802.1x wired problems

Hello.
I'm trying to install arch, but I've been stuck on configuring network for a day already.
The point is: I need to connect to the local university network (wired) to be able to connect to the Internet via PPPoE. The university network has PEAP MSCHAPv2 security and I can't connect to it.
I haven't found anything on the forums I hadn't tried so far, so, maybe you can help me find my mistakes.
Here's what I'm doing:
/etc/wpa_supplicant.conf:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
ap_scan=0
network={
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="username"
password="password"
eapol_flags=0
ip link set enp4s0 up
wpa_supplicant -i enp4s0 -B -Dwired -c /etc/wpa_supplicant.conf
dhcpcd enp4s0
pppoe-setup
pppoe-start
Update: I managed to advance a bit further, pppoe-start finally says
. Connected!
But now I can't seem to get DNS to work, since my provider's server won't send one to me. Apart from that, everything seems to work, so I'll just leave this here so other newbies with the same problem would have less trouble lookng for solution.
Last edited by tstheworm (2013-03-21 17:03:49)

Hi Hartmut,
Suggest using CSSC with CTA.
CTA 802.1x supplicant have limitation.
CSSC is free for basic features, advanced features (support wireless) need license.
You may need to un-install CTA with 802.1x supplicant first, follow by install CSSC + CTA (without 802.1x) because CSSC have built-in 802.1x features.
Please take note of the installation sequence. Because if you make mistake about the installation sequence, you may get a error and the thing didn't work.
Hope this help
Thanks

Similar Messages

Who is really doing 802.1x wired

I am creating a lab environment to test 802.1x prior to implementing it into production.
I wanted to know what is the pros and cons of this security feature at layer 2?
How does it really work behind the scenes?
The reason why i want to implement this feature/function is becuase I'm just one of two network administrators who manage well over 800 networking device (totally cisco shop) and 62 remote sites, and we struggle with the moves, adds, and changes, port vlan assignment (management), users moving there workstations, users moving there voip phones, etc. If anyone can speak on implementing 802.1x wired in a medium to large large network i will be happy to hear about the real life pros and cons

We implemented 802.1x in my previous company (similar size as yours)
You are right it can brings lot of problems.
Before we deployed management solution Cisco LMS 3.0... It really helped us with configuration, config backup, network overview, discrepancy reports, user tracking, troubleshooting (get rid of fake hubs etc..) ... It cleaned our network and saved lot of time .. I suggest to have good management solution before you move to 802.1x
We also separated devices what are not able to authenticate via 802.1x (printers, faxes) to separate VLAN
Than we started in one segment (vlan) which was most stable (no changes, no moves)...
It worked fine.. Than we smoothly moved to other vlans step by step..
The true is that it took lot of time (one of my colleagues was working only on this project for some time).. But we managed it and it works fine.. It would also asked your cisco vendor for consultancy and help
Hope that helps
M.

Systemd with wpa_supplicant 802.1X wired and dhcpcd - Need help

Hi,
At work we use 802.1X wired authentication on the network to get access. If successfully authenticated then I get 10.x.x.x network address from DHCP,
and if not successfully authenticated, I get a 172.x.x.x address from DHCP.
Now I've configured wpa_supplicant with certificates in its configuration file so that one is working fine.
What I have problems with is the startup, this is what I need in order:
* I need wpa_supplicant to start up
* wpa_supplicant needs to authenticate completely
* now dhcpcd may run and I should get 10.x.x.x address.
I've tried two (b*ttfugly) ways of solving this under systemd:
wpa_auth.service
[Unit]
Description=WPA 802.1X
Requires=sys-subsystem-net-devices-eth0.device
After=sys-subsystem-net-devices-eth0.device
[Service]
Type=simple
ExecStart=/usr/sbin//wpa_supplicant -ieth0 -Dwired -c/etc/wpa_supplicant/wpa_supplicant.conf
[Install]
Alias=multi-user.target.wants/wpa_auth.service
And in [email protected] I've added:
After=wpa_auth.service
However this won't work since wpa_supplicant isn't done authenticating when dhcpcd starts up.
I've also tried using -B option to wpa_supplicant and forking in wpa_auth.service like this:
Type=forking
ExecStart=/usr/sbin//wpa_supplicant -B -ieth0 -Dwired -c/etc/wpa_supplicant/wpa_supplicant.conf
Now if I'm lucky this works, but it's still a race condition.
So: Next things I've tried is to make the wpa_auth.service start up a script (Type=forking) that executes wpa_supplicant, and adds a sleep 1, this gives wpa_supplicant 1 second to authenticate, but its still a shitty and unsafe solution.
Last solution I tried was using the above solution but replaced sleep with wpa_cli -a script that according to man page executes the script when it recieves an event. So right now the chain looks like this:
In chronological order:
- wpa_auth.service (systemd)
Type=forking
- script
- wpa_supplicant
- wpa_cli -a script2 (will block until recieving an CONNECTED/DISCONNECTED event from wpa_supplicant, then run script2)
- script2
-pkill wpa_cli
- exit 0
done - dhcpcd may start
I just want to find a way to start dhcpcd after wpa_supplicant has authenticated so I get a correct IP address.
How do I do this in a correct way? Can I use dbus somehow to make wpa_supplicant signal that it is done authenticating?
Thanks
Last edited by dimman (2012-11-23 15:56:01)

