With a high volume of tabs, scrolling to the end of the tab list often resets to the first tab
Firefox 34.0.5
When using a large number of tabs, around 300 inactive and 30 active tabs, when the currently selected tab is a tab on the far left side of the tab bar, attempting to scroll to the end (far right) side of the tab bar will often cause scrolling to freeze momentarily, and then reset to far left, to the currently selected tab, and continues scrolling from the beginning of the tab bar, making it unnecessarily difficult to scroll to the end of a long tabs bar.
This occurs when scrolling up/down with the scroll-wheel on a mouse, when scrolling up/down/left/right on a touchpad, and when scrolling using the left and right scroll buttons in the tab bar.
hello kirbysama, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
Similar Messages
-
The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?
I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).
-
Order related billing of services with very high volumes
Hi,
does anyone has experience with very large invoices? We already have large invoices in SD (up to 42.000 items) and this works fine. Due to business requirements this number will increase. We calculated the following volumes for the future:
max. # of invoice items per invoice: 250.000
total # of invoice items per month: 27.000.000
total # of invoices per month: 40.000
We assume that we will run into problems with this volume, so it would be nice if anyone else has done this before so that we can share the experiences.
Best regards
Hans SchmillHi,
Just be careful with your Invoice number range
Rest hope for the best
Regards,
Amrish Purohit -
I have a web page http://www.yellowpagescr.com/index2.php that includes jquiry TABS. I want to have 4 tabs each with a FORM PROTECTED BY CAPTCHA. The first TAB 2 (free Ad) worked fine. When I added the second the CAPTHA form did not display. I added a third and it also would not display. Is it possible to have have multiple forms on the same page, but on different TABS?
I don't use Captchas because they are not web friendly. Humans have a hard time reading them which often leads to form submission failures and frustration. I much prefer the Honeypot (hidden input field) method. It traps spam bots who cannot resist filling in fields because they don't use CSS or JavaScript. If the hidden field contains any characters, your form processing script can be set-up to flag that as spam and abort the submission. Humans never see the hidden field, so it works seamlessly behind the scenes. There's no limit on how many hidden form fields you can have on a page.
Nancy O. -
The first error is "An unhandled Win32 exception occurred in Acrobat.exe [4644]"
A debug window comes up after this and I open Visual Studio (not my area of expertise), and a couple more messages come up that may be helpful.
Unhandled exception at 0x625628db in Acrobat.exe: 0xC0000005: Access violation reading location 0x00000044.
Then
[Frames below may be incorrect and/or missing, no symbols loaded for AcroForm.api]
This is on Windows 7, running Acrobat Pro version 9.5.5
No new updates are available either.
Any ideas where to start? This happens with a couple of documents, but not all that are being edited.I am also getting the same error for fill-able PDFs. Were you able to find an answer/solution for this problem?
I am using Acrobat X Pro on Windows 7
Any help would be appreciated.. -
I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter -
Form with six field types. Firefox sends only the first type. Safari sends all.
I use Ancestry.com. The 'advanced search' form has six data types - name, location, family member, etc, which are 'and'ed together. Starting about two weeks ago, the search function returned data from only the first data type, that is, if name and location are filled in, only name is returned; if location and family member are filled in, only location is returned. I am using a MacBook Pro running Yosemite. Firefox is version 33. Safari works without a problem but I prefer Firefox.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Purchased entire album. Songs available only with album purchase show completed download with album, but play only a short demo of song (both PC and iPod). This is my first iTunes purchase so I likely missed a step. Is this a user of iStore error? Solution(s)?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
Over the period of a day or three the tab bar stops responding to attempts to scroll the tab bar. I can still advance through the tabs with ctrl-tab and shift-ctrl-tab but the tab scroll arrows either don't work at all or work erratically.
A "solution" that requires restarting the program is not a solution at all. This is a bug in Firefox - once you have enough tabs open, tab scrolling becomes unresponsive, and tabs at the far right and left cannot be tabbed to at all. It is also not a solution to open less tabs; if I want 50 tabs open, and work best that way, then FF should permit that. It does not do so now.
Thanks. -
First of all, it wasn't letting me post in the App store section, so this is my best bet. Basically the title says it all I went to download Infinity blade which update its icon upon the release of ios7 to look like this
But, Once downloaded it looked like this.
I don't want to download the app again if it can be helped as my Internet connection is terrible. But I've seen this happen many time within the app store itself, showing the old app icons with the transparent glow overlayedYou've been hitten by Apple's recent SNAFU. I fear you are SoL until their pending investigation fiasco is over with.
-
I have had our media company to see what the problem is a few times but with no success. Anyone able to assist or direct me so that I can once again use my Apple TV?
I would grab a micro usb cable and restore in iTunes. Or you can take it in to a local Apple store/reseller.
http://support.apple.com/kb/HT4367 -
Hello Community,
I am trying to start a high volume campaign with the Marketing Manager role but it wont work. I start by setting up a segmentation model with usage "High Volume Segmentation" and start to define my target group with the modeler. After i save everything and turn back to the initial Campaign editing screen, to start the Campaign, the Job is scheduled and directly canceled. When I click on the Job Status link (which is "Job canceled") in the Column "Job Status" I get the Job overview. The Error Message I get is
Renumbering of target groups failed
This Error Message only appears, when I want to create a High Volume Segmentation. Ordinary Campaigns, without the new modeler, are running trough without any problems.
I am really struggling with this Error and it is driving me crazy! Can anyone help me?
