Last logged on by in exchange 2010 shows wrong users name.

Dear All,
i am having problem with wrong information display at last logged on by user at exchange 2010.
i dont have given any users to full access or send as permission.
please help to resolved this problem
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

You'll have to post more information and more clear problem statement to receive useful help.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

  • SO01 showing wrong user name

    Hello,
    When i go into T-code so01, I see the screen as Business workplace for
    <somebody_esle's_name> instead of Business work place for <my_name>.
    The problem is not with all the users, but only with my user Id.
    When i send the email from SAP inbox to outlook, the email is being
    received in outlook, but it is showing as if it is received from that somebody_else rather than me.
    Can someone please help and let me know how to change the settings so that it shows me the correct name?
    Regards,
    Shitij

    Was the user copied? Check SU01...

  • I am not able to setup Gmail Mail account - error shows wrong user name or password, where as I am inputting correct password and IMAP Setting.

    Getting error in setting up email account of Gmail. Same credentials with same passwords works quietly with outlook / MS office 2013.

    Very nice, resolved problem. Account setup in Thunderbird done.
    Thank you very much for the support.

  • Word + Excel 2010 - Showing 'another user' on opening a file

    Hi,
    Bit of a odd question I would imagine but its quite a critical issue for us due to the nature of our work. All our employees have the latest Dell machines with Windows XP Pro and Office 2010 installed ... now we have a series of map drives (about 12) each
    having over 500,000 documents in (across various directories). Now when a user opens a document either in Word or Excel it goes ready only and produces the 'document can only be opened in read only' message.
    Now this is all normal, the bit that confuses me is 90% of the time it says 'document in use by another user' ... and 10% of the time, it will actually say the user who is in the document (using their logged in username) ... 
    In short, what I'm getting at is, how can I make office applications, namely word and excel say who is in the file, rather than 'another user'. This used to work perfectly in Office 2003 but since the upgrade to 2010 it's stopped.
    Thanks
    Mike 

    There is a public blog on file locking issues (http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx).
    I would suggest the following:
    If you are seeing problems where the file is locked when double clicking from Windows Explorer, but the files open up correctly when opened in Excel or Word, do the following:
    Turn off the Preview Pane, Details Pane and pop ups that show information about file and desktop items
    This is a problem that has been reported to affect Windows 7 clients only, not Windows XP. The problem here may have something to do with the Windows Explorer in Windows 7. We are currently investigating this further and will post more information as it is
    available.
    In a Windows Explorer window, do the following:
    1. Right click on the Start Button.
    2. Click 'Open Windows Explorer'.
    3. At the top left click Organize > Layout
    4. Uncheck Details Pane and Preview Pane.
    5. On a Windows menu, click on Tools > Folder Options.  In the box that opens up, click on the View tab.  Scroll down the list to
    “Show pop-up description for folder and desktop items” and clear the checkbox and then click OK.
    If you are seeing issues where the wrong user name is showing up, there is a known bug on that and a fix:
    In cases where the wrong user name is displayed in the file lock dialog
    Sometimes where it says 'another user' it has the name of someone that didn't open the file or it has no name at all. Just a big ' ' where a name ought to be. Fear not, there is a fix for this problem. The flavor depends on
    whether you have Excel 2010 or Excel 2007. The below KB Articles contain hotfixes that address several issues, not just the file locked issue. But in the dialog of the article you will see this as one of the problem descriptions:
    Assume that you have an .xls file that is protected by Information Rights Management (IRM) on a network share. When you open the file in Excel 2007, a File In Use dialog box appears. However, the dialog box does not display the
    correct name of the user who locked the file. Therefore, you cannot edit the file.
    Understand that these fixes don't make the File in Use dialog go away, they just correct the problem of showing bogus user name information on the dialog itself.
    Excel 2007 -
    http://support.microsoft.com/kb/2598133
    Excel 2010 -
    http://support.microsoft.com/kb/2598143
    Will Buffington
    Microsoft Excel Support

  • When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

    When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message.  I use Exchange 2010 only local users.

    I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
    http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
    CRM Advisor

  • Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username

    How can i get the following done:
    Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username?
    i nmust do this for 16 users TODAY, SO PLEASE HELP ME OUT HERE.
    Thanks in advance!!
    kind regards,
    Rene Veldman
    System Administrator Teidem bv, The Netherlands.

