WiSM version 6 Cannot modifiy service interface

Can any body help me with this
although cisco sw advisor said that the best IOS for my hardware 6509 Sup720 IOS: (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF16 suits the WiSM; And I tested it already with WiSM version 5.0 but when I've upgraded the WiSM to version 6.0 the service interface from the switch side says:
B5_Noc2_CS1(config)#int gig 4/9
% This interface cannot be modified
can anyone solve this issue; as the customer refuse to upgrade the switch IOS & He wants to use the latest ED WiSM sw 6.0; so please Help !!!!!

This is normal, you cannot modify those ports "i guess the Wism is on slot 4" try to change it to slot 3 and you will be able to configure 4/ interfaces...i once got somthing like this.
the solution is to follow this guide.
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a00808330a9.shtml#config

Similar Messages

  • Creating Entity Object from Service Interface - JDeveloper version 11.1.1.3

    In our project, we don't intend to have any JDBC connection to a database and want to create all my entity objects using SDO web services deployed in a remote server. I could create an entity object based on a SDO web service deployed in the standalone WL server successfully. But at the time of Development,when I select ADF Business Component --> Entity Object, it always takes to a screen that prompts for a JDBC connection, if you have no connection defined in the project yet. To bypass this, I need to create a valid connection to a local DB and then I can go the next page that prompts me to to choose service interface and asks for a WSDL URL. How do I get around creating a JDBC connection and create a service interface based data source directly?
    To get around this issue, I created a connection to a local DB by providing a wrong password to make sure that we don't need a valid db connection. The application module (Business Component Browser) works fine when the DB connection is broken. But when I create a JSF page and put the data control there, if we don't have the DB connection established it gives error during deployment.I tried deleting the unused connection, but that gives a lot of errors during deployment. My question is;
    1. How can I create a service interface based data source by-passing the requirement for a connection?
    2. If that's not possible - how can I cleanly delete the JDBC connection and all it's dependencies, so that, it deploys and runs without error

    Frank,
    Thanks for your response.
    I have made some progress in last two days and solved some of the original issues. I deleted the fake JDBC connection from connection.xml that I had to use to go to the second screen that lets me select the WSDL for the service interface. After that, I checked off the "Auto Generate and Synchronize ..." option from Application --> Application Properties --> Deployment. (thanks to Steve Muench's blog post on this subject). After that, I could deploy the JSF page and the page shows up with no problem.
    However, when I try to run the App Module that was created from the WSDL (service interface), it brings up a pop-up with heading "Password Required" that says "Enter the password for" and asks for a user name and password (not sure what they are as they take any value and takes me to the next screen). After that, I can open the View and navigate through it. When i change some data and try to commit - it makes the change to the data and stores in the DB but gives an error saying "(oracle.jbo.NotConnectedException) JBO-25200: Application module is not connected to a database."
    Also, the data control created from the service interface had operations called Commit and Rollback. I used the Commit on JSF page and that does the exact same thing too. Any idea?
    Also - when we consume a SDO WSDL to create the entity object - how can we access the SOAP Request and Response objects? We have to implement WS-Security by instrumenting the SOAP header and need to get a handle on that. Is there a mechanism similar to JAX-WS handler framework for SDO?
    R,
    Chandan

  • CreditWorthinessQuery_out service interface is not available

    Hello All,
    We are trying to connect SAP SD with SAP FSCM.
    Whenever we are trying to create Sales order, it giving error. Actually at this point system is trying to check customers credit worthiness.
    In sap system , sxmb_moni shows message into error as receiver is not found.
    This is the namespace and service interface.
    "http://sap.com/xi/PI/FIN/Operational/Global"  and  service interface "CreditWorthinessQuery_out"
    In PI7.1 ESR  FINBASIS_604 content is imported. I don't see above namspace and service interface  in given software component.
    Please let me know which software component need to be imported in ESR?.
    thanks,
    Sharada

    Thanks UDO,
    We need to integrate SAP SD with SAP FSCM.
    As per your suggestion, I have imported  following  xi contents in ESR,
    1.
         FINBASIS 603  as  SAP FSCM version is as given
         FINBASIS     603     0004     SAPK-60304INFINBASIS     FINBASIS 603     Component Supp. Pkg.
    2.SAP APPL 603 as logistics and Accounting patch level is as
       SAP_APPL     603     0004     SAPKH60304     Logistics and Accounting     APPL Support Package
    I have created a business system and have software product SAP ECC6.0 and SAP FSCM6.0.
    I cannot use interfaces from above software components as SAP ECC6.0 adds software component SAP APPL6.0  to that business system and  SAP FSCM6.0 adds software component to that business system.
    Latest version of software product of ECC available in SLD is  SAP ECC6.0
    Latest version of software product of SAP FSCM  available in SLD is  SAP FSCM6.0
    I want to add software components SAP APPL 603 and FINBASIS 603 to my business system. In this case which software product can be added to technical system?.
    Do I have to imprt latest CIM component in SLD?
    thanks,
    Sharada

