Wired problem in IP Security and UNC
In active directory I create two organization units, one of them has IPSec enabled to all computers and other not. in IPSec settings for first OU, create rule permit access the computers in second OU.
I can ping computers in first OU using Computer in second OU.
I can see Shared files in computers belong to Second OU using computers in First OU.
problem is I can't access any UNC path from first OU (IPSec enabled) in second OU. computers in second OU can reach themselves UNC paths.
M.Alizadeh
Hi,
>>problem is I can't access any UNC path from first OU (IPSec enabled) in second OU. computers in second OU can reach themselves UNC paths.
Before going further, what IPsec policy settings have we configured? What's the message when we can't use UNC path to access the shares on the computers in the second OU? Besides, you can also check event logs in Event Viewer to see if some related event
messages were logged.
Best regards,
Frank Shen
Hi,
the error code is 0x80070035 and error message is "The Netowrk Pah was not found.".
in my scenario users without joining the company domain couldn't access the Domain Network except computers is in my Second OU. but computers that join to Domain and get IPSec Policy just can ping the computers in Second OU and couldn't access to there share
folders.
M.Alizadeh
Similar Messages
-
Problem with ws-security and MTOM
Hi all,
I have seriuos problem with WS-Swcurity and MTOM. When I anebled WS-Swcusriy on WSDl, MTOM messagies have all attachments inline, not as a part of message. Here my WSDL definition:
<wsp:Policy wsu:Id="WSMTOMPolicy">
<wsp:ExactlyOne>
<wsp:All>
<wsoma:OptimizedMimeSerialization
xmlns:wsoma="http://schemas.xmlsoap.org/ws/2004/09/policy/optimizedmimeserialization" />
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsp:Policy name="UsernameToken" wsu:Id="WSSecurityPolicy">
<sp:SupportingTokens>
<wsp:Policy>
<sp:UsernameToken
sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">
<wsp:Policy>
<sp:WssUsernameToken11 />
</wsp:Policy>
</sp:UsernameToken>
</wsp:Policy>
</sp:SupportingTokens>
</wsp:Policy>
Does anybody advise for me, some solution of this problem?
Martin@Lovin_JV_941794
The welcome page is public available since it does not have appropriate PageDef file.
Login page comes not from the welcome page, it comes after attempt to access the test page. So after the login succeeded the test page appears, because redirect to welcome page after successful login is not configured. I do not need to return the welcome page at this moment, I need to go to the test page.
It seems the task flow call stack to be destroyed after redirect to login page.
Edited by: user13307311 on Apr 17, 2013 12:45 AM -
Problem with ADF security and task flow calls
Hi.
I am using JDeveloper 11.1.2.0.0.
I encountered a problem when tried to apply ADF security to my application.
The way to reproduce the problem:
1. Create new Fusion Web Application;
2. Import Business Components from Tables from any existing schema and add at least one table to the ApplicationModule.
3. Create "welcome page" (for instance, welcome.jsf). Add a button with fixed action outcome "test".
4. Create test page, for instance, test.jsf. Drag and drop any view object from Data Controls onto the page and create a form with navigation controls. Add a button with fixed action outcome "return".
5. Create bounded task flow, name it "test", drag and drop our test page on it - the page will be the default activity. Add a task flow return activity. Add a control flow case from the default view activity to the return activity, set From Outcome property to "return". So our return button should cause the task flow to exit.
6. Open adfc-config.xml in diagram mode and place our welcome page on it. Then drag and drop the test task flow to create a task flow call activity. Add a control flow case from welcome page to task flow call activity, set the From Outcome property to "test". So our test button should call the test task flow.
7. Configure application to run the unbounded task flow starting with Welcome view activity.
At this point all works as expected: when application runs, the welcome page is displayed with test button. Pressing the test button results in displaying the test page, return button leads back to the welcome page.
Now let's configure ADF Security.
Run the ADF Security configuration wizard, choose ADF Authentication and Authorization.
On the second page select Form-Based Authentication, check the Generate Default Pages flag.
On the third page choose No Automatic Grants.
On the next page keep the Redirect Upon Successful Authentication unchecked. Press Finish.
Open jazn-data.xml to configure roles, users and resource grants:
1. Create application role test-role.
2. Grant the test-role privileges to view the test task flow.
3. Create user and grant him the test-role.
Now we have the public available welcome page and the test page with restricted access.
