Winodws 2000 to Windows 2003 Migration EP60 SP2 - NW04 SP14

Anyone doing a windows upgrade during the migration. SAP does not officailly support it (as of yet). If there is anyone who can share experiences please do!

Stephen -
I believe that SAP does allow migration from W2K to W2K3. Please refer to the migration information at https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000579959&
Specifically, slide 4 mentions the move from W2K to W2K3.
Regards,
Kyle

Similar Messages

Windows 2003 R2 Enterprise SP2- File Share suddently no one can access. After reboot, it is back normal. Why?

We have file server, which is using windows 2003 R2 Enterprise Edition, Service Pack 2. Today suddently no one can access its file share. I try to login to the server and open services, but it is so slow to respond. I have to reboot the machine. After the
server reboot, it is back normal. Any one know why?
Here are the system errors shown before the machine rebooted. First question, I am not sure which error really causes the problem. The machine is set to use WSUS to get windows update. On the automatic updates, it is set to "Download updates
for me, but let me choose when to install them." Second question, why the machine is still trying to install update without permission? Please help. Thanks.
Event Type: Error
Event Source: Windows Update Agent
Event Category: Installation
Event ID: 20
Date:  12/13/2013
Time:  12:55:58 PM
User:  N/A
Computer: CHCDSSRV1
Description:
Installation Failure: Windows failed to install the following update with error 0xfffffbf8: Automatic Updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 57 69 6e 33 32 48 52 65   Win32HRe
0008: 73 75 6c 74 3d 30 78 66   sult=0xf
0010: 66 66 66 66 62 66 38 20   ffffbf8
0018: 55 70 64 61 74 65 49 44   UpdateID
0020: 3d 7b 44 36 37 36 36 31   ={D67661
0028: 45 42 2d 32 34 32 33 2d   EB-2423-
0030: 34 35 31 44 2d 42 46 35   451D-BF5
0038: 44 2d 31 33 31 39 39 45   D-13199E
0040: 33 37 44 46 32 38 7d 20   37DF28}
0048: 52 65 76 69 73 69 6f 6e   Revision
0050: 4e 75 6d 62 65 72 3d 30   Number=0
0058: 20 00                      .
Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 46
Date:  12/13/2013
Time:  1:23:58 PM
User:  N/A
Computer: CHCDSSRV1
Description:
The time service encountered an error and was forced to shut down. The error was: 0x800706BB: The RPC server is too busy to complete this operation.

Hi,
As you mentioned, users suddenly cannot access file share, the issue most likely caused by third party software, such as antivirus software. Please refer to the thread below to troubleshoot the issue:
File share become inaccessible
http://social.technet.microsoft.com/Forums/windowsserver/en-US/19205ea0-3efe-4c9c-a625-8ccf93744948/file-share-become-inaccessible?forum=winserverDS
For your second question, you can Configure Automatic Updates group policy and choose
Auto download and notify for install. This option automatically begins downloading updates and then notifies a logged-on administrative user prior to installing the updates
For more detailed information, please refer to the article below:
Configure Automatic Updates by Using Group Policy
http://technet.microsoft.com/en-us/library/cc720539(ws.10).aspx#WUS_ConfigureAutomaticUpdates
Please also refer to the article below to troubleshoot the error message:
The Windows Time service may generate event ID 7023 after you upgrade to Windows Server 2003 Service Pack 1
http://social.technet.microsoft.com/Forums/en-US/a86b4b3f-044a-499d-ba2f-d817931de6a0/windows-2003-r2-enterprise-sp2-file-share-suddently-no-one-can-access-after-reboot-it-is-back?forum=winserverfiles
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OS upgrade from windows 2000 to Windows 2003/ 2008

Hi friends,
We are planning to do an OS upgrade of our current production system from windows 2000 to Windows 2003/ 2008.
Can you please refer me to any existing document /Forum link which has a detailed strategy outlaying the activites to be performed for this.
Regards,
Rohit

Hello,
Just upgrading the OS to 2003 should be OK as 640 - 700 kernel is supported on Windows 2003
www.service.sap.com/pam
For 2008 minimum level is 700 SR3 best to do a system copy
SAP on Microsoft Windows:
SAP on Microsoft Windows
regards,
John Feely

Upgrade from Windows 2000 to Windows 2003

Dear all,
We are upgrading our CRM Sever from Versio 4.0 to CRM 5.0. Do we need to upgrade our Operating system from Windows 2000 to Windows 2003?
Kind regards,
Raquel Mendoza

