Wired guest config error: Learn Client IP Address

Hi
I get the following error message when I want enable a wired guest lan on WiSM2

Thanks Scott, it was the right thing. I've deleted all 4 wired guest lan and created new and now it workes propperly. The problem was occured after upgrade to the new version.
I will test in the labor if this problem occours on each upgrade or if it was a single failor.
Kurt

Similar Messages

Plz Solve this Error in    " Client Side Address Validation in Struts "

Hi,
i have created struts project and foll code is written as foll :
plz find out error in code :
struts-config.xml code
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<data-sources />
<form-beans >
<form-bean name="AddressForm" type="com.projectvalidator.form.AddressForm" />
</form-beans>
<global-exceptions />
<global-forwards />
<action-mappings >
<action
input="/validateaddress.jsp"
name="AddressForm"
path="/address"
scope="request"
validate="true"
type="com.projectvalidator.action.AddressAction">
<forward name="success" path="/success.jsp"/>
<forward name="failure" path="/validateaddress.jsp"/>
</action>
</action-mappings>
<message-resources parameter="MessageResources" />

<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames" value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
MessageResources.properties file code
AddressForm.name=Name
AddressForm.address=Address
AddressForm.email=EmailAddress
validation.xml
<?xml version="1.0" encoding="UTF-8"?>
<form-validation>
<formset>

<form name="AddressForm">
<field property="name"
depends="required" >
<arg key="AddressForm.name"/>
</field>
<field property="address"
depends="required" >
<arg key="AddressForm.address"/>
</field>
<field property="email"
depends="required" >
<arg key="AddressForm.email"/>
</field>
</form>
</formset>
</form-validation>
validationaddress.jsp
<%@ page language="java" pageEncoding="UTF-8"%>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-bean" prefix="bean" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-html" prefix="html" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-logic" prefix="logic" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-tiles" prefix="tiles" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-template" prefix="template" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-nested" prefix="nested" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html:html locale="true">
<head>
<html:base />
<title>validateaddress.jsp</title>
<meta http-equiv="pragma" content="no-cache">
<meta http-equiv="cache-control" content="no-cache">
<meta http-equiv="expires" content="0">
<meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
<meta http-equiv="description" content="This is my page">
</head>
<body bgcolor=#fdffca>
<html:form action="/address" method="post" onsubmit="return validateAddressForm(this);">
<p>
<html:errors/><p>
name : <html:text property="name" size="30" maxlength="30" />
address : <html:text property="address" size="30" maxlength="30" />
emailaddress : <html:text property="email" size="30" maxlength="30" />
<html:submit>Submit</html:submit>
<html:cancel>Cancel</html:cancel>

<html:javascript formName="AddressForm"/>

          </html:form>
     </body>
</html:html>
AddressForm.java
//Created by MyEclipse Struts
// XSL source (default): platform:/plugin/com.genuitec.eclipse.cross.easystruts.eclipse_3.9.210/xslt/JavaClass.xsl
package com.projectvalidator.form;
import org.apache.struts.validator.ValidatorForm;
* MyEclipse Struts
* Creation date: 02-23-2006
* XDoclet definition:
* @struts:form name="AddressForm"
public class AddressForm extends ValidatorForm {
     // --------------------------------------------------------- Instance Variables
     /** address property */
     private String address;
     /** emailaddress property */
     private String email;
     /** name property */
     private String name;
     // --------------------------------------------------------- Methods
     * Returns the address.
     * @return String
     public String getAddress() {
          return address;
     * Set the address.
     * @param address The address to set
     public void setAddress(String address) {
          this.address = address;
     * Returns the emailaddress.
     * @return String
     public String getEmail() {
          return email;
     * Set the emailaddress.
     * @param emailaddress The emailaddress to set
     public void setEmail(String email) {
          this.email = email;
     * Returns the name.
     * @return String
     public String getName() {
          return name;
     * Set the name.
     * @param name The name to set
     public void setName(String name) {
          this.name = name;
AddressAction.java
//Created by MyEclipse Struts
// XSL source (default): platform:/plugin/com.genuitec.eclipse.cross.easystruts.eclipse_3.9.210/xslt/JavaClass.xsl
package com.projectvalidator.action;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import com.projectvalidator.form.AddressForm;
* MyEclipse Struts
* Creation date: 02-23-2006
* XDoclet definition:
* @struts:action path="/address" name="AddressForm" input="/validateaddress.jsp" scope="request" validate="true"
* @struts:action-forward name="success" path="success.jsp" redirect="true"
* @struts:action-forward name="failure" path="validateaddress.jsp" redirect="true"
public class AddressAction extends Action {
     // --------------------------------------------------------- Instance Variables
     // --------------------------------------------------------- Methods
     * Method execute
     * @param mapping
     * @param form
     * @param request
     * @param response
     * @return ActionForward
     public ActionForward execute(
          ActionMapping mapping,
          ActionForm form,
          HttpServletRequest request,
          HttpServletResponse response) {
          AddressForm AddressForm = (AddressForm) form;
          // TODO Auto-generated method stub
          //String forward="";
          //if (AddressForm.getName().equalsIgnoreCase("admin"));
          //return mapping.findForward(forward);
          return null;
==========================================
PLZ REPLY ME ANYONE , I AM NOT GETTING OUTPUT , i am using jboss application server, i am getting a pop-up window as below:
null is required
null is required
null is required
i hope any one replies me

