Wireless Router and the Mac

Quick question. I just installed a Linksys Wireless Router and voila, I am wirelessly connected. Right out of the box.
Question: Are our Macs automatically protected from "outsiders" or do we have to do something manually?
Re: One Intel iMac and one Mac Book Pro. The Router is connected to my one and only PC in the house. This PC is "wired" as it has no wireless card. I want to keep it this way. Just want my Macs wireless.
Thanks for your help.
Intel iMac 17" and Mac Book Pro Mac OS X (10.4.6)

Thank you all for all your help. I was able to get to the Setp Up page of my Router and rename the Router and create a new password. I also disabled Broadcast. And yes, I enabled Firewall.
I noticed now that the signal in my bedroom for my MacBook Pro is rather weak - sometimes I can't connect at all. Could this be because of my disabling Broadcast? Is there something I can use to boost my signal in the bedroom such as an antenna?
The signal was fine on Sunday when I first plugged in the Router out of the box without any modifications.
Again, thank you all for your help.
Jenise

Similar Messages

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

I havea WRT350N Wireless Router and the DynDNS Service is...

I havea WRT350N Wireless Router and the DynDNS Service is not
resolving the correct Internet IP Address, is resolving to a local IP and
I see it on the DDNS Page on my Router Setup Screen. I'm
trying to connect to my DVR from a Remote Site with my DynDNS
Client in my computer but I could not do it. Port 80 (my DVR WAN
Port) is Open and redirected to my DVR local IP, my DynDNS Account
is working fine but theres no way that I could access my DVR or even
my Router if I activate the Remote Management Capabilities.

The best source to ask is HughesNet. According to their web site the HNS7000S is a router. Instructions how to set up a home network can be found here.
I cannot find instructions how to set up DDNS on the HN70000S router. The suggested setup in the KB article link above won't help you with that either. I don't know whether it is possible with HughesNet to put the router into bridge mode and set up the WRT for internet. It may not be possible at all. But you have to check with HughesNet.

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

TS1453 Apple TV doesn't show up in my iTunes. I've done all the troubleshooting steps, updated all software, restarted Apple TV, wireless router and computer. Devices doesn't show up at all in my sidebar.Apple TV doesn't show up in preferences

Help. My Apple TV won't sync with my computer. I've done all the troubleshooting tips, but Apple TV doesn't show up in my Preferences under devices.
2. Reconnect Apple TV to iTunes.
Choose iTunes > Preferences (Mac) or Edit > Preferences (Windows), click Apple TV, and make sure "Look for Apple TVs" is selected.
I see no option to select "look for Apple TV's" in Preferences, and there is no device list at all in my sidebar.
3. If Firewall is on in Mac OS X (in the Sharing pane of System Preferences), make sure iTunes Music Sharing is selected.
There is no option to select iTunes Music Sharing in my System Preferences - see screenshot
I've updated all software, restarted Apple TV, my wireless router, and my computer. Both my computer and the Apple TV are connected to the same wireless network and both are operating properly. They just wont connect to each other.
Does anyone have any suggestions?

FIRSTLY: bookmark following for further reference (it describes basic setup, both to link for syncing and to stream - from any computer.)
Apple TV (1st generation): Differences between syncing and streaming" )
Now as to your problem: If you check under "Computers" in the "Settings" menu you will most likely see the name of your iTunes library Greyed out. IF that's the case, you'll basically need to re-setup your ATV., you can do so as follows (instructions are intentionally over described, but basically your disconnecting then reconnecting your ATV1. Downside (which seems to come with all methods is that you'll have to resync all your media)
**A (not ideal but effective solution)
If ATV 1 had been working but suddenly 'disappeared" from iTunes sidebar
The following solution will almost surely work to regain your ability to Sync:
QUIT iTunes
Select "Computers" from "Settings" Menu.
Select your "greyed out" iTunes library.
This will bring up a window named "Disconnect from iTunes"
You're now given the choice to Cancel, or disconnect. WITH THE WARNING that if you disconnect any content synced with iTunes, will be erased. (in fact it will be removed from your ATV but not your computer)
Assuming ALL of your media IS on your computer, Go ahead and disconnect.
Follow instructions in the Apple doc above about setting up your ATV as a paired computer.
After you ATV gen1 reappears in the sidebar. Reset all your desired syncing preferences,
Begin syncing.
All will be fine again, (at least till the next time this occurs.) I've had to do this twice this year.
ALTERNATELY:
SHARING (a QUICKER, less destructive TEMPORARY solution (if you just want to play your media now)
You CAN set your computer to Share by following instructions in the same doc under the heading:
"How to connect to a shared computer"
HOWEVER, this will not allow you to sync info.
I've read alternate solutions on this board, one involved changing the name of your iTunes Library etc... you may wish to try this first (if it applies) https://discussions.apple.com/message/17943841?ac_cid=142432#17943841
What I'd like to know: What causes this problem... I'm suspecting iTunes updates, or any iTunes database issues or crashes. Or maybe too many visitors connecting to your other Apple devices (ATV 2 for example) or heck the weather in Guatemala...

I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back and it will also send my music to the airport express?

I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

Can anyone recommend a good wireless router for both Mac and PC?

Hello! I am looking to purchase a wireless router, and was told that Linksys in general (and a specific model in particular) isn't Mac-friendly. I need a nuetral router that works well with my MacBook and my Dell laptop (which I need to purchase a wireless card for). I also have a PC but I can just connect it via Ethernet cable.
Any suggestion is greatly appreciated!
MacBook 1,1 Mac OS X (10.4.7)

hi - Linksys wireless routers work fine with macs (i
have one)...
perhaps the reason you heard they're not mac friendly
is because the software they give you to configure
the router only runs under wintel.... but you really
don't need that software...
one can have total control over the setup simply by
firing up a web browser (on a machine either directly
connected to the router via ethernet or w/ a wireless
connection) and going to http://192.168.1.1/
that'll get you talking directly to the router...
i'm actually not aware of any routers that really
don't work well w/ macs... so i think you can just
choose based on features & price...
cheers
p.s. Welcome to Apple Discussions!
I currently am trying to set up a linksys router. Unfortunately, I dont know what to do once i am at the router's config page to make it start working. Can you help me out? thanks.

My iphone 4 wont allow me to connect to my home wifi or anyother i have reset my phone and wireless router and still wont allow me what is the problem ?

my iphone 4 wont allow me to connect to wifi of any sort i have rest the settings on my phone and my wireless router whats the problem

Use this article: iOS: Troubleshooting Wi-Fi networks and connections

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
WDS network
If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Hi. I'm trying to set-up the wireless access times in my Airport Utility. I need to enter the "Description" and the "MAC Address" of each wireless client before I assign access times. What are these? Thanks.

Let's say that an iPhone is one of the wireless clients that you want to allow access to the network.
The Description of this device is anything that you want to specify for easy identification purposes. For example, the Description might be something like......
Rex's iPhone
The MAC Address, also known as a Wi-Fi Address is a unique indentifiction number that is assigned to every device. The number will always follow this form:
xx : xx : xx : xx : xx : xx, where "x" could be a number or letter.
To find the MAC Address or Wi-Fi Address of an iPhone or iPad.....
On the Home screen.....
Tap Settings
Tap General
Tap About
Wi-Fi Address is the item that you want
If you have a Mac computer......you can find the MAC Address or Wi-Fi Address as follows:
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
The Wi-Fi Address for the Mac is located at the bottom of the window
Other wireless devices usually have the MAC Address or Wi-Fi Address on the label on the back or bottom of the device

Wireless Router and the Mac

Similar Messages

Maybe you are looking for