Wine wont run "wineboot.exe error"

Alright so i'm new to arch and ive gotten everything else running right except wine! not sure why it keeps erroring out on me but here's error log from terminel also i'm running 64bit version of arch
[xsubzer0x@xsubzer0x ~]$ winetricks
Trying to load PE image for unsupported architecture (I386)
err:module:import_dll Loading library comctl32.dll (which is needed by L"C:\\windows\\system32\\shell32.dll") failed (error c000007b).
err:module:import_dll Library shell32.dll (which is needed by L"C:\\windows\\system32\\winemenubuilder.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\windows\\system32\\winemenubuilder.exe" failed, status c0000135
Trying to load PE image for unsupported architecture (I386)
err:module:import_dll Loading library comctl32.dll (which is needed by L"C:\\windows\\system32\\shell32.dll") failed (error c000007b).
err:module:DelayLoadFailureHook failed to delay load shell32.dll.SHGetFolderPathW
wine: Call from 0x7f965538f404 to unimplemented function shell32.dll.SHGetFolderPathW, aborting
wine: Unimplemented function shell32.dll.SHGetFolderPathW called at address 0x7f965538f404 (thread 000b), starting debugger...
Unhandled exception: unimplemented function shell32.dll.SHGetFolderPathW called in 64-bit code (0x00007f965538f404).
Register dump:
rip:00007f965538f404 rsp:00007f9654d5f460 rbp:00007f9654f85280 eflags:00000206 ( - -- I - -P- )
rax:00007f9654d5f4a0 rbx:00007f9654d5f480 rcx:00007f9654d5f480 rdx:0000000000000000
rsi:00007f9654d5f610 rdi:00007f9654d5f4b0 r8:00007f9654f852c2 r9:00007f9654d5f600 r10:0000000000000002
r11:0000000000000246 r12:00007f9654f85260 r13:00007f9656dfe0f0 r14:00007f9656dfe120 r15:0000000000000000
Stack dump:
0x00007f9654d5f460: 00007f9654d5f480 0000000000000000
0x00007f9654d5f470: 00007f9654f852c2 00007f9654d5f600
0x00007f9654d5f480: 0000000180000100 0000000000000000
0x00007f9654d5f490: 00007f965538f404 00007f9600000002
0x00007f9654d5f4a0: 00007f9654f85280 00007f9654f852c2
0x00007f9654d5f4b0: 0000000000000000 0000000000000001
0x00007f9654d5f4c0: 00007f96556ee2b0 00007f96553e1f70
0x00007f9654d5f4d0: 00007f96553e1f05 00007f96569f88ee
0x00007f9654d5f4e0: 0000003000000030 00007f9654d5f5e0
0x00007f9654d5f4f0: 00007f9654d5f500 0000000000000000
0x00007f9654d5f500: 0000000000000000 0000000000000000
0x00007f9654d5f510: 0000000000000000 0000000000000000
Backtrace:
0x00007f965538f404: movq 0x00000000000000c0(%rsp),%mm6
Modules:
Module Address Debug info Name (9 modules)
PE 51ff0000- 51ff4000 Deferred imm32
PE 533b0000- 533b4000 Deferred winex11
PE 53ce0000- 53ce4000 Deferred gdi32
PE 53fb0000- 53fe7000 Deferred user32
PE 54340000- 54347000 Deferred shlwapi
PE 549f0000- 549f4000 Deferred advapi32
PE 54d70000- 54d78000 Deferred wineboot
PE 55360000- 55446000 Deferred kernel32
PE 55fa0000- 55fa4000 Deferred ntdll
Threads:
process tid prio (all id:s are in hex)
00000008 ntdll.dll
00000009 0
0000000a (D) C:\windows\system32\wineboot.exe
0000000b 0 <==
0000000e services.exe
00000016 0
00000015 0
00000014 0
00000010 0
0000000f 0
00000011 winedevice.exe
00000017 0
00000013 0
