WLS10.3 and wssp1.1 policies support
Hi,
I try to use SAML policies in OSB 10.3 ( ALSB). But the OSB only supports the wssp1.1 policies and the web services I try to call in the OSB are deployed on a wls 10.3 server which supports the wssp1.2 policies
Can I use the wss1.1 policies on a wls 10.3 server
I want to use the wssp1.1 saml1.1 sender vouches policy
thanks Edwin
Try this policy:
<?xml version="1.0"?>
<wsp:Policy
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
>
<sp:AsymmetricBinding>
<wsp:Policy>
<sp:InitiatorToken>
<wsp:Policy>
<sp:X509Token
sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">
<wsp:Policy>
<sp:WssX509V3Token10/>
</wsp:Policy>
</sp:X509Token>
</wsp:Policy>
</sp:InitiatorToken>
<sp:RecipientToken>
<wsp:Policy>
<sp:X509Token
sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/Never">
<wsp:Policy>
<sp:WssX509V3Token10/>
</wsp:Policy>
</sp:X509Token>
</wsp:Policy>
</sp:RecipientToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Lax/>
</wsp:Policy>
</sp:Layout>
<sp:IncludeTimestamp/>
<sp:ProtectTokens/>
<sp:OnlySignEntireHeadersAndBody/>
</wsp:Policy>
</sp:AsymmetricBinding>
<sp:SignedSupportingTokens>
<wsp:Policy>
<sp:SamlToken
sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">
<wsp:Policy>
<sp:WssSamlV11Token10/>
</wsp:Policy>
</sp:SamlToken>
</wsp:Policy>
</sp:SignedSupportingTokens>
<sp:Wss10>
<wsp:Policy>
<sp:MustSupportRefKeyIdentifier/>
<sp:MustSupportRefIssuerSerial/>
</wsp:Policy>
</sp:Wss10>
</wsp:Policy>
Similar Messages
-
Maximum number of connection profiles and group policies for Cisco ASA
Hi,
We have a Cisco ASA 5520 running 8.0(2) that we use only for Remote Access VPN.
Does anyone know how many connection profiles and group policies that are supported on the box? I have not been able to find this in the manual.
Thanks in advance for your help!
Best regards,
HarryThere is no limit for connection profiles or group policies that can be configured on ASA. However the numbers do depend upon the memory available in the device as the profiles are stored in memory during execution.
-
OWSM 11g : Authentication Providers for X.509 and SAML policies
Hi All,
I am currently trying to implement the X.509 and SAML policies. As per the documentation for these polices I need to configure an authentication provider(or Identity Assertion provider) that can handle perimeter authentication via the NameCallback. I had configured an authentication provider(default authentication provider) that handled the namecallback and passwordcallback. What I can't figure out is how do these two authentication providers differs. And, incase one has to configure for the X.509 and SAML policies how to do the same.
Any pointers will be useful. Especially, from anyone who has worked and implemented the above policies.
Thanks in advance.
Edited by: Shomit Sahdev on ८ अप्रैल, २०१० १२:२५ पूर्वाह्नAfter research by Oracle Support it actually turns out that this problem was a combination of factors:
1) some clients were effectively using an invalid certificate so it is corrrect they got an error and everything worked fine when they started using the right certificate
2) it does, however, turn out that, in the case of an error the error handling has been obfuscated in WLS 10.3.6 as compared to WLS 10.3.4 which gives a more descriptive error stating the nature of the problem (missing certificate, invalid certificate, unknown user, ...). Apparently this was deemed a security issue and has thus been replaced by a generic "internal server error". It is however possible to re-activate this older behaviour using a couple of JAVA_OPTS that you pass during server startup:
-Dweblogic.wsee.security.debug=true -Dweblogic.wsee.security.verbose=true
The above reintroduced the behaviour we had in WLS 10.3.4 and thus solves our problem! -
Hi, I have had my MacBook Pro stolen and the police have mentioned about using iCloud to see if I can track it's whereabouts - however I have no idea if I had iCloud on my MacBook or how to track it if I did - can anyone help me please? Thanks
Welcome to the Apple Support Communities
To see if you have iCloud, open http://www.icloud.com and log in with your Apple ID. If you can access to iCloud, you have iCloud. If you get an error message or you can't access, you don't have iCloud. This only works if you only have the Mac (not an iPhone, iPod touch or iPad with iCloud).
Apart from that, "Find my Mac" must be turned on in the Mac in order to track it, so if it wasn't turned on, you won't be able to track it. If it was turned on, the computer must be connected to the Internet to be tracked.