Hi Eric,
I have checked the link. Does this mean that I need to upgrade my OS to WINDOWS SERVER 2003 64bit?
> Released for CRM Server Database Platforms SAP KERNEL 7.00 64-BIT MS SQL SERVER...
Released Database Version Operating System
MS SQL SERVER 2000 WINDOWS SERVER 2003/X64 64BIT
MS SQL SERVER 2000 IA64 WINDOWS SERVER 2003/IA64 64BIT
MS SQL SERVER 2005 IA64 WINDOWS SERVER 2003/IA64 64BIT
MS SQL SERVER 2005/X86_64 WINDOWS SERVER 2003/X64

Oracle 9i and upgrade Windows 2000 to Windows 2003

Hi,
We have a Oracle 9i (9.2.0.6.0 Enterprise Edition) running under Windows 2000 and the OS group is going to upgrade to Windows 2003.
My question is: will Oracle keep working?
I hope so because we are not allowed to upgrade to 10g or 11g and I think Oracle 9i for Windows 2003 can't be downloaded anymore.
regards,
Ivan

Rajesh wrote:
No,you have to upgrade your database(startup upgrade) or compile all invalid objects,using above sqls due to your OS version changed and your cold backup shoul be startup upgrade/migrate option.This is not required.
Please refer to :
Process To Upgrade the Operating System and Oracle Database Server [ID 407055.1]
Procedure When Upgrading Windows 2003 Operating System From Standard To Enterprise Ed. [ID 798175.1]
RegardsRajesh
Please see your suggested doc
- Take a cold backup of you existing database before you start OS and DB upgrade .
- Upgrade the Operating system (refer your OS documentation for detail)
- Execute 'relink all '
- Verify that the existing database is working fine with the upgraded Operating system.
- Take one more cold backup before you start Database upgrade
- Install Oracle Software (to which you want to upgrade) in new oracle home.
- Upgrade database (refer the upgrade/migration guide for complete instruction ) *Process To Upgrade the Operating System and Oracle Database Server [ID 407055.1]*
It means you need startup upgrade/migrate.

Windows 2003 migration to Server 2012 R2

Hi,
We have task to plan Windows 2003 Server migration to Windows Server 2012 R2. Since Server 2003 is running with domain services and file share for users.
We have to use the same hardware for installation with all required roles. Does anyone support if this physical Windows 2003 server can be migrate first on hyperV VM as to host temporary for user access on the other side physical server will be configured
with Windows 2012 server with all required roles and testing.
Mumtaz

Technically, you can often move a physical instance of Windows Server 2003 to a virtual instance. However, it is not the recommended path. If you have to keep it on 2003, it a better solution is to build a new VM running Windows Server 2003 and then
install the application. Performing a Physical to Virtual is not a guarantee that things will run correctly in the VM. The best solution is to get off 2003 ASAP.
Search TechNet for '2003 to 2012 migration'. Microsoft has provided a lot of information on how to migrate.
. : | : . : | : . tim

Moving oracle 9i database from windows 2000 to windows 2003 server

hi everybody,
plz provide me a solution how to move oracle 9i database from windows 2000 server to windows 2003 server with step by step and also with commands plz as i am very new to oracle
thanks in advance
suresh

Install 9i on windows 2003 server and patch to the same level as the Oracle on Windows 2k
Shutdown and make a cold backup of your old database. That includes datafiles, controlfiles, redo files, init file (spfile)
Copy and put these files to the exact same directory structure/location, for example if old file is under D:\oradata\mysid\ then the file on new file should be under same directory. (If you are using Network Storage that make things easier, just mapping to the same drive letter.)
Also make sure archive log dest and all dump dest directories are created. You don't have to copy all old logs and dump files over.
Use oradim to create a new service for the database instance
http://www.psoug.org/reference/oradim.html
Set proper ORACLE_HOME, ORACLE_SID envionment varibles
Run netca to configure listener, actually copy listener.ora and tnsnames.ora to $ORACLE_HOME\network\admin will do
Try to start the database

Oracle stability on Windows 2000 and Windows 2003

Hello everyone,
since the beginning of my career in the database world (5 years ago), I work in a company where the operating system we are using is windows.
Since the beginning, we are shutting down and restarting every database server (including the OS) on a weekly basis to ensure stability I suppose.
My question is:
Is it still a "good practice" to do that (restarting every database server)? On windows 2000? On windows 2003?
If it is still a "good practice", should it be done on a weekly basis or more on a monthly basis?
Thank's for any input on this open question.
Best regards,
Carl

I ran a 9i RAC on Win2K3 for over 16 months and only periodic reboots for maintenance (OS patches). I had a scheduled time each month (4 hours) to shutdown, take a cold backup, patch the OS, and get everything back up in time for production. This seemed to work just fine. I would caution not to upgrade all your nodes with the OS patches at the same time, however. Leapfrog them so a single bad patch doesn't kill your entire DB.

Migrating to Windows 2003

Hello all,
I'm seeking for expert advice on the migration issue. We are
looking to Migrate from Windows 2000 to Windows 2003, and we are
running ColdFusion MX 7.0.1, enterprise edition, does anybody see
any issues with that, or is it going to be a smooth transition !
Thanks,
Jyoti.