  • JDeveloper 11.1.1.1.0:  AM Service Interface Problems

    Hi,
    I am using Jdev 11.1.1.1.0 and Business Components, Application Module, Service Interface.
    I want to publish a custom method of my application module wich expectes some parameters and returns a List<ViewObject> using an Applcation Module Service.
    I tested the 'Application Module' and the 'Application Module Service' in the 'HTTP Analyser' and 'Embedded Web Logic Server' and it works fine.
    But now I am facing some problems.
    Problem 1:
    When starting "Test Web Service" I get the Error Message: Unable to Invoke Tester - The Web Service Tester cannot be invoked, because the WSDL document of the selected service cannot be read.
    Clicking the Target URL in the DefaultServer:log leads me to the HTTP Analyser and I am able to test my AMService. It works fine.
    What's the reason for the Error message and has this something to do with my next problem?
    Problem 2:
    Copying the URL into the browser (IE7, Mozillla Firefax 3.0) shows the ... AM Servcie endpoint, but the requested parameter area is missing when the browsers language is set to German. With browser language set to english the paramters are displayed and the service can be invoked.
    What can I do, to be independent from the Language settings of the browser?
    Please help
    Thank you
    Anita

    Dear,
    found the solution (after trying last 1-2 days ...).
    I was already using java 1.7 update 7.
    I had to start java settings and to deselect Java 1.7.0_07.
    Instead I selected latest Java version from Apple: 1.6.0_35-b10-428.
    With these settings the installer finishes without crash.
    Kind regards
    Lorenz
    Edited by: Lorenz on Oct 4, 2012 1:47 PM

  • Regarding creation of  service interface in PI7.0

    Hi friends,
    If i try to create a service interface in PI7.10 it shhows error like
    <b>You cannot create new objects in component CCBPM, 1.0 of sap.com because no original language is defined for the components</b>
    how can i solve this issue,plz help me out regarding this.
    Thanks & Regards,
    saran
    Message was edited by:
            Srinivasa D Rao

    Hi...
    Tools------> Personal settings.
    Set the logon and original language to English and try...
    I hope it will work...
    Regards
    San
    Remember to set the thread to solved when you have received a solution there is a Way.

  • PI 7.1 "stateless" service interfaces prerequisites and limitations

    are there  any prerequisites and limitations for "stateless" Service interfaces.
    We are directly implementing PI 7.1, (i.e not upgrading form 7.0 or 3.0).
    so for all our service interfaces, shall we safely use tne interface pattern "statelss" instead of "Stateless(xi 3.0 compatible)".
    if use the "stateless", are there any addition prerequisites or constraints/limitations.
    can we use abap proxies, java proxies, providing webservices via xi, and consuming other webserivces in xi, all adapters, asynch, synch scenarios with "stateless" interface patterns.
    In short, are there any things that can be done using "Stateless(xi 3.0 compatible)" and cannot be done using  "stateless" interface
    are there any specific requirements for using "Stateless(xi 3.0 compatible)" even in newly implemented PI 7.1
    thanks in advance,
    Madhu.

    When it is an upgrade from 7.0 to 7.1 the default Interface pattern is Stateless (XI 30 Compatible)
    Using Stateless Interface Patterns wont cause any harm/ restriction on any of the development.
    The only twist will be in the way a condition is specified in the Receiver Determination.
    For any Interface pattern (other than Stateless(XI30 Compatible)) you wont be able to see the message structure in the Condition Editor of Receiver Determination. All other functionality (Async, Sync, Proxy) will be available.
    In such a case Condition should be specified as shown in this blog: /people/abhishek.salvi/blog/2009/07/15/sap-pi71-receiver-determination-xpath-and-you
    Regards,
    Abhishek.