Hi,
i have created struts project and foll code is written as foll :
plz find out error in code :
struts-config.xml code
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<data-sources />
<form-beans >
<form-bean name="AddressForm" type="com.projectvalidator.form.AddressForm" />
</form-beans>
<global-exceptions />
<global-forwards />
<action-mappings >
<action
input="/validateaddress.jsp"
name="AddressForm"
path="/address"
scope="request"
validate="true"
type="com.projectvalidator.action.AddressAction">
<forward name="success" path="/success.jsp"/>
<forward name="failure" path="/validateaddress.jsp"/>
</action>
</action-mappings>
<message-resources parameter="MessageResources" />

<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames" value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
MessageResources.properties file code
AddressForm.name=Name
AddressForm.address=Address
AddressForm.email=EmailAddress
validation.xml
<?xml version="1.0" encoding="UTF-8"?>
<form-validation>
<formset>

<form name="AddressForm">
<field property="name"
depends="required" >
<arg key="AddressForm.name"/>
</field>
<field property="address"
depends="required" >
<arg key="AddressForm.address"/>
</field>
<field property="email"
depends="required" >
<arg key="AddressForm.email"/>
</field>
</form>
</formset>
</form-validation>
validationaddress.jsp
<%@ page language="java" pageEncoding="UTF-8"%>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-bean" prefix="bean" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-html" prefix="html" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-logic" prefix="logic" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-tiles" prefix="tiles" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-template" prefix="template" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-nested" prefix="nested" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html:html locale="true">
<head>
<html:base />
<title>validateaddress.jsp</title>
<meta http-equiv="pragma" content="no-cache">
<meta http-equiv="cache-control" content="no-cache">
<meta http-equiv="expires" content="0">
<meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
<meta http-equiv="description" content="This is my page">
</head>
<body bgcolor=#fdffca>
<html:form action="/address" method="post" onsubmit="return validateAddressForm(this);">
<p>
<html:errors/><p>
name : <html:text property="name" size="30" maxlength="30" />
address : <html:text property="address" size="30" maxlength="30" />
emailaddress : <html:text property="email" size="30" maxlength="30" />
<html:submit>Submit</html:submit>
<html:cancel>Cancel</html:cancel>

