Witch version are there for ppc macar I have problem with my bank swedbank it´s 3.6
Mac G5 dual 2.0
Firefox 4 versions and later do not run on a PowerPC Mac.<br />
Firefox 4 and later require at least an Intel Mac with OS X 10.5
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 7 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html
Similar Messages
-
What workarounds are there for OS X 10.3.9 users on websites with flash?..
What workarounds, kludges are there for users of OS X 10.3.9 encountering websites with the new version of flash?... what alternate ways are there to get the content?
What version of Flash do you have installed? The last version for 10.3 was version 9. If you don't have it, download from http://www.versiontracker.com/dyn/moreinfo/macosx/10752710
The only other option is to upgrade to Tiger 10.4 and use version 10.
Cheers, Tom -
What solutions are there for Adobe Cloud subscribers/designers who are using/have been using Adobe s
What solutions are there for Adobe Cloud subscribers/designers who are using/have been using Adobe software but have run into system requirement inadequacies etc. . . Basically, I have a new mac and CS6 runs fine. But my old macbook can only run CS5.5. Because I'm a subscriber my Adobe CS5.5 updated automatically. What happens when one day a year or two from now (or sooner) my MAC won't support the latest version of my CS subscription? Is there a way for cloud subscribers to subscribe to a legacy or an older version of CS?
Hi Wildeboer420,
Its my understanding that previous versions will still be acessible for users going forward, I copied the following from the FAQ
I am a Creative Cloud member using the CS6 applications included in my membership. Will I lose access to CS6 when CS7 becomes available in Creative Cloud?
No, if you have downloaded and installed the CS6 versions of the applications, you will continue to have access to them without interruption as long as your membership remains active. When the CS7 versions become available, you will have up to a year to download and install them and they will run on your machine along with CS6 versions.
Hope that helps,
-Dave -
I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
I have a presentation to make to a customer and need to know how many educational apps are there for the iPad/iPod? More specifically special education apps.
ThanksKeep in mind as well that not all apps are "created equal". Some are really good, and others are not very good. You might also want to look at some education sites for recommendations. An example of a general iPads in education forum is
http://ipadeducators.ning.com/
but I imagine some exist for special education needs as well. Our healthcare organization is using some apps for working with autistic children and find them very helpful. -
I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?
So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu). -
Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?
haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR -
I have InDesign 3 Version 5.0 for Mac. I have a client with a PC who has either InDesign 6 or CC for PC. If I sell him usage rights to my files, will he be able to use them?
...but from what I have read general practice is to charge extra for native files as you are giving over usage rights of the artwork.
Not a lawyer, just been around the block before. It all sort of depends on the client and understandings on both your parts, whether in writing or not. What is their expectation while they were paying you? What was your expectation during the same period? In lieu of an agreement, I think the courts would side on the client's rights.
But regardless, I generally do what Peter wrote unless there is an agreement in writing stating otherwise. One of the reasons why I happily turn over client work is because sometimes the new-hire or new contractor simply doesn't work out and I am often called back into the mix. It's goodwill.
Mike -
After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found" I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool -
What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ??? thanx..............75 yrs old and still swimmin' upstream.........
from : OS X Beta Seed Program FAQ
How do I get a shipping version of OS X back on my Mac?
To get a shipping release of OS X on your Mac, you can simply install the final version of the software you are testing when it appears in Software Update.
How do I leave the OS X Beta Seed Program?
To leave the program, visit the Leave Program page and follow the instructions to remove your Apple ID and your computers from the OS X Beta Seed Program. This will stop pre-release updates from appearing in the Mac App Store on your computers.
You only need to do more than you already have, if you'd rather not see future pre-release updates. -
I have Mac OS X 10.6.8 (10K549) and there is free update for Maverick will I have problems since there were no free updates prior to this? I just do not want to loose any data. Thank you for your help.
you should always make a backup of data regularly, especially when upgrading to a higher version of OS X. Just because it's free has no bearing on it giving anyone any problems. The only concern you may have is not all older programs will work with 10.9 that do with 10.6. Check here to see if you have any programs that would not run in 10.9: https://tidbits.com/article/12156
-
Are there any billing benefits to have a family shared line?
Are there any billing benefits to have a family shared line? Currently I have a family shared 700 minutes w/ 500 texts. Would it be just as cheap to have to separate lines? I am asking this because I have my bro on my plan and am asking if it is saving me any money . Also why do I have to keep dialing *228 to decent internet connection on my phone. so any time I go anywhere i need to dial x228 to get 3g?
jackscagnetti wrote:
yes he is splitting it in half.
I only get 15% Access Discount & 20% Feature Discount on my line. Which comes out to -$15
I do not get any employee discount on the second line.
so $60-9+29-6=74 for one line not sure about the second line pricing...
Hi jackscagnetti, and thanks to our forum members for the great input on this monthly pricing question.
Using the numbers included on your post it seems like you have a 69.99 calling plan and a $29.99 data plan. Please see break down of fees below and difference between family share plan and individual calling plans.
Current family share plan:
Primary line
$60.00 - Calling plan
$29.99 - Data feature
$89.99 - Subtotal
$09.00 - Credit 15% calling plan
$06.00 - Credit 20% data feature
$74.99 - Total monthly fee for primary line (tax and surcharge not included)
Secondary line
$09.99 - Calling plan
$29.99 - Data feature (if Smartphone on this line)
$39.98 - Total monthly fee for secondary line (tax and surcharge not included)
$114.97 - Total for 2 lines.
2 individual lines with a $39.99 calling plan as used on previous scenarios in this forum/thread.
$39.99 - Calling plan
$29.99 - Data feature
$69.98 - Subtotal
$06.00 - Credit 15% calling plan
$06.00 - Credit 20% data feature
$57.98 - Total monthly fee for primary line (tax and surcharge not included).
$115.96 - Total if system allows employee discount on both lines (tax and surcharge not included).
$127.96 - Total if system allows discount on one line only (tax and surcharge not included). In both scenarios your monthly fees are lower with a Family Share calling plan.
Please keep in mind that we can only review your employee discount specifics if we access your account information. Feel free to contact us at 1-800-922-0204 at your convenience for further assistance with any billing issues and be prepared to provide account verification information. -
I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me
I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow. -
No portal roles are assigned for this user.If this problem persists, contac
I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AMBalu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu
Maybe you are looking for
-
Output type neu not coming automaticaly my document type zcpo contract po
Hi I need output type neu automaticaly for create purchase order document type zcpo,nb,fo, this two condition type coming automaticaly my output type neu, Following configurations i have completed for nb,fo,zcpo document type in Nace t.code In nac
-
Dear all, How can I see Kernel parameters in OS or Database level? Best Regards, Amy
-
So I got a request to pull over 300,000 records today. I would use an employee_id # (aid) to pull their demographic data, but the IN Clause is limited to 1,000 conditions. I would be doing a bunch of copying/pasting, which I don't want to do. So, I w
-
Is it worth shifting an in house SAP HR + EP System as an On Demand service
Please give positive and negative aspects of considering a SAAS model for our established SAP Time, Payroll and Self Services in our mid sized organization. We are at a decision point to consider on demand SAP services instead of upgrading the system
-
Hi, I am trying to set up my new playbook. I have the playbook connected to my belkin router. It started by saying that it would install 503mb of data which would take around 25 minutes. After it had installed almost all of the data (around 493mb