00000012 0
0000001a explorer.exe
0000001b 0
Backtrace:
/home/xsubzer0x/.themes/WoW-Dark/gtk-2.0/styles/murrine-style-images-and-labels:20: error: unexpected identifier `textstyle', expected character `}'
Trying to load PE image for unsupported architecture (I386)
err:module:import_dll Loading library comctl32.dll (which is needed by L"C:\\windows\\system32\\shell32.dll") failed (error c000007b).
err:module:import_dll Library shell32.dll (which is needed by L"C:\\windows\\system32\\winemenubuilder.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\windows\\system32\\winemenubuilder.exe" failed, status c0000135
Trying to load PE image for unsupported architecture (I386)
err:module:import_dll Loading library comctl32.dll (which is needed by L"C:\\windows\\system32\\shell32.dll") failed (error c000007b).
err:module:DelayLoadFailureHook failed to delay load shell32.dll.SHGetFolderPathW
wine: Call from 0x7f61d142f404 to unimplemented function shell32.dll.SHGetFolderPathW, aborting
wine: Unimplemented function shell32.dll.SHGetFolderPathW called at address 0x7f61d142f404 (thread 000b), starting debugger...
Unhandled exception: unimplemented function shell32.dll.SHGetFolderPathW called in 64-bit code (0x00007f61d142f404).
Register dump:
rip:00007f61d142f404 rsp:00007f61d0dff460 rbp:00007f61d1025280 eflags:00000206 ( - -- I - -P- )
rax:00007f61d0dff4a0 rbx:00007f61d0dff480 rcx:00007f61d0dff480 rdx:0000000000000000
rsi:00007f61d0dff610 rdi:00007f61d0dff4b0 r8:00007f61d10252c2 r9:00007f61d0dff600 r10:0000000000000002
r11:0000000000000246 r12:00007f61d1025260 r13:00007f61d2e9e0f0 r14:00007f61d2e9e120 r15:0000000000000000
Stack dump:
0x00007f61d0dff460: 00007f61d0dff480 0000000000000000
0x00007f61d0dff470: 00007f61d10252c2 00007f61d0dff600
0x00007f61d0dff480: 0000000180000100 0000000000000000
0x00007f61d0dff490: 00007f61d142f404 00007f6100000002
0x00007f61d0dff4a0: 00007f61d1025280 00007f61d10252c2
0x00007f61d0dff4b0: 0000000000000000 0000000000000001
0x00007f61d0dff4c0: 00007f61d178e2b0 00007f61d1481f70
0x00007f61d0dff4d0: 00007f61d1481f05 00007f61d2a988ee
0x00007f61d0dff4e0: 0000003000000030 00007f61d0dff5e0
0x00007f61d0dff4f0: 00007f61d0dff500 0000000000000000
0x00007f61d0dff500: 0000000000000000 0000000000000000
0x00007f61d0dff510: 0000000000000000 0000000000000000
Backtrace:
0x00007f61d142f404: movq 0x00000000000000c0(%rsp),%mm6
Modules:
Module Address Debug info Name (9 modules)
PE ce090000- ce094000 Deferred imm32
PE cf450000- cf454000 Deferred winex11
PE cfd80000- cfd84000 Deferred gdi32
PE d0050000- d0087000 Deferred user32
PE d03e0000- d03e7000 Deferred shlwapi
PE d0a90000- d0a94000 Deferred advapi32
PE d0e10000- d0e18000 Deferred wineboot
PE d1400000- d14e6000 Deferred kernel32
PE d2040000- d2044000 Deferred ntdll
Threads:
process tid prio (all id:s are in hex)
00000008 ntdll.dll
00000009 0
0000000a (D) C:\windows\system32\wineboot.exe
0000000b 0 <==
0000000e services.exe
00000016 0
00000015 0
00000014 0
00000010 0
0000000f 0
00000011 winedevice.exe
00000017 0
00000013 0
00000012 0
0000001a explorer.exe
0000001b 0
Backtrace:
^C

