Wine and unhandled page fault

Hello,
I've just installed wine from extra and when I try to run winecfg I get :
wine: creating configuration directory '/home/esox/.wine'...
wine: Unhandled page fault on read access to 0x00340023 at address 0x7efa5bb3 (thread 0009), starting debugger...
wine: Unhandled page fault on read access to 0x00000000 at address 0x7efa68bc (thread 000b), starting debugger...
wine: Unhandled page fault on read access to 0x00000000 at address 0x7efa68bc (thread 000d), starting debugger...
err:ntdll:RtlpWaitForCriticalSection section 0x7eb24160 "x11drv_main.c: X11DRV_CritSection" wait timed out in thread 0009, blocked by 0000, retrying (60 sec)
I tried to get it from aur and make the package but I get the same problem.
Does anybody have a solution?
Thanks a lot
Esox_ch

I don't have a solution, but I have the same problem.
To start at the beginning of the story, I've had the wine-based port of google's picasa 2 on my laptop for a while, and it worked well, and then as of recently, it takes like 2 minutes of doing nothing to start up. Picasa includes its own wine binaries, so I installed wine from Arch's repo, trying stuff to see if it would help, and winecfg gave me the same problem.
Anyway, I didn't care enough to figure it out. However, I think that perhaps a kernel update broke wine or something.

Similar Messages

Wine: Unhandled page fault

I've had this error with a few apps in the past and have just come across it again when trying to run safari.
wine: Unhandled page fault on read access to 0x00000008 at address 0x99bada (thread 0009), starting debugger...
Unhandled exception: page fault on read access to 0x00000008 in 32-bit code (0x0099bada).
I have tried adding noexec=off noexec32=off to my kernel line and compiling wine with different suggested settings from other forums but I've had no luck.
It's not overly important to myself, certainly nothing that would make me wanna switch from Arch64. But if anyone knows how to fix it please let me know (besides using a chroot).

I don't have a solution, but I have the same problem.
To start at the beginning of the story, I've had the wine-based port of google's picasa 2 on my laptop for a while, and it worked well, and then as of recently, it takes like 2 minutes of doing nothing to start up. Picasa includes its own wine binaries, so I installed wine from Arch's repo, trying stuff to see if it would help, and winecfg gave me the same problem.
Anyway, I didn't care enough to figure it out. However, I think that perhaps a kernel update broke wine or something.

Numerous Unhandled page faults

While running a couple different games, including The Sims 3 and Pharaoh/Cleopatra, I've gotten errors about unhandled page faults on read and write accesses to varying addresses. The games crash and report error messages with the address of the page fault and some other info. I had never seen these errors before updating to Yosemite shortly after its release, but now see them often.
For other reasons, I replaced my previous hard drive with an SSD and did a clean OS install, copying over only some document folders onto the new drive, but still experience these errors.
Has anybody seen a solution to this?
Specs:
MacBook Pro (13-inch, Mid 2009) running Mac OS X 10.10.1 Yosemite
8 GB 1067 MHz DDR3 Memory
2.26 GHz Intel Core 2 Duo Processor
NVIDIA GeForce 9400M 256 MB Video Card

Check wine's appdb. It looks like System Shock 2 refuses to run due to Safe disk copy protection. Find a crack over the net and before complaing about game not working under wine, ask google: "wine appdb game name"
Find information about the second game yourself

How to fix: Unhandled page fault on read access to 0x00000000 at address 0x00aa4088 .

hi
i recently downloaded a game (assassins creed I), i opened it and the intro showed up after that the screen went white, then black and a window came up calld exception raised and then below it, it said, Unhandled page fault on read access to 0x00000000 at address 0x00aa4088.
i have tried opening it many times and the same results come up.
i've looked everywere and found that other people have had this same problem but no one has fixed it yet
any help will be appreciated
thanks

I did try the OP's solution, but it proved to be only temporary. Take a gander at my proposition, and if you are experiencing many issues with your MBA and WiFi Connection, try doing all of the possible fixes located on these forums to see which one (hopefully) works for you. Here's my attempt at a solution.
Well, after toying around with many of the settings on the MBA, I then began to work on the AirPort Extreme (Gigabit Version) and I discovered that the MBA would only connect when I selected "Interference Robustness" when configuring the MBA. This made a difference no matter what "Wireless Mode" the AE was in, be it 802.11n(b/g) Support, plain 802.11n(5Ghz), ect. So, try that out if you have an AirPort Extreme/Express and MBA, and post your results. The MBA is running 10.5.5 with only one update remaining (10.5.6).
{This has posted in various threads by me, myself, and I, and I am only reposting so that many threads are aware of this. Hope it helps at least one person.}