From the sample wpa_supplicant.conf:
# scan_ssid:
# 0 = do not scan this SSID with specific Probe Request frames (default)
# 1 = scan with SSID-specific Probe Request frames (this can be used to
# find APs that do not accept broadcast SSID or use multiple SSIDs;
# this will add latency to scanning, so enable this only when needed)
So... looks like that likely isn't the solution. Of course, this is all just speculation now, until I can resolve the hardware issues or get a new laptop.

Connecting to an 802.1X wired network

Does the AirPort support connecting to a 802.1X wired network?

Try turning odd autofill since that sometimes results in entering incorrect information.

Not able to connect to DB in Redhat Linux - intermittent wired problem

Hi,
I need some help from you if possible please help me. There is a wired problem in the Linux based Oracle server.
OS: Redhat Linux 8
Database: Oracle Enterprise server 9.2
There is an intermittent wired problem.
After some time (it happen twice last Saturday and Yesterday), either from application or from SQL Plus we are not able to connect it from outside. But we are able to connect to the oracle server on Linux server.
We checked the Listener status on the server and it was UP and running.
We can ping the server from outside.
We are not able to do an FTP from inside the server or from Outside to the Linux server.
During this time the http protocol is working we can upload any file to the other sites.
We tried to shutdown the oracle server and even we tried to restart the OS itself and not able to resole this issue.
If we create a new Listener and starts the server and all blocking thing were released and now working.
Currently we are monitoring the server at ALIFs premises if it going to happen for the third time or not.
Thanks a lot
Regards
Kumar

What is the error that you get when you try to get connection ?
to check the log file is a good option: <ORACLE_HOME>/network/log/listener.log
Joel Pérez

Windows 7 802.1x (Wired) Authentication Failure when logging into Lync 2010

Hi
My company has implemented 802.1x Wired authentication, we use GPO to specify a
Wired Profile that uses a COMPUTER certificate.
We are finding that when a Windows 7 laptop comes out of sleep or hibernation, the laptop fails 802.1x authentication and does not connect to the network.
This issue only occurs intermittently, but have been proven to occur only when Lync 2010 is open. If we close Lync 2010 the issue does not occur. Lync 2010 installs a self signed USER certificate for authentication.
I am aware that there are some issues around Windows 7 not selecting the correct certificate when responding to authentication requests (KB2710995,
KB2769121) but these always specify that the issue occurs when 802.1x authentication uses USER certificates, not a mix of USER and COMPUTER. We have installed these hotfixes and the
issue still occurs.

Hi,
From the description, you suspect the DHCP request cause this issue. Would you please send us the packets? Since it seems that you have looked into the traffic and found some clues.
Meanwhile, I found the following hotfix which may related to this issue.
No response to 802.1X authentication requests after authentication fails on a computer that is running Windows 7 or Windows Server 2008 R2 http://support.microsoft.com/kb/980295/en-us
Next Action Plan:
1.Clean Boot
a. Click Start, click Run, type "msconfig" (without the quotation marks) in the Open box, and then click OK.
b. In the Startup tab, click the "Disable All" button.
c. In the Services tab, check the "Hide All Microsoft Services" checkbox, and then click the "Disable All" button.
======================================================
Clean Boot + binary search
In a Clean Boot, all the 3rd party services and startup programs are disabled. If the server can start normally in Clean Boot, we can be sure that the issue was caused by some 3rd party service or application. And then we can do a "binary search".
You can enable half of all the services in Services tab, and then restart the server to check the result. If the issue reoccurs, it means the culprit is in this list; if not, the culprit is in the other half. And then, we can continue the binary search, until
we find out the root cause. Please let me know if this action plan is OK for you.
2.Collect etl trace on the problematic client.
netsh trace start capture=yes overwrite=yes tracefile=c:\net.etl filemode=circular
****Try to reproduce this issue****
netsh trace stop
Please send the net.etl to us for underlying analysis.
For any concerns, please let us know.
Best regards,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

IAS and CTA 802.1x wired client?

Hi,
We have IAS working with 802.1X authentication. All is good except when we enable dynamic VLAN assignment we come across the Winlogon issue as per MS KB article 935638.
We do however have available the CTA 802.1X wired client. From what I have read though it requires ACS due to use of EAP-FAST. Is this correct or is there some way I can get CTA 802.1X wired client working with MS IAS RADIUS?
Thank you

You will have to use ACS for authenticating using EAP-FAST for CTA 802.1x wired clients. It is not possible to get CTA 802.1X wired client working with MS IAS RADIUS.

