[WLS 8.1.3] - Differences between WLS on XP & HP-UX?
We're getting AbstractMethodError errors in an application that was built using the WLS 8.1.3 libraries on XP. The errors aren't occurring when the same app is built using the WLS 8.1.3 libraries on HP-UX using the same code base. We've swapped the ear files around and the ear file that was built on XP gets errors on either the XP or the HP-UX WLS Server and the ear built on HP-UX runs fine on either OS. The application code base is CVS controlled and is the same on both XP and HP-UX. The build process uses both the weblogic clientgen and servicegen tasks. The same ant build script is used to create both ear files and the only "difference" we can spot is that the WLS installation on XP is using JDK 142_04 and the one on HP-UX is using JDK 142_03. They are both using the JDK that came with WLS and are both at ServicePackLevel="3" and PatchLevel="0".
Anyone got any ideas or had similar problems between the two platforms?
The stack trace of the error we're getting with the XP built ear is:
####<Oct 7, 2004 9:58:11 AM PDT> <Info> <EJB> <JEAGLEMXP> <lnppiServer> <ExecuteThread: '14' for queue: 'weblogic.kernel.Default'> <<anonymous>> <BEA1-00000FF4EB92EBACDA96> <BEA-010051> <EJB Exception occurred during invocation from home: [email protected] threw exception: java.lang.AbstractMethodError: weblogic.xml.schema.binding.BeanCodecBase.getCompositor()Lweblogic/xml/schema/binding/ModelGroupCompositor;
java.lang.AbstractMethodError: weblogic.xml.schema.binding.BeanCodecBase.getCompositor()Lweblogic/xml/schema/binding/ModelGroupCompositor;
at weblogic.xml.schema.binding.BeanCodecBase.gatherContents(BeanCodecBase.java:299)
at weblogic.xml.schema.binding.CodecBase.serializeFill(CodecBase.java:285)
at weblogic.xml.schema.binding.CodecBase.serialize_internal(CodecBase.java:222)
at weblogic.xml.schema.binding.CodecBase.serialize(CodecBase.java:181)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:188)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:174)
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:324)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:645)
at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:206)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:143)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:290)
at com.qwest.lnppi.portedTNservice.PortedTelephoneNumber_Stub.getPortedTelelphoneNumber(Unknown Source)
at com.qwest.lnppi.business.port.PortedTnBean.portedTnWS(Unknown Source)
at com.qwest.lnppi.business.port.PortedTnBean.portedTn(Unknown Source)
at com.qwest.lnppi.business.port.PortedTnEjb_rn88fn_EOImpl.portedTn(PortedTnEjb_rn88fn_EOImpl.java:98)
at com.qwest.lnppi.business.svc.GetCurrentServiceProviderSwitch.getCurrentServiceProviderSwitch(Unknown Source)
at com.qwest.lnppi.business.svc.LnppiServiceBean.getPortingOptions(Unknown Source)
at com.qwest.lnppi.business.svc.LnppiServiceEjb_tk1dpv_EOImpl.getPortingOptions(LnppiServiceEjb_tk1dpv_EOImpl.java:46)
at com.qwest.lnppi.web.lnppiTester.Tester.CallTheBean(Unknown Source)
at com.qwest.lnppi.web.lnppiTester.Tester.TestIt(Unknown Source)
at jsp_servlet.__tester._jspService(__tester.java:157)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:312)
at com.qwest.lnppi.web.lnppiTester.pgMgr.doTestIt(Unknown Source)
at com.qwest.lnppi.web.lnppiTester.pgMgr.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>
I am getting similar stuff using WebLogic 8.1.3 running on Windows XP with JDK1.4.1_03 or JDK1.4.2_05. Please let me know if you found a work-around. Thanks...
java.lang.AbstractMethodError: weblogic.xml.schema.binding.BeanCodecBase.getCompositor()Lweblogic/xml/schema/binding/ModelGroupCompositor;
at weblogic.xml.schema.binding.BeanCodecBase.writeElementContents(BeanCodecBase.java:389)
at weblogic.xml.schema.binding.BeanCodecBase.writeContents(BeanCodecBase.java:355)
at weblogic.xml.schema.binding.CodecBase.writeTypeAndContents(CodecBase.java:409)
at weblogic.xml.schema.binding.CodecBase.serializeLiteral(CodecBase.java:318)
at weblogic.xml.schema.binding.CodecBase.serialize_internal(CodecBase.java:232)
at weblogic.xml.schema.binding.CodecBase.serialize(CodecBase.java:178)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:188)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:174)
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:324)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:619)
at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:206)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:143)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:270)
at com.adsk.cer.ejb.generated.DmpExtractorSoap_Stub.createJob(DmpExtractorSoap_Stub.java:33)
at com.adsk.cer.ejb.ErrorReportHandlerBean.callDmpInfoWebService(ErrorReportHandlerBean.java:282)
at com.adsk.cer.ejb.ErrorReportHandlerBean.onMessage(ErrorReportHandlerBean.java:56)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Similar Messages
-
Difference between WLS 6.0 & 6.1 (SP1)?
