WLS 5.1 SP12 Evaluation Copy - License Expiration error

Hi,
I have installed the evaluation copy of Weblogic Server 5.1 SP12 today (July 09th)
on my WinNT system. When I run startWebLogic.cmd to start the server, it gives me
licnese expiration error. The expiration date in the license file is 08-July-2002.
Any help on this would be appreciated.
Thanks,
Shirish

I will file a CR to update the license file in the kit.
Meanwhile you can contact support to get a temp/eval license.
Kumar
Shirish Panse wrote:
Hi,
I downloaded the evalution copy of Weblogic Server Version 5.1 SP12 for the Windows
NT. However I am unable to run the Weblogic server because of the license expiration
error. The license file contains old expiration date.
Could you pls send me the updated license file?
Thanks,
Shirish Panse

Similar Messages

Weblogic 5.1 SP12 Evaluation copy : License expiration error

Hi,
I downloaded the evalution copy of Weblogic Server
Version 5.1 SP12 for the Windows NT on 08/12. However
I am unable to run the Weblogic server because of the
license expiration error. The license file shows the
expiration date as 08-Jul-2002.
Could you pls send me the updated license file?
Thanks,
Shirish Panse

I will file a CR to update the license file in the kit.
Meanwhile you can contact support to get a temp/eval license.
Kumar
Shirish Panse wrote:
Hi,
I downloaded the evalution copy of Weblogic Server Version 5.1 SP12 for the Windows
NT. However I am unable to run the Weblogic server because of the license expiration
error. The license file contains old expiration date.
Could you pls send me the updated license file?
Thanks,
Shirish Panse

License Expired Error Message

I have purchased several books to read on my Sony eReader (650). Today, however, when I tried to download new purchases, I received the message "Cannot transfer file. License expired." What does this mean and what can I do about it?

Hello and welcome to the forums.
Please follow the below guide to authorise your reader through Adobe® Digital Editions.
How to authorize a device for use with Adobe DRM-protected content or the Adobe® Digital Editions software.
http://www.kb.sony.com/selfservice/micr ... 0294846687

License Expired Error with CS4 Design Standard Student Edition

Photoshop, Illustrator, and InDesign all say that my license is expired. However, all the other programs work, including but not limited to Adobe Air, Device Mangager, Mobile Manager, Bridge, Media Player, and Acrobat. Why is it only these three programs and none of the others? Trouble shot with changing the date on my computer and ran the license recovery application Adobe has posted. Neither of them work. Called support and waited an hour and half on hold without ever talking to someone. Obviously, as posted by Adobe themselves, their support center is having huge difficulties. However, I need these programs to be working now for a project I must submit. Can anyone help?

I didn't think you buy the student edition anywhere but from a school. You'll need to call Adobe to find out what your next step is.
Bob

Evaluation license expiring soon

Hi there,
I am new to Xcelsius and I am attempting to make some Visualizations and learn the software. I work for an SAP B1 partner in the UK and I want to produce some reports to demonstrate to Customers etc from by Demo environment.
However, my evaluation copy is expiring in 15 days - can I get an unlimited licensed version of the software in the same way that we can get Crystal Reports for SAP B1?
Thans
Mark

Hi Mark,
You can get the permanenet license key by contacting your account manager.
Alternately you can also contact CIC at :
+1 800-677-7271 (toll free within North America) 7x24
+1 610 661-7241 (outside of North America) 7x24.
For UK:+44 (0)870 608 8000 (7x24)
Please let me know if this helps.
Thanks,
Amit Mathur.

Applying patch for WLS 10 license expiration does not help

I recently upgraded my BEA installation from 9.2 to 10.0. I applied the 2VJT patch to my installation of WLS10 to get around the licensing problem. But the patch does not seem to help and i still get the license expired error.
To verify that the patch has been applied, i checked using the bsu scripts and shown below is the output.
Any clues on what is missing?
Thanks
Ramdas
ProductName: WebLogic Server
ProductVersion: 10.0
Components: WebLogic Server/Server,WebLogic Server/Server Examples,WebLogic Server /Server Add-ons,WebLogic Server/Evaluation Database
BEAHome: /u1/toro/toro/toro/tools/bea-wl9.2
ProductHome: /u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0
PatchSystemDir: /u1/toro/toro/toro/tools/bea-wl9.2/utils/bsu
PatchDir: /u1/toro/toro/toro/tools/bea-wl9.2/patch_wls1000
Profile: Default
DownloadDir: /u1/toro/toro/toro/tools/bea-wl9.2/utils/bsu/cache_dir
JavaHome: /u1/toro/toro/toro/tools/bea-wl9.2/jdk150_06
JavaVersion: 1.5.0_06
JavaVendor: Sun
Patch ID: 2VJT (CR322214)

