WLS Policies and WCF interoperability issue

Hi all,
I have created a web service in jdeveloper 11g which I have deployed to an Stand Alone Weblogic Server 10.3.
The service uses the policy Wssp1.2-2007-Https.xml. I have generated a consumer in Jdeveloper 11g for the service, and it works perfectly.
However I have the requirement of a consumer in C#, I've used svcutil to generate the client but I'm getting the following warning:
A security policy was imported for the endpoint. The security policy contains requirements that cannot be represented in a Windows Communication Foundation configuration. Look for a comment about the SecurityBindingElement parameters that are required in the configuration file that was generated. Create the correct binding element with code. The binding configuration that is in the configuration file is not secure.
In the WSDL I have:
<wsp:UsingPolicy wssutil:Required="true"/>
<wsp:Policy wssutil:Id="Wssp1.2-2007-Https.xml">
<ns0:TransportBinding>
<wsp:Policy>
<ns0:TransportToken>
<wsp:Policy>
<ns0:HttpsToken/>
</wsp:Policy>
</ns0:TransportToken>
<ns0:AlgorithmSuite>
<wsp:Policy>
<ns0:Basic256/>
</wsp:Policy>
</ns0:AlgorithmSuite>
<ns0:Layout>
<wsp:Policy>
<ns0:Lax/>
</wsp:Policy>
</ns0:Layout>
<ns0:IncludeTimestamp/>
</wsp:Policy>
</ns0:TransportBinding>
</wsp:Policy>
Do I have to select a different policy?
Am I missing something?
Thanks,
Miguel.

Similar Messages

SCCM Policies and SCEP Deployment Issues

I'm having several issues with SCCM 2012 R2.
I have inherited an existing SCCM 2012 R2 installation. The company does not want me to rebuild it from the ground using best practices, so I'm doing what I can with it.
Issue #1: SCEP does not auto deploy to new systems;
Issue #2: Client policies do not update;
Issue #3: Anti-malware policies do not update.
Starting out, I guess I need to look at issue #2 before I look at the others.
The client is auto-deploying as far as I can tell. I do not have any GPO’s that push the software to the clients, so it appears that the system wide deployment of the client is working correctly.
As for the policies not being updated, I have created a new policy that is assigned to newly defined device collections.
I have check the membership of the collections and it is populating/selecting the assets correctly.
I have picked a handful of computers out of the collection to use for information gathering.
Looking at the log files, it shows that it is applying policies, but it does not identify which policy from the SCCM server.
With the new policies that I’ve created, I’ve enabled ‘Endpoint Proection’, ‘Hardware Inventory’, ‘Power Management’, ‘Remote Tools’, ‘Software Deployment’, ‘Software Metering’, and ‘User and Device Affinity’.
After 13 days, the options within the policy have not taken effect as I have check the clients and the settings from the ‘Remote Tools’ and ‘Power Management’ haven’t been applied. I waited this long since several of the settings were set at 7 days before
re-evaluation.
I’m not sure where to go next on this issue.
On the issue #1 & 3, the computers that did get the initial config push and SCEP install, before I came on, are operating and reporting back to the SCCM manager that they are in a managed state, which is fine, but they are not applying any newly defined
policies. Checking the logs on the clients show that they are applying the Default Client Settings and not any of the other policies that are set to deploy to All systems or any other collection I’ve defined.
Also checking the anti-malware policy logs on the clients, they are also still applying the Default Client Antimalware Policy, not any of the custom policies, just like the SCCM client issue. In the EndpointProtectionAgent.log, i have several lines
showing "Deployment WMI is NOT ready." The same is in several of the other log files, so I've check that all the WMI services are running and I have tested management with the PoshCat utility and all of the commands are working in there and
the output reports all seem to be reporting correctly.
Any pointers or starting points would be greatly appreciated.

