Witholding tax rates
Dear All,
How do we change the applicable rate of witholding tax to a existing vendor if there is a change in the tax rates at Macro level.
Kindly give solution.
Thanks
Dear,
be aware that:
SAP provides with the report RFWT0010, just is case the WT type should change.
If I understand well Your question, You're talikng about to change the rate that is defined into the WT codes.
Unfortunately RFWT0010 is not designed to change withholding tax code.
The only thing you can do for open items is to define a new combination
of withholding tax type and withholding tax code in the vendor master
data (instead of a new w/tax code) and run report RFWT0010 afterwards.
However, in open items, it should be possible to change the w/tax code
using transaction FB02 for invoices.
I hope this helps You.
Mauri
Similar Messages
-
Hi,
In ECC 6.00
Can I get the following result in FB60:
Gross: Rs.1000
Witholding Tax rate: 10%
T.Code: FB60
Expenditure Dr 1000
Vendor Cr 1000
Vendor Dr 100
TDS Payable Cr 100
At present I am getting the result as when I configured GL Account(gross up offsetting a/c) in OBWU
Expenditure A/c Dr 1000
Vendor A/c Cr 1000
G/L Account(gross up offsetting a/c)Dr 100
TDS Payable A/c Cr 100
Instead of getting debit to G/L Account (gross up offsetting a/c) which is wrong, I want debit to Vendor account. Can I get it?
Kindly advise.
Aravind BoddupalliH
The above requirement is required for the following reasons please.
1. If vendor submits bill for Rs.10,000 after certain period if I see the vendor account we can see only net value and not gross value. If we want to know the details we need to go to the details of the document.
2. Usually auditors insist on report of turnover of more than Rs.5 Lakh of vendor.
3. In case of Purchases are more than Rs.10Lakh service tax is to be deducted from vendor and paid to govt.
For the above reasons the above requirement is needed.
Aravind Boddupalli -
Extended Withholding Tax Rate change at invoice Level
Hello Every One
We are implementing Extended Witholding TAx in US.
How can i achieve Below
Requirement 1:
At the time of invoice the business want to override the Tax rate, but i am not sure how it will happen since tax rate % is defined in tax codes and tax codes are assigned in the vendor master? The reason for this is that if one vendor has existence in two different countries then our company will with held tax at different rate.
My Solution: I will define one tax code with 100% rate and then if the that vendor has to be deducted at 30% rate. Then in the vendor master in the exemption % field they can put 70%, so at the time of invoice it will be calculated 30%, but the draw back of this is that it has to be maintained by the master data team and the invoice clerk cannot do it right away if the requirement gets changed. (if someone has other than this please let me know)
Requirement 2:
How we can with hold tax at line item level, is it possible?
for example if we receive an invoice from a vendor for 2000$. Out of 2000$ $1200 is belong to service which is taxable and 800$ is belong Material which is not taxable.
Requirement 3.
What will be the configuration setups of with holding tax account in FS03
Best RegardsRefer the sdn thread posted on similar issue
Please search in sdn before posting .
[SDN URL|Set exchange rate indicator in billing; -
Dear All,
While doing entry in FBCJ for business transaction type vendor payment i am getting the following error.
"Witholding TAX information missing from line item" Message No:7Q301.
Also on F-47 i am getting the same error.
I have maintained Withholding tax details in vendor master.
Kindly guide me.
GirijaHi Gurus,
I am having the same issue.
My client will give the advances to vendors and they will deduct in instalment basis.
The problem is at the time of advance payment tds is deducted at 2% Now the currrent rate is 3%.
I changed the tax code in vendor master and posted invoices, Whenever i am going to clear the invoice it is given error Withholding tax incosistancy.
I execueted RFwt010 program Now i am able to adjust the advance.
But it is not allowing to reverse the TDS.
Regards,
Prasad. -
Witholding Tax on Rebate Credit Memo
Hello SD gurus,
Anyone has an idea on how I could deduct witholding tax on my rebate settlement credit memo?
Thanks in advance.
RoseHi Rose
I think it should be possible although I have configured Withholding Tax for incoming payments (and it is working the way I want it to in F-28) but not for Rebate Credit Memos.
Configuration of withholding taxes is in the FI Consultant's domain although the SD Consultant needs to do some configuration from his side. Broadly, you need to assign the Withholding Tax Codes and Withholding Tax types in the Withholding Tax Tab of the Customer Master; assign Requirement No: 83 against the Withholding Tax Condition Type in V/08 and maintain Condition Records in VK11. The actual Withholding Tax rate flows from the FI side settings. (more specifically on the Rate you maintain in the 'Define Withholding Tax Code' - Financial Accounting New --> Withholding Tax --> Extended Withholding Tax --> Calcualtion --> Define Withholding Tax Codes).
You may want to ask your FI Consultant to have a close look on the documentation in the Withholding Tax menu under Financial Accounting Global Settings (New).
Regards
Ramana ND -
Hello Experts,
Can any one explain or send docs for Configuration of witholding tax configuration for Customers
[email protected]Configuration Guide
1 Overview
This configuration guide provides the information you need to set up the configuration for withholding tax under Financial Accounting. It covers configuration relating, classic withholding tax, extended withholding tax.