<html:javascript formName="AddressForm"/>

          </html:form>
     </body>
</html:html>
AddressForm.java
//Created by MyEclipse Struts
// XSL source (default): platform:/plugin/com.genuitec.eclipse.cross.easystruts.eclipse_3.9.210/xslt/JavaClass.xsl
package com.projectvalidator.form;
import org.apache.struts.validator.ValidatorForm;
* MyEclipse Struts
* Creation date: 02-23-2006
* XDoclet definition:
* @struts:form name="AddressForm"
public class AddressForm extends ValidatorForm {
     // --------------------------------------------------------- Instance Variables
     /** address property */
     private String address;
     /** emailaddress property */
     private String email;
     /** name property */
     private String name;
     // --------------------------------------------------------- Methods
     * Returns the address.
     * @return String
     public String getAddress() {
          return address;
     * Set the address.
     * @param address The address to set
     public void setAddress(String address) {
          this.address = address;
     * Returns the emailaddress.
     * @return String
     public String getEmail() {
          return email;
     * Set the emailaddress.
     * @param emailaddress The emailaddress to set
     public void setEmail(String email) {
          this.email = email;
     * Returns the name.
     * @return String
     public String getName() {
          return name;
     * Set the name.
     * @param name The name to set
     public void setName(String name) {
          this.name = name;
AddressAction.java
//Created by MyEclipse Struts
// XSL source (default): platform:/plugin/com.genuitec.eclipse.cross.easystruts.eclipse_3.9.210/xslt/JavaClass.xsl
package com.projectvalidator.action;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import com.projectvalidator.form.AddressForm;
* MyEclipse Struts
* Creation date: 02-23-2006
* XDoclet definition:
* @struts:action path="/address" name="AddressForm" input="/validateaddress.jsp" scope="request" validate="true"
* @struts:action-forward name="success" path="success.jsp" redirect="true"
* @struts:action-forward name="failure" path="validateaddress.jsp" redirect="true"
public class AddressAction extends Action {
     // --------------------------------------------------------- Instance Variables
     // --------------------------------------------------------- Methods
     * Method execute
     * @param mapping
     * @param form
     * @param request
     * @param response
     * @return ActionForward
     public ActionForward execute(
          ActionMapping mapping,
          ActionForm form,
          HttpServletRequest request,
          HttpServletResponse response) {
          AddressForm AddressForm = (AddressForm) form;
          // TODO Auto-generated method stub
          //String forward="";
          //if (AddressForm.getName().equalsIgnoreCase("admin"));
          //return mapping.findForward(forward);
          return null;
==========================================
PLZ REPLY ME ANYONE , I AM NOT GETTING OUTPUT , i am using jboss application server, i am getting a pop-up window as below:
null is required
null is required
null is required
i hope any one replies me

Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.

Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

Maximum number of wired guest clients ??

Does anybody knows which is the maximum number of simultaneous wired guest clients on a 5508? And in a 2112 controller?
Wired clients count as wireless clients??
What about anchoring limitations, what is the effect of wired guest clients on the anchor controller?

2100 series WLC do not support Wired Guest Access.. 5500 wlc supports.. and i guess 5508 WLC can support max 150 simultaneous logins..
Lemme know if this naswered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Wired guest access on WLC 4400 with SW 7.0.240.0

Hello,
after we upgrade our Wlan-controller 4400 from software 7.0.116.0 to 7.0.240.0
wired guest access don't work anymore.
All other things works fine, incl. WLAN guest access!
When we try wired guest access, we get the web-authentication page and can log in.
On the controller we can see that the Policy Manager State changes from WEBAUTH_REQD
to RUN.
But then there is no access to the internet.
We tried also SW 7.0.250.0, same problem!
Log Analysis on the WCS:
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :The WLAN to which client is connecting does not require 802 1x authentication.
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client does not have an IP address yet.
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L3 authentication is required
Time :03/12/2014 14:21:23 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role update request. from Unassociated to Local Peer = 0.0.0.0, Old Anchor = 0.0.0.0, New Anchor = 10.101.200.11
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Mobility role changed. State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :DHCP successful.
Time :03/12/2014 14:21:26 MEZ Severity :ERROR Controller IP :10.101.200.11 Message :Client got an IP address successfully and the WLAN requires Web Auth or Web Auth pass through.
Time :03/12/2014 14:21:26 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client IP address is assigned.
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Webauth user logged in to the network. manni
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :AAA response message sent.
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
Time :03/12/2014 14:22:01 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client has completed Web Auth successfully.
Trying http://www.google.de .... doesnt work. No Log Entries. Next entries while logging out.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Web auth is being triggered again.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client L2 authentication has been completed successfully.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :Client Moved to DHCP Required State.
Time :03/12/2014 14:36:20 MEZ Severity :INFO Controller IP :10.101.200.11 Message :WebAuth user Logged out from network.
Has someone a idea how to solve this problem?
Regards
Manfred

Hi
Yes got it resolved. It turns out that the connection from the wired guest access port to the WLC must be L2. That is the switch that the wired guest acces sport is connected and WLC are connected to must be L2 only. We were using a single switch to do the testing and it was also doing the routing for the test LAN. Even though there was no L3 VLAN interface configured for the VLAN that the guest access port was on for some reason this breaks it. Absolu Didnt have chance to work out the exact limitations of this as we simply made the switch L2 only and configured an 802.1Q trunk to the Internet router and made subinterfaces on the router for the wired and wireless egress ports and it worked then. No config change was needed on the WLC at all.
The only thing I can think of is that it's something about the way the WLC joins the wired guest access ingress VLAn and egress VLAN. The WLC isn't a reall router it says so in the documentation. I think the packet coming from the wired access port is being bridged to the egress VLAn not routed and this is what screws it up (remeber with a router the source and destination MAC addresses would be changed with a bridge they aren't). Got to be something along those lines. If you have a bigger newtork with a guest anchor WLC handling this function you dont run into this as the traffic is coming over an EOIP tunnle from the remote WLC so the switch with the guest anchor WLC doesnt see the MAC address of the wired guest PC.