I think you need to look into how to run wine on 64 bit systems (if you did, your post does not hint at it).
64 bit-related problems go into the 'Other architectures' subforum.

Similar Messages

  • Fofix win't run (numpy python error?)

    [gert@boks lib]$ fofix
    Traceback (most recent call last):
    File "./FoFiX.py", line 108, in <module>
    from GameEngine import GameEngine
    File "/opt/fofix/src/GameEngine.py", line 32, in <module>
    from numpy import array, float32
    File "/usr/lib/python2.7/site-packages/numpy/__init__.py", line 136, in <module>
    import add_newdocs
    File "/usr/lib/python2.7/site-packages/numpy/add_newdocs.py", line 9, in <module>
    from numpy.lib import add_newdoc
    File "/usr/lib/python2.7/site-packages/numpy/lib/__init__.py", line 13, in <module>
    from polynomial import *
    File "/usr/lib/python2.7/site-packages/numpy/lib/polynomial.py", line 11, in <module>
    import numpy.core.numeric as NX
    AttributeError: 'module' object has no attribute 'core'
    My google-fu pointed me towards me lacking f2py, but from what I can understand, this is included in python2-numpy?
    Installed python packages:
    [gert@boks lib]$ pacman -Qs python
    local/cx_freeze 4.2.1-1
    A set of utilities for freezing Python scripts into executables
    local/dbus-python 0.83.1-2
    Python bindings for DBUS
    local/gstreamer0.10-python 0.10.18-3
    Python bindings for GStreamer 0.10
    local/kdebindings-python 4.6.0-1
    KDE bindings for python
    local/mutagen 1.20-3
    An audio metadata tag reader and writer implemented in pure python
    local/pycups 1.9.53-1
    Python CUPS Bindings
    local/pygobject 2.26.0-2
    Python bindings for GObject
    local/pygtk 2.22.0-3
    Python bindings for the GTK widget set
    local/pyogg 1.3-6
    Python ogg wrapper library
    local/pysmbc 1.0.10-1
    Python libsmbclient bindings
    local/python 3.1.3-2
    Next generation of the python high-level scripting language
    local/python-imaging 1.1.7-2
    PIL. Provides image processing capabilities for python
    local/python-lxml 2.2.8-2
    Python binding for the libxml2 and libxslt libraries
    local/python-mechanize 0.2.4-1
    Stateful programmatic web browsing in Python
    local/python-numeric 24.2-5
    Numerical Python adds a fast array facility to the Python language
    local/python-opengl 3.0.1-2
    The cross platform Python binding to OpenGL and related APIs
    local/python-pygame 1.9.1-3
    Python game library
    local/python-pysqlite 2.6.0-2
    A Python DB-API 2.0 interface for the SQLite embedded relational database engine
    local/python-sqlalchemy 0.6.6-1
    Python SQL toolkit and Object Relational Mapper
    local/python2 2.7.1-4
    A high-level scripting language
    local/python2-cairo 1.8.10-1
    Python2 bindings for the cairo graphics library
    local/python2-distribute 0.6.14-2
    A collection of extensions to the Python 2 distutils
    local/python2-numpy 1.5.1-1
    Scientific tools for Python
    local/python2-pyparsing 1.5.5-1
    General parsing module for Python
    local/python2-qt 4.8.3-1
    A set of Python 2 bindings for the Qt toolkit
    local/python2-sip 4.12.1-1
    A tool that makes it easy to create Python 2 bindings for C and C++ libraries
    local/pyvorbis 1.4-5
    Python vorbis wrapper library
    local/pyxml 0.8.4-8
    Python XML parsing library

    Has this problem come back? I'm using Blas and Lapack 3.3.1 but I'm getting the same error as the original poster meaning FOFIX won't start.
    ben@bahamut ~ $ fofix
    Traceback (most recent call last):
    File "./FoFiX.py", line 108, in <module>
    from GameEngine import GameEngine
    File "/opt/fofix/src/GameEngine.py", line 32, in <module>
    from numpy import array, float32
    File "/usr/lib/python2.7/site-packages/numpy/__init__.py", line 136, in <module>
    import add_newdocs
    File "/usr/lib/python2.7/site-packages/numpy/add_newdocs.py", line 9, in <module>
    from numpy.lib import add_newdoc
    File "/usr/lib/python2.7/site-packages/numpy/lib/__init__.py", line 13, in <module>
    from polynomial import *
    File "/usr/lib/python2.7/site-packages/numpy/lib/polynomial.py", line 11, in <module>
    import numpy.core.numeric as NX
    AttributeError: 'module' object has no attribute 'core'

  • When i do initial set up w creative cloud set uo wont run send error message"installer failed to initialize" why and how can i get pass this

    When I do initial set up with creative cloud set up it wont run a send error message "installer failed to initialize" comes up. Why and how can I get passed this?