Wine page fault error on running Sims

Hi All,
I am suffering excruciating It installs fine, wine .wine/drive_c/Program\ wine: Unhandled Unhandled exception: Register dump: CS:0073 SS:007b EIP:00409885 ESP:0033fd34 EAX:0033fd3c EBX:00000001 ESI:7ee189c0 EDI:00400000 Stack dump: 0x0033fd34: 00000067 0x0033fd44: 00000067 0x0033fd54: 0033fd74 0x0033fd64: 7ef94bdb 0x0033fd74: 00000005 0x0033fd84: 76726553 Backtrace: =>0 0x00409885 1 0x00416992 in 2 0x7ee0f7c4 start_process+0x54() 3 0x7efbb254 call_thread_func+0xc() 4 0x7efbb460 call_threa 5 0x7ef97d6a in 0x00409885: movl Modules: Module Address PE 400000- 444000 PE 10000000-1000c000 ELF 7bf00000-7bf03000 ELF 7e508000-7e574000 \-PE 7e510000-7e574000 ELF 7e588000-7e591000 ELF 7e591000-7e596000 ELF 7e596000-7e599000 ELF 7e599000-7e5a0000 ELF 7e5a0000-7e5a9000 ELF 7e5a9000-7e5ae000 ELF 7e5ae000-7e5ce000 \-PE 7e5b0000-7e5ce000 ELF 7e5ce000-7e5e7000 ELF 7e5e7000-7e5fe000 ELF 7e5fe000-7e718000 ELF 7e718000-7e720000 ELF 7e743000-7e7de000 \-PE 7e750000-7e7de000 ELF 7e880000-7e8a6000 ELF 7e8a6000-7e8d1000 ELF 7e8d1000-7e8e5000 ELF 7e8e5000-7e969000 ELF 7e969000-7e96e000 ELF 7e96e000-7e97c000 ELF 7e98c000-7e99f000 PE 7e990000-7e99f000 ELF 7e99f000-7e9b2000 \-PE 7e9a0000-7e9b2000 ELF 7e9b2000-7ea08000 \-PE 7e9c0000-7ea08000 ELF 7ea08000-7eaa6000 \-PE 7ea20000-7eaa6000 ELF 7eaa6000-7ebeb000 \-PE 7eac0000-7ebeb000 ELF 7ed9c000-7ef08000 \-PE 7edb0000-7ef08000 ELF 7ef08000-7ef2e000 ELF 7ef2f000-7ef32000 ELF 7ef32000-7ef35000 ELF 7ef35000-7ef39000 ELF 7ef39000-7ef51000 \-PE 7ef40000-7ef51000 ELF 7ef51000-7f000000 \-PE 7ef60000-7f000000 ELF b74a8000-b74ac000 ELF b74ac000-b75f2000 ELF b75f2000-b760b000 ELF b7622000-b762e000 ELF b762e000-b7769000 ELF b776a000-b7788000 Threads: process tid 00000008 (D) Z:\home\bmen 00000009 0 <== 0000000e 0000001e 0 0000001d 0 00000015 0 00000014 0 00000010 0 0000000f 0
00000011
00000016 0
00000013 0
00000012 0
00000017
00000018 0
0000001a
0000001f 0
0000001c 0
0000001b 0
Backtrace:
=>0 0x00409885 1 0x00416992 in 2 0x7ee0f7c4 start_process+0x54() 3 0x7efbb254 call_thread_func+0xc() 4 0x7efbb460 call_threa 5 0x7ef97d6a in Anyone know how to progress this?
Thanks,
Bernie pressure from my teenage daughter who wants to run Sims on my Arch Laptop.
but running it gives the following page fault:
Files/Maxis/The\ Sims/Sims.exe
page fault on write access to 0x00000088 at address 0x409885 (thread 0009), starting debugger...
page fault on write access to 0x00000088 in 32-bit code (0x00409885).

DS:007b ES:007b FS:0033 GS:003b
EBP:0033fe1c EFLAGS:00210216( R- -- I -A-P- )
ECX:00000067 EDX:00400000

0040e5bd 00000000 00400000
00416840 00130d06 7ee4b7e8
7ef83a2f 0010f248 00419aa1
7efe4448 005605b0 00000094
00000001 00000a28 00000002
20656369 6b636150 00003320

in sims (+0x9885) (0x0033fe1c)
sims (+0x16992) (0x0033fea8)
in kernel32 (0x0033fee8)
in ntdll (0x0033fef8)
d_entry_point+0x70() in ntdll (0x0033ffc8)
ntdll (+0x37d6a) (0x0033ffe8)
%esp,0x21(%ecx)

Debug info Name (51 modules)
Export sims
Deferred drvmgt
Deferred <wine-loader>
Deferred rpcrt4<elf>
\ rpcrt4
Deferred libxcursor.so.1
Deferred libxfixes.so.3
Deferred libxcomposite.so.1
Deferred libxrandr.so.2
Deferred libxrender.so.1
Deferred libxxf86vm.so.1
Deferred imm32<elf>
\ imm32
Deferred libxcb.so.1
Deferred libice.so.6
Deferred libx11.so.6
Deferred libsm.so.6
Deferred winex11<elf>
\ winex11
Deferred libexpat.so.1
Deferred libfontconfig.so.1
Deferred libz.so.1
Deferred libfreetype.so.6
Deferred libxdmcp.so.6
Deferred libxext.so.6
Deferred system.drv16.so
Deferred system.drv16
Deferred lz32<elf>
\ lz32
Deferred advapi32<elf>
\ advapi32
Deferred gdi32<elf>
\ gdi32
Deferred user32<elf>
\ user32
Export kernel32<elf>
\ kernel32
Deferred libm.so.6
Deferred libxinerama.so.1
Deferred libxau.so.6
Deferred libuuid.so.1
Deferred version<elf>
\ version
Export ntdll<elf>
\ ntdll
Deferred libdl.so.2
Deferred libc.so.6
Deferred libpthread.so.0
Deferred libnss_files.so.2
Deferred libwine.so.1
Deferred ld-linux.so.2

prio (all id:s are in hex)
tink\.wine\drive_c\Program Files\Maxis\The Sims\Sims.exe

in sims (+0x9885) (0x0033fe1c)
sims (+0x16992) (0x0033fea8)
in kernel32 (0x0033fee8)
in ntdll (0x0033fef8)
d_entry_point+0x70() in ntdll (0x0033ffc8)
ntdll (+0x37d6a) (0x0033ffe8)

PirateJonno wrote:yup, see here: http://appdb.winehq.org/objectManager.p … n&iId=1015. It's a good idea to check there before trying to install something. I can personally confirm that the sims 3 works though.
Thanks for that ... When you say Sims 3, is that the name, or does it have another title.
Cheers,
Bernie

Wine and Intel HD 3000 with lib32-intel-dri

I have a HP ProBook 4530s with Intel HD 3000 graphics. Wine doesn't find the graphics card. Usually lib32-intel-dri has solved this, however this time it didn't.
fixme:d3d:wined3d_guess_card No card selector available for GL vendor 0x4 and card vendor 0000 (using GL_RENDERER "Gallium 0.4 on llvmpipe (LLVM 0x301)").
I don't recognize the Gallium/llvmpipe part. Is it some new part of the graphics driver architechture that wine can't recognize?

