasing refcount to 0.
20.396:0009:trace:ddraw:ddraw1_SetCooperativeLevel iface 0x1980cc, window (nil), flags 0x8.
20.396:0009:trace:ddraw:ddraw7_SetCooperativeLevel iface 0x1980c0, window (nil), flags 0x8.
20.396:0009:trace:ddraw:DDRAW_dump_cooperativelevel - DDSCL_NORMAL
20.396:0009:Call wined3d.wined3d_mutex_lock() ret=7dfbd7b7
20.396:0009:Ret wined3d.wined3d_mutex_lock() retval=00000000 ret=7dfbd7b7
20.396:0009:Call wined3d.wined3d_get_adapter_display_mode(001ba280,00000000,0033f1b4) ret=7dfbd987
20.396:0009:trace:d3d:wined3d_get_adapter_display_mode wined3d 0x1ba280, adapter_idx 0, display_mode 0x33f1b4, rotation 0x18c.
20.396:0009:Call user32.EnumDisplaySettingsExW(001baaf4 L"\\\\.\\DISPLAY1",ffffffff,0033efd4,00000000) ret=7de1eaaa
20.396:0009:trace:x11settings:X11DRV_EnumDisplaySettingsEx mode -1 (current) -- getting current mode (desktop)
20.396:0009:trace:x11settings:X11DRV_EnumDisplaySettingsEx mode 0 -- 800x600x32bpp @60 Hz (desktop)
20.396:0009:Ret user32.EnumDisplaySettingsExW() retval=00000001 ret=7de1eaaa
20.396:0009:trace:seh:raise_exception code=c0000005 flags=0 addr=0x7de1eb46 ip=7de1eb46 tid=0009
20.396:0009:trace:seh:raise_exception info[0]=00000001
20.396:0009:trace:seh:raise_exception info[1]=0000018c
20.396:0009:trace:seh:raise_exception eax=0000018c ebx=7deefff4 ecx=00000000 edx=0033f1b4 esi=001ba290 edi=0033f0b0
20.396:0009:trace:seh:raise_exception ebp=0033f0c8 esp=0033ef90 cs=0023 ds=002b es=002b fs=0063 gs=006b flags=00210297
20.396:0009:trace:seh:call_stack_handlers calling handler at 0x403988 code=c0000005 flags=0
20.396:0009:Call KERNEL32.UnhandledExceptionFilter(0033eb24) ret=00402baa
0009: create_event( access=001f0003, attributes=00000002, manual_reset=1, initial_state=0, objattr={rootdir=0000,sd={},name=L""} )
0009: create_event() = 0 { handle=0058 }
wine: Unhandled page fault on write access to 0x0000018c at address 0x7de1eb46 (thread 0009), starting debugger...
For me native apps works too (glxgears and glxgears32 from mesa-demos and lib32-mesa-demos). I don't have any 64-bit windows apps to test. Here is similar bug report (closed): https://bugs.archlinux.org/task/27645.
edit: typo
Last edited by hiciu (2012-07-11 07:15:25)

Similar Messages

  • [SOLVED] cant upgrade because "mesa-dri and intel-dri are in conflict"

    When I type
    Pacman -Syu
    I get
    Replace intel-dri with extra/mesa-dri? [Y/n]
    I answer n
    mesa-dri and intel-dri are in conflict. Remove intel-dri? [y/N]
    I answer N
    then I get
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: mesa-dri and intel-dri are in conflict
    I dont want to replace intel-dri with mesa so What do I do?
    If I type
    pacman -Qs -- -dri
    The print out is
    local/intel-dri 10.2.8-1
    Mesa drivers for Intel
    local/libva-intel-driver 1.3.2-1
    VA-API implementation for Intel G45 and HD Graphics family
    local/menumaker 0.99.7-9
    Heuristics-driven menu generator for Deskmenu, FluxBox, IceWM, OpenBox, WindowMaker and XFCE
    local/xf86-input-evdev 2.9.0-2 (xorg-drivers xorg)
    X.org evdev input driver
    local/xf86-input-keyboard 1.8.0-3 (xorg-drivers xorg)
    X.Org keyboard input driver
    local/xf86-input-mouse 1.9.1-1 (xorg-drivers xorg)
    X.org mouse input driver
    local/xf86-input-synaptics 1.8.1-1 (xorg-drivers xorg)
    Synaptics driver for notebook touchpads
    local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers
    so it looks like I already have mesa dirvers installed - so maybe I should go ahead and answer YES as I am worrying over nothing?
    Last edited by chickenPie4tea (2014-10-04 11:25:59)

    Lone_Wolf wrote:
    mesa-dri is a new package that replaces ati-dri, intel-dri, nouveau-dri & svga-dri.
    Check the "latest news" on archlinux home page .
    I have the same issue but using the catalyst-total-hd234k package from AUR. Should I say yes to remove also this package?
    I'm waiting for an answer from the maintainer of the catalyst package.