    Error "Installer Failed to Initialize" | Install desktop application | Windows

  • Wine - Wineboot.exe Runs When Launching Apps

    Anyone else experiencing 'wineboot.exe' starting and continuing to run whenever any Wine application is launched? I've never seen this behavior before (though it could have been going on for a little while without my noticing).
    I always thought 'wineboot.exe' was used to simulate Windows reboots, but I'm unclear now what it does or is doing. I have since read a little about it possibly having some functionality related to launching applications in the Startup folder, but I have no startup apps or services, and it seems if it were doing that, it would launch, perform its functions then terminate.
    The process can be killed without any ill effects on currently running Wine applications as far as I can tell.
    Is this a Wine bug, a package bug, or intended behavior? If intended, can it be turned off natively (without having to run a 'kill' script)?
    Thanks.
    PS
    Is it possible that this process was split off from wineserver in a recent Wine update? The only reason I ask is that 'wineserver' seems to use much less RAM than I remember it using. Probably wrong about that, though.

    I haven't spent a lot of time on this subject as I can't find much about it anyway, and I really didn't want to sign up with Google groups to seek answers, but for now it seems the issue is moot in the near-term anyway:
    http://groups.google.com/group/comp.emu … f8b03fc168
    [The run and runonce functionality] is causing a lot of problems, and so it has been disabled in the current git, and should be disabled in the next release of Wine. You can revert to the previous version of Wine while waiting for 0.9.54, or edit your registry and delete the Run and RunOnce keys.
    I wasn't really having issues with 'wineboot.exe' other than it wastes resources, but it looks like its gone for now. Hopefully, if and when they get other issues ironed out and try to re-implement it, it will run, do its job and exit.

  • Error while running sawserver.exe file

    Hi All ,
    I installed OBIEE 11.1.5 in my machine and Database is in different machine (For RCU) .OBIEE reports are working fine but, I tried to run sawserver.exe file to register new instanceconfig file to implement multiple rpds and Catalogs in OBIEE 11G by referring the below link.
    http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
    Command that I used is : sawserver.exe -c D:\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfigdemo.xml
    Am getting the Error : the procedure entry point long jmp count not be located in the dynamic link library orauts.dll
    Thanks in Advance .

    Hi,
    How can i do it in OBIEE 11G? Any help will be grateful
    Regards,
    Joni

  • Error while running sapccmsr.exe on Netweaver Trial

    Hi there,
    I've installed Netweaver Trial on my laptop, and I'm trying to run 'sapccmsr.exe -R' from the command to register the CCMS monitoring agent.
    It almost works, but then comes up with the following error:
    "After entering the RFC logon info for the user, the password
    will be stored here on this machine in a Secure Storage.
          client [000]                        :
          user  [CSMREG]                      : sap*
          language  [EN]                      :
          hostname of NSP message server [localhost] :
          use Load Balancing  [n]/y ?         : n
          hostname of application server [localhost] :
          system number (00 - 98)  [00]       :
          [optional] route string             :
          trace level    [0]                  :
          please enter password for [NSP:000:sap*]: *******
    Try to connect ...
    INFO: Updated saprfc.ini in agent work directory C:\saploc\PRFCLOG\sapccmsr
    ERROR: Registration failed: Can't get version of NSP. RfcRc = 2, C_CALL_FAILED
    RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
    message:
    status:  EXCEPTION C_CALL_FAILED RAISED
    intstat:
    INFO: dsr: dsrlib unloaded.
    EXITING with code 1"
    any help much appreciated, I'm a SAP newbie !
    TIA.
    Stuart.