If you can access to iCloud through http://www.icloud.com, choose "Find my iPhone" and look at the Devices list. If your MacBook Pro shows up, "Find my Mac" is turned on, so see if you can track it and tell to the police that it's possible to track your MacBook Pro -
End Of Life (EOL) and End Of Support (EOS)
hi!
i´m looking for End Of Life (EOL) and End Of Support (EOS), for the follow products and version:
- Creative Suite 3 to 6
- Acrobat Professional 8 until now
- Photoshop 6
thanks in advance!
best regards,hi steve! thanks a lot !
i've founded this one either... this kind of requirement is common in big companies. so, I was looking for something a bit more specific.
those are my findings:
http://www.adobe.com/support/programs/policies/supported.html#goldplaninfo
https://www.adobe.com/support/products/enterprise/eol/eol_matrix.html#86
http://helpx.adobe.com/x-productkb/policy-pricing/discontinued-products.html
I really want something like this:
Windows lifecycle fact sheet - Windows Help
but with Adobe Products.
best regards -
Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT -
I didn't make a rescue e-mail and now i forgot the answers of my security questions!!' And the apple support contact wont open???
I'm not sure what you mean by the 'apple support contact wont open' (?). If you mean the 'contact iTunes Store support' link on the page that you posted from I've just tried it and it seems to wok ok for me, though I haven't gone as far as to actually contact them.
You can contact either iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps on the page that you posted from to add a rescue email address for potential future use, or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
I think I have had enough. So its been a long time back and forth between me and you. Since I am not getting any solution and same thing you guys are providing me again and again.
I want to take a step back and list down a few things which have happened so far :-
I started chatting with the apple support on this issue starting September - please refer back to your chats on this Serial Number.
I have factory reset my phone like 20 times since then as each time they asked me to follow few steps which made me loose my data as your icloud doesn't work properly as stated by your customer care support people itself that sometimes the back up doesn't happen so please take back up at your laptop too.
Send phone diagnostics by clicking on a link.
reset your WIFI settings
Call apple support after 24 hours of observation.
Next day when same issue occurs then extreme Apology.
Take Back up on computer and Icloud both and contact apple support once its done
Call apple support again.
Factory Reset by erase all contents and setting options. Once one call back again.
wait and analyse for a whole day after setting up apple ID and data.
Wifi Issue stil exists.
Call apple support again
Between all this I had to explain the issue each time to a new representative. This above process I have gone through at least 7-8 times. Please go and refer your call notes.
So finally i got to know after escalating it several times and one of your supervisors told me that the issue is a hardware issue and it can only be replaced as they have tried it all.
Supervisor assured me that he has recommended it to be replaced in notes and asked me to visit a center.
I called in local distributor and set up an appointment, unfortunately couldnt make it. So call them to reschedule as I am working women so i dont have all the time in life to keep interacting with associate after associate so thought of walking in to an apple store near by and lodge a complaint. The supervisor updated me that I have warranty left and it will be replaced without any cost and also if i report and issue in warranty and if apple is not able to resolve it so the warranty stands true until its completely resolved after customer's consent.
I went in to give my phone to the tech support and they kept it for analysis and came back saying the issue doesnt exist. I was getting a disconnection in my WIFI every now and then. My Data plan was always used and i fortunately have a proof of that.
Customer rep told me talk to apple support and if they say we will replace it. One more place added where customer has to go.
Now and back to square one - They say phone is damaged - we cant replace it. First of all the phone is not damaged and you guys are just finding reasons to not replace a faulty phone.
It randomly disconnects and its listed as a known issue on your website too. had this not been listed i would have never thought its the phone. Then I started to observe that its the phone that makes a disconnection and not the WIFI connections as it was everywhere home, office and at friends place.
Best i can do is call you guys when this happens if you guys promise me that the tech employee of apple can come to whatever location i suggest at that point and do not be surprised if the phone behaves normal when the person arrives as its random.
Now you want pictures of my phone and you want to analyse further.After making an appointment and waiting over a week I was a few minutes late for my appointment I was told by apple I would have to make a new appointment. The shop was Chatswood in Sydney and the manager Mathew was very pathetic. I travelled 1 hour each way and was treated very poorly I must comment and say this was my first Apple devices and I will never understand how come people are buying these devices. The apps seem really good if only the hardware and the support could match. I really wish this manager all his best to Matthew in his next position somewhere else he obviously should not be in the position of managing an Apple store.
-
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
MP3 and restricted codec support
hi,
finally I have my system set and running. I did go for the KDE4 which I like very much and followed all the steps as stated in the Beginner'S Guide.