You dont need the nwclient or edir installed on the windows 2003 server for
an mta/poa to function? (ive never done groupwise server components on
windows before but I am in need of doing so currently).
http://abeNd.org - Novell News for IT Professionals
"Gregg A. Hinchman" <[email protected]> wrote in message
news:[email protected]. .
> Pretty straight forward. Shut down the domain MTA, make sure no file
> locks
> on db's, copy the domain directory over to the windows disk -make sure NOT
> to have it run on c:\ -then just install the windows agents and point the
> MTA config file to the domain directory -and you are done.
> --
>
> Take Care.
>
> Gregg A. Hinchman
> Consultant
> [email protected] ( mailto:[email protected] )
>
> A Novell Consulting Partner
> 317.329.0288 Office
> 413.254.2819 eFax
>
> "Courage is doing what is right."
>
> "Do not be bound to any doctrine, theory or ideology, even Buddhist ones.
> All systems of thought are guiding means, not absolute truth." Thich Nhat
> Hanh, Vietnamese monk.
>
>
>
>>>> On 5/21/2007 at 12:03 PM, in message
> <4pj4i.4281$[email protected]>,
> Shabu<[email protected]> wrote:
>> Hi,
>> We have a Primary GroupWise domain server that runs MTA and also
>> secondary
>> domain server that runs MTA and POA. We are planning to migrate our
>> Primary domain server to a Windows 2003 server. What lists of things we
>> need to be aware off when we do Primary domain migration to a Windows
>> 2003
>> Advanced server?

Upgrading Oracle 9.2 (32bit Windows 2000) to 10.2 (64bit Windows 2003)

Hello all,
We currently run SolMan v3.1 on aged 32bit hardware and we plan to upgrade this to SolMan v4 on a new 64bit infrastructure. As part of this task, we would also like to move from Windows 2000 to Windows 2003 x64 and from Oracle 9.2 to Oracle 10.2
The current situation is that the new server is built to Windows 2003 x64 level only. Nothing else is installed on the new server at this time. My plan was to install Oracle 9.2 and SolMan 3.1 and then take a system copy of the existing database and then upgrade it to SolMan v4 and Oracle 10.2 (leaving the old system as-is for recovery reasons, should we run into problems).
Has anyone any experience of doing this in a Windows and Oracle environment who could help me with getting this right?
Many thanks,
Arwel Owen.

Hi all,
As this is a fairly low-priority upgrade, we decided to try to experiment a little to try to avoid the ORacle 9 to 10 upgrade. We decided upon the following approach:
1) Install Windows 2003 x64 (on new server)
2) Install Oracle 10.2 x64
3) Install SolMan v3.1
4) Export existing SolMan v3.1 database (from existing server)
5) Import existing SolMan v3.1 database (onto new server)
6) Upgrade to SolMan v4
We have installed Oracle 10.2 and applied 10.2.0.2 Patchset 1 and all seemed okay. We are now installing SolMan v3.1, but SAPinst crashes out after specifying the SAP system directory and transport host and just before starting the database-dependent cations. The error message is:
<b>ERROR: MDB-06168. Oracle is not installed on this host. Install Oracle before continuing.</b>
Oracle definitely IS installed, but it appears that SAPInst for SolMan v3.1 may be too old to recognise Oracle 10.2.
I thought I'd ask for advice before I go and butcher the KEYDB.XML and ORADBPAR.XML files. (It's only a test install!)
Thanks,
Arwel.

Cisco CSA Vista Beta - doesn't support sp2 for Windows 2003

I understand that in order for us to run this Beta release of CSA, in can only run under sp1 for Windows 2003 server. SP2 is our current standard
Anyone heard when we can expect it out for SP2?

I can't get it to install on the server comes up with an error what is the trick?

Windows 2003 server, Incompatible with Developer 6i and Oracle db 9i???

Hi,
Is there some reason for migrating from Developer 6i and Oracle db 9i to 10g when operating system is migrated from Windows 2000 to Windows 2003 server???
Any document? whitepaper?? thanks

I am with Mediware Information Systems and we have an opening for a Senior Oracle 6i DBA if you know of anyone who has 5 yrs. of Oracle 6i DBA experience. If so, they can send their resume to [email protected] with the subject line 06-029.
Thanks!