For the 'Client Settings', I have 4 listed. Default Client Settings, EP Settings (existing that I have set to deploy to a group that only has 1 computer left in it), Server Policy, and Workstation Policy (applies to all clients that have 'workstation'
in the version name).
For SCEP, just 2. Default Client and Custom SCEP.
The inventory and software distribution... let's look at the inventory function. I have nothing showing in '\Assets and compliance\Overview\Asset Intelligence\Inventoried Software'.
As for software distribution, I am not sure how to check that -- I haven't set up any deployed software packages yet... but the SCEP and Windows Updates are the only things showing up. SCEP is not deploying to any new workstations, but it appears all
the Windows Updates are deploying correctly to all the workstations.
I just checked the SrcUpdateMgr.log on a client and I've found several lines of 'Instance of CCM_SourceUpdateClientConfig doesn't exist in WMI'
Checking the SoftwareCatalogUpdateEndpoint.log file, I have several lines that just repeat...
Software catalog update endpoint is starting
Logo event received
Logon user SID: [...]
Retrieving URL for software Catalog
Software Catalog update endpoint is loading
Received notification for client agent setting or portal information change
Retrieving URL for Softwware Catalog
Making call to determin whether catalog Url should be added to the trusted sites zone
Updating the registry for Software Catalog for user '[...]'
Notification system applicaton: C:\Windows\CCM\UpdateTrustedSites.exe
Started UpdateTrustedSites process
Making call to determine whether keys to enable Silverlight elevated trust should be added
Enable elevated trust is set to false. Setting the keys to 0
CSoftwareCatalogUpdateHandler::UpdateSilverlightRegistry: Successfully set elevated trust on this client for Silverlight
CSoftwareCatalogUpdateHandler::UpdateSilverlightRegistry: Successfully set elevated trust on this client for Silverlight
CSoftwareCatalogUpdateHandler::UpdateSilverlightRegistry: Successfully set elevated trust on this client for Silverlight
Received notification for client agent setting or portal information change
and it does show the Silverlight lines 3 times each time in the repeats. The repeat time stamp looks like it happens alternating 20 minutes, then 2 hours, then 20 minutes, then 2 hours, etc.
KW

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)
where i couldn't see any police command under the policy map

I have tested this issue on another 5548UP with L3 running the same NX-OS version and get the same problem. Show CDP from the switch is not discovering devices, but the neightbors can see the 5K in question. Reboot sometimes will fix it, but not always. I suspect a problem with the software since that doesn't happen in NX-OS 5.2. The one I am using is
Software
BIOS:      version 3.6.0
loader:    version N/A
kickstart: version 5.1(3)N2(1)
system:    version 5.1(3)N2(1)

Sysvol directory contains two policies and scripts

Hello,
I have a question
Why I have two policies and scripts under my AD Sysvol?
Omar A. G. Dweik Senior System Engineer Qatar - Doha

Hello,
Thanks for your quick replay
what version of AD are you using? Windows 2008 R2
someone manually create Policies and scripts folders on another DC? yes
Have you seen any errors in the logs for FRS replication on any of your DC's? I will check
Thanks
FZ2H
why did someone manually create the folders? this shouldn't be needed and will be what has caused this issue
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Does Mavericks fix interoperability issues using Samba?

Has anyone who has gotten Mavericks to work experimented with it as a server for Windows shares using Samba? This has been a long-standing interoperability issue with OS X and I'm wondering if Apple has fixed it with this release?

I usually do it by doing something like this from a client...
curl -I http://bnesse6/NetBoot/NetBootSP0/NetBoot_DS_Test.nbi/NetInstall.dmg
or
curl http://bnesse6/NetBoot/NetBootSP0/NetBoot_DS_Test.nbi/NBImageInfo.plist
The first line should connect an pull header info, the second one should fetch the NBImageInfo.plist.
Be aware that this is harder when you have spaces in the pathname.

Is there an option to have the location of the file on each document? (ie. S:\Policies and Procedures\Work Day\Time Sheet.xlsx)

Is there an option to have the location of the file on each document? (ie. S:\Policies and Procedures\Work Day\Time Sheet.xlsx)
I am looking for an option that will allow this on each of our documents for an easy access. It may already have an option, I am just unaware of it. Any help would be greatly appreciated.

For starters, can you tell us what software you are talking about? I can assume Adobe Reader but you use .xls in your example.
If you are talking about Adobe Reader and pdf files, then unfortunately the answer is no. If something else, please be descriptive about the issue so we can guide you to the right place.