    Rene,
    Why are you not changing the username of the existing account, instead of deleting the existing one and creating a new one?
    If you truly need to delete and create new, you can save the GUID for the mailbox (Get-MailboxStatistics <mailbox alias> | Fl MailboxGuid), mail disable the existing account (Disable-Mailbox <mailbox alias>
    will work), clean the mailbox database it was hosted on (Clean-MailboxDatabase
    <database name>), then create your new account and recover the existing mailbox to that new account (Connect-Mailbox -Identity <Guid from before> -Database <Database name> -User <SAM account name of new account> -Alias
    <what you wish to set the alias to>).  In PowerShell, for all steps, you would do the following:
    $MbxAlias = <mailbox alias>
    $NewMbxAcct = <SAM Account Name for new account>
    $NewMbxAlias = <new alias for mailbox>
    $DomCtrl = (dir env:\LOGONSERVER).Value.Substring(2)
    $MbxGuid = (Get-MailboxStatistics $MbxAlias -DomainController $DomCtrl).MailboxGuid
    $MbxDb = (Get-Mailbox $MbxAlias -DomainController $DomCtrl).Database
    Disable-Mailbox $MbxAlias
    Clean-MailboxDatabase $MbxDb
    Connect-Mailbox -Identity $MbxGuid -Database $MbxDb -User $NewMbxAcct -Alias $NewMbxAlias -DomainController $DomCtrl
    You will need to supply the information in bold in the above commands, and you will need to create the new account before you run the above commands.  I include direct use of a specific domain controller so you won't need to worry about replication. 
    If you are changing the account from one domain to another, this will not help, and you will need to wait for replication throughout the process, running the commands individually.

  • Keep showing "the user name or password is incorrect after changing pwd

    after i changed my gmail password, i change it correspondingly on my ipad.
    however it keeps showing "the user name or password is incorrect.
    i even deleted the account and create again but not work.
    it worked perfectly good before i changed my gmail password.
    please help.

    additional information:
    my another gmail account on ipad mail app work fine
    checked google imap setting and caps log.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • RE: iPhone 5 is showing wrong carrier name

    My iPhone 5 is showing wrong carrier name (near signal bars and also in the settings) even after turning off multiple times and even after changing carrier settings from automatic to manual and Vice Versa. My device is on iOS 7.0.4. I've tried replacing the simcard but still it is showing wrong carrier name. My service provider told me that I'm using the correct signals. I've purchased this device whilst I was in the UK with Vodafone as the carrier but the device has been unlocked to network. I've now moved to India and I'm using AIRTEL but the carrier name is displayed as VODAFONE IN.

    I've moved from Hyderabad to Bangalore and my phone started to show the correct carrier name, as soon as I entered to Karnataka cirlce from A.P. circle(I was on roaming). I think it's Airtel that relays the name as such in Hyd(A.P.) and it's nothing to do with the device. So, my problem is solved.
    Hope this helps.

  • Appointments from Exchange 2010 show as Mail in Mailbox

    I have a very frustrating issue with a single user on one of our post offices. For reasons unknown appointments sent to the user from Exchange 2010 appear as mail items instead of appointments within the mailbox. Other users on the same post office do not get the same issue. I have tried resetting the user's views and a full client reset via maintenance. I have set the user's client settings to be the same as another user who does not get the issue without any luck either. Maintenance checks on the account does not flag any errors. I'm pretty certain I'm missing something very simple, but alas I can not think what.
    Software wise we're running client 8.0.1 on post office agent version 8.0.2. We seem to get the same results regardless of the Client version of outlook, (we have tried the web version and 2003 and 2010 of the client). Anything else I could try would be greatly appreciated.
    Kind Regards
    Rob

    In article <[email protected]>, Rob naylor
    wrote:
    > Software wise we're running client 8.0.1 on post office agent version
    > 8.0.2.
    >
    How about updating those as they are a bit old.
    Try looking at that user's account from another machine and from
    WebAccess (if installed).
    It is good to separate the PC from the user account as sometimes an odd
    problem can be from some funky issue on the PC.
    I'm not surprised that different versions of the Exchange 2010 client
    doesn't make a difference as there is the formatting is set when
    Exchange formats the outgoing to the internet.
    A thought there, is your user setup as a contact on the Exchange
    system, there have been settings in the past that caused invalid
    formatting of internet messages. Something to the effect that 'this
    user is on OutLook/Exchange vs regular internet standards'.
    Has there been a single appointment sent from a user on that Exchange
    system to two of your users?
    Andy Konecny
    Konecny Consulting Inc. in Toronto
    "Give more than others think is wise
    Challenge yourself beyond what others think is right"
    Michael 'Pinball' Clemens