  • Safari 3 for Win and Mac not working with sites

    I work for a company that does all the IT stuff for the county of San Diego, and it was brought to our attention that the County site (and some of the sites in it) don't play nice with Safari 3 on either platform. I downloaded the latest beta, plugged in http://www.sdcounty.ca.gov , and get a bunch of boxes at the top of the window.
    The sites work fine in IE 5-7, Safari 2 and up, and Firefox. Someone on the ARStechnica forums mentioned they saw our servers (IIS and Unix/Apache) are set for uft-32. Okay, so does anyone know what we should have them set at so people (and our client) stop complaining we don't work with Safari Beta?
    Thanks for any feedback/help.
    Greg

    Thanks Tom,
    I'll look into it. We're going to change the test server to utf-8, but can't until the one guy who has admin access to the box gets back from training in about a week. Yes, they could have given admin or sudo access to a few of us, but that would have made too much sense.

  • Bluetooth shuttted down after I updated to Mavericks, please help me !  I am 70 Years old and worked very happy with my iMac (21,5" mid 2010, 3,2 GHz Intel Core 3) until I updated him from  SnowLeopard 10.6.8 to Mavericks 10.9.2. 2 Days all was OK. Next M

    Bluetooth shuttted down after I updated to Mavericks, please help me !
    I am 70 Years old and worked very happy with my iMac (21,5“ mid 2010, 3,2 GHz Intel Core 3)
    until I updated him from  SnowLeopard 10.6.8 to Mavericks 10.9.2.
    2 Days all was OK. Next Morning-Start he needs (until now) 3 minutes to show me a SCREEN only milky white. After that he starts like ever with all ICONS in about 1 minute. (together 4 min.)
    ..But I must notice, that I cannot make anything, because the „BLUETOOTH APPLE WIRELESS KEYBOARD  and the APPLE  MAGIC MOUSE“ doesn't work anything like before.
    I could nothing do, I must drop my APPLE only out.
    That I maked ever 10x and all was the same... (Maveriks also 4x new updated)
    I taked my Logitech-Bluetooth-Mouse from the WIN-Laptop, dropped it in USB from iMAC...and in one second I could work only with this MOUSE...I buyd the Logitech COMBO K520 and all was OK now with my lovely APPLE iMAC to work with him...But without APPLE KEYBOARD and MAGIC MOUSE...and with a 4 min. -START until now.
    I  asked the EXPERTS from APPLE-SUPPORT under Tel. 0800-6645451 in Germany, became a Number, maked many Things by starting new, but the mistake after all is the same like before.
    When I look into ...Apple/ Info/System/ Hardware/ Bluetooth   ..my APPLE says: NO INFOs FOUND (Es wurden keine Informationen gefunden.)
    Under Hardware/ Diagnose : Selbsttest beim Einschalten: zuletzt ausgeführt: 15.05. 14, Ergebnis: Bestanden (that means OK) !!
    I asked many Peaple, who sold APPLE-Computers in the STORS, but they all had no IDEA, how they can help.
    I think, it could be a DRIVER when Starting the BIOS, JAVA RUNTIME a.s.o...
    Is an Expert under YOU to help me by my Problem with this iMAC ?

    dietmarfromdeu,
    if you start up your iMac in Safe mode, do you still have Bluetooth problems with your Apple wireless keyboard and Magic Mouse?