I'm looking for a document that will tell me the differences between WLS 6.0
and 6.1 (SP1). If there is such a document, would someone please send it to
me? Please forward that to: mailto:[email protected]
If there is no such document, I need to find out the best way I can get this
data.
Thank you.
Daniel HinojosaDaniel,
There is a migration document at
http://edocs.bea.com/wls/docs61/notes/migrate60to61.html#999118
daniel hinojosa wrote:
I'm looking for a document that will tell me the differences between WLS 6.0
and 6.1 (SP1). If there is such a document, would someone please send it to
me? Please forward that to: mailto:[email protected]
If there is no such document, I need to find out the best way I can get this
data.
Thank you.
Daniel Hinojosa--
Developer Relations Engineer
BEA Support -
Differences between WLS and WLE
Can anyone enumerate the differences between weblogic server, and
weblogic enterprise?
It appears to be a much smaller platform support, and corba/ tuxedo
stuff. Is that
all?
Just trying to nail down some questions as I wait for weblogic sales
department/person
to call back. ;)
Thanks,
Kenneth ToppI suggest starting with the marketing materials on our external website:
http://www.BEA.com
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Kenneth Topp" <[email protected]> wrote in message
news:[email protected]..
Can anyone enumerate the differences between weblogic server, and
weblogic enterprise?
It appears to be a much smaller platform support, and corba/ tuxedo
stuff. Is that
all?
Just trying to nail down some questions as I wait for weblogic sales
department/person
to call back. ;)
Thanks,
Kenneth Topp -
The difference between connectors and adapters?
Could someone give me a "dummies guide" to the differences between an adapter and
a connector. Aren't they really just one in the same?hi
you can get more information at
http://e-docs.bea.com/wls/docs70/jconnector/connect.html#1232143
Regards
Prasanna Yalam -
Differences Between JDev BC4J/JClient Versions
Hi,
I'm finding key differences between library versions of my BC4J and JClient libraries which are introducing bugs into my application. What once ran properly no longer runs properly in JDev 10.1.2. What makes this particularly interesting is that the Application Server has the older libraries (which work) while JDeveloper 10.1.2 has the new libraries (which have the issues). I was wondering if anyone could point me to a document of all the changes in BC4J and JClient between releases.
Here are two of the differences I'm seeing...
1. In the older BC4J lib (deployed by default with the 10g app server) using a ViewCriteria to select a ROW with a CHAR[7] using a string with less than 7 characters works fine. It simply does a standard CHAR[7] comparision, treating the missing characters as spaces, and finds a match. ie "select * from MY_TABLE where KEY='AA' finds the key with 'AA ' and it shows up in my results as I desire.
In the newer BC4J lib, while the same select statement runs (and finds the row) the BC4J libraries seem to be doing a post processing in the ViewCriteria which HIDES this row from me. I have to manually PAD my input string in Java before putting it into the ViewCriteria to get it to work. (And no, the database can't be changed to a VARCHAR for other reasons.)
2. The JFACE library's ScrollablePanel has no trouble creating a scrollable panel with a table for my ViewObject in the old version of the JFACE library. However, the new version of the JFace library has a problem where scrolling the panel shows many blank rows, until I actually click on a row, at which point the internal ViewObject cursor moves forward and loads that data (and hides the earlier data).
This is annoying as I really would prefer to be able to upgrade to new libraries when they come out. But instead I'm having to download the older libraries and put them into JDeveloper instead.
a. Can anyone point me to a document listing all changes between BC4J and JFace library versions?
b. Does anyone know of a better way to work around the issues I'm seeing above? They're really annoying.
Thanks,
DougHi,
I use weblogic 10.3.4 with Application Development Runtime (11.1.1.2.0) and JDev 11.1.1.4.i assume you are using standalone wls 10.3.4 with Application Development Runtime (11.1.1.2.0).
But jdeveloper 11.1.1.4 has ADR 11.1.1.4.0 .. It would create some incompatabilities.