However, I don't have MP3 neither other multimedia propietary format access like MP4, AAC, MOV, WMA, WMV or RMVB - I carry my multimedia collection of songs, videos and movies from when I was on WinXP (yikes!)- despite I installed Xine and other utilities as desccribed in the Beginner's Guide.
I do can watch some AVI files but can't access sound stream so they're muted. How do I add full multimedia support to my fresh shiny Arch? I did try to search the forums but there's to seem a problem because I keep receiving desconnections errors.http://bbs.archlinux.org/viewtopic.php?id=93862
Re: MP3 and restricted codec support
why did you opened a new thread instead of discussion in the previous one?
oops, I did it again, sorry! (yeah, I know you prefer Brtiney saying that )
I just did the same of my very first post: promise to don't screw things again and follow the rules.
@Bralkein: thanks for your tips and useful research, I will stick with xine until I backup my root, then maybe I try gstreamer.
@.:B:.: I have panic of installing things that can break my system, before installing Arch few days ago I came from an entire life in *buntuland, so you'll see : D
Last edited by martin77 (2010-03-27 05:10:09) -
There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?
If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O. -
NEW 9I RMAN: BACKUP OPTIMIZATION AND RETENTION POLICIES
제품 : RMAN
작성날짜 : 2004-05-20
NEW 9I RMAN: BACKUP OPTIMIZATION AND RETENTION POLICIES
=======================================================
오라클 9i RMAN 에서는 백업을 보다 효율적으로 할 수 있는 기능을 보강 했다.
지금 소개할 "Retention Policies" 기능을 통해서 보다 효율적인 RMAN 백업
전략을 세울 수 있다.
1. 백업 화일 최적화 방법 (Backup File Optimization)
백업 화일 최적화란 백업에 소요되는 공간을 최소화 하는 전략이다. RMAN
백업시에 같은 정보 (dbid, checkpoint, and resetlogs data 등등) 를 가지고 있는
화일이 이미 존재하는 백업 셋 내부에 있는지 체크하게 된다. 만일 같은 화일이
이미 백업 되어 있다면 BACK UP 명령은 해당 화일에 대해서는 백업을 하지 않게
된다.
이때 같은 화일이라고 판단하는 기준은 다음과 같다.
* Datafile: 같은 DBID, checkpoint SCN, resetlogs SCN 과 time. 데이타 화일은
반드시정상적으로 offline 되었거나, read-only 이거나, 또는 정상적 으로 close
되어야 함.
* Archived redo log: 같은 thread, sequence number, 그리고 같은 Resetlogs
SCN 과 time.
* Backup Set: 같은 Backup Set recid 와 stamp.
RMAN 이 백업을 수행하다가 위와 같은 조건의 화일이 이미 존재함을 확인하면
이것은 건너뛰게 될 화일의 대상이다. 하지만 이때 바로 Skip 을 결정하지 않고
정해진 Retention Policies 를 조사 한후에 Skip 여부를 결정 하게 된다.
만일 백업 명령에 DELETE INPUT option 이 사용되면 RMAN 은 백업이 Skip
되어도 화일을 지우게 된다.
RMAN 은 모든 화일에 대한 백업이 Skip 되어도 에러메시지나 경고를 보내지
않는다.
그러나 만일 데이터 화일에 대한 백업이 recovery policy window 보다 오래
된 것 이면 RMAN 은 새로운 백업 화일을 만들기 위해서 화일을 백업 하게 된다.
Note:
자체적인 expirations policy 를 가지고 있는 media manager 를 사용할 경우에는
이런 백업 최적화 정책을 사용하는 것에 신중을 기해야 한다.
백업 최적화 를 사용하기 위해서는 CONFIGURE 명령을 사용한다. CONFIGURE
명령은 명령 수행 이후에 이루어지는 모든 백업에 대해 적용이 된다.
예:
CONFIGURE BACKUP OPTIMIZATION ON; # default 는 OFF
2. Backup Optimization에 Retention Policies 적용 하기
Retention Policy 로 백업 최적화를 조절 할 수 있다. 그러나 retention policy를
사용하지 않기 위해서는 'CONFIGURE RETENTION POLICY TO NONE' 을
이용해서 명시적으로 retention policy를 사용하지 않는다고 해야 한다. 디폴트로
REDUNDANCY = 1 이 적용 된다.
a. Recovery Window 를 이용한 Backup Optimization
만일 백업 최적화가 enable 되어 있고 Recovery Window 가 retention policy
적용을 위해서 셋업 되어 있으면 RMAN 은 항상 가장 최근의 백업이 Recovery
Window 보다 오래된 데이터 화일을 백업한다.