  • Outlook 2010/2007 with Exchange 2010 - show email address in field To: instead name

    Hi,
    I´ve SBS 2011. Some users have more email aliases. I want to see in Outlook email adress/alias in field To: <- no user Name and Surname. I know, that I can open every message and go to Options and see full header, where is email adress, but I want
    to see it on message preview in Outlook window (or Name Surname ([email protected]))
    Thank you very much for your responses.

    I think this is not what he was looking for. The link you provided is for showing the senders smtp address and not the recipients. as i understand it, hes looking for the same that i do.
    user has multiple smtp addresses and user wants to be able to see to which of his own addresses the mails has been sent.
    im looking for that solution to show recipients smtp address in the To:-Field when showing the email
    as i unterstand it, there could not be a registry-value for outlook because exchange isnt using the smtp address internaly to deliver the email.
    the only "Simple" Solution/Workaround i found is to use a distribution group with the smtp address you want to see and only add the specific user. then the user is able to see the Name of the Distribution Group instead of his own name so
    hes able to differ.
    thanks

  • In FF5, my 2 Gmail accounts log off randomly, then both tabs show same gmail 'name' asking to log back in, instead of 1 gmail name in 1 tab & the other gmail name in 2nd tab, as were originally logged in! Help, please..

    New Acer desktop, loaded FF5 yesterday. I keep personal & professional Gmail both open at same time (worked fine in earlier FF versions). Today, both Gmails log themselves off at random & ask for log-in. But then both tabs either show personal Gmail name or show profl Gmail name ! Also signs me out of Google Reader & Calendar (both logged in w/ personal Gmail account), then gives prof Gmail name to sign back in (which won't work, of course). HELP!

    instead of adding more to the already long post, I add via replying to myself:
    writing about the issue made some things more clear, so I looked and found this:
    http://lists.debian.org/debian-user/201 … 00474.html
    which looks like my issue.
    I went and tried - and a variation of it works.
    1.) I log out
    2.) GDM gets restarted - inittab method
    it gets restarted at VT8 - it was at VT7
    3.) I go to another VT - like VT1 - and log in as root
    4.) I find the pid of consolekit with:
    ps aux | grep console
    and kill it
    kill -9 <PID>
    5.) I restart GDM - which will be at VT7 now, as it should
    and then go back to VT1, because I'll be at the GDM-login screen at VT7 now...
    6.) I find and kill consolekit _again_
    7.) I can now switch to VT7 with GDM running and log in as it should be
    console-kit-daemon will be started _again_ automatically
    It seems it gets re-started at the wrong place - or with the wrong options
    I always see it running like:
    root 6439 0.0 0.3 17432 2768 ? Sl 17:18 0:00 /usr/sbin/console-kit-daemon --no-daemon
    Maybe it is the "--no-daemon" option? Or that it should not be started by GDM but only afterwards, by the Gnome-session?
    ...or something else...
    It is not a solution really, since all this takes as much time as restarting the whole system, but without all the typing and killing and switching back and forth to consoles...but it works.
    What is happening here? Is this normal? Where could my misconfiguration be?
    Cheers
    Last edited by jomen (2010-09-27 15:48:11)

  • Exchange 2010 to 2013 users migration

    Hi,
    I am migrating users from Exchange 2010 to 2013 and facing a lot of migration issues. few of them are as follow.
    1. It hung up at "syncing" and end up with a failure.
    2. After a long migration i got the following errors
    Error: MigrationPermanentExeception: Failed to reset the target mailbox after the move. Error Details:MaipExceptionADUnavailable: Unable to prepopulate the cache for user :: on domain controller xyz.domain.com (hr=0x80004005,ec=2414) Diagnosti Context: Lid:
    65256 Lid:1494 ---- Remote Context Beg ---- Lid: 52664 StoreEc: 0x96E Lid: 35973 StoreEc: 0x96E Target Mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible.
    Error details: Target mailbox connection was lost.
    3. users migration is taking a lot of time although mailbox size is not big and both servers are in same datacenter.
    Need urgent help pls....