I have this problem too (ati radeon hd 6670 with ati-dri drivers here). On clean wine:
$ WINEPREFIX=$(mktemp -d) wine dxdiag
fixme:storage:create_storagefile Storage share mode not implemented.
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
fixme:storage:create_storagefile Storage share mode not implemented.
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
fixme:iphlpapi:NotifyAddrChange (Handle 0xefe308, overlapped 0xefe320): stub
fixme:storage:create_storagefile Storage share mode not implemented.
fixme:iphlpapi:NotifyAddrChange (Handle 0x101e8e0, overlapped 0x101e8ec): stub
wine: configuration in '/tmp/tmp.moZglmSWXW' has been updated.
fixme:d3d:wined3d_guess_card No card selector available for GL vendor 0x4 and card vendor 0000 (using GL_RENDERER "Gallium 0.4 on llvmpi
pe (LLVM 0x301)").
wine: Unhandled page fault on read access to 0xffffffff at address 0xf2905535 (thread 0009), starting debugger...
Unhandled exception: page fault on read access to 0xffffffff in 32-bit code (0xf2905535).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:f2905535 ESP:0032cb68 EBP:7e1ddd30 EFLAGS:00210202( R- -- I - - - )
EAX:0000001c EBX:00000054 ECX:7e1f2780 EDX:00000000
ESI:00000038 EDI:7e2bc4b4
Stack dump:
0x0032cb68: 7e246f48 7e244020 00000000 f583eff4
0x0032cb78: 7e1f83d0 7e1f83d0 00000003 00000004
0x0032cb88: 00000000 00000000 f75a8420 f583d810
0x0032cb98: 7e1f83d0 00000000 7e1f83d0 f542fc38
0x0032cba8: 7e1f83d0 7e246f48 00000005 f5c23ff4
0x0032cbb8: 7e1f83d0 7e23deb8 7e23de88 f5b8c8af
000c: sel=0067 base=00000000 limit=00000000 16-bit --x
Backtrace:
=>0 0xf2905535 (0x7e1ddd30)
0xf2905535:
Modules:
Module Address Debug info Name (76 modules)
ELF 7b800000-7ba3d000 Deferred kernel32<elf>
\-PE 7b810000-7ba3d000 \ kernel32
ELF 7bc00000-7bcd3000 Deferred ntdll<elf>
\-PE 7bc10000-7bcd3000 \ ntdll
ELF 7bf00000-7bf04000 Deferred <wine-loader>
ELF 7e3f6000-7e3fc000 Deferred libxfixes.so.3
ELF 7e3fc000-7e407000 Deferred libxcursor.so.1
ELF 7e5a2000-7e5cb000 Deferred libexpat.so.1
ELF 7e5cb000-7e600000 Deferred libfontconfig.so.1
ELF 7e600000-7e610000 Deferred libxi.so.6
ELF 7e610000-7e614000 Deferred libxcomposite.so.1
ELF 7e614000-7e61d000 Deferred libxrandr.so.2
ELF 7e61d000-7e627000 Deferred libxrender.so.1
ELF 7e627000-7e62d000 Deferred libxxf86vm.so.1
ELF 7e62d000-7e631000 Deferred libxinerama.so.1
ELF 7e631000-7e655000 Deferred imm32<elf>
\-PE 7e640000-7e655000 \ imm32
ELF 7e655000-7e677000 Deferred libxcb.so.1
ELF 7e677000-7e67d000 Deferred libuuid.so.1
ELF 7e67d000-7e697000 Deferred libice.so.6
ELF 7e67d000-7e697000 Deferred libice.so.6
ELF 7e697000-7e7ce000 Deferred libx11.so.6
ELF 7e7ce000-7e7e0000 Deferred libxext.so.6
ELF 7e7e0000-7e7e9000 Deferred libsm.so.6
ELF 7e7e9000-7e877000 Deferred winex11<elf>
\-PE 7e7f0000-7e877000 \ winex11
ELF 7e877000-7e88e000 Deferred libz.so.1
ELF 7e88e000-7e92a000 Deferred libfreetype.so.6
ELF 7e958000-7ea83000 Deferred oleaut32<elf>
\-PE 7e970000-7ea83000 \ oleaut32
ELF 7ea83000-7eb02000 Deferred rpcrt4<elf>
\-PE 7ea90000-7eb02000 \ rpcrt4
ELF 7eb02000-7eb1c000 Deferred version<elf>
\-PE 7eb10000-7eb1c000 \ version
ELF 7eb1c000-7ebe9000 Deferred gdi32<elf>
\-PE 7eb30000-7ebe9000 \ gdi32
ELF 7ebe9000-7ed3c000 Deferred user32<elf>
\-PE 7ec00000-7ed3c000 \ user32
ELF 7ed3c000-7eda7000 Deferred advapi32<elf>
\-PE 7ed50000-7eda7000 \ advapi32
ELF 7eda7000-7eecf000 Deferred ole32<elf>
\-PE 7edc0000-7eecf000 \ ole32
ELF 7ef7e000-7ef8b000 Deferred libnss_files.so.2
ELF 7ef8b000-7efd2000 Deferred libm.so.6
ELF 7efd5000-7efe5000 Deferred libbz2.so.1.0
ELF 7efe5000-7f000000 Deferred dxdiag<elf>
\-PE 7eff0000-7f000000 \ dxdiag
ELF f4989000-f5b2a000 Deferred swrast_dri.so
ELF f5b2a000-f5b44000 Deferred libgcc_s.so.1
ELF f5c2c000-f6fdf000 Deferred r600_dri.so
ELF f6fdf000-f6fe8000 Deferred librt.so.1
ELF f6fe8000-f6ff5000 Deferred libdrm.so.2
ELF f6ff5000-f700e000 Deferred libxcb-glx.so.0
ELF f700e000-f7011000 Deferred libx11-xcb.so.1
ELF f7011000-f7015000 Deferred libxdamage.so.1
ELF f7015000-f702b000 Deferred libglapi.so.0
ELF f702b000-f7081000 Deferred libgl.so.1
ELF f70af000-f718d000 Deferred opengl32<elf>
\-PE f70d0000-f718d000 \ opengl32
ELF f718d000-f71a1000 Deferred psapi<elf>
\-PE f7190000-f71a1000 \ psapi
ELF f71a1000-f7213000 Deferred ddraw<elf>
\-PE f71b0000-f7213000 \ ddraw
ELF f7213000-f7359000 Deferred wined3d<elf>
\-PE f7220000-f7359000 \ wined3d
ELF f7359000-f7396000 Deferred d3d9<elf>
\-PE f7360000-f7396000 \ d3d9
ELF f7396000-f73bb000 Deferred dxdiagn<elf>
\-PE f73a0000-f73bb000 \ dxdiagn