    Hi,
    I have exactly the same problem.
    sapccmsr -R -j2ee pf=<dir>
          client [000]                        :
          user  [CSMREG]                      :
          language  [EN]                      :
          hostname of PIT message server  :
          use Load Balancing  [n]/y ?         :
          hostname of application server  :
          system number (00 - 98)      :
          [optional] route string             :
          trace level    [0]                  :
          please enter password for [PIT:000:CSMREG]:
    Try to connect ...
    INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/<SID>_<SN>/sapccmsr
    ERROR: Registration failed: Can't get version of PIT. RfcRc = 2, C_CALL_FAILED
    RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
    message:
    status:  EXCEPTION C_CALL_FAILED RAISED
    intstat:
    INFO: dsr: dsrlib unloaded.
    I have tried to register it via visual admin but the same error appeared.
    OS: AIX
    DB: oracle 10.2.0.4.0
    SAP component: PI7 (SAP NetWeaver 2004s)
    Any help?
    Thanks in advance
    Edited by: Jan Hinka on Jul 2, 2009 6:46 PM

  • Getting error while running sapinst.exe

    Hi Gurus,
    I have an error while running sapinst.exe.
    ===============================
    Error: Home directory is not available for user sapsdt
    Opened sylib722.dll
    exe dir is I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818
    MessageLib initialized successfully.
    Creating file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
    Removed file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
    Initialized SAP kernel tracing to file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel
    Opened I:\usr\sap\PD3\tmp\3\sapinst_exe.10440.1359197818/iaguieng722.dll
    Initialized SAP kernel tracing to file dev_sap_kernel
    receiving and sending on port 21200
    existence check for user PD3ADM returned true.
    inserted account (***ADM, S-1-5-21-2072974133-1425365782-667646791-181569, USER) into the accountcache.
    Account sapsdt has ADS path 'WinNT://US5885SPAD/sapsdt'
    existence check for user sapsdt returned true.
    inserted account (sapsdt, S-1-5-21-1572296251-1555274763-1146236042-1004, USER) into the accountcache.
    Password set for account sapsdt.
    Environment variable SAPINST_JRE_HOME set to value 'I:/usr/sap/***/tmp/3/sapinst_exe.10440.1359197818/jre'.
    System call failed. Error 2 (The system cannot find the file specified.
    ) in execution of system call 'ATL::CRegKey::Open' with parameter (hKeyParent, SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-1572296251-1555274763-1146236042-1004, 0x20019), line (95) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp), stack trace: sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
    syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
    synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
    synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
    d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
    Exception thrown near line 95 in file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
    Stack trace:
    sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
    syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
    synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
    synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
    d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
    At line 95 file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
    Call stack:
    sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
    ======================================
    can someone please help me out for error.
    Thanks in advance

    check user profile in AD, add a path in the user profile Home folder directory of user SAPSDT, restart sapinst.

  • Error while running 'ldifde.exe' to import the schema file

    Hello,
    I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
    Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution. 
    Regards.
    Ashane Deshapriya ( MCP )

    Can you run these commands from an elevated powershell and try to install exchange. 
    Import-Module ServerManager
    Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
    If that also fails please post the error.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Error while running exe (error 10)

    Hi,i am not able to run and build exe and getting error like exe is not corporate whitelist and will not be allowed,but if i run it in other system its running  without any error,particularly in that system this error is coming,but one thing is before it was working fine in that same system, now i am getting that error.can any one help me to resolve this error.

    Hi geetha,
    for "exe is not corporate whitelist" you should definitely ask your company's IT team...
    For error 10: it seems there's a FileCopy or FileOpen operation in your program not able to succeed. You should do some basic debugging to find the place/function that throws that error...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

    Hello,
    I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's.  I have worked every error resolution I can find, but I can't get past this error.
    Error:
    The following error was generated when "$error.Clear();
    install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
    " was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
    Any assistance is appreciated.