2 Configuration
2.1 Organization structure
2.1.1 Organization Setup Step
N.A
2.1.1.1 Use
N.A
2.1.1.2 Prerequisites
N.A
2.1.1.3 Procedure
1. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu <IMG Menu path>
2. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
- In above table enter the field name, description, and usage of every relevant field.
- In the table below, list down all the actual values set up in the client. Add or delete columns as necessary.
<Field -1> <Field -2> <Field -3> <Field -4>
Value 1-1 Value 2-1 Value 3-1 Value 4-1
2.2 Process Configuration for withholding Tax
The following are the configuration steps for Withholding tax.
2.2.1 Classic withholding Tax
Maintain Countries
Maintain Types of Recipient
Define Income Types
Maintain Tax Codes
Define Form Names for Extended Reporting
Define Output Groups
2.2.1.1 Maintain Countries
The withholding tax country is needed for printing the withholding tax form. Since the list of country IDs prescribed by law is different from the list in the system, you have to define the withholding tax countries again.
2.2.1.1.1 Use
Used For printing the withholding tax forms.
2.2.1.1.2 Prerequisites
N.A
2.2.1.1.3 Procedure
3. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings Maintain Countries
4. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Withholding tax country An additional country is needed for calculating or reporting withholding tax.
Description Text of country
2.2.1.2 Maintain Types of Recipient
The type of recipient categorizes the vendor, which is necessary for printing the withholding tax form.
2.2.1.2.1 Use
Used For printing the withholding tax forms.
2.2.1.2.2 Prerequisites
N.A
2.2.1.2.3 Procedure
5. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings  Maintain Types of Recipient
6. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Rec. Type Type of recipient"
Description Description of recipient type
2.2.1.3 Define Income Types
The income type is a classification of your (foreign) vendors according to income.
2.2.1.3.1 Use
You need the income type as a specification for the withholding tax return...
2.2.1.3.2 Prerequisites
N.A
2.2.1.3.3 Procedure
7. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Basic Settings  Define Income Types
8. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Income type Type of income subject to withholding tax
Text Description of income type
2.2.1.4 Maintain Tax Codes
The income type is a classification of your (foreign) vendors according to income.
2.2.1.4.1 Use
You need the income type as a specification for the withholding tax return...
2.2.1.4.2 Prerequisites
N.A
2.2.1.4.3 Procedure
9. Access the activity using the following navigation options:
Transaction Code OBC7
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Calculation Maintain Tax Codes
10. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
W.tax code The tax codes are unique per country
Description Text of the tax code
Off.w. tax .code Key which is used for withholding tax reporting on official forms.
Percentage subject to tax Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code
Net base for tax contributions Indicator that the taxes on sales/purchases are not used in the base amount for withholding tax.
Currency Currency of the minimum amount defined for the withholding tax report
Minimum Amount Field used define minimum tax it is used for Japan only N.A
Withholding tax rate Percentage rate used in conjunction with the withholding tax base amount to calculate the withholding tax amount
Reduced Rate Percentage rate which is to be used for the withholding tax base amount if there is a valid exemption certificate, to calculate the withholding tax amount
Withh. tax formula withholding tax is to be calculated according to a special procedure
Germ. reunification tax German Reunification Tax for the Withholding Tax N.A
Posting with payment The payment amount is reduced by the withholding tax amount posted
Region The region forms part of the address
Provincal tax code Together with the country key, the region and the withholding tax class,the fiscal province code defines a reporting key that is required for reporting withholding tax (DME) and by the tax authorities (Spain). N.A
Income type Type of income subject to withholding tax
2.2.1.5 Define Accounts for Withholding Tax
You define the account numbers of your withholding tax accounts. The system posts the tax amount to these accounts when clearing open items.
2.2.1.5.1 Use
Used for document posting in FI.
2.2.1.5.2 Prerequisites
N.A
2.2.1.5.3 Procedure
11. Access the activity using the following navigation options:
Transaction Code OBYS
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Postings Define Accounts for Withholding Tax
12. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction QST The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Tax code used to differentiate account determination
Account GL account no.
2.2.1.6 Define Form Names for Extended Reporting
You define the names of the forms for the withholding tax return to your vendors.
2.2.1.6.1 Use
You can use the form ID to define country-specific forms.
2.2.1.6.2 Prerequisites
Form should be there
Company code
2.2.1.6.3 Procedure
13. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Reporting Define Form Names for Extended Reporting
14. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Program name The name of the program you want to edit
Company code The company code is an organizational unit within financial accounting.
Form ID The identification for a form or a form set enables you to access a particular form or set of forms from a selected group of forms
Form Form which is to be displayed
2.2.1.7 Define Output Groups
You define the combination of outputs which is required for a given data source
You would define two output groups in Customizing:
One to define the data selection (accounts payable, etc.) and the form and file to be used.
One to define a data selection (accounts receivable, etc.) and the list to be used.
2.2.1.7.1 Use
You can for different reporting purpose..
2.2.1.7.2 Prerequisites
Form
DME Engine
2.2.1.7.3 Procedure
15. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Generic Withholding Tax Reporting Define Output Groups
16. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Process Type type of process that will be triggered by the program
Output Group Indicates the output group as used in withholding tax reporting. An output group is the combination of outputs which is required for a given data .
