Wlan with k8n neo2 and windows 64

Hi everyone,
I'm just wondering if anybody has the wlan card shiped with the k8n neo2 working under windows 64 ?
I could not install the drivers coming with the board. Windows didn't like them. And msi has no 64bit driver on their page.
So do i have to switch to 32bit windows or use the cable again to get internet running?
Thanks,
vanish

I had it installed as a parallell installation with xp32bits just to play with it some.
Switched by changing what hd to boot from in bios . so the xp32/xp64
was completly isolated from eachother .
Removal was just to boot up xp32 and format the other drive ..
But got tired of it pretty fast .
Missed some drivers for connected printer/scanner also .
No much sense in running 32bits programs in xp64bits as they run with
the use of emulation 64-32 via wow64 and run slower than on a xp32bits system.
But it was fun to use the 64bits IE6 , blazing fast compared to the 32bits .

Similar Messages

Weird multipel error with K8N Neo2 and XMS Pro 3200LL

Hi everyone, i recently got a winchester 3200 running on my K8N Neo2 Platinum 54G board and i discovered a very weird thing and im not the only one having this problem either with this mobo/cpu. Its a bit hard to explain but i´ll giv it a try.
I can start with my current spec...
MSI K8N Neo2 Platinum 54G
AMD A64 3200+ Winchester
Corsair TwinX 1024 XMS Pro 3200LL
2x Maxtor diamondmax s-ata 80BG
Gainward 2400GT GS (6800GT)
Coolermaster Hyper 6 cpu cooler
Tagan 480w psu (28A on 12V)
Then i can continue with saying that this problem that occurs with my corsair memorys dose not happend with Adata vitesta 566 memorys.
I figure your getting curious by now
Well heres the deal. In normal frequencys, multipliers and dividers this setup runs just fine, but when i try to oc it past 220Mhz FSB only one multiplier will work, regardless of HTT multiplier or any other bios setting. The only cpu multipel that it will boot with in 133 divider is X5 over 220Mhz FSB, with the 166 divider the only cpu multipel that works then is x6, and only the x4 cpu multipel works in 200 divider. Keep in mind that this didnt happend with adata vitesta sticks, it ran fine with every multipel/divider config...
Oddly enough it works fine in 100 divider on the memorys, every cpu multipel works then past 220Mhz FSB. So far i have gotten my winnie stable at 2,6GHz in standard vcore (with adata vitesta in 200 divider or with corsair running in 100 divider, 290x9 on the cpu).
The divider table is as follows with the corsair sticks :
100 divider= every cpu multiplier bootable
133 divider= only x5 cpu multipel is bootable
166 divider= only x6 cpu multipel is bootable
200 divider= only x4 cpu multipel is bootable
With Adata vitesta 566 the following applys:
100 divider= every cpu multiplier bootable
133 divider= every cpu multiplier bootable
166 divider= every cpu multiplier bootable
200 divider= every cpu multiplier bootable
Could someone please tell me what causes this I realize that it´s because of some incompatabillity between my corsair sticks and the mobo/cpu, but what?

im having the same problem running 2x512 crucial value select 3200.
with everything at default speeds, cant lower memory speed or comp crashes before windows loads.
if i take out one stick and just run 512, then i can lower memory to 100. but thats it, except i can do the speeds that u listed with the specific cpu multiplier. with 2 sticks in though i cannot lower the memory speed at all. i cant find any fixes for this, if anyone has any clues please help!
running k8n neo2 plat. 1.4 stock bios. winchester 3000+.

I have an issue with the tabs and windows disappearing....?

I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

No Issue with the voltage in general. iPad is being charged via USB.
1. If you connect it directly to the computer - no problem.
2. If you want to charge it directly from the power socket you will need this:
http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
TZ

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

Lbo51380 wrote:
cant find an itunes app for my laptop. is there something i can get that will help with this?
Go here -> http://www.apple.com/itunes/download/

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

Issues with illustrator 10 and windows 8

any known issues with illustrator 10 and windows 8...version worked fine on windows xp....new computer with windows 8....now cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74

AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.
Mylenium

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

No sound with Flash 15 and Windows 8

No sound with Flashplayer 15 and Windows 8. I have followed the steps to enable the program and to disable Active X filtering and still no sound. Sound works on all other applications.
The Adobe website instructions refer to a way to troubleshoot sound that cannot be followed -- see the inserted text below -- it refers to an application below and there is no application shown on the page.
Can someone please help?
How do I test my speakers?
Click Test Speaker in the application shown below to hear a sample sound. Adjust your speakers or headset so the sound is at a comfortable level.
How can I display this panel again?
You may want to display this panel again if, for example, you want Flash Player to use a different microphone. To display the Microphone panel:
Right-click (Windows) or Control-click (Macintosh) the application image while it is playing.
From the context menu, select Settings, and then click the Microphone tab.
I don't see the Microphone tab, so I can't display this panel.
If your computer or device doesn't support audio recording using Flash Player, you cannot select a microphone to use, and this panel doesn't appear.