Problem with Group policies and Administrator count

I have one problem with Group policies and Admnistrator count.
Win XP, Client 4.91, Client Zen 4
I use DLU for users.
the Group policies are well applied and i keep them after logout for
security reasons.
But my problem is, after logout, the Administrator count becomes this
Group policies, and the only technique that I use, is to remove the
repertories c:\windows\system32\GroupPolicy*. Administrator must
loguing again for having good policies.
Can you help me?

Bill,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Macbook Pro stolen abroad, registered by the police and by Apple

My Macbook Pro was stolen in Germany, after which I registered by the local police and then by Apple services a few days later for the Diebstahl, so that they can inform me, once the device is sent to get repaired. Problem is, I did receive an email from Apple enquiring me of the repairing situation and I did wrote back, stating that the device was stolen, yet I haven't received any reply. I checked in my Apple Support yesterday, and there's a record of the whole repairing procedure. I called my Service for help but they told me that I should contact the german Apple, because I've lost the device in Germany... Is there any way to contact them by writing to them instead of calling, for it costs...I'd be grateful if any one could provide me with a link.

Sorry, this is just a users' forum. We are not able to assist you with the issue. You will need to contact Apple as you have been.

Gmail/Exchange email and calendar syncing issues

I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!

Hi JadeyMU,
How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My experience with Apple TV and HDMI/HDCP issues

I am convinced that it is the software update to 4.2.2 from 4.2.1 that is causing this issue. All forms of applications only worked once for me and then it reverted back to HDCP issues. I read several postings everywhere including plenty at Apple's forum and AVS where people were very frustrated with this HDCP issues. Anyways, here is what I did before taking it back to Apple store....I bought AUVIO high speed cables from Radio Shack which is rated very high and tried that and I still got HDCP issues when using NetFlix or AirPlay from iPad. Youtube from Apple TV always worked well without HDCP complaints.
I packed everything back and took it to Apple Store (you can return without re-stocking fee up to 14 days from the day of purchase). After 14 days, you cannot even return it and you can ONLY fix it. I waited for a Technician. They heard my complaints but didn't refute any of it (possibly because they have had numerous complaints on this product). It took 5 minutes inside for them to test and see similar issues with the box that I had. So, they have swapped it for a new box. Before I left the store, I checked the settings including software version and Audio/Video settings in the Apple TV that is connected at the store. I found three main differences none of which the Apple customer service staff agreed could be the reason for my problems (surprise!!)
1. The software update from the shelf and the one they were using was NOT updated to 4.2.2 (it was still running 4.2.1)
2. Because of the software update, the Audio/Video setting for HDMI had the options to toggle between Auto, RGBy, RGBhi & RGBlo bandwidth. I believe this was in place to make the HDMI interface output as component with higher or lower bandwidth but the newer update will ONLY give you the Auto option (!!!)
3. They had this directly Ethernet wired and not through Wireless network and were recieving the all the full bar strength signals. On the box that I returned, eventhough I have 18 Mbps speed at the house (any given time of the day), the Network speed test was taking a long time. Moreover, after the Apple TV network test, it doesn't spit out the outcome of the tests (a BIG bummer and useless for testing).
Anyways, I took the new box and hooked it up directly to my SONY BRAVIA XBR3 TV to one of the HDMI ports, disabled the feature to send or recieve data to Apple directly and did NOT update the software. It worked fine and have tested all of the options. From what I have read so far (I have only spent 30 hours of my weekend on this when Apple product hookups are supposed to take 5 minutes ONLY), there is NO guarantee that it will work continuously as people have had things work on them for 6 months and then suddenly have the HDCP issues.
Will wait to see....if it continues to work....

I figured it out. Had to go to general settings on the main screen and restart. Synch of audio is much better.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Interesting and an imporatant issue at sales order schedule line.

hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date                      Material availabilyt date   delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date                      Material availabilyt date   delivery date
28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumar

can any one repsond for this.....

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Report Builder - Last page issue and Report Footer issue

I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.

To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

WLS Policies and WCF interoperability issue

Similar Messages

Maybe you are looking for