예를 들면 다음과 같은 조건에서
o Today is February 21.
o The recovery window is 7 days.
o The most recent backup of tablespace tbs2 to tape is January 3.
o Tablespace tbs2 is read-only.
2월 21일에 tbs2 테이블 스페이스를 테이프로 백업을 하라는 명령을 내리면,
RMAN 은 이 화일이 1월3일 이후에 변경 사항이 없는데도 불구 하고 백업을 하게
된다. 이로써 RMAN 은 최근 7일 동안에 최소한 한번의 백업이 있어야 된다는
조건을 지키게 된다.
이러한 작동 방식은 media manager 가 오래된 테잎을 제거 해도 되도록 한다.
그렇지 않다면, media manager 는 1월 3일의 백업을 무한정 가지고 있게 된다.
2월 21일에 tbs2 테이블 스페이스의 보다 최근의 백업을 만듦으로 써, RMAN 은
media manager 가 1월 3일에 백업 했던 테입을 지워도 되도록 한다.
b. Redundancy 를 이용한 Backup Optimization
Retention policy 로 Redundancy 를 채택 한 경우에 RMAN 은 Redundancy
에 1을 더한 갯수를 초과하는 오프라인 또는 읽기 전용 화일의 백업을 건너뛴다.
이때 'CONFIGURE RETENTION POLICY TO REDUNDANCY n' 명령어로
Redundancy의 갯수를 정한다.
아래와 같은 백업 최적화 명령을 내린 경우를 예로 든다:
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
아카이브 테이블스페이스를 한번도 백업을 받은적이 없고 다음의 작업을 1주일
동안 한다고 하자.
Day Action Result Redundant Backup
Monday Take tablespace archive offline clean.
Tuesday Run BACKUP DATABASE. The archive tablespace is backed up.
Wednesday Run BACKUP DATABASE. The archive tablespace is backed up.
Thursday Run BACKUP DATABASE. The archive tablespace is backed up. Tuesday backup.
Friday Run BACKUP DATABASE. n/a Tuesday backup.
Saturday Run BACKUP DATABASE. n/a Tuesday backup.
Sunday Run DELETE OBSOLETE. The Tuesday backup is deleted.
Monday Run BACKUP DATABASE. The archive tablespace is backed up. Wednesday backup.
화요일, 수요일, 그리고 목요일의 백업은 아카이브 테이블 스페이스를 복사 해서
3개의 백업이 반드시 존재 해야 한다는 조건을 충촉 시킨다. (1+Redundancy)
금요일과 토요일에는 백업 최적화 조건에 의해서 아카이브 테이블 스페이스를
복사하지 않게 된다.
RMAN 은 일요일에는 유효기간이 지난 백업 화일을 지우게 된다. 따라서 화요일에
만든 백업은 삭제 된다. 월요일의 전체 백업은 3개의 백업이 존재 해야 한다는 조건
때문에 아카이브 테이블 스페이스를 또 다시 백업하게 된다. 이런 방식으로 백업
사이클이 진행 된다.
3. RETENTION POLICY NONE vs. DEFAULT
주의 사항:
'CONFIGURE RETENTION POLICY TO NONE' 과 'CONFIGURE RETENTION
POLICY TO DEFAULT' 는 그 의미가 같지 않다. 전자는 RETENTION POLICY
자체가 존재 하지 않는다는 의미 이며 백업은 expire 되지 않으며 'DELETE
OBSOLETE' 명령은 사용 할 수 없게 된다. 후자는 디폴트 RETENTION POLICY
(REDUNDANCY 1) 를 사용하게 된다는 의미 이다.
'DELETE OBSOLETE' 명령은 RETENTION POLICY 기준으로 expire 된 백업을
제거 하라는 명령이다.
보다 자세한 내용은 Oracle9i Recovery Manager User's Guide and
Reference의 Backup Optimization 부분을 참고 하시기 바랍니다.
--------------THE END----------------------------------------------Hi,
Backup optimisation = +- do not copy empty space.
So, when you issue your BACKUP statement, it backs up the datafile. dot. nothing more.
In order to achieve what you're testing, look into TFM for BACKUP INCREMENTAL LEVEL x .
Regards,
Yoann. -
Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem
Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
I've downloaded the Creative Cloud app but the App tab says there is a download error and to contact support. I have tried uninstalling and reinstalling and am gettting the same message. I'm running OS X 10.9.3.
Blakey if you are receiving a download error then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
i'm not able to purchase with itunes from the game clash of clans! I did it the first time, it worked, but now it wont work and says : contact support.