Hi
Is the sound card recognized properly in device manager or can you see yellow exclamation marks there?
I have founded an interesting article on the Toshiba website regarding no sound:
http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm
By the way: You can also mute/unmute the sound if you press FN+Esc. Check this!!!

Norton identity safe with firefox 5 and windows 7 compatibility?

Will my Norton Identity Safe work with Firefox 5 and Windows 7?

This is an old thread and the question was asked in relation to Firefox 22.
We are now on Firefox 23.0.1
If anyone has a problem using Norton with Firefox 23.0.1 or Firefox 23 please start a new thread. Use [/questions/new]
mikeymack2002 says above
''1 temporarily disable Firefox auto update''
'' 2 download the new version of FIREFOX ...''
'' just simply that it doesn't like the new Firefox update at present,''
If I understand that correctly mikeymack2002 is saying Norton does not like the Firefox updater. If that is the case it is a separate problem.Please start a new thread.
I do not wish to go off topic and continue discussing Firefox 23 and Norton here but will just add some information before locking this old and solved thread.
With regard to Firefox 23 please note this Norton post about Norton <s>not</s> '''now''' being compatible with Firefox 23
*http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-23-Support-for-Norton-Toolbar/td-p/1001655
'''Also note Norton sites may have a problem with Mixed Content Blocking (MCB) that my be an issue from Fiefox23, but there is no need to downgrade Firefox, just click on the shield in the Firefox addressbar and allow the Norton site'''.
<sub>Bug 905183 - https://community.norton.com/ mixed content blocker problem with the sites top level navigation.<s/ub>

Palm pro wont sync with outlook 2003 and windows device manager?

Palm pro wont sync with outlook 2003 and windows device manager? Files e.g. word docs or excel files sync o.k. but i need my contacts and i only get a error that there is sporblem with my desktop computer.
I am using vista and i have all updates installed.
Post relates to: Treo Pro T850U (Unlocked)

Do you have windows mobile device center installed(WMDC)? If not download it from here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
Be sure you download the correct version for your PC. If you have 32bit OS or 64bit OS. To find this out, right click on Computer under start and select properties. Near the middle it should say 32bit or 64bit. If you know you have the correct software. Open up the control panel and go to sync settings. Right click on the partnership you have setup and select delete. On your device go to Start-->Programs-->Activesync-->Menu-->Options tap on Windows PC and select Delete. Then once both are done resetup your partnership. But this time uncheck everything. Then once it is done syncing. Go to Mobile device settings and change content sync settings and select Contact. Click save and let it sync. Do the same for calendar, tasks, and notes but leave the last item checked. So when Contacts are done syncing you go and check Calendar and leave Contacts

Can I mount my external hard drive which will be compatible with both Mac and Windows?

Hello,
Can I mount my external hard drive which will be compatible with both Mac and Windows? If yes, then please let me know, because I intend to use my hard drive for both Windows and Mac, without losing any file.

Yes. By default, Mac OS X and Windows can read and write drives which are formatted as FAT32 or exFAT; NTFS drives aren't writable from Mac OS X without additional software.
(124553)

What is a good wireless printer that will work with a macbook and windows laptops?

What is a good wireless printer that will work with a macbook and windows laptops?

Any printer that visibly supports OS X will work fine. My personal recommendation is Brother, followed rather distantly by Canon.
Recently I have grown to favor Brother printers over the others. They are inexpensive, their OS X integration is well-implemented, their consumables are reasonably priced, and their technical support is free forever. If you need to call them and explain that you have a Mac, you will immediately receive competent assistance.
The third and subsequent choices are so far down from those two they're not worth mentioning. I have grown to dislike HP printers, for all the above reasons.
Read user reviews from vendor websites - Amazon is a good place to start, since Amazon lets people write almost anything they want... right, wrong, or completely idiotic.
Read the reviews on the respective manufacturers' websites as well, but consider the likelihood of them deleting negative reviews.
Process all those user reviews employing your own common sense, and draw your own conclusions.
Consider AirPrint compatibility for future needs. Those features add very little to the price over a USB - only or wireless printer. Understand that not all wireless printers are AirPrint compatible - AirPrint must be specifically indicated. Choose among this list: http://support.apple.com/kb/ht4356
After OS X compatibility, the next consideration should be the cost of consumables. Laser printers are cheaper than inkjets in that regard.
Here is a list of AirPrint compatible Brother printers and multifunction devices

Wlan with k8n neo2 and windows 64

Similar Messages

Maybe you are looking for