Wired guest access - Unable to access network

Hello,
I've configured two WLC's with the exact same config one of them has working Wired guest network the other one does not.
The only difference in the two I know of is that the one that does not work is connected to a Cisco 3550 switch, the one that works is connected to a Cisco 7600.
The problem is when I connect a computer to the wired guest network I am able to get an IP address from the Internal DHCP server but unable to access the network.
I've tried pinging the gateway's IP and I get no answer.
The Port-channel interface has the correct VLans and the vlans exist on all switches.
If anyone see an error there or might have an idea why this is not working I would appreciate the feedback.
Config follows below..
regards,
Gk

(Cisco Controller) >show running-config
802.11a cac voice tspec-inactivity-timeout ignore
802.11a cac voice stream-size 84000 max-streams 2
802.11b cac voice tspec-inactivity-timeout ignore
802.11b cac voice stream-size 84000 max-streams 2
location rssi-half-life tags 0
location rssi-half-life client 0
location rssi-half-life rogue-aps 0
location expiry tags 5
location expiry client 5
location expiry calibrating-client 5
location expiry rogue-aps 5
Cisco Public Safety is not allowed to set in thisdomain
ap syslog host global 255.255.255.255
auth-list ap-policy ssc enable
custom-web ext-webserver add 1 217.28.176.114
dhcp create-scope guestnetwork
dhcp address-pool guestnetwork 192.168.34.2 192.168.34.200
dhcp default-router guestnetwork 192.168.34.254
dhcp enable guestnetwork
dhcp dns-servers guestnetwork 212.30.200.200 212.30.200.199
dhcp network guestnetwork 192.168.34.0 255.255.255.0
local-auth method fast server-key *****
interface create guestnetwork 331
interface create guestnetwork-wired 332
interface address ap-manager 10.255.255.90 255.255.255.248 10.255.255.94
interface address dynamic-interface guestnetwork 192.168.34.1 255.255.255.0 192.168.34.254
interface address dynamic-interface guestnetwork-wired 192.168.35.1 255.255.255.0 192.168.35.254
interface address management 10.255.255.89 255.255.255.248 10.255.255.94
interface address service-port 10.60.4.200 255.255.255.0
interface address virtual 1.1.1.1
interface dhcp ap-manager primary 10.255.255.89
interface dhcp dynamic-interface guestnetwork primary 10.255.255.89
interface dhcp management primary 10.255.255.89
interface dhcp service-port disable
interface vlan ap-manager 226
interface vlan guestnetwork 331
interface vlan guestnetwork-wired 332
interface vlan management 226
interface port ap-manager 29
interface port guestnetwork 29
interface port guestnetwork-wired 29
interface port management 29
lag enable
load-balancing window 5
mesh security eap
mgmtuser add root **** read-write
mobility group domain XXXXXXX
mobility symmetric-tunneling enable
network otap-mode disable
network rf-network-name XXXXXXX
radius acct add 1 XXXXXXX 1813 ascii ****
radius auth add 1 XXXXXXX 1812 ascii ****
radius auth management 1 disable
spanningtree port mode off 1
spanningtree port mode off 2
sysname XXXXXXX
time ntp interval 3600
time ntp server 1 XXXXXXX
wlan create 1 hotspot hotspot
guest-lan create 1 hotspot-wired
wlan interface 1 guestnetwork
guest-lan interface 1 guestnetwork
wlan custom-web webauth-type external 1
wlan custom-web ext-webauth-url https://XXXXXXX
wlan session-timeout 1 disable
wlan wmm allow 1
wlan wmm allow 18
wlan security wpa disable 1
wlan security wpa disable 18
wlan radius_server auth add 1 1
wlan radius_server acct add 1 1
guest-lan radius_server auth add 1 1
guest-lan radius_server acct add 1 1
wlan dhcp_server 1 0.0.0.0 required required
wlan enable 1
guest-lan enable 1