    Hi,
    Here are the general steps for troubleshooting mailbox moves:
    1. If the move request didn't complete, view the Move Request Statistics.
    2. If the move request completed with errors, view the move report.
    3. View the Event log on the Client Access server running the instance of the Microsoft Exchange Mailbox Replication service that's processing the failed move request.
    4. use the Exchange Management Console or the Exchange Management Shell to increase the diagnostic logging levels on the Client Access server for the Mailbox Move and Service categories of the MSExchange Mailbox Replication service.
    For more detailed information about general steps for troubleshooting mailbox moves, you can refer to the article below:
    http://technet.microsoft.com/en-us/library/dd638094(v=exchg.141).aspx
    Additionally, in order to narrow down the cause, I’d like to confirm the following information:
    1. Are the problematic target mailboxes in the same database?
    2. Is there a time boundary? After that, you cannot move mailboxes:
    http://social.technet.microsoft.com/Forums/en-US/90403f75-e530-478a-ab68-27823b730f68/exchange-2013-batch-to-migrate-users-from-2010-database-is-hung-at-syncing-after-a-disaster?forum=exchangesvrdeploy
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • Introduce an "passive" Exchange 2013 in Exchange 2010 environment without user or administration impact.

    Hi
    We wish to introduce an Exchange 2013 server in our existing Exchange 2010 environment.
    The Exchange 2013 server is only needed for migration purposes where we wish to leverage the new features of the migration-batch functionality.
    It’s important that the Exchange 2013 server will not have any “visible” impact on the Exchange 2010 environment, or take over any functionality, right now, since the customer wish to stay on 2010.
    Can you guys come up with anything to be aware of?
    Oblivious we disable the Autodiscover SCP for the Exchange 2013 server, so that the clients will not hit this server. Nor will we point any URLs to the Exchange 2013
    I can see that a new “Default Offline Address Book (Exch2013)” is created and set as default when EX2013 is installed. We will change this back to the default EX2010.
    The server will properly take part in the Shadow Redundancy feature, and is doesn’t seem to be possible to exclude the server or avoid, unless disabling Shadow Reduncancy.
    I can only come up with these 3 things that will have a "direct" impact on the environment, but any input will be highly appreciated!
    BR,
    Martin

    Hi,
    I agree with Li Zhen’s suggestion. If you don’t migrate from Exchange 2010 to Exchange 2013, we can disable add services in Exchange 2013 and don’t use it any more.
    If you want that the Exchange 2013 server will not have any “visible” impact on the Exchange 2010 environment, or take over any functionality, please keep the published server to pointed to Exchange 2010. Then the original configuration in Exchange 2010
    would not be changed to the new configuration in Exchange 2013.
    If you want to use Exchange 2013, then we can point the published server to Exchange 2013 and configure the virtual directories in Exchange 2013. Though all mailboxes are still located in Exchange 2010, all external requests would be proxy or redirected
    from CAS 2013 TO CAS 2010 automatically.
    For more information about Client Connectivity in an Exchange 2013 Coexistence Environment, please refer to:
    http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • Certificate error on Outlook 2013 clients, Outlook 2007 clients do not get certificate error, Exchange 2010, dot local domain name

    Hi
    I'm looking for a solution that I can't seem to find.  I have an Exchange 2010 server running in a dot local domain (domainname.local), so my SSL certificate is installed using the servers external email DNS name.  email.mycompany.com
    I have followed the instructions to resolve this on the Exchange server, implemented the changes so autodiscovery sees the server as email.mycompany.com.  This works great for my Outlook 2007 users.  The downside is that none of my Outlook 2013
    clients can access their email without the certificate error server name mismatch.  
    I know Outlook 2013 has tighter security but I need to get rid of these cert errors, any thoughts out there?

    Hi,
    Since both your Outlook 2007 users and Outlook 2013 users are using Exchange 2010 with the same server configuration, it should be working in both Outlook client version.
    Please restart your IIS service by running IISReset /noforce from a Command Prompt window in Exchange to have a try. In Outlook, please re-create a Outlook profile to check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for