Customizing view withholding tax scheme in your country
Reported doc. You can choose in which context the withholding tax data is to be displayed
Open items selecting this option will allow you to see also the open items
Group item according to fiscal year items belonging to vendor/customer B are listed together with items of vendor/customer A if A is specified as fiscal address of B.
No exemptn data Excludes data relating to withholding tax exemption
No tax data Excludes data relating to taxes on sales/purchases
Title of output list focused on The output list is divided into four sections, covering Various information
Form printing Description for printing form
DME File Using this parameter, you can control whether the data medium exchange should be carried out to a temporary sequential file
Format tree Used together with the DMEE tree type to uniquely identify a format tree
Tax Ref.1 There is a parameter type for every additional parameter for a company code
Tax Ref.2 There is a parameter type for every additional parameter for a company code
User Program Your report should contain a form
2.2.2 Extended withholding Tax
Withholding tax Country
Extended withholding tax Malaysia, Singapore, Brunei, Nepal ,Thailand
Check Withholding Tax Countries
Define Withholding Tax Codes
Check Recipient Types
Define Income Types
Define Withholding Tax Type for Invoice Posting
Define Withholding Tax Type for Payment Posting
Define Rounding Rule for Withholding Tax Type
Define Withholding Tax Codes
Define Formulas for Calculating Withholding Tax
Portray Dependencies Between Withholding Tax Types
Define Min/Max Amounts for Withholding Tax Codes
Assign Withholding Tax Types to Company Codes
Activate Extended Withholding Tax
Define Accounts for Withholding Tax to be Paid Over
Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
Define Accounts for Self-Withholding Tax
Define Accounts for Withholding Tax Offsetting Entry
Define Numbering Classes
Define Numbering Groups
Define Number Ranges
Assign Numbering Group to Numbering Class
Assign Numbering Group to Numbering Class
Numbering Concept Option 1: Assign Numbering Class
Numbering Concept 4: Assign Numbering Group
Assign Forms for Withholding Tax Certificates
Define Minimum Amounts per Withholding Tax Code
Define Output Groups
2.2.2.1 Check Withholding Tax Countries
The withholding tax country is needed for printing the withholding tax form. Since the list of country IDs prescribed by law is different from the list in the system, you have to define the withholding tax countries again.
2.2.2.1.1 Use
Used For printing the withholding tax forms.
2.2.2.1.2 Prerequisites
N.A
2.2.2.1.3 Procedure
17. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Check Withholding Tax Countries
18. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country Key country key contains information which the system uses to check entries such as the length of the postal code or bank account number
Withholding tax country An additional country is needed for calculating or reporting withholding tax.
Description Text of country
2.2.2.2 Define Withholding Tax Codes
If your national tax authorities use withholding tax keys to identify the different withholding tax types, you can define these official names for your tax codes here.
2.2.2.2.1 Use
System can therefore assign the withholding tax items to the correct withholding tax return.
2.2.2.2.2 Prerequisites
N.A
2.2.2.2.3 Procedure
19. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Define Withholding Tax Codes
20. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Official Key Official withholding tax codes are defined which must be included in official reports.
Name Description of official key
National tax code With this value you can classify every official tax key. This information is required on certain legal reports
Country Off. w/tax key Nat. Tax Code Text (40 characters)
NP COMN Commission
NP CONT Contractors
NP DIVD Dividends
NP INTR Interest
NP MANT Maintenance
NP PROF Professional
NP RENT Rent
2.2.2.3 Check Recipient Types
The type of recipient categorizes the vendor, which is necessary for printing the withholding tax form.
2.2.2.3.1 Use
To print from for vendors.
2.2.2.3.2 Prerequisites
N.A
2.2.2.3.3 Procedure
21. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Extended Withholding Taxs Basic Settings  Check Recipient Types
22. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
With holding tax type This indicator is used to classify the different types of withholding tax
Rec. Type The type of recipient can be defined in the vendor master record
Text Description of Rec. type
Country Withhld tax type Recipient type Text
NP I1 NR Non - residents
NP I1 PN Person Not Registered
NP I1 PR Person Registered
NP P1 NR Non - residents
NP P1 PN Person Not Registered
NP P1 PR Person Registered
TH I1 3 Phaw.Ngaw.Daw. 03
TH I1 53 Phaw.Ngaw.Daw. 53
TH I1 54 Phaw.Ngaw.Daw. 54
TH I2 3 Phaw.Ngaw.Daw. 03
TH I2 53 Phaw.Ngaw.Daw. 53
TH I2 54 Phaw.Ngaw.Daw. 54
TH P1 3 Phaw.Ngaw.Daw. 03
TH P1 53 Phaw.Ngaw.Daw. 53
TH P1 54 Phaw.Ngaw.Daw. 54
TH P2 3 Phaw.Ngaw.Daw. 03
TH P2 53 Phaw.Ngaw.Daw. 53
TH P2 54 Phaw.Ngaw.Daw. 54
TH W1 2 Phaw.Ngaw.Daw. 02
TH W1 3 Phaw.Ngaw.Daw. 03
TH W1 53 Phaw.Ngaw.Daw. 53
TH W1 54 Phaw.Ngaw.Daw. 54
TH WP 2 Phaw.Ngaw.Daw. 02
TH WP 3 Phaw.Ngaw.Daw. 03
TH WP 53 Phaw.Ngaw.Daw. 53
TH WP 54 Phaw.Ngaw.Daw. 54
2.2.2.4 Define Income Types
The income type is a classification of your (foreign) vendors according to income.
