Wire transfer payment set up for US

Hi
Has anybode worked on wire transfer set up for US company code ( International payments ) ? Where can I get documentation on this subject ?
Regards
Raj

Hi,
You can set up payment methods for ACH and wire transfers in tcode FBZP. Those are used in F110.
1. Select the payment method for wire or ACH when running F110. It will create a file for you to use for the banks.
2. Setup paying company codes, house banks and accounts, bank determination, country and company payment methods and bank selection. You will have to use program RFFOUS_T for doing the ACH payment.
3. You then do an FTP using the banks software transfer file and select the file you created and then send it to the bank.
4. For wire transfer configuration please use Payment Method T and Payment Program RFFOUS_T also you can use program RFFOEDI1. To customize the program please read program documentation.
Thanks
Arman

Similar Messages

New terms of payment set up for 45 days

Hi All
I need to create a pay terms.The delay is 45 days end of month.
That mean you have a minimum period of 45 days but the payment is on the last day of the month. If customer receive his purchase before the 15 of the month he must pay 1 month and an half, if customer receive after the 15 then a have near two month to pay.How we can define this. Thanks in advance.
Regards
Hari

Hi Quemener Bruno ,
You need to define 2 payment terms with the same name , config Steps are :
step : 1.
Pay Terms : XX45
Daylimit : 15
Account Type :
Fix Days : 45
Additional Month : 1
Default for Baselint Date : as per your requirement
Term : give 31 in Fixed Date
Additional Month 0
Save
step : 2
Pay Terms : XX45
Daylimit : 31
Account Type :
Fix Days : 45,
Additional Month : 1
Default for Baselint Date : as per your requirement
Term : give 31 in Fixed Date
Additional Month 1
Save
Please let me know if you are facing any problem
Regards
Hari

Grouping of payment requests for Wire transfer in f110

Hi Gurus
Please let me know how to Group the payment requests which has Wire transfer as the payment method.
Actually can we group the payment requests for the Wire transfer payment method
I have to show the balance carried forward for the payment advice by grouping them.
If you know solution please let me know.
Thanks in advance
Meenkashi

Meenakshi, You can group the payment request with payment method 'wire'. For grouping them you have to fulfill the following criteria:
1. On the payment method the 'single payment' should not be checked. This is normally the case and in most situations people realize this after lot of failed efforts to find why it is not grouping.
2. On the Business Partner master data you should not have checked 'individual payment' in the 'Payment details' TAB under each company code.(BP role 'Counterparty'
3.In the FRFT screen (if you are doing bank-to-bank transfers and for which you don't need Business Partners) the 'individual payment' should not be checked
4. Onthe BP master data, if you select 'same direction' payment requests flowing in one direction (outflow or inflow) can only be grouped. sometime you would need to group both inflow and outflow (for e.g. In case of commercial paper when you invest, you have to pay only the net amount (Principal - Interest). However SAP generates two different flows - Principal which is outflow, Interest which is inflow.)
5. On the Transaction, in the Payment details TAB you have a slew of options to group - All within Treasury can be grouped, All of a Product category can be grouped, Only flows from an ID no. etc. etc.
6. On the transaction again in the payment details TAB see to it and that you have not checked 'individual payment'.
Hope this helps
Please award points if this information is useful. If you have further doubts please post your doubts and I will try to answer.

Paying for a apple product with a wire transfer

I do not live in the US but I was planning on ordering Mac book pro with retina display via phone and have it ship to a apple store in Miami where I would have picked it up myself. I would have paid using a wire transfer but when I called the apple number i was told that apple would not accept the wire transfer from any bank outside of the US. Can anyone confirms or deny this for me because I thought with the wire transfer payment option that it be accepted from most banks worldwide. If this turns out to true can anyone suggest another way for me to order a custom build laptop and pay using something else.
Thanks

That is correct. Apple will only accept payment by credit or debit card issued in the same country as the Apple Store, and will only deliver within that country.
Two solutions:
Get a friend to buy it for you in the US, or
Order and pay for it in your own country.