Thank you very much in advance!
Greetz
OleHello Willie,
the only error message I get is "Renumbering of target groups failed". In the Execution Monitor the Systems gives the following feedback:
(ok checkbox) High-volume execution job created; job name = JOBNAME123 = 17220900 user = XYZ123
(error checkbox) Renumbering of target groups failed
(ok checkbox) High-volume marketing execution job status set to 'Canceled'
Do you know if I can have a more detailed look at this job in SAP CRM? I might be able to give some more information on this error message if I can have "a look behind the scenes".
Thanks
Regards,
Ole -
JLabel with HTML visible only for the first time
I've implemented a really simple applet:
public class TestApplet extends JApplet {
@Override
public void init() {
try {
SwingUtilities.invokeAndWait(new Runnable() {
public void run() {
JPanel topPanel = new JPanel();
topPanel.setLayout(new BorderLayout());
getContentPane().add(topPanel);
JLabel labelHello = new JLabel("<html>Hello World!</html>");
topPanel.add(labelHello, BorderLayout.NORTH);
JLabel labelHelloNoHTML = new JLabel("Hello World - without html!");
topPanel.add(labelHelloNoHTML, BorderLayout.SOUTH);
} catch (Exception e) {
System.err.println("Couldn't initialize GUI");
}And there are two html pages, both having the same applet and a link referring to each other:
index.html
<html>
<head><title>Applet</title></head>
<body>
<div><a href="link.html">Link</a></div>
<div>
<applet hspace="0" height="375" align="left" width="600" vspace="0" mayscript="" alt="GetJava" codebase="./"
code="com.test.TestApplet" name="TestApplet"></applet>
</div>
</body>
</html>link.html
<html>
<head><title>Applet</title></head>
<body>
<div><a href="index.html">Link</a></div>
<div>
<applet hspace="0" height="375" align="left" width="600" vspace="0" mayscript="" alt="GetJava" codebase="./"
code="com.test.TestApplet" name="TestApplet"></applet>
</div>
</body>
</html>Now when I navigate to index.html the applet shows correctly both labels but in case I jump to link.html the applet shows only the second label i.e. Hello World - without html! . This seems to be specific to Java version 1.6.0_21 and 1.6.0_22, it was working properly in 1.6.0_17. Is anyone else experiencing similar issue or am I missing something?
Edited by: user13135196 on Nov 25, 2010 4:33 AM
Edited by: Slavek Tecl on 25.11.2010 13:12I am having this exact same issue. I have a JLabel with <html> for superscript in my JApplet. The first time I run my applet it displays fine. All subsequent times (refresh the page, or close the tab then open again) the JLabel with <html> doesn't show. This issue does NOT occur in the Eclipse Applet Viewer, but does occur with Google Chrome9 and IE8.
I spent forever checking my methods and changing things trying to figure out why all the other labels show. Never would have guessed <html> in a JLabel would make it not display. This is terrible bug. Please fix ASAP. -
Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last few months, I have used it with Mac OS X Mavericks. There was no problem. Some days ago, I downgrade to Mac OS X 10.8.3, because I was fed up with different bugs in 10.9. Anyway, the first two days the connection were fine. But, after that, The problem began from no where. I tryed everything i could, but, It didn't help.
Please, help me out. It's very disturbing frequanlty disconnection. I am mad at the PPP is like, if I found standing it in front of me, I would beat it with a bat, who gave this so called Mr. PPP permission to disconnect my connection as it's wish!Hi I'm having same issue since last week and now unable to reconnect. Not sure if it's an issue with the mobile company, modem or apple .
Before was able to connect eventually now connects and drops connection after 3 seconds . Using macbookpro early 2014 mavericks all ipdate - modem 4G Huawei
Haven't found any info to assist us
Hope someone comes forward soon
Thanks and good luck ! -
How to fix the first field or column in classical report while scrolling
i want to know, how to fix the first field or column in classical report while scrolling
horizontally. the first should be constant when i scroll the report horizontally .
please help me.
it's urgent.Hi,
Suppose your first field is itab-matnr.
WRITE :/ itab-matnr.
SET LEFT SCROLL-BOUNDARY.
WRITE :/......."Remianing fields
Maybe you are looking for
-
Issue with setting an Action Listener for a Command Button
Hi all, I'm trying to set an action listener for a CoreCommanButton in a backing bean. Here's my code: CoreCommandButton editBtn = new CoreCommandButton(); MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMet
-
Dynamic variables: SELECTION-SCREEN PUSHBUTTON
hi, how I can create 100 buttons on a cycle so dynamic? example: SELECTION-SCREEN BEGIN OF LINE. SELECTION-SCREEN PUSHBUTTON (4) TEXT-001 USER-COMMAND but1. SELECTION-SCREEN PUSHBUTTON (4) TEXT-002 USER-COMMAND but2. SELECTION-SCREEN
-
Before and when the Cloud started, Itunes still downloaded shows automatically or when I went to "Check for Available Downloads" and then it downloaded. Then I only got an email notice, but at least I was able to download from my Itunes, in the lists
-
Enhancement request on remote block record access
Writing code in forms to deal with information in "detail" tables, i.e. potentially multirecord tables with a probable foreign key relationship to some table or field elsewhere iin the form, is a bit problematic currently. As far as I know the only w
-
Hello. It seems the main storage memory in my phone is jammed up with something and I'm unable to use certain functions. I have cleared out all of the excess items in the phone, but still showing only 3.42Mb of storage left. I have no pictures sav