Ask the Experts: Wired Guest Access

Sharath K.P.
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions on wired guest access with expert Sharath K.P. Wired guest access enables guest users to connect to the guest access network from a wired Ethernet connection designated and configured for guest access. Sharath K.P. is a Customer Support Engineer specialized in wireless and switching technologies at the Technical Assistance Center in Cisco Bangalore. He has been troubleshooting wireless and switching networks and management tools since 2009. Sharath has a bachelor's degree in Electrical Electronics Engineering from P.E.S College of Engineering (PESCE), VTU at Belgaum. India. He holds CCNP certifications in R&S and Wireless.
Remember to use the rating system to let Sharath know if you have received an adequate response.
Sharath might not be able to answer each question due to the volume expected during this event.
Remember that you can continue the conversation on the Wireless and Mobility sub-community discussion forum shortly after the event. This event lasts
through January 27, 2012. Visit this forum often to view responses to your questions and the questions
of other community members.

Hi Daniel ,
Wonderful observation and great question .
Yes, we dont find any recommendation or inputs in Cisco Docs on scenarios where we have multiple foriegn WLC's present .When we go through the Cisco Doc available for Wired Guest Access
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808ed026.shtml
Two separate solutions are available to the customers:
A single WLAN controller (VLAN Translation mode) - the access switch trunks the wired guest traffic in the guest VLAN to the WLAN controller that provides the wired guest access solution. This controller carries out the VLAN translation from the ingress wired guest VLAN to the egress VLAN.
Two WLAN controllers (Auto Anchor mode) - the access switch trunks the wired guest traffic to a local WLAN controller (the controller nearest to the access switch). This local WLAN controller anchors the client onto a DMZ Anchor WLAN controller that is configured for wired and wireless guest access. After a successful handoff of the client to the DMZ anchor controller, the DHCP IP address assignment, authentication of the client, etc. are handled in the DMZ WLC. After it completes the authentication, the client is allowed to send/receive traffic.
So as per Cisco best pratices using multiple foreign controllers for the same wired guest VLAN is not supported and the results will be unpredictable
I do understand the confusion regarding such scenario's as this( Multiple foriegn WLC's) is a very general setup which customer would like to deploy .
We have already opened a bug for the same (Little late though )
BUG ID :CSCtw44999
The WLC Config Guide should clarify our support for redundancy options for wired guest
Symptom:
Do not trunk a wired guest VLAN to multiple foreign controllers. This is not supported, and will
generate unpredictable results.
Some of the other tthat changes we will be making as a part of doc correction would be
http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_user_accts.html#wp1066125
1. The WiSM2 needs to be added as a supported controller. (Not sure about the 7500, check with PM)
2. Where it says "Do not attempt to trunk a guest VLAN on the Catalyst 3750G ...", this should read:
"Do not trunk a wired guest VLAN to multiple foreign controllers. This is not supported, and will
generate unpredictable results."
3. Add at least a line mentioning support for multiple anchors for a guest wired LAN.
Now if you already have such deployments , ther criteria would be that nearest WLC on the broadcast domain (Layer 2) would respond to the client associtation request .
Cisco Controller) >Tue Sep 11 13:27:42 2007: 00:0d:60:5e:ca:62 Adding mobile on Wired Guest 00:00:00:00:00:00(0)
Tue Sep 11 13:27:42 2007: 00:0d:60:5e:ca:62 apfHandleWiredGuestMobileStation (apf_wired_guest.c:121) Changing state for mobile
00:0d:60:5e:ca:62 on AP 00:00:00: 00:00:00 from Idle to Associated .
I hope the above explanation could clarify your doubts to certain extent and also keep you
informed on Cisco's roadmap on this feature .
Regards ,
Sharath K.P.

Wired Guest in 5.x 4402 - Does it Work???

Anyone get Wired Guest access working using the latest code 5.148 (or any code for that matter). In particular has anyone been sucessful using 1 WLC with ingress and egress on same controller. I have been trying for a week and does not work no matter what.
Thanks for all responses....