  • Performance decrease with xorg 1.6 and intel

    i have a box with
    gigabyte ga-8ig1000mk mainboard
    intel 865G graphics
    celeron 2.6 cpu
    512 M ram
    arch linux
    x does not start with xorg 1.5/intel or xorg 1.6/intel (video memory related error message)
    kde 4 performance with xorg 1.6/intel-legacy is noticably lower than with xorg 1.4/intel
    glxgears in its default window size gives 460 fps with xorg 1.4/intel and 300 fps with xorg 1.6/intel-legacy
    currently the only way to have xorg 1.4 is
    IgnorePkg = xf86-video-intel
    IgnorePkg = intel-dri
    IgnorePkg = glproto
    IgnorePkg = xcb-proto
    IgnorePkg = libxcb
    IgnorePkg = libx11
    IgnorePkg = dri2proto
    IgnorePkg = libdrm
    IgnorePkg = mesa
    IgnorePkg = libgl
    IgnorePkg = libxdamage
    IgnorePkg = damageproto
    IgnorePkg = xcb-util
    IgnorePkg = gtk2
    IgnorePkg = pango
    IgnorePkg = libthai
    IgnorePkg = libxinerama
    IgnorePkg = libxcursor
    IgnorePkg = libxklavier
    IgnorePkg = xkeyboard-config
    IgnorePkg = libxi
    IgnorePkg = libxext
    IgnorePkg = libx11
    IgnorePkg = libxcb
    IgnorePkg = xcb-proto
    IgnorePkg = xextproto
    IgnorePkg = inputproto
    IgnorePkg = cairo
    IgnorePkg = libpng
    IgnorePkg = pixman
    IgnorePkg = xf86-input-keyboard
    IgnorePkg = xf86-input-mouse
    IgnorePkg = xf86-video-vesa
    IgnorePkg = libfontenc
    IgnorePkg = freetype2
    IgnorePkg = fontsproto
    IgnorePkg = libxfont
    IgnorePkg = xproto
    IgnorePkg = xorg-font-utils
    IgnorePkg = xorg-fonts-encodings
    IgnorePkg = xorg-fonts-alias
    IgnorePkg = expat
    IgnorePkg = fontconfig
    IgnorePkg = xorg-fonts-100dpi
    IgnorePkg = xorg-fonts-75dpi
    IgnorePkg = libxau
    IgnorePkg = libxdmcp
    IgnorePkg = xcb-proto
    IgnorePkg = libxcb
    IgnorePkg = kbproto
    IgnorePkg = inputproto
    IgnorePkg = bigreqsproto
    IgnorePkg = libx11
    IgnorePkg = xextproto
    IgnorePkg = libxext
    IgnorePkg = libice
    IgnorePkg = libsm
    IgnorePkg = libxt
    IgnorePkg = libxmu
    IgnorePkg = libxpm
    IgnorePkg = printproto
    IgnorePkg = libxp
    IgnorePkg = libxaw
    IgnorePkg = xorg-res-utils
    IgnorePkg = libxkbfile
    IgnorePkg = libxkbui
    IgnorePkg = xf86miscproto
    IgnorePkg = libxxf86misc
    IgnorePkg = xf86vidmodeproto
    IgnorePkg = libxxf86vm
    IgnorePkg = xcursor-themes
    IgnorePkg = xorg-xkb-utils
    IgnorePkg = xkeyboard-config
    IgnorePkg = fontcacheproto
    IgnorePkg = libxfontcache
    IgnorePkg = libxi
    IgnorePkg = liblbxutil
    IgnorePkg = renderproto
    IgnorePkg = libxrender
    IgnorePkg = randrproto
    IgnorePkg = libxrandr
    IgnorePkg = trapproto
    IgnorePkg = libxtrap
    IgnorePkg = mcpp
    IgnorePkg = xtrans
    IgnorePkg = xorg-server-utils
    IgnorePkg = xf86dgaproto
    IgnorePkg = libxxf86dga
    IgnorePkg = recordproto
    IgnorePkg = libxtst
    IgnorePkg = xineramaproto
    IgnorePkg = libxinerama
    IgnorePkg = videoproto
    IgnorePkg = libxv
    IgnorePkg = dmxproto
    IgnorePkg = libdmx
    IgnorePkg = libxft
    IgnorePkg = xorg-utils
    IgnorePkg = libdrm
    IgnorePkg = xorg-fonts-misc
    IgnorePkg = pixman
    IgnorePkg = xbitmaps
    IgnorePkg = xorg-server
    IgnorePkg = xorg-twm
    IgnorePkg = xorg-xauth
    IgnorePkg = xorg-xinit
    IgnorePkg = fixesproto
    IgnorePkg = libxfixes
    IgnorePkg = libxcursor
    IgnorePkg = libpng
    IgnorePkg = xorg-apps
    IgnorePkg = xterm
    i want a better solution
    Last edited by ash (2009-04-19 22:48:49)

    you do not need nearly as many packages on hold. Haven't logged into my 32-bit arch install for a month now, but I've maintained a xorg 1.4 install with this line just fine:
    IgnorePkg = xf86-video-intel xf86-input-evdev xorg-server xorg-apps xorg-xkb-utils xorg-server-utils xorg-utils intel-dri synaptics libgl libdrm xorg-res-utils xf86driproto xf86-input-keyboard xkeyboard-config
    That said, I expext to upgrade next time I use it (probably to play around with some fast boot). I would look into troubleshooting with the latest xorg and intel driver as it really should work, if I were you. I presume you have already tried starting x without a xorg.conf as a baseline test with those versions?