ELF f73d3000-f73d8000 Deferred libdl.so.2
ELF f73d9000-f73e0000 Deferred libxdmcp.so.6
ELF f7402000-f7406000 Deferred libxau.so.6
ELF f7406000-f75ac000 Deferred libc.so.6
ELF f75ac000-f75c7000 Deferred libpthread.so.0
ELF f75c7000-f770a000 Dwarf libwine.so.1
ELF f770b000-f772d000 Deferred ld-linux.so.2
ELF f772d000-f772e000 Deferred [vdso].so
Threads:
process tid prio (all id:s are in hex)
00000008 (D) C:\windows\system32\dxdiag.exe
00000009 0 <==
0000000c services.exe
00000045 0
00000030 0
0000000e 0
0000000d 0
00000012 explorer.exe
00000013 0
0000002d winedevice.exe
00000034 0
00000033 0
0000002f 0
0000002e 0
I tried wine-git from aur, fails with same error. I can't get trace with gdb, but running wine with
WINEDEBUG=+all wine dxdiag
gives something similar. Log is quite big (62Mb) and from different executable, but i think all revelant info is here:
19.337:0009:trace:module:load_dll Found L"C:\\windows\\system32\\ddraw.dll" for L"DDRAW.DLL" at 0x7dfb0000, count=3
19.337:0009:trace:heap:RtlFreeHeap (0x110000,70000062,0x1c2ad0): returning TRUE
19.337:0009:Ret KERNEL32.LoadLibraryA() retval=7dfb0000 ret=10001b82
19.337:0009:Call KERNEL32.GetProcAddress(7dfb0000,1000e1bc "DirectDrawCreate") ret=10001bb1
19.337:0009:Ret KERNEL32.GetProcAddress() retval=7dfb1b0c ret=10001bb1
19.337:0009:Call ddraw.DirectDrawCreate(00000000,0033f240,00000000) ret=10001be6
19.337:0009:trace:ddraw:DirectDrawCreate driver_guid (null), ddraw 0x33f240, outer_unknown (nil).
(lots of text)
20.396:0009:Ret ddraw.DirectDrawCreate() retval=00000000 ret=10001be6
20.396:0009:trace:ddraw:ddraw1_QueryInterface iface 0x1980cc, riid {b3a6f3e0-2b43-11cf-a2de-00aa00b93356}, object 0x33f248.
20.396:0009:trace:ddraw:ddraw7_QueryInterface iface 0x1980c0, riid {b3a6f3e0-2b43-11cf-a2de-00aa00b93356}, object 0x33f248.
20.396:0009:Call wined3d.wined3d_mutex_lock() ret=7dfbb2cc
20.396:0009:Ret wined3d.wined3d_mutex_lock() retval=00000000 ret=7dfbb2cc
20.396:0009:trace:ddraw:ddraw7_QueryInterface (0x1980c0) Returning IDirectDraw2 interface at 0x1980c8
20.396:0009:trace:ddraw:ddraw2_AddRef 0x1980c0 increasing refcount to 1.
20.396:0009:Call wined3d.wined3d_mutex_unlock() ret=7dfbb31a
20.396:0009:Ret wined3d.wined3d_mutex_unlock() retval=00000000 ret=7dfbb31a
20.396:0009:trace:ddraw:ddraw2_Release 0x1980c0 decreasing refcount to 0.
20.396:0009:trace:ddraw:ddraw1_SetCooperativeLevel iface 0x1980cc, window (nil), flags 0x8.
20.396:0009:trace:ddraw:ddraw7_SetCooperativeLevel iface 0x1980c0, window (nil), flags 0x8.
20.396:0009:trace:ddraw:DDRAW_dump_cooperativelevel - DDSCL_NORMAL
20.396:0009:Call wined3d.wined3d_mutex_lock() ret=7dfbd7b7
20.396:0009:Ret wined3d.wined3d_mutex_lock() retval=00000000 ret=7dfbd7b7
20.396:0009:Call wined3d.wined3d_get_adapter_display_mode(001ba280,00000000,0033f1b4) ret=7dfbd987
20.396:0009:trace:d3d:wined3d_get_adapter_display_mode wined3d 0x1ba280, adapter_idx 0, display_mode 0x33f1b4, rotation 0x18c.
20.396:0009:Call user32.EnumDisplaySettingsExW(001baaf4 L"\\\\.\\DISPLAY1",ffffffff,0033efd4,00000000) ret=7de1eaaa
20.396:0009:trace:x11settings:X11DRV_EnumDisplaySettingsEx mode -1 (current) -- getting current mode (desktop)
20.396:0009:trace:x11settings:X11DRV_EnumDisplaySettingsEx mode 0 -- 800x600x32bpp @60 Hz (desktop)
20.396:0009:Ret user32.EnumDisplaySettingsExW() retval=00000001 ret=7de1eaaa
20.396:0009:trace:seh:raise_exception code=c0000005 flags=0 addr=0x7de1eb46 ip=7de1eb46 tid=0009
20.396:0009:trace:seh:raise_exception info[0]=00000001
20.396:0009:trace:seh:raise_exception info[1]=0000018c
20.396:0009:trace:seh:raise_exception eax=0000018c ebx=7deefff4 ecx=00000000 edx=0033f1b4 esi=001ba290 edi=0033f0b0
20.396:0009:trace:seh:raise_exception ebp=0033f0c8 esp=0033ef90 cs=0023 ds=002b es=002b fs=0063 gs=006b flags=00210297
20.396:0009:trace:seh:call_stack_handlers calling handler at 0x403988 code=c0000005 flags=0
20.396:0009:Call KERNEL32.UnhandledExceptionFilter(0033eb24) ret=00402baa
0009: create_event( access=001f0003, attributes=00000002, manual_reset=1, initial_state=0, objattr={rootdir=0000,sd={},name=L""} )
0009: create_event() = 0 { handle=0058 }
wine: Unhandled page fault on write access to 0x0000018c at address 0x7de1eb46 (thread 0009), starting debugger...
For me native apps works too (glxgears and glxgears32 from mesa-demos and lib32-mesa-demos). I don't have any 64-bit windows apps to test. Here is similar bug report (closed): https://bugs.archlinux.org/task/27645.
edit: typo
Last edited by hiciu (2012-07-11 07:15:25)