2.2.2.4.1 Use
You need the income type as a specification for the withholding tax return...
2.2.2.4.2 Prerequisites
N.A
2.2.2.4.3 Procedure
23. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Define Income Types
24. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Income type Type of income subject to withholding tax
Text Description of income type
2.2.2.5 Define Withholding Tax Type for Invoice Posting
You define the withholding tax type for the posting at the time of entering an invoice. This withholding tax type does not have any effect on the payment.
2.2.2.5.1 Use
The withholding tax type used for the posting at the time of entering an invoice.
2.2.2.5.2 Prerequisites
N.A
2.2.2.5.3 Procedure
25. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Withholding Tax Type for Invoice Posting
26. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/TAX type No. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Base amount Net amount,
Modif net amount.
Gross amount,
Tax amount ,
Modif tax amount ,
Inherit base,
Base amount Reductn the system uses the selected amount as the base amount to calculate the withholding tax amount.
Rounding rules W/Tax comm.round,
Round w/Tax amnt up,
Round w/tax amount To enable the system to calculate withholding tax, you must specify a rounding rule for each withholding tax type.
Post w/tax amount TShe withholding tax amount is both calculated and posted
Accumulation type No accumulation,
Per calendar year,
Per quarter,
Per month,
Per year ,starting with mnth
Acc. W/Tax to max. Is used to accumulated withholding tax
W/tax base manual withholding tax type, the field withholding tax base amount is ready for input
Manal w/tax amnt For document entry the field withholding tax base amount is ready for input for this withholding tax type
No cert. numbering Prevents certificate numbering
Region the region forms part of the address
Base Amount W/tax code level,
Type Level Defines the minimum/maximum withholding tax base amount at withholding tax code level.
Withholding tax amount W/Tax code level,
Type Level Defines the minimum/maximum withholding tax amount at withholding tax type level
2.2.2.6 Define Withholding Tax Type for Payment Posting
You define the withholding tax type for posting at the time of paying. You also have to enter the withholding tax information when entering the document for this withholding tax type. (Only for Thailand)
2.2.2.6.1 Use
The withholding tax type used at the time of posting.
2.2.2.6.2 Prerequisites
N.A
2.2.2.6.3 Procedure
27. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Withholding Tax Type for Payment Posting
28. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/TAX type No. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Base amount Net amount,
Modif .net amount.
Gross amount,
Tax amount ,
Modif tax amount ,
Inherit base,
the system uses the selected amount as the base amount to calculate the withholding tax amount.
Rounding rules W/Tax comm.round,
Round w/Tax amnt up,
Round w/tax amount To enable the system to calculate withholding tax, you must specify a rounding rule for each withholding tax type.
Cash discount W/tax pre c/dis,
c/dis pre w/tax
Post w/tax amount TShe withholding tax amount is both calculated and posted
Accumulation type No accumulation,
Per calendar year,
Per quarter,
Per month,
Per year ,starting with month,
Combined Accum
Acc. W/Tax to max. Is used to accumulated withholding tax
W/tax base manual withholding tax type, the field withholding tax base amount is ready for input
Manal w/tax amnt For document entry the field withholding tax base amount is ready for input for this withholding tax type
Self W/holding When you come to make a payment, you can then decide, on a case by case basis, whether self-withholding should apply
W/Tax alrdy w/hd the amount can be entered when you post the invoice
W/tax for Pmnt the withholding tax amount can be entered manually for incoming and outgoing payments
No.Cert. numbering Prevents certificate numbering
Region the region forms part of the address
Base Amount W/tax code level,
Type Level Defines the minimum/maximum withholding tax base amount at withholding tax code level.
Withholding tax amount W/Tax code level,
Type Level Defines the minimum/maximum withholding tax amount at withholding tax type level
Central invoice No centr.invoice,
Cent.inv & 1st p.pmt,
Central inv.prop. indicator, "Central invoicing" is not applied to this withholding tax type. N.A keep it as no.
Minimum check Minimum check at item level,
Check min base amnt at pmnt doc level,
Min .base amnt check at doc invoice level,
Amount min.check at payment doc level,
Tax exempt amount check at Document level You can select any indicator system calculate the tax and post after checking the specified base amount
2.2.2.7 Define Rounding Rule for Withholding Tax Type
You define rounding rules for the individual withholding tax types.
2.2.2.7.1 Use
Rounding rules only apply to the posting of withholding tax amounts in the appropriate company code
2.2.2.7.2 Prerequisites
N.A
2.2.2.7.3 Procedure
29. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Type  Define Rounding Rule for Withholding Tax Type
30. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code NP01 The company code is an organizational unit within financial accounting.
W/th .type I1,P1 This indicator is used to classify the different types of withholding tax.
Currency NPR Currency key for amounts in the system.
Unit 100 Unit to be round off
2.2.2.8 Define Withholding Tax Codes
You define the withholding tax codes rounding for calculating withholding tax.
2.2.2.8.1 Use
Used for calculating the withholding tax.