Further debugging the issue, shows that the PATCH_CLASSPATH being picked up is wrong and points to the 9.2 version instead of the wls10.0. Not sure how to fix this since the rest of the JARs are from the wls10 version as is seen here (fyi bea-wl9.2 is BEA_HOME)
CLASSPATH=:/usr/local/bea/patch_weblogic920/profiles/default/sys_manifest_classpath/weblogic_patch.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/jrockit90_150_06/lib/tools.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/weblogic_sp.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/weblogic.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/features/weblogic.server.modules_10.0.0.0.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/features/com.bea.cie.common-plugin.launch_2.1.0.0.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/webservices.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/org.apache.ant_1.6.5/lib/ant-all.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/common/eval/pointbase/lib/pbclient51.jar:
/u1/toro/toro/toro/tools/bea-wl9.2/wlserver_10.0/server/lib/xqrl.jar:
Thanks
Ramdas

Update from windows 8.1 pro evaluation copy to windows 8.1

Greetings.
Today i suddenly got BSOD when i play some games. It was too fast i cant see what the error is. And after my pc restart thers an error messege it says my windows evaluation copy has expired and will restart every 2 hour and it told me to download the newer
version and it give me option to go to windows strore or closed the messege. So i ofcourse click the windows store and download it. And after download progress reach 30% , again BSOD appears so fast i cant read what the error code is after restart the same
messega about my windows expired appear so i click windows store again [Im sure that it will resume my download progres at 30%] . But IT NOT. Im force to download again from 0%.
Now i try to search google for help :
-How to stop this damn restarting [BSOD in my case] every 2 hour because I CANT RESUME my last download how can i solve this problem?
Any solution you can give me will be A GREAT help.

You have screwed up your system and you're blaming the crashes on someone else. You need to stop thinking it's someone else's problem. Keeping your system healthy is your responsibility.
There is NO upgrade path from preview/evaluation copies to the released versions, anyway, so it really doesn't matter. You have to reinstall
something.
You could reinstall 8.0 and upgrade, or you could get an 8.1 disc and put that in as a fresh install (more expensive, but my recommendation), or you could see if maybe this can help you:
http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

How to provide the license key after having the evaluation copy expired for SQL Server 2012 Standard?

How to provide the license key after having evaluation copy expired for SQL Server 2012 Standard?
I couldn’t figure out how to provide the license key after having
evaluation copy expired for SQL Server 2012 Standard
Thank you
Best
Jamal

The following blog is on the topic: Upgrading from SQL Server 2012 Evaluation Edition
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]

Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat

License expired despite downloading new version of WLS 6.1

Trying to run the server for WLS 6.1 sp1 after downloading sp1. I had an
expired license prior to downloading and these still seems to be present
on my PC despite reinstalling everything.
My understanding is that BEA are happy for us to download the server
again when the evaluation license expires - is this the case?
How can I replace the old expired license with the newly downloaded one?

Guenter,
The license file for WebLogic Server 6.1 shuld have release="6.1">.
If you have a license that says Release="*", this is a WebLogic Server
6.0 license.
Raj Alagumalai
Guenter Quintus wrote:
Hi,
i have the same problem. If use the eval key provided originally at weblogic 6.1
it works. But if i want to replace it with a license for Release="*" instead of
Release="6.1" it still rejects using them. Can u help please?
cu,
Guenter
"Katie R" <[email protected]> wrote:
Jimmy-
If you have the new licence now, you just need to run UpdateLicense as
stated
in
http://e-docs.bea.com/wls/docs60/adminguide/license.html
(In case you don't have access to edocs, the following is the jist of
it from
the documentation.)
Save the license update file under a name other than license.bea in the
BEA home
directory.
Make sure that java (Java 2) is in your path. To add the JDK to your
path, enter
one of the following commands:
set PATH=.\jdk130\bin;%PATH% (Windows systems)
set PATH=./jdk130/bin:$PATH (UNIX systems)
In a command shell, enter the following command in the BEA home directory:
UpdateLicense license_update_file
where license_update_file is the name under which you saved the license
update
file that you received via email. Running this command updates the license.bea
file.
Save a copy of your license.bea file in a safe place outside the WebLogic
distribution.
Although no one else can use your license file, you should save this
information
in a place protected from either malicious or innocent tampering.
Regards,
Katie
Jimmy Johns <[email protected]> wrote:
Trying to run the server for WLS 6.1 sp1 after downloading sp1. I had
an
expired license prior to downloading and these still seems to be present
on my PC despite reinstalling everything.
My understanding is that BEA are happy for us to download the server
again when the evaluation license expires - is this the case?
How can I replace the old expired license with the newly downloaded
one?