Wine and WoW Cataclysm beta.

Hello all,
Cataclysm used to work on this install, but now does not. I know cataclysm is in beta, so it is unsupported, but my none beta wow works perfectly.
What happens is, I copied my cataclysm install from my working windows box. Launched cataclysm on Arch and it worked. Played like that for a couple days. blizzard had a small update at which point I got the following error, which I will post below. I then ran Cataclysm in windows, updated and then recopied to arch. This again, worked...until yesterday. I played in the AM, and then when I came to play in the evening, I started getting the error below. I recopied from windows, but that did not work.
Is this something that can be fixed via a patch to wine or something on my system? or is it a "wait until it's released" type of thing? THe only reason I ask is, WoW works, Cataclysm did work but now doesn't
ERROR
$ wine wow.exe -opengl
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: cannot open shared object file: No such file or directory
fixme:process:GetLogicalProcessorInformation (0x33f640,0x33fc40): stub
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (3000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT 3000
fixme:process:GetLogicalProcessorInformation (0x151bfd8,0x151c5d8): stub
fixme:process:GetLogicalProcessorInformation (0x151bfec,0x151c5ec): stub
fixme:wininet:CommitUrlCacheEntryInternal entry already in cache - don't know what to do!
fixme:process:GetLogicalProcessorInformation (0x33f47c,0x33fa7c): stub
fixme:process:GetLogicalProcessorInformation (0x33f47c,0x33fa7c): stub
archive Data\enUS\base-enUS.MPQ opened
archive Data/Cache/SoundCache-3.MPQ opened
archive Data/Cache/SoundCache-2.MPQ opened
archive Data/Cache/SoundCache-1.MPQ opened
archive Data/Cache/SoundCache-0.MPQ opened
fixme:process:GetLogicalProcessorInformation (0x161e394,0x161e994): stub
archive Data/wow-update-12694.MPQ opened
archive Data/Cache/enUS/patch-enUS-12694.MPQ opened
archive Data/Cache/patch-base-12694.MPQ opened
archive Data/wow-update-12759.MPQ opened
archive Data/Cache/enUS/patch-enUS-12759.MPQ opened
archive Data/Cache/patch-base-12759.MPQ opened
archive Data/wow-update-12803.MPQ opened
archive Data/Cache/enUS/patch-enUS-12803.MPQ opened
archive Data/Cache/patch-base-12803.MPQ opened
archive Data/wow-update-12857.MPQ opened
archive Data/Cache/enUS/patch-enUS-12857.MPQ opened
archive Data/Cache/patch-base-12857.MPQ opened
archive Data/wow-update-12942.MPQ opened
archive Data/Cache/enUS/patch-enUS-12942.MPQ opened
archive Data/Cache/patch-base-12942.MPQ opened
archive Data/wow-update-12984.MPQ opened
archive Data/Cache/enUS/patch-enUS-12984.MPQ opened
archive Data/Cache/patch-base-12984.MPQ opened
archive Data/wow-update-13066.MPQ opened
archive Data/Cache/enUS/patch-enUS-13066.MPQ opened
archive Data/Cache/patch-base-13066.MPQ opened
archive Data/wow-update-13117.MPQ opened
archive Data/Cache/enUS/patch-enUS-13117.MPQ opened
archive Data/Cache/patch-base-13117.MPQ opened
archive Data/Cache/enUS/SoundCache-enUS.MPQ opened
archive Data/Cache/SoundCache-patch.MPQ opened
archive Data\art.MPQ opened
archive Data\world.MPQ opened
archive Data\sound.MPQ opened
archive Data\enUS\locale-enUS.MPQ opened
archive Data\enUS\speech-enUS.MPQ opened
fixme:win:EnumDisplayDevicesW ((null),0,0x33ed74,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x33ec38,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x33f118,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x33f18c,0x00000000), stub!
fixme:win:EnumDisplayDevicesW ((null),0,0x33f050,0x00000000), stub!
wine: Unhandled page fault on write access to 0x00000069 at address 0x7bc4787c (thread 0009), starting debugger...
err:seh:raise_exception Unhandled exception code c0000005 flags 0 addr 0x7bc4787c
UPDATE:
As an FYI (if you're scratching your head) I can run this same install of cataclysm on a Ubuntu 9.10 box.
I appreciate any help that you can offer.
--nixIT
Last edited by nixIT (2010-10-12 01:59:17)