What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
-
ITunes for Windows, QuickTime, and Apple Application Support
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
*The relationship between iTunes for Windows and QuickTime for Windows*
Conceptually, you don't go too far wrong thinking of iTunes for Windows as a gigantic QuickTime for Windows plug-in. QuickTime for Windows provides the audio and video playback capabilities for iTunes for Windows, the codecs iTunes for Windows uses for importing and burning CDs, and so forth.
So, under normal circumstances, if you uninstall your QuickTime for Windows your iTunes for Windows will no longer launch. The exception is if you install a different application such as QuickTime Alternaltive, which also provides QuickTime playback capabilities. However, most such applications (QuickTime Alternative being a good example) are themselves built from actual QuickTime program files. So there's really no getting away from the requirement to have QuickTime for Windows componentry installed on your computer in order to get your iTunes for Windows to launch and run.
In addition to needing some QuickTime for Windows installed on the computer for iTunes for Windows, a given iTunes for Windows version will require *at mininum a particular version* of QuickTime for Windows to be installed on the computer in order for that iTunes for Windows version to run. For example, iTunes for Windows 5.0.0.35 requires at least a release version of QuickTime for Windows 7.0.2 to run correctly, iTunes for Windows 6.0.0.18 requires at least a QuickTime for Windows 7.0.3, and so on. The same applies for solutions involving other programs like QuickTime Alternative. An iTunes for Windows 6.0.0.18 would require an installed version of QuickTime Alternative to made from (at least) QuickTime for Windows 7.0.3 componentry in order for iTunes to run.
The most straightforward way to go about getting your iTunes for Windows launching again after you've uninstalled your QuickTime for Windows is simply to reinstall QuickTime for Windows. You can get the latest version of QuickTime for Windows XP, Windows Vista and Windows 7 from the following download page at the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
*The relationship between iTunes and Apple Application Support*
iTunes for Windows uses a number of the same program files as other Apple software for Windows (most notably, QuickTime for Windows and Safari for Windows). Starting with iTunes for Windows version 9.0.0, QuickTime for Windows version 7.6.4, and Safari for Windows 4.0.4, program files common to more than one of the programs have been stored in a single location: "Apple Application Support".
So, if you uninstall your Apple Application Support (using the Add or Remove programs control panel in Windows XP, or using Programs and Features in Windows Vista or Windows 7), your iTunes for Windows 9.0.0 (or higher version) will no longer launch ... because several essential program files for iTunes for Windows 9.0.0 (or higher version) will have been uninstalled.
At the time of writing this user tip, Apple Application Support is not available as a "standalone" download from Apple. It is only available as part of the installer bundles for the most recent versions of iTunes for Windows, Safari for Windows and QuickTime for Windows. So if you have uninstalled your Apple Application Support and your iTunes for Windows 9.0.0 (or higher version) is no longer launching, the most straightforward way of getting your iTunes for Windows launching again is to uninstall your existing version of iTunes for Windows and reinstall the latest version of iTunes for Windows. (The iTunes reinstall should also reinstall your Apple Application Support.)
[Latest iTunes for Windows version|http://www.apple.com/itunes/download>
If, however, you've uninstalled both your Apple Application Support and your QuickTime for Windows, the most straightforward way of getting them both reinstalled is to download the latest QuickTime for Windows installer from the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
This is the 1st version of this tip. It was submitted on March 7, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Maybe you are looking for
-
Default value in LOV field in Create and Update page in OAF
Hi All, I am unable to default LOV field in Create and Update page in OAF. I tried in below way : OAMessageLovInputBean lovBean1 = (OAMessageLovInputBean)webBean.findChildRecursive("AAA"); But I am getting developer mode exception, so please guide me
-
I am trying put a bunch of pictures into a single file and print a composite or whatever it is called. Like that of a fraternity or JROTC photo.
-
Updating classic Ipod w/o the wall charger
I tried to update my classic 20gb Ipod this afternoon after 4gbs of songs were missing from my Ipod and was asked to plug Ipod into wall after update. Well I don't have the wall adaptor anymore, I left it in Oregon when I moved to HI to keep items to
-
How to send wide-screen slideshow to iDVD?
Hi there, is there a way to create a wide-screen slideshow in iPhoto and send it unaltered to iDVD? Whatever I try, it stubbornly wants to reformat the slideshow with a 4/3 aspect ratio. Any hints would be very much appreciated, and yes, I do have Ph
-
InDesign Tables: Row and Column Strokes
Using InDesign Tables: How do you get row and column strokes in a table to appear perfectly joined? When I choose "Column Strokes in Front" (Under Table Setup) i still see a tiny row stroke, and vice versus.. it's really visible in the PDF almost can