Wlc monitor client detail show wrong interface name

Hi,
Do anyone know why I see the wrong interface name when looking at the client details?
In the shown example the interface name should have been id017_publikunm not id161_admin
The vlan nunmer 2317 and IP address 10.17.237.x is correct for id017_publikum.
I hope some one out there can help.
Aksel,

I know its an old post but I encountered the same problem recently. What I did was I went to the same client properties and clicked on the remove button. It removed the association and when I filtered for the same client mac address I could see it has connected to the correct interface. So it was getting the correct IP Address also.............problem solved :)

Similar Messages

  • RE: iPhone 5 is showing wrong carrier name

    My iPhone 5 is showing wrong carrier name (near signal bars and also in the settings) even after turning off multiple times and even after changing carrier settings from automatic to manual and Vice Versa. My device is on iOS 7.0.4. I've tried replacing the simcard but still it is showing wrong carrier name. My service provider told me that I'm using the correct signals. I've purchased this device whilst I was in the UK with Vodafone as the carrier but the device has been unlocked to network. I've now moved to India and I'm using AIRTEL but the carrier name is displayed as VODAFONE IN.

    I've moved from Hyderabad to Bangalore and my phone started to show the correct carrier name, as soon as I entered to Karnataka cirlce from A.P. circle(I was on roaming). I think it's Airtel that relays the name as such in Hyd(A.P.) and it's nothing to do with the device. So, my problem is solved.
    Hope this helps.

  • Custom Prompt sometimes shows wrong Machine Name

    I set up a custom command prompt in my .bash_profile to show the machine name. Sometimes it works, sometimes it doesn't.
    The command:
    export PS1='\[\033[0;32m\]\h \W\$ \[\033[0m\]'
    Sometimes it shows
    lud610wxp-sales rfreedman$
    Sometimes it shows
    qaimac rfreedman$
    This is correct
    I see the same behavior on other systems although the wrong machine name is different.

    If you're on a network, the hostname for the prompt is set by performing a reverse DNS lookup of your IP address. Often an old entry will be listed in the reverse DNS table before the current one, and its name will be used instead of the correct one. You can manually edit /etc/hostconfig if this bothers you, but it generally does not affect anything because forward DNS queries will be correct.

  • Mail.app Is Showing Wrong "From" Name

    I'm having a heck of a time with Mail.app.
    The latest bug is that in the list of incoming mail, it occasionally shows the wrong From name. When I open it up, it shows the correct name.
    Any ideas?
    And I still can't get it to send mail from the proper email address. I has one it likes, and will not deviate.

    Quit Mail. Force quit if necessary.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens by pressing command-V, then press return.
    A folder window will open. Inside it there should be files with names as follows:
              Envelope Index
              ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • SO01 showing wrong user name

    Hello,
    When i go into T-code so01, I see the screen as Business workplace for
    <somebody_esle's_name> instead of Business work place for <my_name>.
    The problem is not with all the users, but only with my user Id.
    When i send the email from SAP inbox to outlook, the email is being
    received in outlook, but it is showing as if it is received from that somebody_else rather than me.
    Can someone please help and let me know how to change the settings so that it shows me the correct name?
    Regards,
    Shitij

    Was the user copied? Check SU01...

  • Terminal shows wrong computer name

    When I launch Terminal the name before the prompt is MacMini, which is the name of another computer on the network. How do I fix it?

    Pedantically and FWIW, IP routers are entirely unrelated to DNS. Your router is probably a gateway of some sort, and probably includes other functions beyond routing; probably a firewall and a DHCP server. (There are pure routers around.)
    I'd expect you are running NAT and DHCP here.
    And if that is the case, then I'd expect to see a domain name (one that is purely and carefully bogus, or preferably one that you have registered) set on the DHCP server, and provided to the clients via DHCP. I'd also expect to see two DNS servers referenced within the DHCP server configuration, your existing 8.8.8.8 and 8.8.4.4.
    Picking a bogus domain is far harder than many folks realize; best to have a real and registered one, or a subdomain of a real and registered one.

  • Last logged on by in exchange 2010 shows wrong users name.

    Dear All,
    i am having problem with wrong information display at last logged on by user at exchange 2010.
    i dont have given any users to full access or send as permission.
    please help to resolved this problem
    Sunil
    SUNIL PATEL SYSTEM ADMINISTRATOR

    You'll have to post more information and more clear problem statement to receive useful help.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Master-Detail in One Page, on CREATE master, details show wrong rows

    Hi all,
    (ADF Faces + BC, 10.1.3 su5)
    I am creating a master-detail add/edit page in ONE page.
    Master : ADF Form, with Create, Submit, Commit, Rollback operation/button
    Detail : ADF Editable Table, with Create, Submit, Delete operation / button
    When first called, the page display the existing master-details in the collection.
    When I press Create on master, I expect the detail table to be refreshed to BLANK, but it keeps on displaying the existing rows.
    Detail table only becomes BLANK after I Submit the newly created master first.
    So the question is :
    How to make the detail table BLANK after I press Create on master ?
    Thank you ,
    xtanto

    See section 10.4.3 "When to Use CreateInsert Instead of Create" in the ADF Developer's Guide for Forms/4GL Developers.

  • Why does iphone 5C app updates show wrong login name?

    When I go to the app store to update apps, a name I've never seen before comes up as the login. It's disturbing. Is this a security risk?

    You've got an app that is owned by another ID. If this was warez, then yeah there would be a security risk there.
    What's the app and what's the Apple ID?

  • I am not able to setup Gmail Mail account - error shows wrong user name or password, where as I am inputting correct password and IMAP Setting.

    Getting error in setting up email account of Gmail. Same credentials with same passwords works quietly with outlook / MS office 2013.