StuMx wrote:
Did you edit your config.wtf file? if not just add the following to your file:
SET gxAPI "OpenGL"
or try running it with the -opengl flag
wine "/path/to/WoW/Wow.exe" -opengl
Yes, I have tried both of those. I read through the entire arch wiki entry on WoW and followed it exactly, no success. I have also tried directx mode just in case it would prefer that, still corruption.
I previously used Ubuntu and had no issues whatsoever. Not complaining, I just know that at one point it did work with my video card. That was the lucid build so it would have been 10.04 catalyst drivers?

Invalid Page Fault Error Messages - ICC Profiles and Fonts

Possible causes of these error messages include bad ICC profiles and/or bad fonts. See below for corrective measures

Q: Message reads:
PHOTOSHP caused an invalid page fault in module
KERNEL32.DLL at 017f:bff7b9f5. Registers:
EAX=796692e0 CS=017f EIP=bff7b9f5 EFLGS=00210202 EBX=00d0fe28 SS=0187 ESP=00c10000...
A: You have an incompatible or corrupt ICC profile in your
Windows/System/Color folder (win 98/98SE/Me) or ./system32/spool/drivers/color (win2k).
Make a temporary folder, ICMs, under and move all the
ICM and ICC files to that folder.
Start PS and make sure it restarts OK.
Now move back JUST THE PROFILES YOU NEED to Windows\System\Color (win 98/98SE/Me) or ./system32/spool/drivers/color (win2k)
Also see: http://www.adobe.com/support/techdocs/1c4f6.htm

Svchost.exe with "Dhcp, eventlog, lmhosts" services is generating thousands of page faults and I/O reads per second?

On one of our Windows 2008 R2 Enterprise (SP1) servers, we're noticing a strange phenomenon.....that the svchost.exe that hosts "Dhcp, eventlog, lmhosts" is constantly generating page faults....a few thousand per second, accumulating to billions of total
page faults. I/O reads and I/O other are also rising every second. Cpu is consistently 2%, and memory is constant. (~40M).
I'm guessing that it's the eventlog service because our HP openview log reader (opcle.exe) is also working hard to keep up. I've searched for others posting a similar problem but am coming up empty handed.
This is a MS Analysis Services 2008 server, but we haven't noticed any problems coming from SSAS. We have other file sharing-related jobs that interact with this server, that sometimes take 30 min and sometimes 6 hours, for the same workload....and
we're thinking that the 6 hour runs are somehow related to this process's unusual page faults.
Anyone else seen this eventlog strange behavior?
Thanks
-Mark

Hi,
The best thing would be downloading the Process Explorer and analyzing the problem.
Process Explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653
For how to use Process Explorer to troubleshoot the performance issue, please refer to the following Microsoft TechNet blogs:
HIGH CPU – SVCHOST.EXE
http://blogs.technet.com/b/askperf/archive/2009/04/10/prf-high-cpu-svchost-exe.aspx
Getting Started with SVCHOST.EXE Troubleshooting
http://blogs.technet.com/b/askperf/archive/2008/01/11/getting-started-with-svchost-exe-troubleshooting.aspx
If you find the cause is Automatic update, please also refer to the following Microsoft TechNet blog:
Automatic Update causes SVCHOST.exe high CPU
http://blogs.technet.com/b/asiasupp/archive/2007/05/29/automatic-update-causes-svchost-exe-high-cpu.aspx
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Invalid Page fault in IMM32.dll on Japanese Win 98

Hi
First of all, let me say that I'm new to internationalization fundamentals.
My Java application uses i18n.jar for internationalization support(primarily Japanese) and everything seems to be fine on all OSes(Win2k,NT,98,Solaris etc), except that in particular menu options in Japanese version of Win98(m/c has MS-IME 98 running), a Windows fatal error pops up saying "Javaw caused a invalid page fault in module IMM32.dll". IMM32.dll, I understand, is the dll required for i18n support in Windows.
This error comes up if we exit immediately after launching application or when trying to launch new windows for charts etc.
Could you please suggest a workaround or a fix to this issue? What could be the root cause of the problem, I mean, does i18n.jar use the IMM32.dll, or is it just a conflict? Have there been other such cases?
Thanks for all your advice in advance
Regards
Santosh

If Javaw is causing the page fault, that's very much a bug in native code (i.e. Windows-only stuff) within the VM.
Search through the bug database on this site, and you'll more than likely find a corresponding bug report for this if it's been around a while and is fairly easy to produce. If you can't find it, submit it - I'm sure the Sun guys would be concerned to hear that Javaw is crashing and burning.
Hope that helps!
Martin Hughes