Betw:
you can install ADR from jdeveloper setup also, just uncheck the jdev and wls studio installation when installing ADR from jdev, It will also prompt for the wls home.
Regards,
Santosh.
Edited by: Santosh Vaza on Apr 23, 2011 4:52 PM -
A CONFUSION:The difference between cluster and multi-IP--DNS mapping??
I have a test about simplest cluster,admin and managed server all told me "start
cluster service"!the two IP address use ONE DomainName,If one down,when I send
request with dn,It first look up admin server,no found and then go dns to search
another server,about one minute then the server send response to me!
But when I do not config a cluster,only start two admin server and give them the
same dns,the same appearance as cluster!
I don't understand the difference between cluster and multi-IP--DNS mapping??
<[email protected]> wrote in message news:3b16f1db$[email protected]..
|
| I have a test about simplest cluster,admin and managed server all told me
"start
| cluster service"!the two IP address use ONE DomainName,If one down,when I
send
| request with dn,It first look up admin server,no found and then go dns to
search
| another server,about one minute then the server send response to me!
|
This is DNS fail-over.
| But when I do not config a cluster,only start two admin server and give
them the
| same dns,the same appearance as cluster!
| I don't understand the difference between cluster and multi-IP--DNS
mapping??
It is totally different. regarding the last failover example you've given,
of course the 2 servers can have identical files maintained under
public_html. DNS will failover requests to "foo.html" to the other one if
the first server is down, but if you have something saved in a session, say
shopping cart example, it's totally lost, but with WLS clustering, the
session is replicated to the other server in the cluster, you may just
check-out, don't have to order again.
This is just a simple example of WLS cluster session-replication. WLS
supports EJB, RMI Objects, JMS (6.0) clustering.. check the doc at
http://www.weblogic.com/docs50/cluster/index.html
-
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework for
building the web service is better and more adaptable and Workshop provides a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0 have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.If you want to take existing WLS6.1 web services and convert them to WLS7.0 you can
do so quite easily. The WLS7.0 Ant still supports wsgen so you do not need to even
change your build.xml file. The generated web service however will be implemented
is a manner compliant with the WLS7.0 environment. More details are at:
http://e-docs.bea.com/wls/docs70/webServices/anttasks.html#1070576
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services
cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality
than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach
of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework
for
building the web service is better and more adaptable and Workshop provides
a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0
have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps. -
Difference between app-jazn and system- jazn files
Hi ,
Im working in JDEV 11g. Can anyone explain me the difference between appjazn and systemjazn files.
Thanks in advance.Hi,
system-jazn is used at runtime in WLS. app-jazn is used to store the ADF Security permissions at design time
Frank -
What's the difference between the notion of virtual hostname and of host name
Hi everybody,
Sorry for this stupid question, but I don't see the real difference between the
notion of virtual host managed by WLS and the notion of host names managed by
a DNS. With the admin console of WLS, I can create a virtual host, e.g. www.toto.com
, and associate it with a WLS cluster for example. But with the DNS, I must also
bind 'www.toto.com' to the list of WLS servers contained in the cluster above
in order to be sure that WLS can make load-balancing. (See WLS clusters documentation).
Can somebody show me an example of the use of virtual hosts and hostnames, which
can help me to understand the differnece between?
Thanks for your help
Vincent
HI
Basically Name Based Virtual Hosts are helpful to give multiple names to be tied
to a single IP Address rather than IP Based Virtual Hosting. In your case if your
virtual host name www.toto.com which basically served by the weblogic cluster
instances need to be configured by DNS server so that using this technique many
different hosts can share the same IP address. We need to configure DNS server
to map each host name to the correct IP address.
regards
Sasikanth
"Vincent Ducret" <[email protected]> wrote:
>
>Hi everybody,
>
>Sorry for this stupid question, but I don't see the real difference between
>the
>notion of virtual host managed by WLS and the notion of host names managed
>by
>a DNS. With the admin console of WLS, I can create a virtual host, e.g.
>www.toto.com
>, and associate it with a WLS cluster for example. But with the DNS,
>I must also
>bind 'www.toto.com' to the list of WLS servers contained in the cluster
>above
>in order to be sure that WLS can make load-balancing. (See WLS clusters
>documentation).
>
>Can somebody show me an example of the use of virtual hosts and hostnames,
>which
>can help me to understand the differnece between?
>
>Thanks for your help
>Vincent
-
What is the difference between WebLogic Server users and Portal users
Hi All
What is the difference between users created in the WebLogic server and those
created from the webLogic Portal Admin console.
