With 6 what are the steps to install Oracle 11gR2?

In public-yum at least there doesn't appear to be any oracle-validated to get the dependencies loaded before trying to install Oracle.
So what is the process with R6U0?

As Avi suggested, following the Oracle installation for OEL 5 is pretty fine - eventhough 11gR2 on OEL6 is not yet cetified.
I just received an exception on the missing package pdksh-5.2.14-30.6.x86_64.rpm. It was not required on OEL5, I'm not a Linux specialist but I have had to take it from OEL4.7, then everything is working fine.
--> From OEL 6.0
rpm -Uvh kernel-headers-2.6.32-71.el6.x86_64.rpm
rpm -Uvh glibc-headers-2.12-1.7.el6.x86_64.rpm
rpm -Uvh glibc-devel-2.12-1.7.el6.x86_64.rpm
rpm -Uvh compat-gcc-34-3.4.6-19.el6.x86_64.rpm
rpm -Uvh libaio-devel-0.3.107-10.el6.x86_64.rpm
rpm -Uvh compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm
rpm -Uvh elfutils-libelf-devel-0.148-1.el6.x86_64.rpm
rpm -Uvh ppl-0.10.2-11.el6.x86_64.rpm
rpm -Uvh cloog-ppl-0.15.7-1.2.el6.x86_64.rpm
rpm -Uvh mpfr-2.4.1-6.el6.x86_64.rpm
rpm -Uvh cpp-4.4.4-13.el6.x86_64.rpm
rpm -Uvh gcc-4.4.4-13.el6.x86_64.rpm
rpm -Uvh libstdc++-devel-4.4.4-13.el6.x86_64.rpm
rpm -Uvh gcc-c++-4.4.4-13.el6.x86_64.rpm
--> From OEL4.7 (Disk1)
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpmNicolas.

Similar Messages

What are the steps to apply Oracle Patch?

What are the steps to apply Oracle Patch?

Hi,
apply patch != apply patchset
Generally, patch is apply with opatch tool (from 9i), and there is an exe for patchset.
But, as it already said, the reading of readme is always a good idea...
Nicolas.

What are the steps to upgrade oracle clusterware from 10.2.0.4 to 11.2.0.2.

We have two node clusterware installed and we want to upgrade the oracle clusterware from 10.2.0.4 to 11.2.0.2 can any one share the steps for upgrade.
Regards
Naveen Dutt

Hi Rajeys,
I read all the documents but i was not able to find the information that i was looking. Below i am providing my cluster node configuration and version -
1) No of Node in cluster - 2 (node1 ,node2)
2) OCR (clusterware) version - 10.2.0.4
3) Storage type - NAS storage (we are not using ASM).
Now link provided by you is to upgrade ASM from 10.2.0.3 to 11GR2 but we are not using ASM as storage we are using NAS storage. Do we have any link or document that help me to upgrade oracle clusterware only without ASM from version 10.2.0.4 to 11.2.0.2 .
Thanks in advance
Regards
Naveen Dutt

What are the steps to install Windows 8.1 on my Macbook Pro w/retina using VMware?

I have never attempted anything like this so I'm being (overly) cautious. I already have vmware installed. Do I need Windows 7? 8.1? 32 or 64 bit? SO many questions and I can't find the answers on Windows or vmware's sites.

There are 2 ways to use Windows with Fusion. You can either install it directly as a Virtual Machine, or you can install it as a Boot Camp parttion and you will have the option of using it with Fusion or booting directy into Windows. I prefer to do it the latter way.
If you install Windows within Fusion directly once you open Fusion
1. Select "New" from the File menu.
2. Double Click on Install from Disk or Image
3. If your using a DVD it will show in the next Window, or if you are using an ISO click on "Use another disc image..." and locate the image
4, Click Continue and then follow the prompts through installation.
If you want to Install Windows via Bootcamp, you should use the Bootcamp assistant. You will need the Windows DVD or disc image, and an 8GB flash drive. Just run the assistant and follow the prompts. Once Windows is installed, run Fusion and then:
1. Select "New" from the File menu.
2. Click on More Options...
3. Click on Install from Boot Camp
4. Click Continue and then follow the prompts to setup your Boot Camp partition to be used in Fusion.

What are the steps for installing applet on real card?