  • Service interface with more than one operation

    Hi all,
    is it possible to have a service interface with more than one operation?
    I have found this blog:
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0209118050DB10459657028039341762End?blog=/pub/wlg/15123
    But this sentence:
    ABAP proxy (inbound/ outbound) cannot be developed out of a Service Interface having Operations with different type of messages included. If an ABAP proxy is to be developed then all the messages included should be of one type i.e. either the included messages should be Message Type, External Message, IDOC or RFC Message. This behavior can be observed when a Service Interface is created and then subjected for a check
    regards

    Hi,
    now the interface is running but I get another error in .NET.
    "The header 'Diagnostic' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed.  This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process.  Please ensure that the configuration of the client's binding is consistent with the service's binding. "
    Any ideas?
    regards

  • ADF BC Service interface components Production redeployment?

    Hi,
    Do ADF BC service interfaces support the weblogic server feature of production redeployment or side-by-side deployment? The use case is i deploy version 1.0 of my ADF BC webservice. After some changes I deploy version 2.0 of the same service. All clients currently connected to version 1.0 should continue using the same without any interruptions. All new clients should be redirected to version 2.0. After all clients of version 1.0 disconnect, version 1.0 of the service should be retired.
    regards,
    Satyajith

    Hi,
    isn't this a matter of deploying the EAR file and versioning it in WLS ? I am not familiar with this re-deployment option in WLS, but I don't think its the EAR file that should have this information.
    Frank

  • Service Interface Date Query

    Hi -
    I am having trouble selecting records through a view object's service interface based upon specifying a date+time in the query.
    I have a legacy table that has, among other fields, a DATE field. I create a view object on the table with a query (no entity object) and generate a service interface for the view. The web service interface works great for selecting on the non-date fields, e.g.:
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body xmlns:ns1="/rt/model/common/types/">
    <ns1:findContact>
    <ns1:findCriteria xmlns:ns2="http://xmlns.oracle.com/adf/svc/types/">
    <ns2:filter>
    <ns2:group>
    <ns2:item>
    <ns2:attribute>ContactName</ns2:attribute>
    <ns2:operator>=</ns2:operator>
    <ns2:value>bobishisname</ns2:value>
    </ns2:item>
    </ns2:group>
    </ns2:filter>
    <ns2:findAttribute>ContactTime</ns2:findAttribute>
    </ns1:findCriteria>
    </ns1:findContact>
    </soap:Body>
    </soap:Envelope>
    successfully returns the response data:
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/>
    <env:Body>
    <ns0:findLastCustomerContactResponse xmlns:ns0="/rt/model/common/types/">
    <ns2:result xmlns:ns2="/rt/model/common/types/" xmlns:ns1="/rt/model/common/"
    xmlns:ns0="http://xmlns.oracle.com/adf/svc/types/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:ContactSDO">
    <ns1:ContactTime>2012-02-14T14:59:02.0-08:00</ns1:ContactTime>
    </ns2:result>
    </ns0:findContactResponse>
    </env:Body>
    </env:Envelope>
    However, when I add the item to restrict the ContactTime, the time component is dropped, and only the date is used in the filter.
    For example, this request payload does not return a result (ContactTime greater than 12pm on 2012-02-14):
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body xmlns:ns1="/rt/model/common/types/">
    <ns1:findContact>
    <ns1:findCriteria xmlns:ns2="http://xmlns.oracle.com/adf/svc/types/">
    <ns2:filter>
    <ns2:group>
    <ns2:item>
    <ns2:attribute>ContactTime</ns2:attribute>
    <ns2:operator>></ns2:operator>
    <ns2:value>2012-02-14T12:00:00.0-08:00</ns2:value>
    </ns2:item>
    </ns2:group>
    </ns2:filter>
    <ns2:findAttribute>ContactName</ns2:findAttribute>
    </ns1:findCriteria>
    </ns1:findContact>
    </soap:Body>
    </soap:Envelope>
    However, this request payload (ContactTime greater than 2012-02-13) does:
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body xmlns:ns1="/rt/model/common/types/">
    <ns1:findContact>
    <ns1:findCriteria xmlns:ns2="http://xmlns.oracle.com/adf/svc/types/">
    <ns2:filter>
    <ns2:group>
    <ns2:item>
    <ns2:attribute>ContactTime</ns2:attribute>
    <ns2:operator>></ns2:operator>
    <ns2:value>2012-02-13T12:00:00.0-08:00</ns2:value>
    </ns2:item>
    </ns2:group>
    </ns2:filter>
    <ns2:findAttribute>ContactName</ns2:findAttribute>
    </ns1:findCriteria>
    </ns1:findContact>
    </soap:Body>
    </soap:Envelope>
    returns the record:
    <ns1:ContactName>bobishisname</ns1:ContactName>
    In the view object, I can set the attribute type on the ContactTime field to Timestamp, but it does not affect the behavior. I cannot modify the underlying table to change from DATE to TIMESTAMP.
    How do I set up the view object so that the service interface correctly passes the time component to the database and execute the query correctly?