License error when starting evaluation copy of Weblogic Server 7.0

I have evaluation Copy of bea WL Platform 7.0 on CD.
I installed it, obtained the license key and put it in the BEA home directory.
Tried to run weblogic server, but it would not run and complains that I didn't
have the valid license.
Did somebody have the same problem? Please advise...
Olga

Well, that depends. Does it say the license expired?
Did you put the file with a name of license.bea ?
Wayne Scott
Olga Karol wrote:
I have evaluation Copy of bea WL Platform 7.0 on CD.
I installed it, obtained the license key and put it in the BEA home directory.
Tried to run weblogic server, but it would not run and complains that I didn't
have the valid license.
Did somebody have the same problem? Please advise...
Olga

Windows Server 2008 R2 Std Evaluation Copy showing 'License Expiry' message in just 2 weeks after installation

I have downloaded an 'Evaluation' version of Win Server 2008 R2 Std.
just 2 weeks back. This is a 180
days evaluation copy. This has been installed on the Virtual box.
Now after just 2 weeks, it is showing the message - 'Windows License is expired'. It is getting automatically
shutting down (that
too an abrupt shutdown) after every hour or so without asking to save any work that is already in progress. As this is an 180 days' copy it should run at least for 180 days. Can anyone help me out to get this fixed? Thanks in advance.
Regards,
Nilesh

Hi Nilesh,
Just addition. Please also refer to following similar thread and check if can help you.
Windows
Server 2008 Trial Version License expired after 15 days
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Evaluation license expiring early

I have setup two instances of the Server 2012 Eval for the purposes of testing the failover clustering system with a legacy Oracle database control system. Because of several mishaps, I was required to reload the OS on each machine at least three times
(DirectAccess/RAS refused to be configured, other annoyances).
The problem is the eval license is failing after 30 days. The server displays a "license expired" indication, and then the machine shuts down unexpectedly or stops RPC communications - which tend to stop the test.
I have tried full MS updates and "registering" the trial to no avail.
The trial has been underway for 45 days or so and the OS reloads stopped after the first two weeks. The first machine dropped off last week (forcing an OS reload), and now the 2nd is having the same issues.
Any suggestions other than recreating the machines and moving really fast?
Thanks.

My build 9431 2012 R2 Datacenter Evaluation install has also expired early.
Is this activation process still out of commission? The emails and website indicate that the preview should last 180 days, but it has only been just over 90 for this install. Any tips for getting rid of the Demi-hourly restarts?
Details from the SLmgr.vbs /dlv
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Software licensing service version: 6.3.9431.206
Name: Windows(R), ServerDatacenter edition
Description: Windows(R) Operating System, RETAIL channel
Activation ID: c3dbac02-e65b-48bc-a61e-e14befbdd674
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 03612-01333-250-000010-00-4105-9431.0000-0232014
Product Key Channel: Retail
Installation ID: 725227142924861908450757929654273910439350030537505049645589283
Use License URL: https://activation-v2.sls.microsoft.com/SLActivateProduct/SLAct
ivateProduct.asmx?configextension=Retail
Validation URL: https://validation-v2.sls.microsoft.com/SLWGA/slwga.asmx
Partial Product Key: VQRG7
License Status: Unlicensed
Remaining Windows rearm count: 999
Remaining SKU rearm count: 1000
Trusted time: 2014-01-23 10:06:36 PM

Server 2012 r2 Evaluation copy asking for license key?

So, I'm an old dog trying to learn new tricks - the newest trick being to install Server 2012 R2 Standard with Hyper-V role. After a bit of fumbling around (good story for another time) I have managed to make it to the point of installing the OS onto the
virtual machine I created. Sweet. My understanding from extensive internet research is that I should now use an ISO image of Server 2010 R2 (an ISO of the Evaluation Copy it seems being universally suggested), for installing the OS to the virtual
machine and then subsequently change the license key to my OEM license key using the
slmgr -rearm command. OK, if that is correct I can deal with it. But I have top get it installed first. I have downloaded the following ISO from Technet:
9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5
The setup installation starts up fine, but immediately presents a prompt screen for entering the product key. Huh? I thought evaluation copies did not require a product key to perform the installation. It will not accept my OEM product key, so I am
stumped. Do I have the wrong ISO? I did try a couple of other copies/versions, but they conk out because Windows generates errors saying something to the effect that they are not the right version for the SCSI Synthetic Adapter. So is there
maybe some other ISO's I should be trying? Or, is there some place I am supposed to request a key for the ISO eval copy I have? And, if at some point I am able to get the evaluation copy installed, is my thinking correct about using my OEM key used
to activate the physical host to change the evaluation installation into a regular installation? Or, should be burning an ISO of my OEM installation disk to install from and use my OEM key directly to activate that when doing setup to the
VM?