- leoHi Leo,
The WebLogic server console allows you to create users in the File realm (
http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1057106 , "Defining
Users" ).
The WebLogic Portal Admin console creates Portal users in the alternate security
realm that was written to store user/password in the Portal schema. This realm is
com.bea.p13n.security.realm.RDBMSRealm. See the javadoc for RDBMSRealm at (
http://edocs.bea.com/wlp/docs40/javadoc/wlp/com/bea/p13n/security/realm/RDBMSRealm.html
For information on alternate security realms see
http://e-docs.bea.com/wls/docs61/security/prog.html#1041025 , "Writing a Custom
Security Realm".
For information on the File realm see
http://e-docs.bea.com/wls/docs61/ConsoleHelp/security.html , "Security" and also
search the WLS 6.1 docs for "File realm" for lots of other references.
Leo wrote:
Hi All
What is the difference between users created in the WebLogic server and those
created from the webLogic Portal Admin console.
- leo--
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com -
Is there any difference between sun solaris 8 and windows for Garb.Collecti
Hi All,
is there any difference between refreshing the java virtual memory between sun solaris 8 and windows.i am fetching 25 records for every search action.in windows usage of java virual memory is 5 mb after every search it refreshes the memory.while using the same code in sun solaris 8 it throws heap out of memory error and for every search it wont refresh the memory.Some other related links
http://java.sun.com/docs/hotspot/gc5.0/gc_tuning_5.html
http://e-docs.bea.com/wls/docs81/perform/JVMTuning.html -
Hi!
When deploying a WAR to WebLogic 10.3.5, what is the difference between the prefer-application-packages element in the files weblogic.xml and weblogic-application.xml?
In my WARs WEB-INF/lib/ I have a JAR that contains classes that are already provided by the container (but older versions).
If I do not use prefer-application-packages then my app gets the classes provided by the container.
If I use prefer-application-packages in weblogic.xml then I get the classes from WAR/WEB-INF/lib which is expected.
But if I use prefer-application-packages in weblogic-application.xml then I get the container versions. Why?
Is there a difference between those two options?
The exact data I use is:
(foo.bar.* is the conflicting package; I add or remove the linex marked with XXXX)
WEB-INF/weblogic.xml :
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app
xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.2/weblogic-web-app.xsd">
<wls:container-descriptor>
<wls:show-archived-real-path-enabled>true</wls:show-archived-real-path-enabled>
<wls:prefer-application-packages> <!-- XXXX -->
<wls:package-name>foo.bar.*</wls:package-name> <!-- XXXX -->
</wls:prefer-application-packages> <!-- XXXX -->
<wls:prefer-application-resources>
<wls:resource-name>META-INF/services/some....</wls:resource-name>
<wls:resource-name>META-INF/services/unrelated...</wls:resource-name>
<wls:resource-name>META-INF/services/stuff...</wls:resource-name>
</wls:prefer-application-resources>
</wls:container-descriptor>
<wls:jsp-descriptor>
<wls:page-check-seconds>-1</wls:page-check-seconds>
<wls:precompile>true</wls:precompile>
<wls:precompile-continue>true</wls:precompile-continue>
<wls:keepgenerated>true</wls:keepgenerated>
</wls:jsp-descriptor>
<wls:session-descriptor>
<wls:persistent-store-type>replicated_if_clustered</wls:persistent-store-type>
</wls:session-descriptor>
</wls:weblogic-web-app>
META-INF/weblogic-application.xml :
<?xml version="1.0" encoding="UTF-8"?>
<weblogic-application
xmlns="http://xmlns.oracle.com/weblogic/weblogic-application"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/javaee_5.xsd http://xmlns.oracle.com/weblogic/weblogic-application http://xmlns.oracle.com/weblogic/weblogic-application/1.2/weblogic-application.xsd">
<application-param>
<param-name>webapp.encoding.default</param-name>
<param-value>UTF-8</param-value>
</application-param>
<xml>
<parser-factory>
<saxparser-factory>
org.apache.xerces.jaxp.SAXParserFactoryImpl
</saxparser-factory>
<document-builder-factory>
org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
</document-builder-factory>
<transformer-factory>
org.apache.xalan.processor.TransformerFactoryImpl
</transformer-factory>
</parser-factory>
</xml>
<prefer-application-packages>
<package-name>foo.bar.*</package-name> <!-- XXXX -->
<package-name>javax.jws.*</package-name>
<package-name>javax.xml.ws.*</package-name>
<package-name>org.apache.cxf.*</package-name>
<package-name>antlr.*</package-name>
<package-name>org.xmlsoap.schemas.wsdl.*</package-name>
</prefer-application-packages>
</weblogic-application>weblogic-application.xml has no meaning in WARs, it is only used in EARs.