2.2.2.8.2 Prerequisites
N.A
2.2.2.8.3 Procedure
31. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Codes  Define Withholding Tax Codes
32. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
w/tax code One or more "withholding tax codes" are assigned to each withholding tax type
Off.W/Tax Key official withholding tax codes are defined which must be included in official reports
Percentage subject to tax Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
Post.Indic If you set this indicator tax amount is deducted accordingly
1 - Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
3- Portion of the invoiced amounts which are subject to tax with the above-mentioned withholding tax code.
With/tax rate This is the percentage rate applied to the withholding tax base amount to arrive at the withholding tax amount
With /tax rate ( fraction) Withholding tax rate counter, if the rate can be entered as a fraction
W.tax From Indicator that withholding tax is to be calculated according to a special procedure
Region The region forms part of the address
Prov.tax.code Together with the country key, the region and the withholding tax class,the fiscal province code defines a reporting key that is required for reporting withholding tax (DME) and by the tax authorities (Spain).
Income type Type of income subject to withholding tax
2.2.2.9 Define Formulas for Calculating Withholding Tax
You define formulas (scales) for calculating withholding tax. In order to use a formula for calculating withholding tax, you must enter the national currency in the Currency key field of the relevant company code.
2.2.2.9.1 Use
Used for defining the specification like from which date ,up to what amount the tax rate is applicable
2.2.2.9.2 Prerequisites
N.A
2.2.2.9.3 Procedure
33. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Codes  Define Formulas for Calculating Withholding Tax
34. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
currency Currency key for amounts in the system.
Withhld tax type This indicator is used to classify the different types of withholding tax
w/tax code One or more "withholding tax codes" are assigned to each withholding tax type
Wcty an additional country is needed for calculating or reporting withholding tax
Valid from The date valid from
To base amnt Maximum withholding tax base amount up to which the withholding tax rate specified is to be used
Whld Tax Percentage rate, which is used in conjunction with the withholding tax base amount to calculate the withholding tax amount
Red RT Percentage rate which is to be used for the withholding tax base amount if there is a valid exemption certificate, to calculate the withholding tax amount
Reduce.base amt. Amount by which the base amount is to be reduced in order to determine the withholding tax amount by means of the withholding tax rate
Dec.red.bse.amt Amount by which the base amount is to be reduced with withholding tax exemption in order to determine the withholding tax amount by means of the decreased withholding tax rate
2.2.2.10 Portray Dependencies between Withholding Tax Types
You can represent dependencies between withholding tax categories.
2.2.2.10.1 Use
You can use in a sequence of withholding tax in a sequence.
2.2.2.10.2 Prerequisites
N.A
2.2.2.10.3 Procedure
35. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Withholding Tax Base Amount Portray Dependencies Between Withholding Tax Types
36. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/tax type no. By numbering withholding tax types, you can have withholding tax calculated in a particular sequence
Depend on type no. Sequence number of the withholding tax type whose withholding tax amount has some influence in the calculation of the withholding tax base amount
Table values
Cty Wth.t.type W/tax no. Depen.type Name
NP I1 1 Invoice posting - EWT
NP P1 2 Payment posting - EWT
2.2.2.11 Define Min/Max Amounts for Withholding Tax Codes
you define minimum and maximum amounts for withholding tax codes. In the withholding tax base exemption amount field you can specify an amount which is deducted when calculating the with holding tax base. The amount of the tax exemption does not have any effect when matching the withholding tax base with the minimum, because the base and the minimum are matched before the tax-exempt amount is deducted.
2.2.2.11.1 Use
Used for exemption amount field you can specify an amount which is deducted when calculating the with holding tax base.
2.2.2.11.2 Prerequisites
N.A
2.2.2.11.3 Procedure
37. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Taxs  Calculation  Minimum and Maximum Amounts Define Min/Max Amounts for Withholding Tax Codes
38. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Country The country key contains information which the system uses to check entries
Withhld tax type This indicator is used to classify the different types of withholding tax
W/tax Code One or more "withholding tax codes" are assigned to each withholding tax type.
Currency Currency key for amounts in the system.
Valid from The date valid from
Minimum W/tax amount Minimum withholding tax amount. The withholding tax amount calculated if only posted if it exceeds this minimum amount.
Maximum W/tax amount Maximum withholding tax amount. If the withholding tax amount calculated exceeds this maximum, the system posts the maximum amount (and not the actual tax amount
Minimum base amount Minimum withholding tax base amount.
W/Tax bse exem.amount The withholding tax base exemption amount is deducted from the base amount before the withholding tax amount is calculated
2.2.2.12 Assign Withholding Tax Types to Company Codes
You assign withholding tax categories to company codes.
2.2.2.12.1 Use
To work with withholding tax .
2.2.2.12.2 Prerequisites
Company code
Tax code
2.2.2.12.3 Procedure
39. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Company Code Assign Withholding Tax Types to Company Codes
40. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code The company code is an organizational unit within financial accounting.
Withhld tax type This indicator is used to classify the different types of withholding tax.
Recipient type The type of recipient can be defined in the vendor master record
With/tax agent you tell the system that for this withholding tax type, the company code is entitled to withhold tax on behalf of a vendor
W/Tax obligated from Date from which.The company code is obligated to withhold tax for the given withholding tax type
Oblig. to W/Tax Until Date to which. The company code is obligated to withhold tax for the withholding tax type.
W/tax Number This is a number issued by the tax authorities per withholding tax type.
Subject to W/tax you tell the system that the company code for this withholding tax type is subject to withholding tax.