802.1x wired authentication via PEAP, MD5

Hi everyone,
Thank you for taking the time for reading this, I am implementing a security solution and wanted to take th benefit of implementing 802.1x over wire. I have been searching a bit but no much info from start to finish on how to implementing this solution,
i would really appreciate if someone could point me some where to find detailed instruction on how to do this, as so far i have been configuring in multiple way bit no result out of it. Still a orange port color on my switch, that means the first
hop of security work but the next no.
Thank you in advance to read this.

Hi,
According to your description, my understanding is that you want to deploy 802.1x wired authentication via PEAP, MD5 and need instructions about this.
Some articles and just for your reference:
802.1X Authenticated Wired Access Overview
https://technet.microsoft.com/en-us/library/hh831831.aspx
802.1X Authenticated Wired Access Design Guide
https://technet.microsoft.com/library/dd378864(WS.10).aspx
IEEE 802.1X Wired Authentication
https://technet.microsoft.com/en-us/magazine/2008.02.cableguy.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Openbox-svn6175 wired problem [solved]

I have a wired problem with the new openbox-svn revision.
I use pypanel and e.g i open urxvt and firefox, and will switch from firefox to urxvt I can't get urxvt in the foreground, only when I start first firefox , then urxvt, switch to firefox and then to urxvt.
I hope you understand what I mean..
Last edited by fk (2007-05-11 18:32:31)

Mikko777 wrote:So are you saying they still develop Openbox? /end sarcasm Love OB3 tho <3
Yeah, quite recently the original developer came back and started doing _a lot_ of work on ob. Quite some bugs got fixed and if you look closely, we got some nice new features... Also be prepared for a lot of fancy new stuff to come.
Edit: I kinda mean that OB seems ready and always stable so what are they doing to break things? Is obconf2 just so much different than obconf1 that it always breaks?
It is not obconf2 that breaks, it is ob that makes obconf2 break. Openbox has some libraries (for rendering themes, parsing config files, etc.) and obconf2 makes use of that and every time some api changes happen (quite often recently) obconf2 breaks.

