With out selecting the Row, display Dropdown for a perticular column

Hi,
i have a requirement to display dropdown to perticular column in a Tableview.
is it posible.....?
Regards,
Brahmaji

Hi,
The value of the TextEdit inside a Tableview, can be got by using the same method that you use it outside the tableview.
If you know the id of the Textview, then you could get the data inside the textview easily.
All the form fileds will be stored in form_fields table that is stored in the request object.
This also implies that the textedit value will also be stored inside the form_fields array.
The textedit value can be read from this internal table using the below syntax.
The syntax for reading the textedit value is below...
data: lv_string type string,
         lv_te_iid type string.
lv_te = 'te1'.
lv_string = request->get_form_field( NAME =  lv_te ).
The id of the textedit should be assigned  by you, during the factory method. Say for example te_1_1 i.e. te_<row_number>_<column_no>
Later in the event handler based on the no. of questions, you could loop and form the id of the text_edit and get the value of the text edit and store the value of the textEdit in the internal table based on the row index.
Hope it helps.!
Regards,
Maheswaran
Edited by: Maheswaran B on Nov 6, 2009 10:00 PM
Edited by: Maheswaran B on Nov 6, 2009 10:02 PM

Similar Messages

  • How can i get all values from jtable with out selecting?

    i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
    Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
    thanks in advance.
    raja

    You could set the table's data model to be the same:
    output2.setModel( output1.getModel() );

  • How can I modify the Contacts Template to display additional fields with out selecting "add field" everytime?

    How can I modify the contacts template in either iCloud, my iPhone, or my iPad to display additional fields that I always use ... example: How can I get Job Title to always be a fillable field with out selecting "add field" everytime?

    Let the HairSalon implement the java.lang.Comparable interface. You'll need to write code for
    public int compareTo(Object o1, Object o2)
    The compare method would cast the Objects to HairSalons and return the difference in price.
    Then use java.util.Arrays.sort(Object []);

  • How to skip a selection screen mandatory field in debugging mode with out changing the code?

    Hi Team,
    In my report there is two fields on selection screen, one is obligatory field , but i just want to execute the report(for testing per pus) with out entering  the data for the mandatory field with out changing the code. could u let me know which event and how to debug the report. or else  in debugging mode how can i change that field as non mandatory field.
    Regards,
    Venkat.

    If the value is not of importance how come it became obligatory in your program?
    Any how you can do one thing...Put some value in your obligatory field, put a debugger point where you are interested in  and use the pencil tool to change the value of the field while debugging. 
    Regards,
    Philip.

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

  • How to display the alv report blocks wise with out using the blocked alv

    Hi
    How to display the alv report with out using the blocked alv function module.
    Thanks
    Chinnu

    see this Standard Program
    RPR_ABAP_SOURCE_SCAN

  • Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)

    Sometimes when i get out of the full screen option for a microsoft word document i lose my main toolbar (the toolbar with the minimize and escape buttons, etc. etc.)??

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • I accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

    i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

    i accidentally deleted the admin user and it wiped out everything, luckily it wasn't much, but is my computer going to be completely overloaded with data from the last user? for example, i had to redownload microsoft 2011 do i have little space now?

  • Urgent :  how to select the rows in the ALV Grid Control

    How to select the rows in the ALV Grid control,
    I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
    If anyone have the solution please help me out
    <b>Its very Urgent</b>