    Are you running the installation from an ISO-file?
    If so, then copy the files (preferably
    Exchange 2013 w. SP1) to the local disk
    and run the install with elevated privileges.
    Martina Miskovic

  • Error while running clustersetup.exe

    Hi,
    Can somebody please help me on installing Oracle9i RAC.
    I have 2 nodes ( Dell poweredge 6300 with Windows 2003 Advance server ). I have already configured public and private ip. Also, i am able to ping private and public ips from both the nodes. The storage is also configured.
    I am running clustersetup.exe from pre_install folder. The screen where it asks for pulic and private names , the nodes are not automatically displayed. I have to manually key in the pulic/private names. In the end the cluster setup fails with following error
    Unexpected signal : Exception_Access_violation at pc = ...
    Finally, i checked the required files are already copied on windows\system32\osd9i folder on both nodes. The registry entry is also updated under hkey_local\software\oracle\osd9i. But, OracleCMservice9i , OracleOjectService and OracleClusterVolumeService services are not created.
    Can someody please help me resolve this.
    Thanks in Advance
    Regargds
    -Firoz

    Did you add "D:\jdk1.4\bin" to the end of the Path variable? Perhaps the OS is finding another java.exe before it finds the one in d:\jdk1.4\bin. Try putting "D:\jdk1.4\bin;" at the start of the Path variable.

  • "Error running javac.exe compiler" when using ant to compile Eclipse plugin

    Hi
    I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
    My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target
    <!-- ===================================================================
    Compile specified plugin
         target parameters:
              param.plugin.dir: the plugin directory
              param.plugin.targetJarFile: the name of jar file for the given plugin
              param.plugin.src.dir: the folder name of source codes. Note: it is relative path name
              param.fork: indicate if another process is forked to run javac
    =================================================================== -->
    <target name="compilePlugin">
         <!-- Prepare compile environment -->
         <!-- Delete obsolete build folder -->
         <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
         <!-- Delete obsolete jar file -->
         <delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
         <mkdir dir="${param.plugin.dir}/${build.dir}"/>
         <!-- Compile source codes -->
         <javac      srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
                   destdir="${param.plugin.dir}/${build.dir}"
                   failonerror="${javacFailOnError}"
                   verbose="${javacVerbose}"
                   debug="${javacDebugInfo}"
                   deprecation="${javacDeprecation}"
              optimize="${javacOptimize}"
                   source="${javacSource}"
                   target="${javacTarget}"     
                   fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
              <classpath refid="compile.classpath" />
         </javac>
         <!-- Create plugin jar file -->
         <copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
              <fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
         </copy>
         <jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
         <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
    </target>
    Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
    For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
    BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
    Any help is highly appreciated.
    Many thanks
    Oceanman

    I encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
    fork="${param.fork}"
    memoryInitialSize="256m"
    memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
    fork="true"
    memoryInitialSize="256m"
    memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps.

  • Just reinstalled itunes due to need to fix msvcr80.dll error; now itunes wont run because itunes library.itl cant be read created by newer version itunes.  how do i resolve this ?

    just reinstalled itunes due to need to fix msvcr80.dll error;
    now itunes wont run because itunes library.itl cant be read created by newer version itunes. 
    how do i resolve this ?

    By way of experiment, let's first try specifically choosing a library for iTunes to open.
    Quit iTunes if that error message is showing. Now hold down your Shift key, and then open iTunes. (Keep holding down the shift key while iTunes is opening.)
    You should see a dialog asking you if you want to choose or create a library, as per the following screenshot:
    Click "Choose Library ..."
    You should now see a screen like the following screenshot:
    Select the "iTunes Library.itl" file (shown circled in the screenshot) and click "Open".
    Does your iTunes library open without the error?

  • GeoKettle: Error running javac.exe compiler

    Hi,
    I am trying to use GeoKettle exactly as mentioned at
    http://209.85.229.132/search?q=cache:JHfrxCo7y0YJ:forge.osor.eu/docman/view.php/143/250/Kettle_Devel_guide_v0.odt+geokettle+spoon+java+api&cd=2&hl=en&ct=clnk&client=firefox-a
    But when I try to build it, i am getting the following error.
    [javac] Compiling 135 source files to D:\workspace\geokettle\classes-core
    BUILD FAILED
    D:\workspace\geokettle\build.xml:74: Error running javac.exe compiler
    Can anyone guide me please to resolve this problem.
    Best Regards
    Tabbasum

    most likely the javac executable is not on the system path. Try typing 'javac -version' in a command prompt and see what response you get.
    If it is something like 'javac is not a recognized...', locate where the JDK is installed and add its bin subdirectory to the PATH system variable. Restart any command prompt and type javac again.
    You DID have a JDK installed, didn't you?