  • I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

      I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

    So did you ever get your apps back on your iPhone?

  • HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

    I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

  • Can you replace a powermac g5 mbd with and Intel mbd?

    Can you replace a powermac g5 mbd with and Intel mbd?

    I think you would have to do a lot of work in addition to just replacing the motherboard. Like getting a new power supply for instance as the cables won't match what Apple specs for their designed and built hardware. I think the best you can hope for is to reuse the Aluminum tower case, and that's about it.
    Some links related to this:
    http://hintsforums.macworld.com/archive/index.php/t-96460.html
    http://forums.macrumors.com/showthread.php?t=652438

  • Odd shadowing effects in XFCE with dual monitors and intel graphics

    Linux fowie-desktop 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686 Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz GenuineIntel GNU/Linux
    lspci shows:
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    not using an xorg.conf
    rc.conf (snippets)
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="UTC"
    TIMEZONE="America/Denver"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!usblp vboxdrv !saa7134 saa7134-dvb)
    DAEMONS=(syslog-ng dbus hal @network @netfs @crond @alsa @cups @sensors @samba @ddclient @sshd @httpd @mysqld @smartd)
    and my .xinitrc:
    /usr/bin/xrandr --output VGA1 --left-of DVI1 --output DVI1 --mode 1920x1080
    exec ck-launch-session startxfce4
    Xorg.0.log at http://pastebin.ca/1925313
    If I use the xf86-video-intel driver from extra, the xrandr command to do dual-outputs fails and I get both monitors showing the same desktop (mirrored mode).  I switched to use AUR's xf86-video-intel-git (reading the forums it said this would fix the dual-monitor issue until extra moves to 2.12.0-2) and I do get the dual monitors working propery with the xrandr command, but I'm experiencing wierd effects.  For every unminimized window on the desktop, if I put another window in front, the shadow of the window below stays on top of the window containing the focus.  Hard to explain, so I'll use a photo:
    That's what it looks like with xf89-video-intel-git, libdrm-git, dri-git, and anything else git and intel graphics related I can find.  Any ideas what's wrong, or what I would even call this problem so I can look around and see if anyone else is having the same issues?
    Last edited by fowie (2010-08-25 20:21:53)

    Ok, I went into the XFCE4 setting manager and opened the "Window Manager Tweaks" module, Under "Compositor" if I disable display compositing the shadowing effect is gone, making the display much more usable (thanks!).  But now compositing does not work.  Guess I'll go report this to XFCE, or is the XFCE compositing manager handled by someone else?
    Last edited by fowie (2010-08-25 23:11:54)

  • Can I replace the G5 CP units in my pre intel power mac? I get the 3 flash light and am heating them with a hair dryer. It works but needs fixing and I can't afford a new mac

    Can I replace the G5 CP units in my pre intel power mac? I get the 3 flash light and am heating them with a hair dryer. It works but needs fixing and I can't afford a new mac

    OK, it looks like all but the first G5 1.6 Ghz, & the last 3 G5 Dual Cores will take PC3200 RAM...
    Power Macintosh G5 1.8 (PCI-X) PowerMac7,2   1 Power Macintosh G5 2.0 DP (PCI-X) PowerMac7,2   1 Power Macintosh G5 1.8 DP (PCI-X) PowerMac7,2   1 Power Macintosh G5 1.8 DP (PCI) PowerMac7,3   1 Power Macintosh G5 2.0 DP (PCI-X 2) PowerMac7,3   1 Power Macintosh G5 2.5 DP (PCI-X) PowerMac7,3   1 Power Macintosh G5 1.8 (PCI) PowerMac9,1   1 Power Macintosh G5 2.0 DP (PCI) PowerMac7,3   1 Power Macintosh G5 2.3 DP (PCI-X) PowerMac7,3   1 Power Macintosh G5 2.7 DP (PCI-X) PowerMac7,3

  • VT with Satellite P300 and Intel Core 2 Duo T5750

    Hello there,
    i recently bought a new Satellite P300 Notebook to be able to work with virtualisation technics. Unfortuanately, there is no "VT"-mark in the bios. Is there any possibility to activate the "VT"-Technology? I know that there are many posts about this topic, but they aren't very helpfull, because i already looked up my processor and intel says that it is "VT" capable...
    Thanks a lot for your answers :-)

    I started working as a Computer Technician about 4 weeks ago and this notebook was the cheapest way to try different systems (because it's quick enough!). The company i work for has many different clients who have very many different systems (also 64bit systems) so i wanted to use virtual machines to evaluate different problems... And without VT enabled a can't evaluate a 64bit virtual machine... So, if you are right (what i do think) then i've got a good notebook which is only good for "normal" business or homeuse... But thank you very much for your answer!