Support package / add on import error in DB2 V9.1 / windows 2003 system

Hi
I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
I have selected "Row Compression" and "Deferred Table Creation" during installation.
Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package ALL, tp step "6", return code 0008
The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
2 ETP301
3 ETP361 "96" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
2 ETP301
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090113025807"
1 ETP111 exit code : "8"
1 ETP199 ######################################
I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
Regards,
Nallasivam.D

Hi,
Please find the real error message which I found in the same log file. This is a new installation.
System configuration details:
ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
BASIS and ABAP support pack level: (700) 13.
Error message:
3 ETP399 INDEX IN "IDS#BTABI"
3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
3 ETP399
2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#BTABD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
3 ETP399 IN "IDS#POOLD"
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
Regards,
Nallasivam.D

Unable to install Database 10gR2 on Windows 2003

Hi,
I have Windows 2003 EE with Sp2 installed. I am trying to install Oracle Database 10gR2 but i get error when i click setup.exe.
The error is
*Error in Writing to directory C:\TEMP. Oracle Universial Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory.*
Kindly please help me on this.

I am logged in as admin user and c:\temp is writable. However, i would also like to present one observation that i have made.
My Windows 2003 environment variable is as below
TEMP = %USERPROFILE%\Local Settings\Temp
TMP = %USERPROFILE%\Local Settings\Temp
When i use this parameter setting the error shows different path.
Error in Writing to directory E:\DOCUME~1\ADMINI~1\LOCAL~1\TEMP. Oracle Universial Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory.
But when i change the TEMP paramaters to (i.e i add ";" at the end) then error show different path.
TEMP = %USERPROFILE%\Local Settings\Temp *;*
TMP = %USERPROFILE%\Local Settings\Temp *;*
Error in Writing to directory C:\TEMP. Oracle Universial Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory.
Not sure why this is happening and i believe Windows 2003 SP2 new security policy is restricting me to access the TEMP directory on E:\ drive

Windows 2003 Memory Dump - Bug check Analysis attached

Hi all
I recently have had a Windows 2003 Standard with SP2 server crash with a memory dump
I have used WinDBG to read the file and output below
can anyone shed any light on the faults, or point me in the right direction?
*                        Bugcheck Analysis
KERNEL_MODE_EXCEPTION_NOT_HANDLED (8e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 8081c630, The address that the exception occurred at
Arg3: b7487c30, Trap Frame
Arg4: 00000000
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!IoGetAttachedDevice+c
8081c630 8b4810          mov     ecx,dword ptr [eax+10h]
TRAP_FRAME: b7487c30 -- (.trap 0xffffffffb7487c30)
ErrCode = 00000000
eax=000007f6 ebx=85e76068 ecx=000007f6 edx=00000000 esi=85e76068 edi=89d42020
eip=8081c630 esp=b7487ca4 ebp=b7487ca4 iopl=0         nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000             efl=00010206
nt!IoGetAttachedDevice+0xc:
8081c630 8b4810          mov     ecx,dword ptr [eax+10h] ds:0023:00000806=????????
Resetting default scope
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: DocTransport.ex
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre
LAST_CONTROL_TRANSFER: from 8082db20 to 80827f7d
STACK_TEXT:
b74877fc 8082db20 0000008e c0000005 8081c630 nt!KeBugCheckEx+0x1b
b7487bc0 8088c12a b7487bdc 00000000 b7487c30 nt!KiDispatchException+0x3a2
b7487c28 8088c0de b7487ca4 8081c630 badb0d00 nt!CommonDispatchException+0x4a
b7487ca4 8081c7e1 89d42020 b7487d64 00000000 nt!KiExceptionExit+0x186
b7487cb8 808f44c7 85e76068 b7487d64 08a9ea50 nt!IoGetRelatedDeviceObject+0x63
b7487d38 8088b658 00001e20 00000000 00000000 nt!NtReadFile+0x55
b7487d38 7c82845c 00001e20 00000000 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
08a9ea8c 00000000 00000000 00000000 00000000 0x7c82845c
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!IoGetAttachedDevice+c
8081c630 8b4810          mov     ecx,dword ptr [eax+10h]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!IoGetAttachedDevice+c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrpamp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51d4c567
IMAGE_VERSION: 5.2.3790.5190
FAILURE_BUCKET_ID: 0x8E_nt!IoGetAttachedDevice+c
BUCKET_ID: 0x8E_nt!IoGetAttachedDevice+c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x8e_nt!iogetattacheddevice+c
FAILURE_ID_HASH: {22c1c728-5bf3-efb9-fff4-40d5ae0d47e2}
Followup: MachineOwner

Hi,
For Bug Check 0x8E, it
indicates that a kernel-mode application generated an exception that the error handler did not catch. For more details, please refer to following article and check if can help you.
Bug Check 0x8E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
Did you remember that which operation (or any change) you do before this issue occurred? Or just the server
crashed suddenly?
Please check if all necessary updates were installed and drivers were updated.
à
PROCESS_NAME:
DocTransport.exe
Did you install any third-party application on the server? Please
perform a clean boot and monitor the result.
By the way, as you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. However, it is not
effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

Winodws 2000 to Windows 2003 Migration EP60 SP2 - NW04 SP14

Similar Messages

Maybe you are looking for