Armonk-
See next post with attached .doc
This post was trimmed.
4402 config
-Ingress int
Create a new interface <. myguests-ingress> assign it a VLAN ID <44>
Check the box that says Guest LAN
This interface has no IP, it is Layer2 only!
If there is an IP associated with this VLAN (anywhere), create another VLAN.
-Egress int (if you are already using one for wireless guest access, you can skip this step and reuse that one, I did!) It will not be called âEgressâ on the wireless, just interface. If you don't have one already, you need to create it
Create a new interface , assign it a different VLAN <55> than your ingress interface
Assign IP, netmask, and gateway info < 192.168.100.10, 255.255.255.0, 192.168.100.1 > (see Router section below)
I used addresses that were NOT on my business network, so guest IPs are easily distinguished from employees
Also since this traffic is within a VLAN, I need to route this traffic at some point to access my gateway
If you want to give guests DHCP addresses, assign a Primary DHCP Server to this interface (see DHCP section below)
Since I was using the WLC for DHCP, I put the IP of my management interface (or another of your choice)
-Internal DHCP (if you are using your WLC for DHCP this needs to be configured)
Start <192.168.100.100 > (same subnet as "egress")
End <192.168.100.200>
Network <192.168.100.0>
Mask <255.255.255.0>
Lease <86400>
Default router <192.168.100.1> (same as your gateway above)
This is really just an IP to route between VLANs, it may not exist yet
Don't worry if this is on another subnet as your real gateway (it should be), this is just a gateway IP for this subnet
You can route between VLANs (that's what I did) on your router
DNS server <10.10.10.50> (this a local DNS, but you could use anything I guess, even your ISPs DNS server)
Status = Enabled
-WLAN
Create a new WLAN, select Guest LAN as the type
Ingress is a L2 VLAN
Egress is a L3 VLAN or previously configured VLAN
Security Tab, select Web Auth/Pass
Advanced Tab, specify your DHCP
Check override (required for external DHCP)
Was not able to check DHCP Addr. Assignment = Required (bug?)
General Tab, check status = Enabled
Ignore the error; this is a bug!
Core Switch configuration (these commands are in CatOS)
Since wired guest access uses the same interface (in my config,) I did not have to do this step as it was done previously.
You need to configure your core switch to allow VLAN traffic from your WLC interfaces
VTP and VTP domain were previously configured; you may need to do this if you have never done VLANs on this switch
# set vlan 44 name MYGUESTS-INBOUND - - - IOS will be different
# set vlan 55 name MYGUESTS-OUTBOUND - - - IOS will be different
If you already have a vlan for wireless guests this step is already done
Setup trunking on the port coming from the WLC to your switch (I chose mod/port =3/5, yours will be different)
# set trunk 3/5 on dot1q - - - IOS will be different
This allows VLANs to traverse from the WLC to the switch, (you could specify which VLANs only)
I have created VLAN ACLs that restrict the access of guests, but that can be done after this is up and working
Now this next step was required for my environment, but I am not sure that all setups can be done like this. I have another DHCP server on my network, so I wanted to make sure that there was not a conflict. To do this I specified a port on my core switch to accept VLAN traffic for my ingress interface
Configure a port on my core switch to accept wired guest traffic (I chose mod/port =3/6, yours will be different)
# set vlan 44 3/6 - - - IOS will be different
It's possible you may also need to allow your egress VLAN depending on your setup
Dumb switch
Plug switch into the port specified

ISE with CWA and wired guest access via WLC Anchor

Can an Anchor WLC (WLCa) provide a wired guest LAN service if the wlan guest access is using CWA?
We are deploying a WLAN only ISE solution (it is a full license ISE though) but they just want a few wired guest ports. I was hoping to add L2 switch to the DMZ where the WLCa is and that the L2 switch wouldnt need any other config as the WLCa just bridges the wired to the wlan vlan. This Im sure i have done before.
So now I have set wiredguest the same as i have done before ISE and my wired clients get an IP address, but when they redirect, the URL they get is different, and the redirect just doesnt work.
It comes out as:
https://my_ise_ip:8443/guestportal/Login.action?switch_url=https://my_ise_host/login.html&wlan=my_wired_guest_lan&redirect=www.google.co.uk
So does my simple L2 only switch need an ISE config on it or should the WLCa be handling or the redirection just as it would for a wlan device.