Self Withhldg agent the company code can withhold tax on its own behalf for this withholding tax type
Wxeption number Numbered assigned by the relevant authorities for exemption from withholding tax.
Exemption reas. used to classify different types of exemption from liability to a particular withholding tax.
Exemption rate Rate of exemption from withholding tax.
Exempt from Date from which withholding tax exemption applies.
Exempt to Date up to which withholding tax exemption applies.
2.2.2.13 Activate Extended Withholding Tax
You can activate extended withholding tax.
2.2.2.13.1 Use
To work with extended withholding tax.
2.2.2.13.2 Prerequisites
Company code
2.2.2.13.3 Procedure
41. Access the activity using the following navigation options:
Transaction Code SPRO
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Company Code Activate Extended Withholding Tax
42. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Company code The company code is an organizational unit within financial accounting.
Extended w/tax You select this indicator; you activate extended withholding tax processing.
2.2.2.14 Accounts for Withholding Tax to be Paid Over
You define the accounts for the withholding tax to be paid over.
2.2.2.14.1 Use
Used for posting extended withholding tax.
2.2.2.14.2 Prerequisites
Tax code
GL Account must exist in company code
2.2.2.14.3 Procedure
43. Access the activity using the following navigation options:
Transaction Code OBWW
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accounts for Withholding Tax to be Paid Over
44. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction WIT The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Withholding tax type Indicates a grouping of valuation areas to facilitate the administration of the table of standard accounts by minimizing the number of entries.
Withholding tax code Key which has a different meaning depending on the procedure. It is used to differentiate account determination.
Account The G/L account number identifies the G/L account in a chart of accounts.
2.2.2.15 Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
You can define the accounts for the withholding tax offsetting entry for the "grossing up" procedure .
2.2.2.15.1 Use
Used for posting extended withholding tax.
2.2.2.15.2 Prerequisites
Tax code
GL Account must exist in company code
2.2.2.15.3 Procedure
45. Access the activity using the following navigation options:
Transaction Code OBWU
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accts for W/hold.Tax for "Gross.Up" Offsetting Entry
46. On the Overview screen, make the following entries:
Field Name Description Usage Remarks
Transaction GRU The transaction keys are used to determine accounts or posting keys for line items which are created automatically by the system.
Withholding tax type Indicates a grouping of valuation areas to facilitate the administration of the table of standard accounts by minimizing the number of entries.
Withholding tax code Key which has a different meaning depending on the procedure. It is used to differentiate account determination.
Account The G/L account number identifies the G/L account in a chart of accounts.
2.2.2.16 Define Accounts for Self-Withholding Tax
You can define the accounts to which withholding tax is posted.
2.2.2.16.1 Use
Used for posting extended withholding tax.
2.2.2.16.2 Prerequisites
GL Account must exist in company code
2.2.2.16.3 Procedure
47. Access the activity using the following navigation options:
Transaction Code OBWS
IMG Menu IMG Menu Path :
Financial Accounting  Financial Accounting Global Settings  Withholding Tax Withholding Tax Extended Withholding Tax s  Accounts for Withholding Tax Accounts for Withholding Tax Define Accounts for Self-Withholding Tax
48. On the Overview screen, make the following entries: -
Friends,
I have a question about 1099 witholding. We are configured with classic and extended witholding tax. Currently my company is not witholding tax, but now for only few vendors they want to witholding 30% tax and for rest not withold. How can I do this for just few vendors, and not others and where do I do.
Also when we withold tax, it should do automatic posting. How can I accomplish this and what account should I set debit and what as credit.
Please give me a solution.
Thanks for your help.
Ritu.Hi
Steps
1. Check withholding tax countries
2. Define official withholding tax code
3. Define business places
4. Maintain factory calendar
5. Assign factory calendars to business place
6. Define Ex. Withholding tax types for invoice postings
7. Define EX withholding tax types for payment posting
8. Define Ex. Withholding tax codes
9. Portray dependencies between tax types
10. Check recipient types
11. Maintain due dates
12. Assign Ex. Withholding tax types to Company code
13. Activate Ex. Withholding tax
14. Maintain surcharge calculation methods
15. Maintain surcharge Tax codes (separate tax codes)
16. Maintain surcharge rates (surcharge combined with basic WH tax codes)
17. Create a G/L a/C for Ex. Withholding tax
18. Define A/C for Ex. Withholding tax (OBWW)
19. Make changes in Vendor master (XK02)
20. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain
Company code settings
21. Specify the document type
22. Maintain number groups
23. Maintain number ranges
24. Assign number ranges to number group
25. Maintain number groups and SAP script form (for TDS certificates)
26. Maintain number ranges
27. Maintain number ranges to number groups
28. Postings (F-43)
29. Enter remittance challan
30. Enter bank challan
31. Printing of TDS certificates
32. Printing of annual return
regards,
R.Ramakrishnaraj -
Outbound delivery date in June and customer invoice post in July,tax rate?
Hi Experts
tax rate (June)=22%
tax rate (july)=24%
issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
Please let me know that,
1)how system picking tax rate on base like billing date or service render date or ...?
2)how to take tax rate (june)=22% in July posting.
regards
sachinTax Rate is picked based on the pricing date.