Wine and Neatimage

I do all my digicam image management in Linux. Sometimes I need the neatimage tool to get rid of some noise. It should run under wine as it does in gentoo, but I get this from the console:
laptop ~]$ wine .wine/drive_c/Program Files/Neat Image/NeatImage.exe
fixme:ntdll:TIME_GetTZAsStr Can't match system time zone name "CET" to an entry in TZ_INFO
fixme:ntdll:TIME_GetTZAsStr Please add appropriate entry to TZ_INFO and submit as patch to wine-patches
fixme:ntdll:TIME_GetTZAsStr Can't match system time zone name "CET" to an entry in TZ_INFO
fixme:ntdll:TIME_GetTZAsStr Please add appropriate entry to TZ_INFO and submit as patch to wine-patches
wine: Unhandled exception (thread 0009), starting debugger...
WineDbg starting on pid 0x8
Unhandled exception: page fault on read access to 0x778f83d1 in 32-bit code (0x00526f6d).
In 32 bit mode.
wine: Unhandled exception (thread 000b), starting debugger...
WineDbg starting on pid 0xa
Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x7778a7cc).
In 32 bit mode.
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:003b GS:0033
EIP:7778a7cc ESP:7789f7cc EBP:7789f980 EFLAGS:00210206( - 00 - RIP1)
EAX:7fa54400 EBX:77799960 ECX:171803e4 EDX:00000000
ESI:00000000 EDI:7fa40200
Stack dump:
0x7789f7cc: 7fa40200 7fa40000 8a9871a6 00000000
0x7789f7dc: 00000000 00000001 00000001 7789f81c
0x7789f7ec: 7789fb04 7789faec 7789f828 00000040
0x7789f7fc: 7789f988 77795629 77efd7d0 00000000
0x7789f80c: 00000000 00000000 00400000 7fa54400
0x7789f81c: 77efd7d0 7789f988 7789f86c 7789f8f8
Backtrace:
=>1 0x7778a7cc pe_load_debug_info+0x3dc in dbghelp (0x7789f980)
2 0x777848b5 module_get_debug+0x95 in dbghelp (0x7789f99c)
3 0x777925c2 SymFromAddr+0x52 in dbghelp (0x7789f9bc)
4 0x778d5a20 stack_get_frame+0x70 in winedbg (0x7789f9e4)
5 0x778c8d44 display_print+0x64 in winedbg (0x7789fb78)
6 0x778d887f dbg_exception_prolog+0x11f in winedbg (0x7789fbd0)
7 0x778d8d48 .L151+0x1e0 in winedbg (0x7789fdbc)
8 0x778da36f main+0x36f in winedbg (0x7789fe90)
9 0x778c4320 __wine_exe_main+0x18a in winedbg (0x7789ff20)
10 0x77b82db2 start_process+0xf2 in kernel32 (0x7789fff4)
11 0xb7fbfef1 wine_switch_to_stack+0x11 in libwine.so.1 (0x00000000)
0x7778a7cc pe_load_debug_info+0x3dc in dbghelp: movl 0x0(%edx,%esi,4),%eax
Wine-dbg>quit
WineDbg terminated on pid 0xa
This happens on both systems where I run arch independently
Anyone on this?[/code]

iphitus wrote:Can't you do manipulations like that in the GIMP?
I am affraid not. Neatimage is pretty brilliant. Believe me, I have searched for similar gimp tools. Gaussian selective blur is the closest I get , but nowhere near as refined as Neatimage.
Some things from the windows world are not yet replaceble, like excel for example, when you want to make a lot of graphs....:-( (oo.org sucks with graphs and macros)

F50DBG32 caused an invalid page fault in module MSVCRT40.DLL at 0167:7967d7f0.

HI all,
I trying to run a multi-tabbed form built in forms 5.0 with Oracle 8.1.7 db running on a solaris m/c.
The client m/c os is windows '98.
but when trying to run it, i get the following error:
F50DBG32 caused an invalid page fault in
module MSVCRT40.DLL at 0167:7967d7f0.
Registers:
EAX=796aadff CS=0167 EIP=7967d7f0 EFLGS=00010286
EBX=00aef3f4 SS=016f ESP=00aef284 EBP=00aef290
ECX=008e56c0 DS=016f ESI=00357365 FS=586f
EDX=0000001f ES=016f EDI=008e579c GS=0000
Bytes at CS:EIP:
8a 06 46 8a 27 47 38 c4 74 f2 2c 41 3c 1a 1a c9
Stack dump:
00aef3f4 00aef43c ffffffff 00aef2a8 617e7573 008e579c 00357365 008e56c0 008e56a8 00aef3a8 617d8bae 0101343c 008e56c0 00aef43c 00000001 00aef3f4
. The problem is tat the same form runs fine in a Win-NT machine.
Unfortunately, we have a mixed group of users for this form. some of them have NT and some others have Win95/98...
Any help?
Regards
-Sree Ram

Hi all,
Found the prob' or atleast the workaound for this...
APart from setting the fill property of the canvases to Transparent, set the same for all the DB blocks too...
Now my form is working fine in both OS.
Regards
-Sree Ram

Hotsync Crashes (invalid page fault) - address book

Help - I know I have an old setup, but I really need help ...
I'm trying to sync between a Samsung i500 and my win 98se computer using Palm desktop 4.1 and Hotsync Manager 4.0.4. It's been working great for YEARS but I did something and now it always crashes. I CAN'T update - I have a full office of these computers running software that CAN'T run on newer systems.
I usually sync between REA (a little organizer program) and Palm and my phone, but that crashed so I EXPORTED the address database (in a comma delimited form) then brought up the database in Works and cleaned it out of comma's and any bad records I could find.
I've tried uninstalling Palm Desktop AND doing a HARD reboot on my phone, then syncing with NO addresses. That worked once. But then when I imported the addresses in Palm Desktop, on the next HotSync it crashed again (invalid page fault).
My address book is about 10,700 records, I don't know if that is the problem. HELP
Post relates to: None