The ISE never receives an auth entry, so i dont believe the redirect is working for the wired client. So even though the clients browser gets a redirect url which fails connection, the client info in the WLCa doesnt have a redirect ACL listed like a wlan client would

Wired guest access with 5508

Hi
I have setup wireless guest access for a customer with a single 5508 and web authentication no problem at all. He then wanted to test wired guest access. The 5508 is currently connected to a single 3560 switch. The wired clients get a DHCP address OK but cannot reslove DNS and thus don't get redirected to teh guest login portal. I have even tried turning of all L3 security to no avail. The setup is as follows
VLAN 101 access points and 5508 management interface
VLAN 102 wired guest access dynamic ingress (L2 config only no SVI on 3560)
VLAN 103 wireless guest dynamic egress nterface L3 network with SVI on switch
VLAN 104 wired guest dynamic egress interface L3 network with SVI on switch
There are two DHCP pools setup on the WLC one for the VLAN 103 and one for the VLAN 104 subnets.
The internet router is also connected to the 3560 on a sepearte VLAN with an SVI. the 3560 has a default route to teh internet router and teh DHCP pools give the DHCP clients a default gateway of the IP address of dynamic interface 103 or 104. The Internet routre can ping the WLC on both these addresses.
LAG is enabled on teh WLC and VLANs 101-104 are trunked to it from the 3560.
I even tried making the wired guest egress interface the same one as for wireless. The wired clientys now got an IP address on the wireless range but still couldnt pass any traffic. It's like the intrenal bridging on teh WLC between VALN 102 and 104 (or 103) is broken. Tried both the lates 6.x and 7.x software on the WLC. Any ideas ? All the problems I can find with this seem to relate to not gettingas far as a DHCP address but that works fine.
Thanks
Pat

Hi
Yes got it resolved. It turns out that the connection from the wired guest access port to the WLC must be L2. That is the switch that the wired guest acces sport is connected and WLC are connected to must be L2 only. We were using a single switch to do the testing and it was also doing the routing for the test LAN. Even though there was no L3 VLAN interface configured for the VLAN that the guest access port was on for some reason this breaks it. Absolu Didnt have chance to work out the exact limitations of this as we simply made the switch L2 only and configured an 802.1Q trunk to the Internet router and made subinterfaces on the router for the wired and wireless egress ports and it worked then. No config change was needed on the WLC at all.
The only thing I can think of is that it's something about the way the WLC joins the wired guest access ingress VLAn and egress VLAN. The WLC isn't a reall router it says so in the documentation. I think the packet coming from the wired access port is being bridged to the egress VLAn not routed and this is what screws it up (remeber with a router the source and destination MAC addresses would be changed with a bridge they aren't). Got to be something along those lines. If you have a bigger newtork with a guest anchor WLC handling this function you dont run into this as the traffic is coming over an EOIP tunnle from the remote WLC so the switch with the guest anchor WLC doesnt see the MAC address of the wired guest PC.

Anyone seen strange behavior with wired guest access on WLAN Controller?

Cisco Doc ID 99470 spells out how to deploy wired guest access over wireless LAN Controllers.
That said, everything has been up and working for almost a year. Guest wireless uses anchor controller in DMZ - no issues.
Recently configured two wired ports for wired guest networking. The desktops get the correct IP address via DHCP. A wireless client (on the table right next to the wired clients) on the guest wireless gets an IP address as expected as well.
Open a continuous ping to the gateway 172.16.16.1 on all three machines.
The two desktops will ping for a few minutes and then stop for 30 seconds or longer. Wireless client will keep its connection. (you might think it would be the other way around)
I understand there is a 65,535 second inactivity timeout, but I am only sitting here for minutes, not 18 hours when this happens.
On the wired desktops, you have to bring up a browser and log back in just as you do on a wireless client ever few minutes. After debugging the client, I found a "failed to find scb" message in the output.
The other trick here is that the wired clients are miles away from where I can actually get on the CLI of the controller. This makes it difficult to run a debug and bring up a browser since I am not local to the machines when running debugs.
Has anyone ever see this behavior? Has anyone see the "failed to find scb" message?
Thanks in advance!
Succ
essfully plumbed mobile rule (ACL ID 255)
*pemReceiveTask: Dec 30 11:33:15.735: 00:25:b3:ce:cb:ef 0.0.0.0 tokenID = 5
*pemReceiveTask: Dec 30 11:33:15.735: 00:25:b3:ce:cb:ef Set bi-dir guest tunn
el for 00:25:b3:ce:cb:ef as in Export Foreign role
*pemReceiveTask: Dec 30 11:33:15.735: 00:25:b3:ce:cb:ef 0.0.0.0 Added NPU ent
ry of type 1, dtlFlags 0x4
*spamReceiveTask: Dec 30 11:34:54.569: CCKM: Send CCKM cache entry
FP08:(33207772)[cmdSendNodeInfo:3787]failed to find scb 0023.2422.c6eb
*mmListen: Dec 30 11:35:58.539: 00:25:b3:ce:cb:ef Scheduling deletion of Mobi
le Station: (callerId: 73) in 1 seconds
*mmListen: Dec 30 11:35:59.471: 00:25:b3:ce:cb:ef Scheduling deletion of Mobi