    The select query is for fetching entry sheet number is:
    select ebeln belnr bwart bewtp menge xblnr lfbnr mwskz shkzg srvpos packno from ekbe
            into corresponding fields of table it_ekbe
              for all entries in it_ekko
                where belnr in s_belnr
                  and lfbnr in s_lfbnr
                  and ebeln = it_ekko-ebeln
                  and bwart = '101'
                  and bewtp eq 'E'.      "for service acceptance no. (GR no.)
    Here I have taken lfbnr as entry sheet number.

  • A problem with initiating a BPEL process through its web service interface

    hi,
    i am trying to initiate the helloWorld BPEL process through its web service interface. i use a proxy class that i wrote and i use it from J#.net.
    this is the relevant code part:
    hello.HelloWorldBinding wsProxy = new hello.HelloWorldBinding();
    wsProxy.initiate("Hello");
    and the server shows the following message:
    ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.
    engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Cannot
    decode properties.
    The process domain was unable to decode the properties for message guid 10, whic
    h are stored in column String index out of range: 3094; the exception reported i
    s: {2}.
    sql statement: SELECT conv_id, message_guid, domain_ref, process_id, revision_ta
    g, operation_name, receive_date, state, priority, properties FROM invoke_message
    WHERE message_guid = ?
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:152)
    at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseSche
    duledWorker.java:70)
    at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java
    :86)
    at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDriven
    BeanInvocation.java:123)
    at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome
    .java:755)
    at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:
    928)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    <2006-05-10 21:21:15,171> <ERROR> <default.collaxa.cube.engine.data> <BaseDeliveryPersistenceAdaptor::loadInvokeMetaDa
    java.lang.StringIndexOutOfBoundsException: String index out of range: 3094
    at java.lang.String.substring(String.java:1441)
    at com.collaxa.common.util.LVDecoder.decodeElement(LVDecoder.java:152)
    at com.collaxa.common.util.LVDecoder.decodeToMap(LVDecoder.java:45)
    at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.loadInvokeMetaData(BaseDeliveryPersi
    r.java:2186)
    at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.__loadInvoke(BaseDeliveryPersistence
    :2112)
    at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.loadInvoke(BaseDeliveryPersistenceAd
    079)
    at com.collaxa.cube.engine.data.DeliveryPersistenceMgr.loadInvoke(DeliveryPersistenceMgr.java:357)
    at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:465)
    at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335)
    at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBe
    java:1796)
    at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHa
    7)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
    at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
    at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
    at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
    at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
    at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    what is the problem? how come i can't initiate the process?
    i will be happy if i could get help..
    thanks in advance

    can you initate the process from the bpel console successfully?
    if so can you use obtunnel from the installation to trace the soap message (that goes over the wire), my best guess in this case is a problem with a header (holding the wsa information) ..
    after starting obtunnel it will liesten to a custom port, and will forward the request to the engine, so you need to point your client to this new port..
    hth clemens