Hi,
It has been a month that I am fighting to install applet on java card and now I am really confused where I am going wrong?
I have 3 sets of cards --
1 ) Gemalto (no specific name known) - ATR is --3B 6D 00 00 80 31 80 65 B0 84 01 00 AC 83 00 90 00
As gemalto customer support doesn't know about this card so I was unable to find its card manager AID. The standard Game expresso card manager AID does not work with this card.
2 ) Pre- Personalized NXP card-- This is JCOP 3.1 complaint pre-personalized card but i am not able to perform Init- Auth using a GPShell script. I have key but some how GPshell script does not work.
3) NXP Smart MX family cards(IBM JCOP v2.2 41) -- These cards are not pre-personalized. So what i am supposed to do with these cards so that they will be pre-personalized?
I will be really thankful for any kind of reply.
Edited by: Amit_D30 on Jul 28, 2008 4:59 AM

Any ways I got rid of this error as my card was supporting mode 201 of GPShell instead of mode_211.
But even with the mode_201 I am getting error as card cryptogram failed.
mode_201
enable_trace
establish_context
card_connect -readerNumber 2
* reader name SCM Microsystems Inc. SCR33x USB Smart Card Reader 0
select -AID a000000003000000
Command --> 00A4040008A000000003000000
Wrapped command --> 00A4040008A000000003000000--
--Response <-- 6F198408A000000003000000A50D9F6E0640513085301A9F6501FF9000
open_sc -security 1 -keyver 0 -mac_key 404142434445464748494A4B4C4D4E4F -enc_key
404142434445464748494A4B4C4D4E4F -kek_key 404142434445464748494A4B4C4D4E4F
Command --> 805000000836DC4EE52137774C00
Wrapped command --> 805000000836DC4EE52137774C00--
--Response <-- 00006257001272910423FF01E2F21D6A304D83EC4EE5060A0A5DC3669000
mutual_authentication() returns 0x80302000 (The verification of the card cryptog
ram failed.)Also I read on java forums that FF01 means I need to use Security 1 and kevar as FF. But I have basic question. The number of retries for authentication for a card are limited. And i have already done it for 5-6 times
So should I try it again or Will my card get blocked? (out of 5-6 tries only one try returned me Card cryptogram failed error in other cases I was getting error as Invalid parameter P1,P2 )

What are the steps to Install adialog instance - Java

I have installed the SCS, database and Central instance. They all work fine. I need to install a dialog instance on another LPAR (AIX).
1) Do I run the install from the server where i want the dialog instance or from the CI Server?
2) Do I need any filesystems mounted from the Central Instance server?
According to the documentation I would say no, but it asks you for the profile directory during the install.
3) Is there anything else I need to do to get the install going?
Once installed do I start it from the CI server using something like startsap all? If so how does the CI know about the DI instance?
Thanks
Paul

Hi Paul,
1) Do I run the install from the server where i want the dialog instance or from the CI Server?
Run install from where you want to install dialog instance.
2) Do I need any filesystems mounted from the Central Instance server?
Yes! mount the profile filesystem.
3) Is there anything else I need to do to get the install going?
Check the installation guide as well as SAP OSS notes.
Once installed do I start it from the CI server using something like startsap all?
You can start java dialog instance from DI server using startsap/stopsap JC<instance number>
Hope this will help.
-Pinkle

What are the steps in oracle 11g DBREFRESH

Dear Techies,
Please help me on below. I followed all steps in db refresh
I have done till
Alter database open resetlogs
status is open
what are the steps remaining in oracle 11g dbrefresh from PRD to QTY. is there any post steps to drop old ops$users.
Please let me know.
Thank you
Best Regards
RJ

Hi Gurpal,
Thank you for your valuable reply
Do I need to do your mentioned steps after below steps
RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL;
AUTO.
once recovery is done CANCEL.
Alter database open resetlogs.
status is open.
AS YOU MENTIONED
Make sure listener and DB should be up.
Determine Schema Owner
SQL> SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'T000';
Check the OWNER of “SAPUSER”
SQL>SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
Create OPS$ User
Use the oradbusr.sql script. This script is attached to the note 50088. The script is valid for Oracle and UNIX. Use the following syntax
SQL> @ORADBUSR.sql SAPR3 UNIX (SID) X
Check the OWNER of “SAPUSER" after exceute command
SQL>SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
If the system returns an owner <owner> other than OPS$<sid>ADM (OPS$SIDADM) of PRD, you must
delete the relevant SAPUSER tables:
SQL> DROP TABLE “OPS$SIDADM".SAPUSER;
and after that check the output of (R3trans -d)
set the value in profile parameter
To ensure no background jobs after the start (Rdisp/wp_no_btc =0)
(Login/no_automatic_user_sapstar =0 )
or Any table spaces need to be create ???? PSAPTEMP ??? or any.
Thanks & Regards
RJ

What are the steps to make it seamless for a customer to use the install program and then use the installed program?