You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
Regards,
Gaurav -
Two different tax rates in same tax code
hi,
I have a client requirement as follows. A tax code is created for 12.5% cenvat. This tax code is used by one company. Now the same tax code will be used by second company but in some of their transactions they want 5% cenvat and balance 7.5% to be transferred to inventory.
Can such a config be done with same tax code with condition types or something? PLZ help in this issue. FYI the client does not wants a separate tax code to be created as volume of transactions with 5% tax rate is very less.
thanks and reagdrs
Tanuja NAik
FICO consultantUnfortunately, same tax code can't be used with different rates. In your situation, it's inevitable to create another tax code.
-
Hi there,
i have a problem while I'm adding an AR Invoice Document contented witholding Tax, using DI API 2005 SP01.
i have an error message "Total Taxable amount of all rows exceeds the based amount"
Seems like the base amount is never filled, because in the DI API i can not find a way to fill it (base amount is a read only field).
does anyone know how to solved this issued
thanks for all your solution
rgds
alvinHi Edward,
thanks for your quick reply
regarding to your answer,
i'm using the latest patch of 2005A SP01 (PL 22)
if i created via SBO interface (GUI), as we knew that base amount in WTax Table
is filled automatically depend on Total Before Discount (in case of Net), but
my problem is when i create via DI API (SDK) object (Witholding Tax Object) (not using SBO GUI). I cannot set the base amount value, so I got those Error message which i already posted above.
Please your advice
Thanks & rgds
alvin -
Tax Rate is not picking in SD flow
Hi,
I have maintained the Tax code and Tax Jurisdiction Code in FTXP.But the system is not picking the Tax Rates in Sales Order
What could be the reason for this.Kindly help me in fix this issue. I am getting the below error while releasing the Billing document in VF02.
Why it is giving the below error even though i have maintained FTXP tax rates in with Tax code and Tax jurisdiction code
Tax code in procedure TAXUSJ is invalid
Message no. FICORE704
Diagnosis
The tax code entered is not defined in the country for this company code.
System response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
2. Create a new tax code if required.
Thanks
SAP GURUASSIGN TAX CODES FOR NON TAXABLE TRANSACTIONS
PATH: SPRO FINANCIAL ACCTG FINANCIAL ACCTG GLOBAL SETTINGS TAX ON SALES/PURCHASE POSTING ASSIGN TAX CODES FOR NON TAXABLE TRANSACTIONS
TRANSACTION CODE - OBCL
SELECT POSITION BUTTON
GIVE YOUR COMPANY CODE - GES
PRESS ENTER
COMPANY CODE - GES
ASSIGN INPUT TAX - V0
OUT PUT TAX - A0
SAVE & SAVE IN YOUR REQUEST -
Tax rates to be changes in scheduling agreement
I have lots of scheduling agreement which have been released as well. Now as per the new budget, we created new condition records and maintained new tax rates (excise duty from 12 to 12.50%).
we have a z program to perform GRN and it has logic written at SA line items basis so whenever we are doing GRN, it is picking old tax rates.
Is there a way i can change tax rates in PO/SA.
any function module is available.we created new condition records
Any configuration change will not have any impact on existing documents. Having said this, if you have created a new condition type and added to your existing pricing procedure, it won't work for existing schedule agreements. You need to foreclose those and create new scheduling agreements. On the other hand, if there is a change in value, you can very well predate the existing condition record and create a new condition record with the revised structure. Once you done this, you can carry out mass price change
G. Lakshmipathi -
List of tax code with tax rate
I need a list that give the tax code with the tax rate.
I can view this in SAP or witch table i look this.
Moderator: please do not log issues twice and crosspost into different (and wrong) forums. Thread relocated to ERP Financials and locked.hi
>i wanna see the list of the tax code defined for the Service PO in its "invoice" tab.like for service tax we have three tax :
check T code FTXP
> tax code displayed to which the calculations are applied
check t code OBYZ
regards
kunal -
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of t
Dear all,
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of the A/R Invoice
I have to Create a Print Lay out design of the A/R invoice for the Indain standrad please provide me some solutions for the following problems to locate the Tax combinations,Tax rate and the Tax amount in the PLD A/R Invoice ,
PACAKGE SAP B1 2005B
Need a standrad solution as per the requriment
Eg: Row Level
Tax Code created is BED+VAT
Tax combination details is
Name of Tax type Rate
Excise 16%
Ecess 2%
Hcess 1%
VAT 4%
Row No Item Qty UnitPrice Tax code Total(LC) Tax Amount
1 X 10 10000 BED+VAT 100000 21139
(Excise =16000,Ecess=320, Hcess=160, VAT=4659)
2 Y 5 20000 BED+VAT 200000 42278
(Excise =32000,Ecess=640, Hcess=320, VAT=9318)
In Print Lay out Design Requried is the deatils of Tax code combination , Rate and the Tax Amount in the followig way
Excise 16% =48000
Ecess 2% =960
Hcess 1% =480
VAT 4% =13977
Please send the feedback as early as possible urgently requried
for the further details send the feedback
Reagrds
Mr.ChitrasenHi experts,
Pls anybody have an answer to my question, i'll be very thankfull to u,
I wanted to display the Tax Break ups in Invoice say,
ECess 25
Vat 56
Excise duty 32
I've tried a lot with many of the SAP Forum thread but the results is not satisfactory..am using SAP Business One 2007 b
pls anybody who can guide me with step by step PLD creation for this problem.