    Hi Bharath,
    Go through this hope u can understand.
    SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
    A Multiple columns, multiple rows with selection buttons.
    B Simple selection, listbox, Single row/column
    C Multiple rows without buttons
    D Multiple rows with buttons and select all ICON
    Setting and getting selected rows (Columns) and read line contents
    You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
    Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
    Data declaration:
    DATA:
    Internal table for indexes of selected rows
    gi_index_rows TYPE lvc_t_row,
    Information about 1 row
    g_selected_row LIKE lvc_s_row.
    Example 1: Reading index of selected row(s) and using it to read the grid table
      CALL METHOD go_grid->get_selected_rows
        IMPORTING
          et_index_rows = gi_index_rows.
      DESCRIBE TABLE gi_index_rows LINES l_lines.
      IF l_lines = 0.
        CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
             EXPORTING
                  textline1 = 'You must choose a valid line'.
        EXIT.
      ENDIF.
      LOOP AT gi_index_rows INTO g_selected_row.
         READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
        ENDIF.
      ENDLOOP.
    Example 2: Set selected row(s).
      DESCRIBE TABLE gi_index_rows LINES l_lines.
      IF l_lines > 0.
        CALL METHOD go_grid->set_selected_rows
            exporting
              it_index_rows = gi_index_rows.
      ENDIF.
    Reward points if helpful.
    Thanks
    Naveen khan

  • How can I select the row after a cfgrid refresh?

    I have a form that is bound to a cfgrid.  The grid is populated from a database.  When you navigate in the grid the data displayed in the form changes to match the selected row.  I can edit the data in the form and update the database.  After updating the data I refresh the cfgrid, which then displays the updated data.
    Unfortunately the cfgrid always highlights the first row, row 0, after a refresh.  I want to highlight the same row that was highlighted when the data was edited and saved.  Can anyone advise as to how I can do that?
    I have tried setting a listener when the grid is initiated that responds whenever the store is refreshed and triggers the function refreshSelection():
    g.getStore().on('load', refreshSelection) ;
    Before the form data is saved, the row number is stored in selectedRow[0].  When the grid is refreshed, refreshSelection is run:
    function refreshSelection() {
    if (0 >= selectedRecords.length)
         return;
    alert('Selected row is Row ' + selectedRecords[0] ) ;
    g.getSelectionModel().selectRow(selectedRecords[0]) ;
    selectedRecords[0] = 0 ;
    The alert shows the correct row number each time, but highlighting the last row viewed works intermittently, and only if the alert line is active.  If I comment out the alert, this fails every time, with row 0 being highlighted.  selectedRecords[0] is reset to 0 after the attempt to select the row so that navigation through the grid, such as choosing "Next Page," will properly highlight the first row of the page rather than the last row number that was edited.
    -Rick

    Massage?
    Why not ask the masseuse who gave you the massage?

  • Out of the box execution plan for Payables EBS 11.5.10

    Has anyone else experienced performance issues with the out of the box execution plan for the Payables subject area for Oracle EBS 11.5.10? Our incremental ETL for this particular subject area is taking 8+ hours. I understand that there are several factors involved with performance and that there are a lot of AP transactions, but this is ridiculous for a nightly incremental ETL job.
    In particular it is the SDE_ORA_APTransactionFact_Payment task that is taking forever. This query appears to have extremely high cost (see explain plan below). Has anyone been successful in rewriting or changing this query?
    SELECT STATEMENT  ALL_ROWSCost: 586,953  Bytes: 16,550  Cardinality: 50                                                                         
                13 NESTED LOOPS OUTER  Cost: 586,953  Bytes: 16,550  Cardinality: 50                                                         
                            10 NESTED LOOPS  Cost: 586,952  Bytes: 15,800  Cardinality: 50                                             
                                        7 HASH JOIN  Cost: 468,320  Bytes: 11,693,526  Cardinality: 59,358                               
                                                    5 HASH JOIN  Cost: 429,964  Bytes: 9,200,490  Cardinality: 59,358                     
                                                                3 HASH JOIN  Cost: 366,009  Bytes: 7,740,544  Cardinality: 60,473         
                                                                            1 TABLE ACCESS FULL TABLE AP.AP_AE_LINES_ALL Cost: 273,240  Bytes: 15,212,604  Cardinality: 230,494 
                                                                            2 TABLE ACCESS FULL TABLE AP.AP_INVOICE_PAYMENTS_ALL Cost: 45,211  Bytes: 715,512,860  Cardinality: 11,540,530 
                                                                4 TABLE ACCESS FULL TABLE AP.AP_PAYMENT_SCHEDULES_ALL Cost: 39,003  Bytes: 309,648,420  Cardinality: 11,468,460       
                                                    6 TABLE ACCESS FULL TABLE AP.AP_CHECKS_ALL Cost: 28,675  Bytes: 130,126,920  Cardinality: 3,098,260               
                                        9 TABLE ACCESS BY INDEX ROWID TABLE AP.AP_INVOICES_ALL Cost: 2  Bytes: 119  Cardinality: 1                                 
                                                    8 INDEX UNIQUE SCAN INDEX (UNIQUE) AP.AP_INVOICES_U1 Cost: 1  Cardinality: 1             
                            12 TABLE ACCESS BY INDEX ROWID TABLE PO.PO_HEADERS_ALL Cost: 1  Bytes: 15  Cardinality: 1                                                 
                                        11 INDEX UNIQUE SCAN INDEX (UNIQUE) PO.PO_HEADERS_U1 Cost: 1  Cardinality: 1                       