Wire Transfer APP

Hi ,
Can someone let me know the configurations required to pay this vendor through wire transfer.
What is the program and form which is used for this purpose .Program , i suppose is RFFOUS_T.What is the form which is used for this purpose.
Regards
Saurabh

Hello
The config of APP is same for all Check, Wire transfer, direct debits and so on.
Make sure you select and assign the wire transfer payment method to the paying company code and the country.
The catch here is to create the bank sub accounts
Using bank subaccounts, you can reconcile the balance of the account at your bank with the balance of your corresponding G/L account.
The subaccounts ensure that all incoming and outgoing payments are only posted to the G/L bank account when the money is actually debited from/credited to your bank account. Incoming and outgoing payments are posted to the main G/L bank account once you receive and enter the account statement from your bank.
The charts of accounts delivered with the standard system contain a number of different bank subaccounts. These include accounts for checks payable, checks receivable, outgoing wire transfers, and bank direct debits
Assign also bank id to pmt method / mention currency / assign account id to the bank sub account.
Check this link too
http://help.sap.com/erp2005_ehp_02/helpdata/en/01/a9b9e7455711d182b40000e829fbfe/frameset.htm
Reg
assign points if useful

How to deal with Wire Transfer in BRS?

Hi,
we are facing a problem with wire transfer in BRS.
For cheque issues and receipts we have selected Algorithm 15 and in assignment field we gave cheque number for this no problem.
for wire transfer we dont get any number how to deal with it, please suggest us.
regards & thanks,
sashi kanth.

Hi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic

How to set up wire transfer for foreign vendor?

Hi all,
Prior to the question I posted, I guess my question is : what configuration steps need to be done in order to set up a wire transfer for foreign vendor?
please advise.

Hi Nancy,
You need to have a Bank Account which is setup to issue payments in foriegn currency.
Apart from that all other steps remain the same as to doing a domestic wire.
Provide points if found usefull.
Thanks,
Praveen

Set up wire transfer for foreign vendor

Hi all,
anyone knows how to set up wire transfer for foreign vendor? please advise.

Hi Nancy,
You need to have a Bank Account which is setup to issue payments in foriegn currency.
Apart from that all other steps remain the same as to doing a domestic wire.
Provide points if found usefull.
Thanks,
Praveen

Wire transfer for USA

Hi,
I have implemented ACH and Check payments, they are working fine. Now the client is asking for Wire transfer.
What payment program is used for wire transfer?
Will it create a DMEE file like ACH with IBAN that can be transmitted to Bank?
How do we manage wire transfer for US local payments where IBAN is not generated?
Pls let me know any other configuration for wire transfers?
Thanks
Srini

Hi
generally for wire transfer setting/configuration - all fields in payment transactions will used - maintained in Vendor master data for wire transfer .
Thanking you
Regards
mahesh

Wire transfer Incoming payment

Hi Gurus,
i got a scenario to import wire transfer file ( one receives from bank) to sap. usually we have transaction to import the lockbox file (T-code FBL2) in to sap and do posting. Similarly, whether is there any t-code or program for importing wire transfer file and do incoming payments in sap.
Thanks in advance.

Hi
Think the below would be helpful:
Wire Transfer - Refers to a same-day transfer of funds from an account at one bank to an account at another bank, initiated over the Fedwire system. The Fed guarantees to pass value as of the date of the Fedwire transfer is initiated provided the transfer meets all required criteria. Fedwire is a part of the Federal Reserve System Communication Systems.
ACH Transfer - Clearinghouse associations in many major cities have developed electronic methods of passing payments among members and other financial institutions in the region, and of exchanging payments among the ACHs themselves. ACH transfers may be either credit transfers (sending funds out) or debit transfers (pulling funds in). Either the payee or the payor may initiate them.
Differences between Wire and ACH
Wire Transfer is geared to a single transfer, while ACH Transfer is geared to handling multiple transfers in a batch mode.
Wire Transfer is geared to same-day settlement, while ACH Transfer is geared to future-date settlement.
Wire Transfer is expensive because of their customized one-at-a time nature, while ACH Transfer is inexpensive because of their structured data format and high-volume batch nature.
Regards
Aravind
Assign points if useful

Wire transfer in Automatic Payment Programme

dear friends
do any body know how to configure wire transfer in APP Pls, let me know it urgent for me if there any documentation on it it will be more helpful for me plz do it fast [email protected]
awaiting for you kind replys i want detailed configuration steps plzzzzz.