-
Difference between DataSource & JDBC Data Source Factory
Hi,
Can anyone tell me what the difference between a 'DataSource' and 'JDBC Data Source
Factory' is ? I see both these on the Weblogic admin console. I have reviewed
the documentation but it is not clear to me what the difference between the two
is and what situations each on is appropriate for.
Thanks,
RajuHi Sree,
I have read literally ALL the online documents related to JDBC Data Source Factories
including the one you provided below, but I still do not understand what they
are for. I have also searched in Google but to no avail.
I will try to be more specific as to where my confusion lies.
1)Why would anyone ever choose a JDBCData Source Factory instead of a Tx Data
Source or plain vanilla (not XA) Data Source? EJBs connect just fine with the
latter 2.
2)What should go inside the properties box?
a) http://e-docs.bea.com/wls/docs70/ejb/EJB_environment.html#resourcefact states
that connection properties should go in here
b)Then, the document goes on to describe a syntax for binding a Connection Pool
to a JNDI name, all in the properties box. I have never been able to successfully
create a data resource factory with a JNDI name. I get no errors, but it appears
no where in the JNDI tree
c)If this mysterious syntax associates a resource factory with an existing Connection
Pool, then why go through all the fuss of redefining the Driver Class Name, URL,
etc., when those are already defined on the Connection Pool?
When you setup either a Data Source or a TX Data Source, WebLogic does not require
that information since it was all setup in the pool. Why is it needed here?
Thanks in advance for you help.
"Sree Bodapati" <[email protected]> wrote:
Hi Raju,
Please see,
http://e-docs.bea.com/wls/docs70/ConsoleHelp/domain_jdbcdatasourcefactorytable.html
sree -
Difference between pack/unpack and T2P (copyConfig/copyBinary)
Hi Experts,
I have a requirement to clone WLS 10.3.3 running SOA and OHS. I am facing some issues (encountering NPE on running copyBinary.sh and extractMovePlan.sh file is missing) while doing T2P for OHS. I see pack.sh and unpack.sh can be used to make WLS domain templates and create new domains on different machines/hosts.
Please let me know what is the difference between the two approaches T2P and pack.sh/unpack.sh. Also please suggest which is the recommended approach.
Note: I am new to WLS, so please don't mind if my question is trivial or doesn't make sense.
Thanks
RathnamBelow is the Stack Trace for NPE:
=======================================================================================
Null Point Exception Error:
bash-3.2$ /than8o/fmw/product/111/oracle_common/bin/copyConfig.sh -javaHome /than8o/fmw/jrmc-4.0.0-1.6.0 -al /ptsadmin/FMW_clone/config/OHS_CopyConfig.jar -sourceInstanceHomeLoc /than8o/fmw/product/111/ohs_instances -sourceComponentName ohs1
Log File: "/tmp/CLONE2012-09-19_03-56-21PM-LOG/CLONE2012-09-19_03-56-21PM.log".
Error File: "/tmp/CLONE2012-09-19_03-56-21PM-LOG/CLONE2012-09-19_03-56-21PM.error".
To proceed, type "yes":yes
INFO : Sep 19, 2012 3:19:23 PM - CLONE-21095 Create archive for instance1@ohs1 started ...
java.lang.NullPointerException
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getClonableEntityTypes(CloningFrameworkClassLoader.java:162)
at oracle.as.clone.classloader.CloningFrameworkClassLoader.<init>(CloningFrameworkClassLoader.java:254)
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getInstance(CloningFrameworkClassLoader.java:222)
at oracle.as.clone.cloner.component.ComponentCreateCloner.doClone(ComponentCreateCloner.java:66)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:56)
at oracle.as.clone.request.CreateGenericArchive.doGenericArchive(CreateGenericArchive.java:128)
at oracle.as.clone.request.CreateCloneRequest._clone(CreateCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:145)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:128)
at oracle.as.clone.client.CloningClient.executeCloneCommand(CloningClient.java:123)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:83)
oracle.as.clone.exception.FMWCloningException: java.lang.NullPointerException
at oracle.as.clone.classloader.CloningFrameworkClassLoader.getInstance(CloningFrameworkClassLoader.java:227)
at oracle.as.clone.cloner.component.ComponentCreateCloner.doClone(ComponentCreateCloner.java:66)
at oracle.as.clone.cloner.Cloner.doFinalClone(Cloner.java:56)
at oracle.as.clone.request.CreateGenericArchive.doGenericArchive(CreateGenericArchive.java:128)
at oracle.as.clone.request.CreateCloneRequest._clone(CreateCloneRequest.java:69)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:145)
at oracle.as.clone.process.CloningExecutionProcess.execute(CloningExecutionProcess.java:128)
at oracle.as.clone.client.CloningClient.executeCloneCommand(CloningClient.java:123)
at oracle.as.clone.client.CloningClient.main(CloningClient.java:84)
Caused by: java.lang.NullPointerException
=======================================================================================
Basically I am looking at knowing the difference between pack/unpack and T2P using copyConfig/copyBinary/extractMovePlan.