  • HT3819 I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

    I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

    I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?

  • WRT110 crashes with Vista SP1 and Intel 3945

    I have a WRT110 with the latest firmware 1.0.4, an a Dell XPS1330 with the Intel 3945abg wireless card and the latest drivers in Intel. When ever my laptop tries to connect the router crashes and drops all other connections with other wireless devies and wired devices. I also have another laptop running XP that works great on the wireless connection. It's same to say the problem is limited to the Vista machine and the Intel 3945 wireless card. Now sure what to do?

    I have the same problem. Took me a while to figure out that when i connected my Toshiba laptop with Vista and Intel 3945 Router and network crashed couldnot even get the router accessed on hardwired computer. Everything returns back to normal when laptop disconnected from wireless network
    Customer support was not able to help, called them twice. I solved by connecting an old wireless router to one of the ports of Linksys and connect my Vista laptop on that wireless network. That is not really a solution but if you'd like to, return the router until they can at least admit that there is a problem with compatibility, upgrading firmware on wireless adaptor did not help.
    (Mod note: Edited for guideline compliance.) 
    Message Edited by kent07 on 11-06-2008 06:33 PM

  • OS X 10.4.x on PPC and Intel having problems with Card Readers

    Hello,
    I am in charge of a school district running about 75 client macs, all PPC G5 and Intel mixed. I have been having reports that the Lexar card readers for the digital photography lab sometimes do not auto-mount the media that is inserted into them. Apple System Profiler detects the card reader, but when the card is stuck into the reader it does not appear in finder at all to retrieve the files.
    Upon testing, a reboot usually alleviates the problem, but the teachers feel that the interuption in class and productivity time for a reboot is unacceptable.
    I have the user accounts managed through Workgroup Manager on my Xserve, and I have it set so that they have access to auto-mount media (unless I'm missing a setting somewhere. But i'd think if the setting was off, the reboot wouldn't matter and it wouldn't fix the issue).
    At anyrate, my question is has anyone else expierenced problems with card readers and auto-mounting the media in OS X? How about in a multi-user environment. Does anyone have any suggestions? All are welcome.
    Thanks so much for your time.

    Since the latest update Mac OS X 10.4.9, my USB card readers have stopped working. The media is recocognized, but the transfer rate is so slow I could manually write the binary.
    There were no issues prior to this update, and card readers work on machines NOT updated.

  • Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics

    With my windows 8.1
    If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
    the windows can't open unless I uninstalled one of them
    but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
    and the most of games Intel can run it but AMD can
    Help !!
    Now I'm installing The two cards but if i restarted my laptop it wouldn't run
    The photo show that ...
    http://www3.0zz0.com/2015/04/07/21/289209638.png

    Hi there @ZezoOo 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
    Please see the following, for some guidance.  HP Products - What If I Don't See My Operating System?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for

  • SQL 2005 x64 exception

    Recently We've migrated SQL 2005 x86 Enterprise running on Windows 2003 Enterprise to new hardware where is running Windows 2008 SP2 and SQL 2005 x64 SP4 with CU3. We migrate users (with standard approach by Microsoft) and application databases to ne

  • 500 Internal Server Error, JBO-30003: The application pool

    I am using Jdeveloper to develop ADF BC application. I am getting the following error message when I run the application: JBO-30003: The application pool (oracle.srtutorial.datamodel.entities.SRPublicServiceLocal) failed to checkout an application mo

  • My facetime gets connected but not able to move from connecting screen to the video chat mode.

    Hi.. I am abel to make a call from my facetime, and if the opposite person accepts the call, it says connecting and it stay that way for a min and then says call failed, i am able to make facetime calls with my ipad to any other device other than min

  • How do i play poker on unibet

    how do i play poker on unibet? how can I read an excel file in my é-mail

  • Is there any way how to generate JPG image from DNG easily?

    I use PS, FW and Bridge. I have often a problem to show images for preview from DNG files. Please can you explain me, how to do it as a batch easily? Generate preview images from a whole folder? Do you generate JPG in original size or do you archive