WL 7.0 Node Manager - auto restart after system boot fails

I have configured node manager to automatically restart managed servers on my Solaris
2.8 host. When I kill the managed server from the command line, node manager automatically
restarts the managed server just as I would expect. But when I reboot the system,
node manager does not restart the managed server. I started the managed server before
the reboot using node manager/admin console as the documentation states. I see nothing
in the logs that indicate any attempt by node manager to start the previously running
managed server, although node manager itself starts up OK after the reboot. Any
suggestions on how to get this working?
Here is my node manager config.xml contents:
#Saved configuration for webdevDomain_apps
#Sun Jul 14 23:12:08 EDT 2002
serverListenProtocol=http
serverListenHost=198.242.140.49
serverHealthCheckIntervalSeconds=180
TimeStamp=1026702630479
javaHome=/usr/jdk1.3
serverRestartDelaySeconds=60
command=online
ts2={3DES}QQj3hoYUACzB1csbrEth8Q\=\=
ts1=system
serverHealthCheckTimeoutSeconds=60
weblogic.Name=apps
java.security.policy=/home/weblogic/weblogic700/server/lib/weblogic.policy
RootDirectory=/home/webdev/weblogic700
serverStartArgs=-Xms64m -Xmx256m
- John

you are 100% right.
NM restarts MS's incase of
i) server crashes
ii) system reboots.
Kumar
John wrote:
Actually we were given a solution to this problem:
The node manager (NM) should restart managed servers (MS) upon reboot of the box.
There is one exception however - this can't happen if the MS is part of a cluster
and it hosts a migratable service. Currently there are two migratable services
- JMS and JTA. You need to have explicitly setup the migratable services for the
MS via the console.
Assuming you are not using these as migratable services you must explicitly set
a flag to indicate the MS is not hosting migratable services. This can be done
via the command line. It only needs to be done once and it will update the config.xml
file. The command line is:
java weblogic.Admin -url t3://adminhost:port -username <user> -password <password>
SET -mbean <domain>:Name=<MS name>,Type=Server -property HostsMigratableServices
false
You should see a simple reply of 'OK'.
Once this is done your should be able to reboot the box and after restart the
managed server should be running.
It worked!
Kumar Allamraju <[email protected]> wrote:
NM will only restart managed server's if they are abruptly killed.
We have no mechanism inplace to start managed server's upon system reboot.
May be you should write some startup scripts to start WLS upon system
start.
Kumar
John wrote:
I have configured node manager to automatically restart managed servers
on my Solaris
2.8 host. When I kill the managed server from the command line, node
manager automatically
restarts the managed server just as I would expect. But when I reboot
the system,
node manager does not restart the managed server. I started the managed
server before
the reboot using node manager/admin console as the documentation states.
I see nothing
in the logs that indicate any attempt by node manager to start the
previously running
managed server, although node manager itself starts up OK after the
reboot. Any
suggestions on how to get this working?
- John

Similar Messages

I-Tunes Auto-Restart After Closing Program

My i-Tunes began automatically restarting when I close the window on my desktop. It is pretty annoying.
It only restarts after I have had it open. If I have not opened i-tunes it behaves. But, if I open i-Tunes to listen to music on by desktop, and then close the program when I am done, it will restart within 10-seconds.
I am using Windows 7 and i-Tunes 10.2.2.12
I can't find a solution and sfter 15-minutes of trying to find a link to submit a help request, I gave up and am trying this avenue.
Thanks
Walt
PS: In the Product selection below, i-Tunes is not one of them. Hope this gets where it needs to go.

Thanks!
Shall I create de novell partition on the new\replaced HD?
Will Novell recreate the mirrored volumes automatically or shall I rebuild them manually?
TIA
Nanu
>>> Marcel Cox<[email protected]> 07/01/2007 20:47:06 >>>
Nanu Kalmanovitz wrote:
>
>Can be the "auto restart after abend" during the loading of NLMs be caused
>by the second HD dos (drive d:) partition?
Yes. FATFS.NLM tries to mount all FAT partitions it finds, not just the
boot partition. So any problem FAT partition may cause trouble.
>I tried the "FORMAT D: /s /x" command but it display the "Bad track in
>system space, disk unusable" error.
This sounds like your disk is physically broken. As a short term solution,
you can probably delete the DOS partition on D: but not create it again.
That way, FATFS.NLM will not try to fix the broken part of your disk. Of
course, you should as soon as possible replace your disk.
For this, you should first create and copy your DOS partition manually on
the new disk and then start your server and use NSSMU.NLM to manage the
mirroring of the NetWare partition(s).
Marcel Cox (using XanaNews 1.18.1.6)

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

Auto restart after update to IOS8 when facetime.

During the facetime my ipad have auto restart, and some the ipad is hanging need shut down the ipad and start again. but restart problem still exist.