Wired problem with LEAD Analytical function

I am having wired problem with LEAD Analytical function. It works fine as a standalone query
but when used in sub-query it is not behaving as expected (explained below). I unable to troubleshoot
the issue. Please help me.
Detail explanation and the data follows:
========================= Table & Test Data =======================================
CREATE TABLE "TESTSCHED"
(     "SEQ" NUMBER NOT NULL ENABLE,
     "EMPL_ID" NUMBER NOT NULL ENABLE,
     "SCHED_DT" DATE NOT NULL ENABLE,
     "START_DT_TM" DATE NOT NULL ENABLE,
     "END_DT_TM" DATE NOT NULL ENABLE,
     "REC_STAT" CHAR(1) NOT NULL ENABLE,
     CONSTRAINT "TESTSCHED_PK" PRIMARY KEY ("SEQ")
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (1, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (2, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 11:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (3, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (4, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:15:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (5, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:15:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (6, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (7, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (8, 39609, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 11:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (9, 118327, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (10, 120033, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('04-03-2008', 'dd-mm-yyyy'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (11, 120033, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('04-03-2008', 'dd-mm-yyyy'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (12, 120033, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (13, 120033, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (14, 126690, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 18:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 21:15:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (15, 126690, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 12:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 16:45:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (16, 126690, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 12:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 21:15:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (17, 126690, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 16:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 18:45:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (18, 126690, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 16:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 18:45:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (19, 169241, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 05:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 14:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (20, 169241, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 05:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 14:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (21, 169241, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (22, 169241, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (23, 200716, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (24, 200716, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (25, 200716, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (26, 252836, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (27, 252836, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (28, 252836, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (29, 252836, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 17:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 19:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (30, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 10:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (31, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 10:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 14:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (32, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 05:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (33, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:15:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 10:35:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (34, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:15:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 10:35:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (35, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 05:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 14:00:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (36, 260774, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 07:00:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 10:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (37, 289039, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 16:30:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:15:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (38, 289039, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 13:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 22:15:00', 'dd-mm-yyyy hh24:mi:ss'), 'I');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (39, 289039, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 13:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 16:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'A');
insert into testsched (SEQ, EMPL_ID, SCHED_DT, START_DT_TM, END_DT_TM, REC_STAT)
values (40, 289039, to_date('03-03-2008', 'dd-mm-yyyy'), to_date('03-03-2008 13:45:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('03-03-2008 16:30:00', 'dd-mm-yyyy hh24:mi:ss'), 'U');
========================= Problem Statement =======================================
Problem Statement:
Select all employees whose active schedule (rec_stat = 'A') start date & time falls
between "16:30" and "17:45".
An employee may be having multiple schedules on a day. It may be continuous or may be
having breaks in between the schedules.
If an employee schedule is continuous then the minimum schedule start date & time is
considered as the start date & time of the work.
If an employee is having breaks in the schedule, then each schedule start date & time is
considered as start date & time.
e.g:-1
1     39609     2008/03/03     2008/03/03 07:00:00     2008/03/03 11:00:00     A
2     39609     2008/03/03     2008/03/03 11:00:00     2008/03/03 11:30:00     A
In above case, the employee schedule is continuous. The start date & time is 2008/03/03 07:00:00
e.g:-2
19     169241     2008/03/03     2008/03/03 05:30:00     2008/03/03 14:00:00     A
21     169241     2008/03/03     2008/03/03 17:30:00     2008/03/03 22:00:00     A
In above case, the employee is having a break in between. Then both records
start date & time (i.e. 2008/03/03 05:30:00, 2008/03/03 05:30:00 ) is considered
as start date & time.
e.g:-3
30     260774     2008/03/03     2008/03/03 07:00:00     2008/03/03 10:30:00     A
31     260774     2008/03/03     2008/03/03 10:30:00     2008/03/03 14:00:00     A
32     260774     2008/03/03     2008/03/03 05:30:00     2008/03/03 07:00:00     A
In above case, the employee schedule is continuous. The start date & time is 2008/03/03 05:30:00
========================= Query to test Individual Employees =======================================
Query-1: Test query to see the CASE and LEAD function works fine. If "CAL = 0" means that all
schedules are continuous and the employee needs to ignored.
SELECT fw.*,
CASE WHEN LEAD(FW.END_DT_TM, 1)
OVER(ORDER BY FW.START_DT_TM DESC ) IS NULL AND
fw.start_dt_tm BETWEEN
TO_DATE('03/03/2008 16:30:00','mm/dd/yyyy hh24:mi:ss') AND
TO_DATE('03/03/2008 17:45:00','mm/dd/yyyy hh24:mi:ss')
THEN Fw.seq
WHEN LEAD(FW.END_DT_TM, 1)
OVER(ORDER BY FW.START_DT_TM DESC) != FW.START_DT_TM AND
fw.start_dt_tm BETWEEN
TO_DATE('03/03/2008 16:30:00','mm/dd/yyyy hh24:mi:ss') AND
TO_DATE('03/03/2008 17:45:00','mm/dd/yyyy hh24:mi:ss')
THEN Fw.seq
ELSE 0
END AS "CAL"
FROM TESTSCHED fw
WHERE fw.empl_id = 289039
and fw.rec_stat = 'A'
Query Results
SEQ     EMPL_ID     SCHED_DT     START_DT_TM          END_DT_TM          REC_STAT     CAL
37     289039     2008/03/03     2008/03/03 16:30:00     2008/03/03 22:15:00     A          0
39     289039     2008/03/03     2008/03/03 13:45:00     2008/03/03 16:30:00     A          0
Since all "CAL" column is zero, the employee should be ignored.
========================= Query to be used in the application =======================================
Query-2: Actual Query executed in the application which is not working. Query-1 is used as subquery
here.
SELECT
F1.SEQ,
F1.EMPL_ID,
F1.SCHED_DT,
F1.START_DT_TM,
F1.END_DT_TM,
F1.REC_STAT
FROM TESTSCHED F1
WHERE F1.SEQ IN
(SELECT CASE
WHEN LEAD(FW.END_DT_TM, 1)
OVER(ORDER BY FW.START_DT_TM DESC) IS NULL AND
FW.START_DT_TM BETWEEN
TO_DATE('03/03/2008 16:30:00', 'mm/dd/yyyy hh24:mi:ss') AND
TO_DATE('03/03/2008 17:45:00', 'mm/dd/yyyy hh24:mi:ss') THEN FW.SEQ
WHEN LEAD(FW.END_DT_TM, 1)
OVER(ORDER BY FW.START_DT_TM DESC) != FW.START_DT_TM AND
FW.START_DT_TM BETWEEN
TO_DATE('03/03/2008 16:30:00', 'mm/dd/yyyy hh24:mi:ss') AND
TO_DATE('03/03/2008 17:45:00', 'mm/dd/yyyy hh24:mi:ss') THEN FW.SEQ
ELSE 0
END
FROM TESTSCHED FW
WHERE FW.EMPL_ID = F1.EMPL_ID
AND FW.REC_STAT = 'A')
Query-2 Results
SEQ     EMPL_ID     SCHED_DT     START_DT_TM          END_DT_TM          REC_STAT
9     118327     2008/03/03     2008/03/03 17:30:00     2008/03/03 22:00:00     A
12     120033     2008/03/03     2008/03/03 17:30:00     2008/03/03 19:30:00     A
17     126690     2008/03/03     2008/03/03 16:45:00     2008/03/03 18:45:00     A
21     169241     2008/03/03     2008/03/03 17:30:00     2008/03/03 22:00:00     A
24     200716     2008/03/03     2008/03/03 17:30:00     2008/03/03 22:00:00     A
28     252836     2008/03/03     2008/03/03 17:30:00     2008/03/03 19:30:00     A
37     289039     2008/03/03     2008/03/03 16:30:00     2008/03/03 22:15:00     A
Problem with Query-2 Results:
Employee IDs 126690 & 289039 should not appear in the List.
Reason: Employee 126690: schedule start date & time is 2008/03/03 12:45:00 and falls outside
"16:30" and "17:45"
14     126690     2008/03/03     2008/03/03 18:45:00     2008/03/03 21:15:00     A
17     126690     2008/03/03     2008/03/03 16:45:00     2008/03/03 18:45:00     A
15     126690     2008/03/03     2008/03/03 12:45:00     2008/03/03 16:45:00     A
Reason: Employee 289039: schedule start date & time is 2008/03/03 13:45:00 and falls outside
37     289039     2008/03/03     2008/03/03 16:30:00     2008/03/03 22:15:00     A
39     289039     2008/03/03     2008/03/03 13:45:00     2008/03/03 16:30:00     A