  • Cannot find service {0}. Parameter name: SQLWriter SQL Express 2008 R2 SP2

    Hi, installing SQL Express 2008 R2 SP2 onto Windows Server 2012 R2.   I had previously removed SQL Express 2012 due to failed install due to incompatibility with our SAN.   (I had uninstalled it via Programs & Features,
    and also by following Shanky's tips. http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx).
    This is what's in Detail log: 
    014-10-07 13:12:00 Slp: Parameter 5 : SqlEngineConfigAction_install_confignonrc
    2014-10-07 13:12:00 Slp: Parameter 6 : 0x50806C41
    014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
    2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL
    Server.reg_
    2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    2014-10-07 13:12:02 Slp: Cannot find service {0}.
    The SqlEngineConfigAction_install_confignonrc part is what is in the background before the
    Cannot find service {0}. Parameter name: SQLWriter pops up.
    And in Event Viewer:
    Log Name:      Application
    Source:        Microsoft-Windows-RestartManager
    Date:          10/7/2014 1:11:48 PM
    Event ID:      10010
    Task Category: None
    Level:         Warning
    Keywords:     
    User:          SYSTEM
    Computer:     
    Description:
    Application 'C:\31f53f2e988a36f2c31e\x64\setup100.exe' (pid 688) cannot be restarted - Application SID does not match Conductor SID..
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
        <EventID>10010</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2014-10-07T20:11:48.532980400Z" />
        <EventRecordID>4538</EventRecordID>
        <Correlation />
        <Execution ProcessID="732" ThreadID="2548" />
        <Channel>Application</Channel>
        <Computer></Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <UserData>
        <RmUnsupportedRestartEvent xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
          <RmSessionId>0</RmSessionId>
          <Pid>688</Pid>
          <FullPath>C:\31f53f2e988a36f2c31e\x64\setup100.exe</FullPath>
          <DisplayName>Managed SQL Server Installer</DisplayName>
          <AppVersion>0</AppVersion>
          <AppType>5</AppType>
          <TSSessionId>2</TSSessionId>
          <Status>67108865</Status>
          <Reason>1</Reason>
        </RmUnsupportedRestartEvent>
      </UserData>
    </Event>
    Found one article saying you can get this if previous version not fully removed, and to do a repair of the previous version, but as I said I uninstalled it and followed all steps for cleanup, so nothing to repair. 

    Here is the ERRORLOG file from C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log.  At the bottom I am seeing the error you said before was a SAN issue.  I had hoped that issue was only with
    SQL 2012, but it appears it is even with 2008?
    If that is still the issue, I'm trying to understand if by the articles, if the SAN conflict is an OS issue or an SQL issue?   In other words, is it because the OS is Server 2012?   Or would this still occur if I install SQL
    2008 on Server 2008 R2?    I don't know that they will be willing to upgrade the SAN, and I don't really want to fool with a .VHD (virtual disk) as a workaround speaks of.
    If you're asking if I did this from your article:  select startup account for Database Engine services as NT Authority\SYSTEM 
    , I don't recall what I did this last time.  I was doing that the last few days, but I think I didn't switch it to that once, just to see if I would have success.  I don't know if that was this last time or not when I switched it. 
    Is there anywhere I can check that after the fact?
    014-10-08 12:53:09.84 Server      Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
     Jun 28 2012 08:36:30
     Copyright (c) Microsoft Corporation
     Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    2014-10-08 12:53:09.84 Server      (c) Microsoft Corporation.
    2014-10-08 12:53:09.84 Server      All rights reserved.
    2014-10-08 12:53:09.84 Server      Server process ID is 2640.
    2014-10-08 12:53:09.84 Server      System Manufacturer: 'IBM', System Model: 'IBM System x -[7870AC1]-'.
    2014-10-08 12:53:09.84 Server      Authentication mode is WINDOWS-ONLY.
    2014-10-08 12:53:09.84 Server      Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
    2014-10-08 12:53:09.84 Server      This instance of SQL Server last reported using a process ID of 2848 at 10/8/2014 10:56:44 AM (local) 10/8/2014 5:56:44 PM (UTC). This is an informational message only; no user action is required.
    2014-10-08 12:53:09.84 Server      Registry startup parameters:
      -d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
      -e c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
      -l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    2014-10-08 12:53:09.84 Server      Command Line Startup Parameters:
      -m SqlSetup
      -f
      -Q
      -q SQL_Latin1_General_CP1_CI_AS
      -T 4022
      -T 4010
      -T 3659
      -T 3610
      -T 902
      -d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf
      -l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf
    2014-10-08 12:53:09.86 Server      Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically. 
    After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
    2014-10-08 12:53:09.86 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-10-08 12:53:09.86 Server      Detected 16 CPUs. This is an informational message; no user action is required.
    2014-10-08 12:53:10.00 Server      Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
    2014-10-08 12:53:10.01 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-10-08 12:53:10.01 Server      Lock partitioning is enabled.  This is an informational message only. No user action is required.
    2014-10-08 12:53:10.03 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
    message only. No user action is required.
    2014-10-08 12:53:10.05 Server      Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No
    user action is required.
    2014-10-08 12:53:10.06 spid7s      Warning ******************
    2014-10-08 12:53:10.06 spid7s      SQL Server started in single-user mode. This an informational message only. No user action is required.
    2014-10-08 12:53:10.06 spid7s      Starting up database 'master'.
    2014-10-08 12:53:10.08 spid7s      Error: 5178, Severity: 16, State: 1.
    2014-10-08 12:53:10.08 spid7s      Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
    size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
    2014-10-08 12:53:10.09 spid7s      Error: 5178, Severity: 16, State: 1.
    2014-10-08 12:53:10.09 spid7s      Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
    size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
    2014-10-08 12:53:10.09 spid7s      Error: 5178, Severity: 16, State: 1.
    2014-10-08 12:53:10.09 spid7s      Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
    sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
    2014-10-08 12:53:10.09 spid7s      Error: 5178, Severity: 16, State: 1.
    2014-10-08 12:53:10.09 spid7s      Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
    sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.