Exchanged my 128GB iPad Air for the 3rd time this week, today. I showed the "geniuses" at the store a print out of the various postings on the site showing I'm not the only one with the problem. They only had two 128GB iPad Air's left in stock, one had IOS8 already, the other still had IOS7, needless to say I told them I wanted the IOS7. I swear I'm never ever updating this one!! They FINALLY agreed, they think its IOS8 causing all the crashes. They said they are going to contact the engineers immediately and send them the 3 iPad Air's I had this week so they can see exactly what happened to them. Hope they come out with a fix soon for everyone who does not have the ability to exchange their iPad like I did.

PC restarts after I boot to desktop, help.

My pc was running great, then MSI Live update said it had a mobo flash bios update for me. SO I flashed the BIOS and it said that it was done successfully and restarts my pc. Next, after I boot up to my desktop in Win XP, my pc will all of a sudden reboot/restart.
Please help.

After a BIOS flash you should power off your PC before booting into windows.
Remove the power cord or switch the PSU off.
Clear the CMOS for 10 mins.
Then place the CMOS jumper back to the normal position and turn on the PC.
Go into the BIOS and restore the BIOS settings you had before the flash.
Save and exit BIOS, then boot into windows.
So give that a try and post back.

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

6120c auto restart after 15mins-8hrs.

I bought my unit from a colleague to replace the one i sent to my sister. This one works well just like my old one. But, i have just two problem. Autorestarting and Hellocarbide won't install. I am, at the moment, requesting a cer. Key with plans to sign apps myself (and hoping it could solve my prob w/ Hcarbide). But the autorestart gves me the remorse of buying a 2nd hand unit. Using SBCHFexplorer, i found out autorestart begins every after at least 10 mins to 8 hours the most. Of all things, it really gves me the hell when it happens during when i am listening to my audio files or radio. It gves a highpitched tone, then restarts. I have to open my files again or the radio. And the ttpod, i have rescan my files evrytime i open it. Whew! I have tried all posible means. Upgrade the latest firmware vr. Via nokia pcsuite, used a lower memorycard, format the unit *#7370#. Stil, the restarts persit. I used rambooster, turn off autostart apps.. Just need help so much. Can anyone recommend to me a solution, or an apps that can hold or stop the autorestarting? Pls. Pls. Pls.
I.U. framework vrs. 1.00(106)
OS vers. 2.00 (1177)
Sw vers. 07.10 30-07-09 rm-243
Lang. Vers. B14.03
Lang. Sw vers Vr APAC1 01-12-06 RM-243

Hello Ravi@Sl
I believe this is because in Sandbox mode the subscriptions end every 5 minutes, but they still exist and are getting renewed periodically (since they are auto-renewal subscriptions that you can test for auto renewing 6 times a day). So when you open the application again, the paymentQueue:updatedTransactions: method gets called to inform you of the 90+ updated transactions.
I have the same problem and I believe this is the issue. Since your post was a few months ago do you mind confirming this or giving an update on your research? Thank you.

Mac wont boot, auto restarts after about 10 seconds

Hello,
My friend's mac has broken and it starts to boot for about 10 seconds, then auto reboots. He has tried booting in safe mode (holding down shift) but it doesnt change. Does anyone know how to fix it? He thinks it may be a virus, so is there a way to get it working so he can install AV software?
Thanks, Black_Sirrah239

Great Help so far, just to add...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

Auto restart after crash?

I have an xserve that has crashed a few times recently. It is our mail server. Is there a way to get it to restart automatically if the OS crashes?

There was another device back in old Mac OS 7-8-9 days that was a power strip with a modem built-in. Two of the power jacks were tied to the modem, and if there was a server crash you would dial into the telephone line to which the modem was attached. That would trigger a power cycle on those two power jacks.
It might have been a pain to get an analog phone line into a computer machine room. For people who had the computer in their offices it would have worked pretty easily. I don't know if they still make something like that or not. I guess this is why Apple added the Lights Out Management feature on the Xserves. If you had the LOM configured on the Xserves you could power cycle the machines through the IP Address setup in the LOM module.

Live Cam Voice requires restart after system sleep under Vista

I have attached my Live Cam Voice to my brandnew Vaio Notebook which runs Windows Vista Home Premium and installed the latest drivers from the Creative website. The cam works fine, until I put the laptop to sleep mode and waking it up again. After waking the PC up, the cam is not recognized anymore and I need to restart the computer.
Anybody experienced similar problems and (hopefully) has a solution? Thx.

Did you ever solve this problem? I have a similar problem on my desk top running Vista Home. I couldn't get the Vista driver (download from this wesite) to load so resorted to trying the XP dri've. This seemed to work until Vista put the machine into "Sleep" mode. After coming out of Sleep mode I eith have to restart the computer or disconnect and reconnect the webcam.