When application runs, the welcome page is displayed as expected. Pressing the test button redirect us to auto-generated login page. After successful authorization the test page is displayed. But nothing happens if we click now the return button for the first time. When we click the return button once more, the application crushes with Error-500 and message "Target Unreachable, identifier 'bindings' resolved to null". The exact error trace depends on UI control bindings, but looks like this:
javax.el.PropertyNotFoundException: //C:/Users/DUDKIN/AppData/Roaming/JDeveloper/system11.1.2.0.38.60.17/o.j2ee/drs/Test1/ViewControllerWebApp.war/test.jsf @10,120 value="#{bindings.Id.inputValue}": Target Unreachable, identifier 'bindings' resolved to null
at com.sun.faces.facelets.el.TagValueExpression.isReadOnly(TagValueExpression.java:122)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:476)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:390)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.wasSubmitted(EditableValueRenderer.java:345)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.decodeInternal(EditableValueRenderer.java:116)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.decodeInternal(LabeledInputRenderer.java:56)
at oracle.adf.view.rich.render.RichRenderer.decode(RichRenderer.java:342)
at org.apache.myfaces.trinidad.render.CoreRenderer.decode(CoreRenderer.java:274)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__rendererDecode(UIXComponentBase.java:1324)
(the rest of lines skipped).
Any suggestions?
Edited by: user13307311 on Apr 16, 2013 11:39 PM@Lovin_JV_941794
The welcome page is public available since it does not have appropriate PageDef file.
Login page comes not from the welcome page, it comes after attempt to access the test page. So after the login succeeded the test page appears, because redirect to welcome page after successful login is not configured. I do not need to return the welcome page at this moment, I need to go to the test page.
It seems the task flow call stack to be destroyed after redirect to login page.
Edited by: user13307311 on Apr 17, 2013 12:45 AM -
Performance problems with Integrated security and ODP
Hi
While testing performance for opening a data base connection, I notice there is a huge performace issue when using externally identified users and ODP with Oracle client 11.1.0.6 and .Net 3.5. The test is running 30 times slower with an externally identified user compared to using a database identified user.
I also noticed that System.Data.OracleClient does not result in any significant performance penalties for externally vs database identified users.
The test environment is Vista 64 and VS2008, and I do not notice any significant difference using 32bit vs 64bit Oracle client.
Is this a known problem and does it exist a workaround for this?
Kind regards
OyvindHi,
I'm assuming you're using 11.1.6.0 ODP, so you'd want to upgrade to 11.1.6.21 or higher ODP. Prior to that, Externally Authenticated connections were not pooled so resulted in a hard connection every time.
If you have 111060 full client installed, applying the 11107 database patch to the cleint install will give you 11107 ODP. Or, you can add the [11106.20 ODAC bundle|http://www.oracle.com/technology/software/tech/windows/odpnet/index.html] into your existing 111060 full client home as well.
Hope it helps,
Greg -
your link wwww.mozilla.com/en-us/firefox/all-older does not apear to work
You can get Firefox 3.6.16 here:
http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox -
Xws-security and fault messages
Hi,
I have a problem with xws-security and fault messages.
It seems that the security policy is not applied to fault messages. This results in a "javax.xml.rpc.soap.SOAPFaultException: Message does not conform to configured policy: No Security Header found" exception whenever a fault message is thrown.
As a result I can not use any meaningful application-specific fault messages as they violate the security policy. Is this correct? Surely a fault message is a SOAP message just like any other and should have the security policy applied to it as usual, or am i missing something here?
If anyone can shed any light on this i'd really appreciate it.XWS-Security is not integrated with Sun Java Studio Enterprise. However, if you would like to implement message level security in a web service in the Java Studion Enterprise environment, you may find this article useful:
http://developers.sun.com/prodtech/javatools/jsenterprise/downloads/ea/jse8/reference/techart/security.html
Rico -
Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated! -
Now I had to restart my Ipod all over again which because of that i lost all my data. When I want to get apps I can't install them because of a billing information problems. What security code do they want on my account settings information? And how do you delete purchased apps that you install, but didn't want?