    Hi Srini, All,
    Thanks for the reply.
    The payables documentation (i.e. User Guide) discusses about options that could be used in implementing EFT. However, if possible, we would like suggestions on what would be the better ways to implement EFT (US bank) using either XML or text formats. We would also prefer not using e-commerce gateway or EDI.
    Thanks in advance.
    MM

  • Problem in importing Sales Order with udf in the rows

    Dear All,
    I am having problem in importing Sales Order with udf in the rows. I mean it is getting imported but the udf values in the rows is not getting updated. But the udf values in the header is getting updated. I am using SAP 8.8 Pl 10.
    Can anyone guide me what to do in this scenario?
    Regards,
    Gary

    So , Login to DTW .
    with the Desired Database and Login Credentials.
    Goto - > Templates - > Customized Templates
    Select The Object .
    Right Click on the object needed and choose Create Template for the Structure .
    Then use this template for import .
    Hope it helps
    Thanks
    Ashish Ranjan

  • How to get iterator with out dragging the table?

    Hi,
    Kindly help me out in getting the iterator for a view object with out dragging it on to the JSF page.
    Can we create bindings in the binding container with out dragging the table on to page.
    Kindly come up with suggestions.
    Thanks,
    Phani

    if i understud correclty. follow this
    public String getit58Value() {
    try
    if(!this.isEmptyDescr())
    DCBindingContainer dcBindings = (DCBindingContainer)getBindings();
    DCIteratorBinding dcIterator = dcBindings.findIteratorBinding("CrmCntrl2View1Iterator"); // r u meaning something like this. // am accessing without drop in jspx page
    System.out.println(""+dcBindings.getIterBindings());
    Row row = dcIterator.getCurrentRow();
    this.setEmptyDescr(false);
    System.out.println(""+row.getAttribute("BuDesc"));
    return (String)row.getAttribute("BuDesc");
    and another one .
    pagedef file . in bindings.
    we can create bindings as we need.
    but one suggestion. by default adf tak care its bindings . so time to ask what is usecase?

  • HT5312 What if I forgot my rescue email? I got locked out of the Password & Security section for trying my questions too many times.

    I got locked out of the Password & Security section for trying my questions too many times. I was just trying to buy an app and it completely locked me out. Do I have to call iTunes?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • Data filtering in XML report with out changing the underlying query

    Hi, This is Nagesh and from Verizon.
    I'm testing Query based XML report in Peoplesoft 9.1 app with tools version 8.5.
    I'm trying to filter the data on XML Report template with out changing the underlying PS query. I mean filter the data on the report to only specific accounts though the underlying PS query query return transactions booked to all Accounts for a given Legal Entity. Is it possible. any advise or idea is highly appreciated.
    Thanks
    Ages

    If the value is not of importance how come it became obligatory in your program?
    Any how you can do one thing...Put some value in your obligatory field, put a debugger point where you are interested in  and use the pencil tool to change the value of the field while debugging. 
    Regards,
    Philip.

Maybe you are looking for