1) Setup the vendor master to have "W" (Wire) as the payment method.
2) Configure company codes, payment method "W' in company codes and bank determination in FBZP.
3) Execute the payment program
Here is some documentation that might help.
[https://wiki.sdn.sap.com/wiki/display/ERPFI/PaymentProgram|https://wiki.sdn.sap.com/wiki/display/ERPFI/PaymentProgram]
Assign points if found useful.

Wire transfer for Sweden Vendor

Hello Experts,
We have a new foreign vendor from Sweden and we have to pay him through wire transfer.
a) Can someone let me know the configurations required to pay this vendor through wire transfer.
This is kind of urgent as the payment due date is very near.
b) Can anyone let me know the split of the IBAN number, because I have a very big 24 character IBAN account number that starts with country code SE (Sweden) and I could not figure out the actual account number in that 24 character. I guess SAP allows only 11 character bank account number.
Any help in this regard is highly appreciated and duly rewarded.
Regards,
Sriram

Sriram:
For wire transfer you use "Classic Payment Medium Program" RFFOUS_T.
In the payment method "T" input RFFOUS_T (FBZP > Maintain payment methods in country, also, maintain entries for payment methods in company codes).
Print dataset is LIST3.
Choose outgoing payments, bank transfers, Document type - ZP, Clearing Document type ZV in the "T" payment method configuration.
Once your payment method is configured, you can "check" it in Financial Acc > ARAP > Bus Transactions > Outoging Payments > Automatic Outgoing Payments > Payment Media > Make Settings For Classic Payment Medium Formats > Assign Payment Medium Program For Payment Method In a Country.
Here you will see that your payment method "T" is assigned against RFFOUS_T.
This is just to let you know that the configuration settings are effective.
Next you need to maintain a variant for RFFOUS_T, this can be done in F110 in the last tab.
I don't think IDOCS will be required.
Let me know if you need more info.
Assign points if info helps
Vj

How to address Cash payment, ACH & Wire Transfer to Customers in SAP

Hi Experts,
I have requirement where customers make payments thru cash, ACH & Wire Transfer, could somebody let me know how to address this in SAP and what payments methods needs to be configured and how to use these payment methods and the entire process
Thanks in advance
Best Regards,
gj

Hi Madan,
Whenever you use FBCJ for postings, it has to be for Cash postings only. The Cash posting is default and you don't get the option to enter the cash GL. So, whenever you make postings in FBCJ, one leg has to be Cash A/c(Either DR. or CR.)
My question to you is, why would you like to post Vendor Invoice in FBCJ? You have FB60 to post Vendor Invoice which would post a Credit on vendor and your advance postings in FBCJ would have posted a Dr. on Vendor.
You just need to clear this Dr. and Cr. postings in T-Code F-44 and your transaction is complete. There is no need to try to post Vendor Invoice in FBCJ. Only & Only Cash transactions can be posted in FBCJ.
Hope this helps. If this has answered your query, please close the thread.
Regards,
Kavita

How do I make payment via wire transfer?

I'm from Malaysia and I only have AMEX card, but is not accepted to make payment. How do I make payment via wire transfer?
I am entitled for the promotion: Complete Special Offer for RM1,103/year and I would like to purchase it. Please help.
Thanks.

Hello gracepoon,
one option would be that you use Contact Customer Care = http://helpx.adobe.com/contact.html, by clicking through the headlines.
If none of the conditions is fulfilled, and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
This contact link is "brandnew", please give it a try: What are my contact options?
On the other hand you can have a look there: "Telephone numbers of customer service and technical support Adobe worldwide" >>>
Adobe - Adobe worldwide customer support phone numbers
Good luck!
Hans-Günter

Payment Method- Wire transfer

Hi,
Payment menthod for country is not setup for wires, but it is there for check. Is this only through configuration, or something I can do?.. I am lookin for the solution apart from payment method configuration & using F-53, Is there any other way to proceed further.

Hi Gaurav,
I have checked in SDN, Help.SAP.com. I have clearly mentioned that payment method is not setup for country for wire transfer. I am talking about FBZP. I have 2 methods 1. FBZP 2. F-53, I dont wnat to use FBZP, & For f-53 going forward I have to use f-53 which I dont want. Which is very much clear in my previous query
I have already read the Rules of engagement before posting. Thanks
Regards
Sathish

Wire transfer payment set up for US

Similar Messages

Maybe you are looking for