No one replyed ... but I managed to call Palm One (866-751-7256) paid tech support. Herb correctly pointed out article 24515 that points out a maximum of 10,376 records that can be synced. So I need to (somehow) delete some records. Then I'll try reloading software and syncing.
Post relates to: None

Failed client instal (orainst | msvcrt.dll) page fault

I am trying to uninstall the oracle client (all componenets) from a Windows 95 machine and while trying to unistall the process causes an illegal operation and then bombs out. I try to reinstall over the existing installation and I get the same thing "illegal operation". Oraninst.exe is causing a page fault in msvcrt.dll. This is a predictable reproducable problem that occurs everytime I run the installation or try to run the unistallation. I read a microsoft technet document about this problem and updated the C runtime library "msvcrt.dll" to the lates version and continue to get the same error. Anyone else ever see this error. I would imagine it would be quite common?

Originally posted by Martin Vonk Ian Leveson ([email protected]):
This problem persists still:
([email protected]):
Hi,
y2k bug.....
Download Y2K compliant installer > from Oracle.
Or try > >http://www.chow1.myweb.nl The Fix for the Y2K Problem (Installer version 33124) seems to help for
most of the development tools, however, not
for the Oracle Workgroup Server v. 7.3.4 for
Win NT 4.0 (build 1381 with Service Pack 5),
which still crashes in ORADIM73.exe with the
usual Exception, Access Violation (0xc0000005), Address: 0x77f6750b
This appears to happen while it is updating the registry.
Anyone know of a patch or anything for this?
Ian
null

Fix? iTunes slow to import CD, sync iPod, freezes on credits - Page Faults

All,
Using Windows XP on a computer with 512 M of memory (lightning fast for it's time) I found that iTunes would import CDs at 0.3x to 0.7x, way too slow. iTunes resonded slugglishly to UI commands. And the credits screen (help - about iTunes) would freeze. Other applications do not have this problem. I found that iTunes memory management is sub optimal, at best. This causes iTunes to swap portions of its active program memory to the hard disk, slowing the interface by a factor of x1000.
How to verify if this is happening:
1. Open task manager by RIGHT clicking on the date on the windows control bar
2. Click on the "Process" tab, then from the menu select "View" then "Select columns . . "
3. Make sure "CPU", ("handles" (i.e. open files), "threads" (i.e. parallel processes), and "page faults" are checked. Page faults are swap of memory to the hard disk.
4. Open iTunes, use as usual (e.g. view credits)
5. If iTunes becomes slow (right away in my case), watch for increasing page faults (what I experience) or excessive threads or handles.
In my case I'm getting over 1000 page hits a second when viewing credits. Someone didn't use good programming skills. (Not necessarily Apple, see below)
Note: I see, and expect, the CPU to go to 100% while importing CDs.
Please note: ** I do not use a mail client on this machine. ** I use a web based mail program and do not use MS outlook, and I don't want to. I only mention this because when I used iTunes, it locked up and I also received an error saying that I needed to setup my outlook client. Turning off automatic updates seems to have solved this lockup.
Since I run Word, excel, iExlorer, games, and windows media manager without error I'm having trouble understanding why iTunes uses so much system resources. Poor development tools? Virtual machine? Bug in complier library?
Thigs to try to fix:
Since this is a memory issue: Try one or more of the following:
Minimize the screen when importing CD (screen calls are a hog)
This is what made the most improvement for me.
Stop all other programs
This allowed me to stop the credits screen.
Try stopping / halting your antivirus programs
Try updating your Video card driver.
Note: I have a 'business' style video card. Aboslutly no bells/whistles. I do not wish to upgrade to a directX card just to allow easy transfers to my iPod / iTouch. I am using an Intel 82810E Graphics Controller with drivers provided by Wicrosoft.
Set your performance for best performance:
+ Right click on the "My Computer" icon
+ Click on "advanced" - "Performance" - Visual
+ Click on "adjust for best performace"
Note: This changes the XP look, had no effect for me.
If you are still having trouble, close iTunes, open the Windows Media player to import your CD with the following settings: Tools - Options
Player - Deselect start player in media guide (unless you really like it)
Copy Music - Deselect Copy Protect Music (otherwise it only works in WMP)
Root cause?
I suspect that the iTunes is calling a function that it expects the video card to do easily. I suspect that the video card doesn't have that functionality, so the video card driver tries to emulate the functionality. The slow response from the driver apparently causes iTunes to go haywire.
If you read this far:
Please let me know if you found this helpful by writing a response.
If you can think of anything (other than buying a new computer) that would allow this applicaiton to work, let me know. BTW: A real old version of quicktime works just fine on my 486!
Apple developers:
I would be open for a test bed if you need older HW to qualify on.
Any idea why the credits would cause the page faults?
Any way to use a bare bones video library (e.g. no scrolled fades etc.)?
For an application that essentially copies files to my iPod, it sure uses a lot of resources.

Welcome to AD!
This is a user chat board - Apple developers won't be seeing your post. You could re-send it using
itunes menu > Help > Provide iTunes Feedback
Hoewever, don't expect a reply.
the iTunes 8.1 system requirements page states
+A DirectX 9.0-compatible video card with 32MB of video RAM; 64MB recommended+
It's not that surprising that itunes doesn't act right on your PC.
Message was edited by: Katrina S.

Wine and unhandled page fault

Similar Messages

Maybe you are looking for