  • Not getting Service interface in receiver side

    Hi,
    I am working on a newly configured PI server.
    Here, I am working on a synchronous SOAP to RFC scenario from third party to ISU.
    From the Display WSDL option of ID I have created a wsdl file and testing the scenario by importing wsdl file into SOAP UI. When I am sending some request from SOAP UI , I am getting proper response message ; that's mean interface is working fine and properly hitting the RFC in ISU.
    I can see the message in SXMB_MONI of my PI server . But I am not getting the message in SXMB_MONI of ISU server . Even in SXMB_MONI of ISU I am not getting the inbound service interface also .
    What can be the possible reason . As I am working on a totally new server should I do any configuration in the server to get the SI in receiver side.
    Please help.
    Thanks in advance.

    Hi,
    Please check if Sync logging is enable in ISU. refer the below blog
    XI: I cannot see some of my messages in the SXMB_MONI
    regareds,
    Harish

  • Add Service interface

    Hello folks,
    In PI 7.1 there is a new naming for message interface which is the Service interface.
    When i create a Business service : i can add sender and receiver Service interfaces.
    But if i create a Technical system in SLD and assign Business system to it . I cannot add Sender and Reciever Service interfaces to a Business System ( there is no + or - button to add sender or receiver service interfaces in a Business system).Is this how Business systems work or there is something wrong with the PI system?
    regards

    HI,
    In case of business service you have to manually add the corresponding(inbound/outbound) service interfaces in ID(configuration). Business service has nothing to do with SLD.
    But in case of business system, which you define in SLD, while defining Business system in SLD, you have to add software components(including the one where you have your service interface and other design objects) so when you will go to configuration there your service interface will be automatically listed fron this entry, which you have made in SLD.
    Divyesh Vasani

  • Service Interfaces not showing in the IP when imported in ID in PI7.1

    HI Experts,
         I have developed an Integration process(IP) in ESR using some Service interfaces and Operation mapping for implementing BPM.
    I am trying to import the IP into my Integration Directory. But the imported Integration process(which is now as good as a Business Service) does not show the Interfaces i have used in the BPM in the ESR.
       Without the interfaces being attached to the IP, i cannot create RD and ID's.
    This is the first time BPM is being configured in this server.
    Please guide me if there are any settings specific to ccBPM to be done in ECC.
    Please help me resolve this issue... i am in a crictical condition to meet the deadline..
    Thanx in advance,
    Nandan

    Hi Neetesh,
             Thanx for your reply. If there are any initial settings to be done in PI, please list them so that i can check if they exist in our system.
    Also,when i check(f7) my IP , its showing a message that " Container element my_interface in step Send1 is initialized but is not used ". Is this a concern ?
    I have copy pasted my interface names in the RD and InterfaceDtrmn in my ID and completed the ID part of configuration.When i test the BPM by triggering my Purchase Orders from my sender service,it is showing the following error in moni:
    "<SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack> " in error section and in TRace its showing this error:
    <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
      <Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 70126C4C0C4D0B11E1000000AC113034</Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
    Please suggest how these can be resolved????

  • Error in assining MT to service interface

    Hi PI 7.1 experts,
    i am working on PI 7.1, i have SLD components like this
    Product:                     XYZ
    SWCV                       XYZ       version 1.0
    Product:                     ABC_CANONIC
    SWCV                       ABC_CANONIC      version 1.0
    now i have created some data type and message type in SWCV  ABC_CANONIC   which i want to be reusable
    now i am creating one service interface in  SWCV        XYZ  and assigning message type from SWCV  ABC_CANONIC
    but its giving me error with error text "SINGLE_SWCV_MSG"
    can anybody help me in this regard?
    whats should be the SW compnent strategy?
    Thanks
    sandeep sharma

    The strategy should be that before starting with the IR imports of SWC from SLD, you must decide upon which objects of one SWC could be dependent upon the others. Once done, then you have to define this dependency in SLD itself. After this, the SWCs should be imported in IR and you should proceed with the developments.
    Regards,
    Prateek

Maybe you are looking for