I done the below steps in PLD
In Repetitive area 1
Field_1: Table-> OSTA
Column-> Type
Field_2 : Table-> OSTA
Column -> Code
Field_3: Table-> OSTA
Column-> Rate
Field_4: Table-> OSTA
Column-> Name
Field_5: Table-> A/R Invoice Tax amount per document
Column-> Tax amount
Field_6 : Table-> A/R Invoice Tax amount per document
Column-> Base amount
Field_7 : Formula -> Field_6 * Field_8
Field_8 : Formula-> Field_1==1
NOW I SORTED REPETITVE AREA 1 WITH 'SALES TAX AUTHORITIES;cODE' AND TICKED THE CHECK BOX 'SUMMARY'
AND MADE THIS REPETITIVE AREA INVISIBLE.
IN Repetive area footer
F_01 : Formula-> Field_4
F_02 : Formula-> Concat(Round(F_rate,0), '%')
F_03 : Formula-> Round(ColSum("F_tax_amount"),2)
I grouped the Repetitive area footer as Group 1
here i get the result but the Tax Rows are repeating and Tax amount varies for VAT for each rows
pls help me guys...
Thanks in advance,
Dinesh
Edited by: Dinesh S on Dec 23, 2011 1:28 PM -
Tax Combinatiom. Tax rate, tax Amount in the PLD of sales Invoice
Hello guys,
This i seached in previous forum and got partial result
Plz help me ragrding this
for my query plz scroll down
To accomplish this, you will have to create a new repetitive area (Repetitive Area1)and create the following 7 hidden fields in this new Repetitive Area1:
Field_1 > Type = Text > Value = 1 {VAT. For BED, value = -90} (you can find this value from OSTT table, numerator field)
Field_2 > Type = DB > Table = Sales Tax Authorities; Column = Numerator
Field_3 > Type = Formula > Value = Field_1==Field_2 (from step 1 & 2)
Field_4 > Type = DB > Table = AR Invoice Tax Amt Per Doc; Column = Tax Rate {this is required to display the tax rate in the document footer. For Eg. 4% for VAT@4%. If you just want to display the tax amount, do not create this field} - Link this to Field_3
Field_5 > Type = DB > Table = AR Invoice Tax Amt Per Doc; Column = Tax Amount - Link this to Field_3
Field_6 > Type = Formula > Value = Field_3*Field_4
Field_7 > Type = Formula > Value = Field_3*Field_5
Now in Repetitive Area Footer1 (i.e. the footer of the new repetitive area), create the following fields (visible):
To display the Tax Rate: Field_8 > Type = Formula > Value = ColSum(Field_6)
To display the Tax Amount: Field_9 > Type = Formula > Value = ColSum(Field_7)
NOTE: You cannot display the tax name with this method. So to do that, you will have to create a Text field with the tax name in the repetitive area footer1, link it to Field_8 and then next to it, create Field_8 & Field_9 to display the relevant values
I did exaclty the same way and i am getting result too
But it is working for only 1 item , for 2nd the result is getting added up 4 times
ex : for item1 10000 base value
excise at 8% = 800
when i select 2nd item total value becomes suppose 20,000
excise at 8% becomes =3200
which sholud be 1600
Plz suggest
i am in serious troubleHi Manish,
you have to mke the formula using the ostt and inv4 for invoice pld. table .
Every taxcode has a unique nota fiscal id .Use that in ur PLD .
Ex:
First insert a repetitive area.
Suppose Hcess id is 70 in ostt.
1. Make a text field in repetive area and give 70 to it .
2. make a db field and fetch nota id from ostt.
3. make a formula field and Compare text field and db field .
4. link the text field and db field with formula field .
5. make a db field and fetch taxamount from inv4.
6. link this filed also to formula field
7 . make a new formula field and multiple the amount field and previous formula field .
8. make a new formula field in repetitive area footer and do copulmn sum of last formula field which have the result of multiplication. This is what we have done. Hope it helps.
Thanks,
Joseph
Maybe you are looking for
-
Crystal Report Cross Tab Report
In crystal report 2008, i created a cross tab report. Column shows sales order number and rows show item number. For columns that shows sales order #, I also wanted to show sales person name field right beside it. In cross tab expert, I added the fie
-
Error while retriving results from BI Answers(NQSERROR)
Hi I am getting the below error when I am trying to see the result in BI Answer Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A
-
Failure in retrieving quotas: cDOT 8.2 , NFSv4 and Centos 7.1
Hi everyone,I would like to get some help on a tedious quota issue I am facing while using NFSv4 on cDOT 8.2.1 and linux centos 7 (kernel vsersion: 3.10.0-229.el7.x86_64 ). Basically I get an "operation not permitted" eveytime I try to get quotas fr
-
Personal videos on Apple TV sound but no picture
Hi, I'm an experienced Mac user but brand new to Apple TV, just arrived yesterday. I have some personal videos not purchased through iTunes that I keep in the iTunes library as "TV shows". They all play fine when I click on them in iTunes at the iMac
-
Can't print to PDF from Illustrator
Yesterday i suddenly could not save as a PDF from Illust. After reading the forum about this I deleted the settings information. Saving to PDF now w orks but printing to PDF now fails Message: Can't print Illusrtation. Can't print from Acrobat. Can't