Your LEAD function is order by fw.start_dt_tm, in your first sql, the where clause limited the records return to REC_STAT = A and EMPL_ID = 289039.
In your 2nd query, there is no where clause, so to the LEAD function, the next record after seq 37 is seq 38 which has an end date of 2003-03-03 10:15 pm, not equal to the start time of record seq 37.
Message was edited by:
user477455

A wired problem

I got a wired problem to get number of records in a db.
the following code works no problem, and get total record number of a db,
but when I run it under debug mode. the record number get 0;
(windows, ms studio.net2005)
any idea?
thanks
int main()
Db db_(NULL,0);
db_.open(NULL, ".\\test.db", NULL, DB_RECNO, DB_CREATE, 0);
DB_BTREE_STAT *sp;
db_.stat(NULL, &sp, DB_FAST_STAT); // DB_READ_COMMITTED);
unsigned long recnum = (unsigned long) sp->bt_nkeys;
cout<<"number of records= "<< recnum<<endl;
return 0;
}

Hi,
Check to see if the database with the records is in the debug directory. When you switch to the Release version the current directory changes to Release.
Ron

A very wired problem of Pages

I am using Chinese System, and I need to write a lot in English, but I encounter a very very wired problem. For example, after typing January or February, or Monday or Tuesday, I hit space or return key on the keyboard, it will automatically change it into Chinese, who can explain this and tell me how to deal with it? It drives me crazy!
Thanks

Vampire,
Welcome to Apple discussions.
It sounds like you either have a conflict with a keystroke expander or with Pages built-in auto-correction feature. To test this, try shutting off the auto-correction by clicking on Pages > Preferences > Auto-Correction > then UNcheck Symbol & Text Substitution. Let us know if that works.
-Dennis

Wired problems... please help urgent!!!

Hi all, recently I´m having wired problems in my computer... This describes the problem:
Laste weak:
-Computer ´not starting: it was allways hanging up in the Platinum screen at startup;
-next when it started after reboots, one of my dvdrw drives didnt work (the tray didnt open and windows was unable to show the drive in My Computer... this happened a few times before after installing nvidia ide drivers, but after i unninstalled them, it happened a few times 1 or 2 times again);
-2 or 3 times the computer didnt start again couse it didnt boot and this message appeared (disk not found please insert system disk or something like that)
-After changing IDE cable in the hard drive the problem was gone for one day or two.
Yesterday:
-computer started giving those blue screens of death after being a while in windows (happened several times);
-the disk when working like hell (making disk defragmentation and other things) reached critical tempereatures (42 ºc showed in HDD Heath) making wired noises turning on and off
-after restart it wouldnt start windows (started NVIDIA mac adress client or something like that) the boot in bios has the HD in the 1st priority.
Can someone help me? Im going crazy with my computer... im suspectin about my hard drime but... dont know...
this is my rig:
Amd Athlon 64 2800+ not overclocked
MSI k8n Neo platinum nForce3 250Gb whith 5.11 nvidia drivers
1 Gb memory 2x512Mhz 400 kingston
ATI Radeon 9600xt with Omega drivers Catalyst 5.12
120 Gb Samsung HD sp1203n
450w Power supply