The eval iso will not accept a oem key, this is by design, oem versions are designed for original hardware only, the eval can be activated with a volume key or I believe a retail key, the licensing agreement is different between the OEM and other
versions.
Appreciate your response. After a lot of late night mucking around was able to get a different evaluation copy to load: This one worked (but not without a bit of a struggle):
9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9
Initially I could not get this evaluation to load as the virtual SCSI adapter kept generating a system error to the effect: "Synthetic SCSI controller [...] Failed to Power on with Error: 'The version does not support this version of the file
format'". Only after moving the ISO file onto the physical drive holding the VHXD containing the VM and messing with security settings on the file did it finally load. This version (vs the other ISO) begins loading by first presenting a list of OS versions
(standard and datacenter variants) to load. From there on the installation pretty much proceeded as would a normal installation would. This version did not ask for an activation key and when finally installed shows a message on the desktop that it is good
for 180 days usage (as Microsoft has stated should be the case). I did encounter two additional problems though that had to be dealt with before success was attained.
1) the install crashed with an error "Windows cannot find the Microsoft Software License Terms. Make sure the installation sources are valid and restart the installation" . That was a head scratcher. After another an hour
of research I came a cross a mention in another forum post about memory issues being the culprit in a similar situation of someone trying to install Windows 8 into a VM. My VM was set to a use dynamic memory with a minimum of 512 MB, which is pretty typically
recommended in the install guides I have been consulting. Wrong. So, I bumped the minimum up to 1024 MB and the problem disappeared.
2) The installation halted when asking for the drive where I wanted the installation to be placed. Problem? No available drives were shown to pick from, i.e. the virtual drive defined in the hyper-V setup simply did not appear. Another
hour of digging online produced a suggestion that the VM install could not recognize the drivers for the raid controller in the physical server. Perplexing. But anyway I loaded a copy of the raid controller drivers onto a USB thumb drive and
manage to mount the thumb drive as a hard drive in the VM settings after which the virtual drive appeared in the list and the installation managed to successfully complete.
So, at this point I have a functional VM operating - albeit with much hair pulling an teeth gnashing along the way. Will spend a bit of time pounding on the system to what else I can break, or breaks on its own. Hopefully nothing because I don't have
much hair left or many teeth left to lose. fingers crossed because I haven't tried to activate the VM OS yet.

Weblogic Server 6.0 evaluation Copy

Hi,
I have installed Weblogic Server 6.0 evaluation Copy using the CD that i got with
the Book J2EE Applications and BEA Weblogic Server.
I was facing the following problems.
1)I was not able to view the output of a HelloServlet.class from the browser using
this address: http://127.0.0.1:7001/HelloServlet/
2) I was not able to View the Administrative Console
using this address: http://127.0.0.1:7001/Console/
3)I was not able to start the weblogic server
Please let me know how to solve the all the above problems in Detail..
Thanks for your help,
Ram

Hi Raj,
Thanks for your reply.
I checked the Licence.bea file.. It is not expired(Date: 11/10/2001). But does
the location of the above file matters in any way?
I just downloaded and placed it in C: drive. If the location/path does matter
where do I place this file(Exact path)
Thanks,
Ram
Raj Alagumalai <[email protected]> wrote:
Ram
Check the license.bea file to make sure the license has not expired.
Try starting the server with the startWebLogic.sh or startWebLogic.cmd
script.
If the license has not expired and if the server starts try the
following url
http://localhost:7001/console
or
http://localhost:7001
Raj Alagumalai
Ram wrote:
Hi,
I have installed Weblogic Server 6.0 evaluation Copy using the CD thati got with
the Book J2EE Applications and BEA Weblogic Server.
I was facing the following problems.
1)I was not able to view the output of a HelloServlet.class from thebrowser using
this address: http://127.0.0.1:7001/HelloServlet/
2) I was not able to View the Administrative Console
using this address: http://127.0.0.1:7001/Console/
3)I was not able to start the weblogic server
Please let me know how to solve the all the above problems in Detail..
Thanks for your help,
Ram

WLS 5.1 SP12 Evaluation Copy - License Expiration error

Similar Messages

Maybe you are looking for