    Very nice, resolved problem. Account setup in Thunderbird done.
    Thank you very much for the support.

  • Problem with the wrong host name, when accessing IR or ID

    Hey all,
    I am trying to accessing the IR and ID at my client however the wrong host name is being called. For instance the
    URL should start nero.bcm.tmc.edu, but it is calling just nero. The basis guy here fixed a similar problem in the exchange profile for calling the Builder start page, where do we need to fix the problems for accessiing the IR and ID for the start page?
    Kind regards,
    Chris

    Problem reso;ved, just had to restart XI for the changes to take effect

  • March 2013: I updated US Maps - it shows wrong tow...

    I had the Nokia USA maps installed in my C6-01.  It showd a lot of update and it finished with an error.
    Then I realized that there is no US maps on my smartphone.  So installed it again via PC.
    Now  it shows wrong town name but correct ZIP code
    What should I do about it?
    Solved!
    Go to Solution.

    Hi Thanks.
    If I do that, what will happens to my stored GPS addresses?
    I have previously downlaoded all of USA maps - how can I uninstall it from the SD card on the phone. 
    Surprisingly, when I expand the USA folder via Nokia Suite it lists all states and still lets me to download California maps - what is going on here?
    Last time, when I was downloading Maps through a PC wirelessly, it showed an error.  I didn't know that all US maps had gone - not knowing it, I tried to go to a location and it didn't work and it was showing German maps - if it is a corruption, it happened then - do I need start all over again?  Then how can I still keep the saved addresses in the GPS (not the tel contacts) - you know there are two ways to save GPS addresses.
    The only problem snce the update is all new addresses that I search for shows as:
    1234 Emerson St, Santa Clara, CA, USA {note: Santa Clara is the county name and there is a city too - I entered Palo Alto and not Santa Clara)
    Previously it would have shown as (exactly as I entered):
    1234 Emerson St, Palo Alto, CA
    The new display causing a lot of confusion.
    Thanks for any suggestions.

  • Website blade shows wrong name under Application Monitoring for staging slot

    Hi,
    I've set up AI for a production and a staging  website. I can see both of them in the AI blade. I want to see them also in the website blade.
    In the production site website blade an Application Monitoring part is displayed. It shows the site name and it shows the AI name under a 'Loading...' bar (which does not go away).
    In the staging site website blade there is also an Application Monitoring part, but as the site name it shows {sitiname}/staging which is not correct (I named the site {sitename}(staging}.
    How can I linkt the right AI to the right website blade?

    Hi Vincent,
    Do you still see the Loading state in Application Monitoring part? BTW this part shouldn't show your application resource by the default, but it also shouldn't show the Loading state. You should be able to see the future selection of additional AI enablement
    for your Azure website that brings additional remote dependencies data.
    http://azure.microsoft.com/blog/2015/01/15/new-application-insights-functionality-on-azure-websites-with-the-application-insights-website-extension/
    We don't have an ability to add AI extension for the slot and as a result you'll not be able to see the resource there.
    For now you'd better use AI blade and the item about providing better experience to link the resources to the website/slot overview blade is in our backlog and we're working on this.

  • Scripting WLC show commands (ie show client detail) every x seconds/minutes

    Is there a simple way to script using either a terminal client (putty, teraterm, etc.) or Prime Infrastructure whereby I could set up a set of commands to be run at a certain interval?
    I want to conduct some client testing roaming across a site whilst some how performing a show client detail every 15 seconds and a show run-config every 30 minutes?
    TIA,
    Nick

    Is there a simple way to script using either a terminal client (putty, teraterm, etc.) or Prime Infrastructure whereby I could set up a set of commands to be run at a certain interval?
    Yes you can. 
    The easiest method is to use console.  You can knock up a script to run the command at specific intervals and log the outputs.  If you do this, you must ensure the console timeout is expanded. 
    Another option is to create a PERL script (using KRON) to telnet/SSH into the appliance and run the command and retrieve the results. 

  • Setting interface name dynamically from client for SOAP Adapter...

    Hi,
    does anyone have experience in setting the sender interface name in the HTTP-SOAP request dynamically? I have followed the instructions in "How To Use the XI 3.0 SOAP Adapter" on page 17 (see also SAP Note 856597) which say:
    "If you select Use Encoded Headers and Use Query String,
    [...]The sender SOAP adapter creates the XI message header according to the
    information provided in the query string. [...] In the sender SOAP adapter, you can use only some of the parameters, but the first
    parameter must always be the version. For example, you send from the Web service client to the following URL: http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>&version=3.0&Interface=http%3A
    %2F%2Fsap.com%2Ftest%5ETest
    This will overwrite the default interface and namespace of the sender channel."
    This is exactly what I need! However, what I actually get as a response following this description is a SOAP:Fault with a java.lang.StringIndexOutOfBoundsException: String index out of range: -1.
    Has anyone got this to work properly?
    Thanks in advance.

    Thank you for your input. I am using the following format for the call (with "x" standing for one letter each):
    http://xix.xxx.xx.xxx:5xx00/XISOAPAdapter/MessageServlet?channel=:xx_xxx_xxx_xxxx:xx_xxx_x_SOAP_S&version=3.0&Interface=http%3A%2F%2Fxxxxxxxx.xx%2Fxxxxxx%2Fxxxxxxxxxxxxxxxxxxxxxxxx%5Exxxxxxxxxxxxxxxxxxxxxx
    Anything wrong with that? With unchecked "Use Encoded Headers" and "Use Query String" it works fine (default interface) but as soon as I set these flags I get the SOAP-Fault response.
    We are on XI 3.0 SPS18.

Maybe you are looking for