Hola,
I'm affraid I have no good news for you as it looks like your computer's Hard Drives is going down.
URGENT ATTENTION : Backup all your data inmediatly as it's on high risk of being lost.
Once you have done this, try (if you can) to test that hard drive in another computer. If you get the same
results in other computer (clicking and spinning up and down) then the hard drive is damaged for sure.
NOTE:
Be sure to test it well, because if may seem to work fine for several minutes or even hours. But if the drive
is indeed damaged, the problems will be back sooner or later.
For best results, download (from your hard drive manufacturer's support page) the appropiate diagnostic tool,
and once you have it, run it from DOS. Your hard drive manufacturer, should have instructions on how to use
the tool, please read them carefully and follow them correctly in order to get the most accurate results once
you run the tool.
In the case the hard drive is faulty, then replace it as soon as you can.
If not, then remove the cable you're using to connect your hard drive to your mainboard and use a new one,
and see if the problem persists or not.
Let us know how it goes ok ?
Be well and good luck

802.1x authentication problem on C2960S-48TS-L with Linux clients

Hi,
Due to implementing wired 802.1x in my company I fased with problem of authentication of some Linux computers (Ubuntu 13.10+) via mab at the one of my Access switches(C2960S-48TS-L). The problem exist on IOS 12.55 and 15.0(2)SE6.
It seems that Authenticator can't detect MAC address of supplicant. In debug the MAC address is (Unknown MAC) or (0000.0000.0000).
Before authentication I could see registered MAC address on the switchport interface(without 802.1x settings on the port):
sh mac address-table interface g1/0/2 "before 802.1x authentication"
Vlan Mac Address Type Ports
2 0015.990f.60d9 STATIC Gi1/0/2
The host should get to Vlan 2 after failed authentication(according to port settings). But actually after trying to authenticate the host on this port
loses connection with network and doesn't get in 2 Vlan
sh mac address-table interface g1/0/2 "after 802.1x authentication"
Vlan Mac Address Type Ports
sh authentication sessions
Interface MAC Address Method Domain Status Session ID
Gi1/0/24 (unknown) dot1x DATA Authz Success 6A7D1FAF0000000000023E32
Gi1/0/25 (unknown) dot1x DATA Authz Success 6A7D1FAF0000000200024193
Gi1/0/2 (unknown) mab UNKNOWN Running 6A7D1FAF000000280011BA1A
sh dot1x interface g1/0/2 details
Dot1x Info for GigabitEthernet1/0/2
PAE = AUTHENTICATOR
QuietPeriod = 5
ServerTimeout = 0
SuppTimeout = 30
ReAuthMax = 2
MaxReq = 2
TxPeriod = 3
sh run int g1/0/2
interface GigabitEthernet1/0/2
description ## User Port ##
switchport access vlan 2
switchport mode access
switchport voice vlan 5
switchport port-security maximum 5
switchport port-security
switchport port-security aging time 2
switchport port-security aging type inactivity
ip arp inspection limit rate 120
authentication event fail retry 0 action authorize vlan 2
authentication event server dead action authorize vlan 2
authentication event no-response action authorize vlan 2
authentication host-mode multi-host
authentication port-control auto
authentication periodic
authentication timer reauthenticate 3900
authentication timer inactivity 300
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout quiet-period 5
dot1x timeout tx-period 3
storm-control broadcast level 1.00
storm-control multicast level 1.00
storm-control action trap
no cdp enable
spanning-tree portfast
spanning-tree bpduguard enable
spanning-tree guard root
end
I have tried to change authentication host-mode to multi-domain but the problem remains.
"debug dot1x all" in the attached file.
Please help me to resolve this issue