BSOD on restart after installing Boot Camp 4 Support Software

My install of Windows 7 Ultimate on a separate Boot Camp works until I try to install the Apple Boot Camp 4 Support Software. After I do so the system gives me BSOD on restart. I've tried the following suggestions from other threads:
- Renaming/removing AppleHSF.sys and AppleMNT.sys
- Removing BootCamp.exe from msconfig.exe
I've attached the error dumps associated with the BSOD, as well as a screen shot of the BSOD screen (see link below).
Windbg suggests that wininit.exe is likely causing the problem.
Any help would be greatly appreciated.
https://www.dropbox.com/s/f5do4y38y0be3s6/ErrorFiles.zip?dl=0

I do not know exsactly what your issue could be. My advice would be to try and F8 Windows into safe mode and try to run a Disc check on the Windows partition to see if their are errors that might be fixed. If you have the Windows DVD you can boot into that and run repair apps from that. You may just have a corupt boot config and its causing the BSOD. I have a 2011 Macbook and have similar problem with freeze ups on Windows 7. Mostly after it has to reboot after a update? All I can think of after looking at my Windows Events viewer was that a problem with a driver was most likely the cause. I unfortunately have Mountain Lion and have to use BootCamp 4. Personally I have never had a issue with BootCamp until 4.0 and Mountain Lion. In fact when I upgraded to Mountain Lion I did so without the BootCamp partition and then I added BootCamp back in after Mountain Lion upgrade. When I fist tried to install Windows 7 BootCamp never did start the Windows install corectly. All it did was boot back into OS X. That should have been my first hint that things would not go well

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

[Slvd] What to restart after system upgrade? When to restart X server?

Hi all,
After a system upgrade, what should be restarted? The following actions I know about:
kernel (linux): reboot
daemon (sshd, cups, iptables, etc.): rc.d restart ...
application (fvwm, mutt, etc.): restart application
But what will require restarting X server? Can the current X server continue to run after upgrading one the following:
1. xorg-server
2. libx11 or other libraries xorg-server depends on
3. anything else?
I want to keep the system up-to-date but avoid restarting the X server to maintain my X session (>100 windows carfully spread and grouped over 22 workspaces). Unfortunately, there is no xsm anymore and, no, I don't like gnome/kde/thelike.
Thanks,
Daan
Last edited by drrossum (2012-03-26 15:37:37)

brebs wrote:
A useful command is:
lsof | grep 'DEL.*lib'
I put this line in a script called stalelibs. Helps to see which services should be restarted. Or whether I'll just take the easy option and reboot :)
This is very helpful!
Also, in the link that you sent it is explained why programs don't break when their shared libraries are removed:
Existing programs (that are already loaded) have pointers to the old version, as Naib says, in RAM as code or an inode location as a file handle to the deleted version. Once all handles are gone/programs terminated, the file will then truly be "removed" from the disk and space reclaimed. Until then you'll see shared libraries still eating disk space and RAM, despite them being removed.
This is why it's good to reboot the machine after certain upgrades such as libc, so programs like init can pick up a new copy of libc.
@brebs: Thanks for the great contribution!

Telnet automation IMAP and auto restart IMAP service if failed

Hi Guys,
Hope you all can share some info how can i script .ps1 to
1. telnet to imap server port 143
2. restart the IMAP service if the failed to connect to IMAP.
thanks,
j
wai loong

Hi,
After we copy the Test-Port function within the gallery to our computer, then we could use below command to check connections, for example:
test-port -computer "imap server" -port 389 -tcp
We can save the result in a variable like below:
$result=test-port -computer "imap server" -port 389 -tcp
More details:
Windows PowerShell Script: Test-Port
http://blogs.technet.com/b/wsnetdoc/archive/2011/11/07/windows-powershell-script-test-port.aspx
Then if the value of $result indicate that the connect is failed, then we can use
Restart-Service cmdlet to stop and then restart the specified service. Or use start-service command:
http://technet.microsoft.com/en-us/library/hh849825.aspx
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Mac mini shut down on its own, will not restart, grey screen, spinning wheel. Unplugged everything, will still not restart. Did safe boot, will not restart after safe boot, only grey screen with spinning wheel.

Mac mini shut down on its own. Could not restart, chime, grey screen and spinning wheel. Unplugged everything but monitor, still only chime, grey screen and spinning wheel. Started in safe boot, shut Down, will not restart.
This happened a couple of months ago, unplugged everything and it restarted, now that won't work.

Hi BDAqua,
I just did the repair as you suggested. T ran the disc repair, and twice it cam back, the volume macintosh seems ti be okay, I also ran the verify and permissions repair, both came back okay.
I was actually hoping that they would find something, so they could repair. I shut the computer down, and restated with out holding a key, and I started up great. I'm baffled. I have moved 20 GB to an external hard drive, as I only had 10% open space.
I have Tech Tool 6, would you recommend to run a repair check on that, or just leave well enough alone.
I agree with you on the new Mac's, I have problems with no disc for back up, until they realize their mistake I will stay with Snow a Leopard. This is the first problem I have experienced, so I can't complain. Their last programs are not as perfected as under Steve, prior to his handling over the reins, hope this is not going to be the future we can expect from Apple.
I will wait to here back as to your suggestion regarding the Tech Tool check
Thanks for all your help.
Gratefully,
Cheri

WL 7.0 Node Manager - auto restart after system boot fails

Similar Messages

Maybe you are looking for