I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67

This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the steps involved in configuring Oracle EBSR12 after installation

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
Thanks,
SR

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
Oracle Applications Documentation
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Setup Exchange2013, with Edge 2010, what are the steps

i want to install exchange 2010 with Edge Role (and typical installation in Exchange2013).
I want that all emails to be received from Edge 2010.
Now, what are the steps after i've finished the default installation:
1. on Exchange2013 create a default send connector to internet through Edge2010 or directo to mx record on internet?
2. On edge2010, will i've to create any default send/receive connector?
3. i've to create edge sync on Edge2010, export it...and import it in Exchange2013, right?
Let me know with full steps, on each of servers.
Regards!
Lasandro Lopez

Hi Lasandro Lopez
Thank you for your question.
Exchange 2010 Edge Transport server expects a connection to a Hub Transport server. In Exchange 2013, the Transport service exists on the Mailbox server. Therefore, Internet mail flow occurs between the Transport service on the Mailbox server and the Edge
Transport server, which effectively bypasses the Exchange 2013 Client Access server.
You can subscribe Exchange 2010 Edge Transport server to an Active Directory site that contains only Exchange 2013 servers. You can import the Edge Subscription file and run EdgeSync on a standalone Exchange 2013 Mailbox server, or on a server where the
Mailbox server and the Client Access server are installed on the same computer. You can't import the Edge Subscription file or run EdgeSync on a standalone Exchange 2013 Client Access server.
The procedures to deploy a new Exchange 2007 or Exchange 2010 Edge Transport server in your Exchange 2013 organization are basically the same as in previous versions of Exchange. However, any procedures that are performed on the Hub Transport server are
performed on the Mailbox server in Exchange 2013.
You can refer to the following link:
http://technet.microsoft.com/en-us/library/jj150569(v=exchg.150).aspx
If there are any questions , please let me know.
Best Regard,
Jim

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

You are allowed to have two activated installations, so if you prefer to you can keep ut on the current machine and just install it on the new one like you did originally. If you wish to eliminate it on the other machine, the first thing to do is to deactivate it by opening a program in the suite and selecting Help -> Deactivate in the top toolbar. That is all you need to do to disable the software. At this point if you prefer to you can uninstall it if you like.
As far as getting it on the new nmachine, as I just indicated, just install it like you did the first time.

I have a macbook with Tiger. What are the steps I need to take to upgrade to Lion and the cloud? I have the Snow leopard disk just received from Apple.

What are the steps I need to take to upgrade my Macbook with Tiger to Lion and the cloud? I have the install disk for Snow Leopard.

Hi Carol, good/sound advice by Ziatron so far.
We need more info about your Mac to see if it will even be capable,
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
You'll need to buy SL/10.6 first & get it to 10.6.8, then get Lion... if you can run it.
Or if you can erase your disk...
http://store.apple.com/us/product/MD256
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Snow Leopard/10.6.x Requirements...
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory, (I say 4GB)
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading, (I say 40GB at least)
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
It looks like Apple will have Lion available on USB drives for $69...
http://store.apple.com/us/product/MD256

What are the steps to be carried out for installing 0cca_cc1 - business

Hi All,
what are the steps to be done for 0cca_cc1 for installation of business content and then how is the data extracted from r/3?
- how to install nor use the standard queries and there are 2 update rules how to activate them too? for 0cca_cc1.
Pls let me know the url for standard datasource for 0cca_cc1
Thanks
Pooja

Goto source system (e.g. R/3). Execute RSA5 transaction.CLick on SAP and press + symbol on the top. then press find to get your datasource. press activate datasource. This will activate your datasource. In RSA6 you will get the activated datasource.
Then in BI side you replicate your datasources and the installed datasource will be visible. Then create the data flow if not installed.
Delta is relatively a big topic. Refer following:
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
What you need to do from your end is create init infopackage, load the data. Once done create delta infopackage and load the data. If you are in 7.x then need to create DTP accordingly.
But just remember the datasource should be delta capable. In infopackage when you get only full option then you can say the datasource is not delta capable.
Edited by: Shailesh Naik on May 11, 2009 11:08 AM

How do I unlock an iphone 5 with Sprint. The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

There is no such thing as an unlock code. Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
iPhone: About unlocking

What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

With 6 what are the steps to install Oracle 11gR2?

Similar Messages

Maybe you are looking for