  • Java.exe Error while running Tomcat

    Hello,
    I encountered a very strange Java.exe error while testing my servlet.
    Here is the screen dump of the aforementioned error:
    http://www.shelleysauction.com/db07-22-02.jpg . The error's message is
    as follows: "There is no disk in the drive. Please insert a disk into
    drive \Device\Harddisk1\DR1."
    Would appreciate any help; I don't claim to be any good at this stuff.
    All of the information on that page is derived from a database on a
    remote intranet machine (including input type, title, descriptions,
    etc.). I am not sure if it is a server-side error or a client-side
    error as my computer is running the server; another computer is not
    possible--I'm a lowly summer intern hired to build a servlet that
    interfaces with a database, and I'm not a good programmer.
    The only thing I can think of is that I recently began using the
    com.oreilly.servlet.* package for its Base64Encoder, Base64Decoder, and
    MultiPartRequest methods. That form was working fine for weeks before
    then.
    Jennica Humphrey

    Hello all,
    Thank you for your help. I was using the MultiPartRequest class in the com.oreilly.servlet.* package so I could add a "section" that allowed users to upload CSV files to the database. It required, I think, that an opening FORM tag would have the following attribute: enctype="multipart/form-data"
    Now, I made a HtmlGenerator class that writes the HTML for me, with all sorts of methods like html.startTableCell( String stylesheet, String align, String valign, String width ) so I could just type html.startTableCell( "palepurple", "left", "top", "50%" ); ... made reading my own crap a lot easier.
    Anyway, I had html.startForm( ) and html.startUploadForm( )... the only difference was that the upload one had the enctype="multipart/form-data" attribute and the first one didn't. Now, my DoPost() method was supposed to determine if there were "regular" parameters passed on by the form and if there were "MultiPart" parameters... with code like this:
    // Initialize MultipartRequest.  This is required for file uploading.
    boolean isMulti = true;
    MultipartRequest multi = null;
    try {
         multi = new MultipartRequest( request, "..\\..\\Files", 10 * 1024 * 1024 );
    } catch( Exception e ) { isMulti = false; }
    Enumeration paramNames = request.getParameterNames();
    // Attempt to initialize parameter names.
    try {
         if ( !paramNames.hasMoreElements( ) ) paramNames = multi.getParameterNames();
    } catch ( Exception e ) {
         /* Ignore */
    ***code snipped out***
    if ( isMulti )
          paramValues = multi.getParameterValues( paramName );
    else
         paramValues = request.getParameterValues( paramName );This was working fine, but after submitting "regular" (not uploaded) forms 3 or 4 times, it'd give me that error. Then I decided to change html.startForm() to work exactly like html.startUploadForm()--in effect making every form a MultiPartRequest. It works fine, without any errors. Do you know what was going on?

Maybe you are looking for

  • Right side CTRL and ALT don't work

    As a southpaw, I'm finding it a bit frustrating to work with my fresh install of CS5 Illustrator.  The CTRL and ALT buttons only behave properly when then left side buttons are used.  I have the mouse in my left hand, so I want to use the CTRL and AL

  • Regarding SOA Suite Certification

    Hello Guys, I am new entrant into fusion middleware. As you all know there are different suites that make up fusion middleware, And each suite has different components. I was primarily looking into SOA suite as I feel thats where most companies are i

  • Importing a AVCHD movie from the Panasonic TZ20

    I have bought a Panasonic TZ20 but the manual mentions that the AVCHD format from Panasonic is not supported by Mac !!!! How can I import a AVCHD movie to store in Full HD on my Macbook Pro using the SD card or USB cable? Is the issue the OS or iPhot

  • Use AME watch folders with preset ContentAnalysis

    I have to do speech recognition on a number of files. The AME watch folders do exactly what I want - automatically processing files put into a specific folder. But I am unable to select "ContentAnalysis" as my preferred preset, which seems to be the

  • I cannot use my Apple email primary Apple email account.

    I cannot use my Apple email as my username or primary Apple email account. That is a fact. It has been verified by first and 2nd level support. I had to go get a Google email account to use for my primary Apple email account. That is unequivocally th