I have removed port security but still have failed authentication on the port
002262: Mar 26 16:23:26.516: dot1x-ev(Gi1/0/2): Deleting client 0x9A000053 (0000.0000.0000)
002263: Mar 26 16:23:26.516: dot1x-ev:Delete auth client (0x9A000053) message
002264: Mar 26 16:23:26.516: dot1x-ev:Auth client ctx destroyed
002265: Mar 26 16:23:26.715: dot1x_auth Gi1/0/2: initial state auth_initialize has enter
002266: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): 0x6D000054:auth_initialize_enter called
002267: Mar 26 16:23:26.715: dot1x_auth Gi1/0/2: during state auth_initialize, got event 0(cfg_auto)
002268: Mar 26 16:23:26.715: @@@ dot1x_auth Gi1/0/2: auth_initialize -> auth_disconnected
002269: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): 0x6D000054:auth_disconnected_enter called
002270: Mar 26 16:23:26.715: dot1x_auth Gi1/0/2: idle during state auth_disconnected
002271: Mar 26 16:23:26.715: @@@ dot1x_auth Gi1/0/2: auth_disconnected -> auth_restart
002272: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): 0x6D000054:auth_restart_enter called
002273: Mar 26 16:23:26.715: dot1x-ev(Gi1/0/2): Sending create new context event to EAP for 0x6D000054 (0000.0000.0000)
002274: Mar 26 16:23:26.715: dot1x_auth_bend Gi1/0/2: initial state auth_bend_initialize has enter
002275: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_initialize_enter called
002276: Mar 26 16:23:26.715: dot1x_auth_bend Gi1/0/2: initial state auth_bend_initialize has idle
002277: Mar 26 16:23:26.715: dot1x_auth_bend Gi1/0/2: during state auth_bend_initialize, got event 16383(idle)
002278: Mar 26 16:23:26.715: @@@ dot1x_auth_bend Gi1/0/2: auth_bend_initialize -> auth_bend_idle
002279: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_idle_enter called
002280: Mar 26 16:23:26.715: dot1x-ev(Gi1/0/2): Created a client entry (0x6D000054)
002281: Mar 26 16:23:26.715: dot1x-ev(Gi1/0/2): Dot1x authentication started for 0x6D000054 (0000.0000.0000)
002282: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): Posting !EAP_RESTART on Client 0x6D000054
002283: Mar 26 16:23:26.715: dot1x_auth Gi1/0/2: during state auth_restart, got event 6(no_eapRestart)
002284: Mar 26 16:23:26.715: @@@ dot1x_auth Gi1/0/2: auth_restart -> auth_connecting
002285: Mar 26 16:23:26.715: dot1x-sm(Gi1/0/2): 0x6D000054:auth_connecting_enter called
002286: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): 0x6D000054:auth_restart_connecting_action called
002287: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): Posting RX_REQ on Client 0x6D000054
002288: Mar 26 16:23:26.721: dot1x_auth Gi1/0/2: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
002289: Mar 26 16:23:26.721: @@@ dot1x_auth Gi1/0/2: auth_connecting -> auth_authenticating
002290: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): 0x6D000054:auth_authenticating_enter called
002291: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): 0x6D000054:auth_connecting_authenticating_action called
002292: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): Posting AUTH_START for 0x6D000054
002293: Mar 26 16:23:26.721: dot1x_auth_bend Gi1/0/2: during state auth_bend_idle, got event 4(eapReq_authStart)
002294: Mar 26 16:23:26.721: @@@ dot1x_auth_bend Gi1/0/2: auth_bend_idle -> auth_bend_request
002295: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_request_enter called
002296: Mar 26 16:23:26.721: dot1x-ev(Gi1/0/2): Sending EAPOL packet to group PAE address
002297: Mar 26 16:23:26.721: dot1x-ev(Gi1/0/2): Role determination not required
002298: Mar 26 16:23:26.721: dot1x-registry:registry:dot1x_ether_macaddr called
002299: Mar 26 16:23:26.721: dot1x-ev(Gi1/0/2): Sending out EAPOL packet
002300: Mar 26 16:23:26.721: EAPOL pak dump Tx
002301: Mar 26 16:23:26.721: EAPOL Version: 0x3 type: 0x0 length: 0x0005
002302: Mar 26 16:23:26.721: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
002303: Mar 26 16:23:26.721: dot1x-packet(Gi1/0/2): EAPOL packet sent to client 0x6D000054 (0000.0000.0000)
002304: Mar 26 16:23:26.721: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_idle_request_action called
002305: Mar 26 16:23:29.814: dot1x-sm(Gi1/0/2): Posting EAP_REQ for 0x6D000054
002306: Mar 26 16:23:29.814: dot1x_auth_bend Gi1/0/2: during state auth_bend_request, got event 7(eapReq)
002307: Mar 26 16:23:29.814: @@@ dot1x_auth_bend Gi1/0/2: auth_bend_request -> auth_bend_request
002308: Mar 26 16:23:29.814: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_request_request_action called
002309: Mar 26 16:23:29.814: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_request_enter called
002310: Mar 26 16:23:29.814: dot1x-ev(Gi1/0/2): Sending EAPOL packet to group PAE address
002311: Mar 26 16:23:29.814: dot1x-ev(Gi1/0/2): Role determination not required
002312: Mar 26 16:23:29.814: dot1x-registry:registry:dot1x_ether_macaddr called
002313: Mar 26 16:23:29.814: dot1x-ev(Gi1/0/2): Sending out EAPOL packet
002314: Mar 26 16:23:29.814: EAPOL pak dump Tx
002315: Mar 26 16:23:29.814: EAPOL Version: 0x3 type: 0x0 length: 0x0005