I found it in the document
B.1 How Logout Works
The WebGate logs a user out when it receives a URL containing "logout." (including the "."), with the exceptions of logout.gif and logout.jpg, for example, logout.html or logout.pl. When the WebGate receives a URL with this string, the value of the ObSSOCookie is set to "logout."
The Access System sets an obSSOCookie for each user or application that accesses a resource protected by a WebGate. The obSSOCookie enables users to access resources that are protected by the Access System that have the same or a lower authentication level. Removing the ObSSOcookie causes the WebGate to log the user out and requires the user to re-authenticate the next time he or she requests a resource that is protected by the Access System.
Well, I havn't got that far in the document:)
Thanks a lot for your help.
-Wei

Getting error"Broker Client is no longer connected to the Broker Host"

HI Guruu2019s,
I'm trying to featch Data from SAP using IDOCs in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also I start my Real-time service, it is showing green symble -" Weating for Idocs "
when start Idoc process from SAP system ,I'm getting below Error-
*"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
I'm doing wait for your response.
Thanks & Regards,
Rajeev kumar
SAP-BODS Developer

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
Thank you in advance,
Michael

Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

ERROR: transport error 202: bind failed: Address already in use

Hey guys,
I created 2 WL 10.3 Domains. I can start the admin server in domain but when I start the second admin server i get the following error:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
./../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
RROR_TRANSPORT_INIT(197)
Starting WLS with line:
C:\bea\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -XX:Com
pileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -XX:MaxPermSize=160m
-Xverify:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:
javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.
sbconsole... -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\serv
er -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=tru
e -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true
-Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classp
ath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch
cie670\profiles\default\sysextmanifest_classpath;C:\bea\patch_alsb1031\profile
s\default\sysext_manifest_classpath -Dweblogic.Name=TestAdmin2 -Djava.security.p
olicy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
./../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
RROR_TRANSPORT_INIT(197)
Stopping PointBase server...
I changed the port address of both admins but I dont' think that's the issue. Can someone tell me whats going on.
Thanks

Hi
Iam getting the Same Error , Can you provide me some information on what changes did you made to the setDomainEnv.cmd file to make this work
thanks in advance

"Out of the box" or "out of my mind"? (Wired Guest from 4.1 to 5.X)

As we all know and love, the 1000 Series Access Points are no longer supported past 4.2. And I haven't quite heard the fate of the 1510 Mesh AP's either. However, I hate for this to prevent me from going to 5.X when the time comes right. Since I use Anchoring for Guest Access, and you are not supposed to anchor between 4.1 and 5.x I've come up with a "plan".
I'll leave all my 1000 Series and Mesh AP's on a 4.1 Mesh Controller and instead of anchoring the GUEST SSIDs to my DMZ Controller, I'm going to dump the WLAN to a Layer2 VLAN. On another controller at 5.x, I'm going to pick up this VLAN as a "Wired Guest". And then, I'm going to Anchor this to my DMZ Controller just like I do my Wireless Guest SSIDs.
In theory, any "Guest" users on the Mesh controller will dump on to the Wire in a VLAN that isn't routed, be picked up on the 5.x controller, be anchored to the DMZ controller, and dumped in to the DMZ like all other Wireless Guest Users.
I was waiting for 5.2 before I did it, but what do you think?

I'm trying to get asimilar solution working: I have some autonomous AP350s which I'm not allowed to get rid of, and am trying to bring guest traffic from those APs in through my controller system as wired guests.
Haven't gotten it working yet - clients are not receiving DHCP offers (although the offers are making it back to the controller from the DHCP server). Will post resolution if/when I have one.

Wired guest config error: Learn Client IP Address

Similar Messages

Maybe you are looking for