Maybe the three or four digit security code on your credit card card
http://www.creditcards.com/credit-card-news/credit-card-verification-numbers-sec urity-code-1282.php
or maybe the answers to your security questions. If you do not remember them:
From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
Hi i have i problem with my iphone and the problem is the security question i have forgot the answers
I understand German and Italian i littlebit EnglishYou need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106626) -
i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me
<Email Edited by Host>As these are public forums, you're not talking to iTunes Support, I've asked the hosts to remove your email address from your post - it's not a good idea to post it unless you like spam email.
The reset link will only show if you have a rescue email address on your account - a rescue email address is not the same as an alternate/secondary email address, they are different addresses/settings on an account.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use -
Hi i have problem in my security question email is blocked and i cant rested my security question in second emial becouse i cant see this linked
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117310) -
I have problem with the security question which i forgot the answer how can i change it as i already have apple id and password
You may reset the password on your account by opening https://iforgot.apple.com/ in Safari and entering your Apple ID (your email address, which the moderators should have removed earlier).
You won't be able to set the password to your email address, or a recently-used password (if I remember correctly).
Once you change your password, you should update your password on your iOS device in Settings > iTunes & App Store, then tapping the "Apple ID: <username>" cell at the top to re-enter your password. (Your iOS device may prompt you for the new password before getting to Settings as well.)
Hope that helps. If you have a different issue, please post a follow-up message. -
I have problem with the security questions and i dont know the answer. How i change the questions ?
See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Here > Apple Support iTunes Store Contact -
My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device. -
Hello.
I'm trying to install arch, but I've been stuck on configuring network for a day already.
The point is: I need to connect to the local university network (wired) to be able to connect to the Internet via PPPoE. The university network has PEAP MSCHAPv2 security and I can't connect to it.
I haven't found anything on the forums I hadn't tried so far, so, maybe you can help me find my mistakes.
Here's what I'm doing:
/etc/wpa_supplicant.conf:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
ap_scan=0
network={
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="username"
password="password"
eapol_flags=0
ip link set enp4s0 up
wpa_supplicant -i enp4s0 -B -Dwired -c /etc/wpa_supplicant.conf
dhcpcd enp4s0
pppoe-setup
pppoe-start
Update: I managed to advance a bit further, pppoe-start finally says
. Connected!
But now I can't seem to get DNS to work, since my provider's server won't send one to me. Apart from that, everything seems to work, so I'll just leave this here so other newbies with the same problem would have less trouble lookng for solution.
Last edited by tstheworm (2013-03-21 17:03:49)Hi Hartmut,
Suggest using CSSC with CTA.
CTA 802.1x supplicant have limitation.
CSSC is free for basic features, advanced features (support wireless) need license.
You may need to un-install CTA with 802.1x supplicant first, follow by install CSSC + CTA (without 802.1x) because CSSC have built-in 802.1x features.
Please take note of the installation sequence. Because if you make mistake about the installation sequence, you may get a error and the thing didn't work.
Hope this help
Thanks
Maybe you are looking for
-
I saved to my HD many pages from the Web containing photos and now that I look back at it, after weeks or months (and I think in some cases, just the same day) I realize that many do not have the photos. It has everything else; text, links, etc but n
-
Podcasts are not listed in Podcast menu
I resynched my iPod and all my podcast files are mixed in with the music titles. When I select the podcast menu item, none of the podcasts are displayed. However, when I select Genre on the main menu, then my podcast files can be found within several
-
Problem in sending Excel attachment on the SAI id.
Hi Experts. i am using one function module to send one alv output in Excel format to sapid. FORM SEND_MAIL TABLES T_AMS RECEIVERS_TAB. CALL FUNCTION 'Z_MAIL_ITAB_AS_XLS_ATTACHMENT' EXPORTING I_MESSAGE_TITLE = SYST-TIT
-
Exported Audio out of sync on one clip only - everything else is fine.
Hi all, I am under a deadline and really appreciate any help on this. I've been working in 30 fps, Apple Prores 422. I've been outputting various cuts of a documentary. I had no issues at all until this morning. One series of clips at the end of one
-
Strange GUI freezing TrayIcon + PopupMenu, please help
Can anybody help me ? I wrote very simple program demostrating some GUI activities (changing JPanel background color and tray icon). The problem is that my program freez when I popup tray icon menu (right click) ! :( I checked it on Windows XP and 20