002316: Mar 26 16:23:29.814: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
002317: Mar 26 16:23:29.814: dot1x-packet(Gi1/0/2): EAPOL packet sent to client 0x6D000054 (0000.0000.0000)
002318: Mar 26 16:23:32.907: dot1x-sm(Gi1/0/2): Posting EAP_REQ for 0x6D000054
002319: Mar 26 16:23:32.907: dot1x_auth_bend Gi1/0/2: during state auth_bend_request, got event 7(eapReq)
002320: Mar 26 16:23:32.907: @@@ dot1x_auth_bend Gi1/0/2: auth_bend_request -> auth_bend_request
002321: Mar 26 16:23:32.907: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_request_request_action called
002322: Mar 26 16:23:32.907: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_request_enter called
002323: Mar 26 16:23:32.913: dot1x-ev(Gi1/0/2): Sending EAPOL packet to group PAE address
002324: Mar 26 16:23:32.913: dot1x-ev(Gi1/0/2): Role determination not required
002325: Mar 26 16:23:32.913: dot1x-registry:registry:dot1x_ether_macaddr called
002326: Mar 26 16:23:32.913: dot1x-ev(Gi1/0/2): Sending out EAPOL packet
002327: Mar 26 16:23:32.913: EAPOL pak dump Tx
002328: Mar 26 16:23:32.913: EAPOL Version: 0x3 type: 0x0 length: 0x0005
002329: Mar 26 16:23:32.913: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
002330: Mar 26 16:23:32.913: dot1x-packet(Gi1/0/2): EAPOL packet sent to client 0x6D000054 (0000.0000.0000)
002331: Mar 26 16:23:36.001: dot1x-ev(Gi1/0/2): Received an EAP Timeout
002332: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): Posting EAP_TIMEOUT for 0x6D000054
002333: Mar 26 16:23:36.001: dot1x_auth_bend Gi1/0/2: during state auth_bend_request, got event 12(eapTimeout)
002334: Mar 26 16:23:36.001: @@@ dot1x_auth_bend Gi1/0/2: auth_bend_request -> auth_bend_timeout
002335: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_timeout_enter called
002336: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_request_timeout_action called
002337: Mar 26 16:23:36.001: dot1x_auth_bend Gi1/0/2: idle during state auth_bend_timeout
002338: Mar 26 16:23:36.001: @@@ dot1x_auth_bend Gi1/0/2: auth_bend_timeout -> auth_bend_idle
002339: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): 0x6D000054:auth_bend_idle_enter called
002340: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): Posting AUTH_TIMEOUT on Client 0x6D000054
002341: Mar 26 16:23:36.001: dot1x_auth Gi1/0/2: during state auth_authenticating, got event 14(authTimeout)
002342: Mar 26 16:23:36.001: @@@ dot1x_auth Gi1/0/2: auth_authenticating -> auth_authc_result
002343: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): 0x6D000054:auth_authenticating_exit called
002344: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): 0x6D000054:auth_authc_result_enter called
002345: Mar 26 16:23:36.001: %DOT1X-5-FAIL: Authentication failed for client (Unknown MAC) on Interface Gi1/0/2 AuditSessionID 6A7D1FAF0000006001916AC3
002346: Mar 26 16:23:36.001: dot1x-ev(Gi1/0/2): Sending event (2) to Auth Mgr for 0000.0000.0000
002347: Mar 26 16:23:36.001: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (Unknown MAC) on Interface Gi1/0/2 AuditSessionID 6A7D1FAF0000006001916AC3
002348: Mar 26 16:23:36.001: dot1x-ev(Gi1/0/2): Received Authz fail for the client 0x6D000054 (0000.0000.0000)
002349: Mar 26 16:23:36.001: dot1x-ev(Gi1/0/2): Deleting client 0x6D000054 (0000.0000.0000)
002350: Mar 26 16:23:36.001: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (Unknown MAC) on Interface Gi1/0/2 AuditSessionID 6A7D1FAF0000006001916AC3
002351: Mar 26 16:23:36.001: dot1x-sm(Gi1/0/2): Posting_AUTHZ_FAIL on Client 0x6D000054
002352: Mar 26 16:23:36.001: dot1x_auth Gi1/0/2: during state auth_authc_result, got event 22(authzFail)
002353: Mar 26 16:23:36.006: @@@ dot1x_auth Gi1/0/2: auth_authc_result -> auth_held
002354: Mar 26 16:23:36.006: dot1x-ev:Delete auth client (0x6D000054) message
002355: Mar 26 16:23:36.006: dot1x-ev:Auth client ctx destroyed
002356: Mar 26 16:23:36.006: dot1x-ev:Aborted posting message to authenticator state machine: Invalid client

Apple Airport 802-11n connection problems with Windows 7

I'm basically a MAC user, but my son is trying to get his Windows 7 Toshiba laptop to connect to my Apple 802-11n wifi. It will see the wifi, but when clicked on my network the connection fails before I get to input the password. Yet neighborhood 802-11n connections get to the password screen. The lap[top is a Toshibe satellite L755-S5107 running Windows 7.
I'm not very savvy on PCs, so I don't know where to look for versions of his software et al.
Anyone familiar with such problems?

Toshiba may be doing something different than other manufacturers, so your best bet might be a Toshiba support site.
Official Toshiba Support | Toshiba
Another source that may of some help is the Windows troubleshooting guide for WiFi connections:
Wired and wireless network connection problems in Windows ...
Not sure how much more help that we can provide on an Apple support site for Apple wireless routers.

802.1x wired problems

Similar Messages

Maybe you are looking for