Thanks
Rathnam -
Differences between 7.0 and 7.1
Hi.
Can anyone point me in the direction of where I could find the differences between Netweaver 7.0 and 7.1?Are there release notes anywhere on the sap site?
Many thanks
AndrewThanks. I read that document before though. I was wondering if anyone xould
do a point by pont compare but I will keep looking. What it comes down to, I
think, Is that I need to get 6.1 with the option to upgrade to 7.0 when its
ready for Linux.
Robert Simmons Jr.
Senior Software Engineer
Ingenium Pharmaceuticals, Munich Germany.
"Michael Young" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
Hi.
The following link spells out what is new in WLS 7 compared to WLS 6.x.
The major differences are webservices and JCOM.
http://edocs.bea.com/wls/docs70/notes/new.html#1068049
Regards.
Michael
Robert Simmons wrote:
I downloaded 7.0 and have been playing with it on my windows machine
although our deployment environment is SuSE 8.0 on intel. Now my rep is
tellign me that i will have to downgrade to 6.1 to get it to work on my
deployment platform. What features will I loose in the downgrade?
Robert Simmons Jr.
Senior Software Engineer
Ingenium Pharmaceuticals, Munich Germany.
Michael Young
Developer Relations Engineer
BEA Support -
Ok so I believe I know the answer here but asking anyway.
What is the difference between the adobe creative cloud team license vs the adobe creative cloud enterprise license?
is the team licence basically individually licences products per account users?
and is the enterprise one license that covers multiple users at once?
Thanks and sorry for the question but had to verify.Hi tbirdbrent ,
Thank you for posting on the forums, the answer to your question is as follows.
1) Creative Cloud for teams brings together the very latest Creative Cloud desktop apps, updates and upgrades the moment they’re released, and all of the services and business features your team needs to create their best work and collaborate with their peers. Adobe offers two Creative Cloud for teams plans — you can opt for a complete plan (all apps and services) or a single-app plan such as Photoshop CC (access to one app and select services). With each option, you’ll receive access to the same easy-to-use web-based admin console that allows the administrator to centrally purchase, deploy, and manage all seats across your organization — whether single app or complete — under one membership agreement.
2) Creative Cloud for enterprise is for organizations with large deployments that require centralized provisioning and customized deployment of apps and services. Enterprises also receive enterprise customer support and expert services. Creative Cloud for enterprise also works with Digital Publishing Suite; Adobe Anywhere for video; and Adobe Marketing Cloud, which includes Adobe Experience Manager — all sold separately.
Also, the team licences is not individually licences products per account users and the same goes with the enterprise license.
Thanks,
Vikrantt Singh
Maybe you are looking for
-
My iPad is downloading my video purchases automatically, but it's only downloading two episodes from Supernatural S10 that I have watched and deleted. I can't stop it from downloading, and I can't download anything else because of it. I don't know wh
-
Foreign currency valuation (new) for vendors and costumers open items
Dear friends, Is there any option that when i run the foreign currency valuation program (fagl_fc_val) for vendors and costumers open line items not to generate the reverse posting? I have read in the sap library that the reverse posting is optional
-
Reader XI - View documents in PDF/A mode - document links not disabled
I am using Adobe Reader XI and I have the option PDF/A View Mode set as; View documents in PDF/A mode: Only for PDF/A documents My colleague has the same set up We both see the message when opening the same pdf that the 'the file claims compliance wi
-
How do i track a stolen ipod touch
how do i track a stolen ipod touch
-
How to Create Track in NWDI for CRM ISA 5.0
hi can anyone please suggest me how to create track in NWDI for CRM ISA 5.0 for different archive files which consists of source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.) and as well as empty source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWE