WLSE Not showing the RSSI the AP reported Rogue APs in my scanning-only mod

Hi guys
I have a WLSE version 2.15.1 which is configured to detect Rogue AP, APs are 1242, when I see the Unknown AP detail the RSSI has a value of 0 for all Rogue AP detected any help or suggestions, I will be very useful.
Thank you.
Greetings

If the RSSI value is zero, then the AP is not active at all. Do you see the same value for all the APs. Does the WLSE provide correct RSSI values for the known APs?

Similar Messages

TS4006 My 2 I pads have the same Apple ID and I cloud and I cants find my I pad and when I tried to use the app it would not show the I pad that I lost it would only show me 1 of my I pads

I lost one of my I pads and I want to find it I used the find my i pad app but it did not show me the I pad I lost it only showed me the I pad I had and I really want to find my I pad so I don't know how I find my I pad that's not coming up on the app

Wi-Fi only iPad do not have GPS.
Your iPad have to rely on crowd-sourced Wi-Fi hotspot and cell tower locations to determine your approximate location.

Not showing the column name

Hi
I am using jdev 11.1.1.3
.i i dragged an adf table from data control.it has got 3 columns.i changed the name of first column as Lang grades.when i run that it is showing the column name as lang grades.then in that table two fields r mandatory.so in the property inspector i put the show required as true.but after that on running it is not showing the column name as lang grades.there is only the star sign for showing the attribute as required only.

Hi,
not enough information. So from your description, a column that is not marked required on its cell renderer component is not displayed at runtime. I am not aware of such a problem and suggest to try a later version of 11g R1 (11.1.1.6) to see if this reproduces. This allows you to exclude a probelm with 11.1.1.3 only
Frank

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

SCCM console does not show the link to the report manager!

SCCM console does not show the link to report manager.
Any idea?
thanks!

Hi,
The report manager URL isn't displayed in SCCM console. Why you want to display it in console?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Do not show the # values should be replaced with blank at report

Dear All,
There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
any suggestions please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
Thanks & Regards
sathish

Hi Satish,
There is one tcode where u can keep ur symbol defined say blank to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
but it will effect not only this query but all the queries so it is upto u....
and at cube level u can write a routine to check ...
if this field value is initial .
change it with blank
else
leave it.
hope it helps...
regards
vamsi
Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Rendered html pages in results file(html) not showing the images of origina

hi,
rendered html pages in results file(html) not showing the images of original page
when i click on rendered html pages of different html section of a results file.
both master and tested as well.
thx
pasumarthi

By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
Regards,
Zuriel

Not Showing the Admin tab

Hi All,
I am new to BIP and trying to build report in Publisher by using biserver Subject areas but when i am logging into publisher through web server (Administrator) but it is showing empty shared and my folders and also not showing the Admin tab.
By searching some old threads i found that we have to change the security model in xmlp-server-config i don't know why we have to make this setting but i changed this setting as below but now also it is showing empty folders and not showing Admin tab.
Edit the property SECURITY_MODEL and change it to XDO. i.e. for example <property name=”SECURITY_MODEL” value=”XDO”/>.
Can any one help me how to build report using biserver SA's.
Regards,

Hi ,
Sorry i did't restart the services now all its looking fine.
Thanks,

Not showing the available contexts?

Hi,
When I am running a report in WebI, its running fine. Wehn I open the report in Edit mode, in the query's its shown the context name in the query properties. When I try to edi the query, and even though, I restore the same objects in the query panel, its asking for context. But its not showing the actual context. Its showing other contexts.
Could anyone faced this kind of problem?
Any help pelase.
Thank you,
Regards,
Gowtham Sen.

Hi Gawtham,
I would suggest you look at the universe and check that the objects are being defined correctly i.e by checking the class and source table.field and double check that the contexts have been defined correctly.
Regards
Jacques

UCCE CTIOS supervisor not showing the team member

Hello,all. We have ICM 8.0(2) duplex environment. The CTIOS supervisor toolkit is not showing the most updated team member information. It's still showing the old team member who was removed already and not showing the newly added ones. Do we need to restart the CTIOS server when we change the team assignments? The webview report is showing the correct information though.
Thanks.

Hello,
I have seen this happen before. lookup how to execure an OPC exit (this will cause a temp outage in your contact center).... This will resync the team's..
It should just work normally however
Chad

Msi Live Update....not Show The Last Driver

Hi
whe MSI Live Monitor (MSI Live Update 3), search.. not show, the last driver...and bios....
I have a G4MX460-VTP
and the driver in the MSI Live Update is:
Online Ver. 4403 (MSI Version)
but when visit the MSI webpage (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=154) the last driver is:
Nvidia driver 45.32 for Win2000/WinXP/Server2003 OS
and in the Nvidia webpage is 50.16.....
and the same happend with the VGA Bios...
y fix my vga cad update the VGA bios....but...this update don't show in the Live Update 3
How fix it???
thanks

Do not update the VGA BIOS unless you have a good reason to. It is not like a motherboard.
Go to nVidia Drivers if you want the latest drivers.
Live Update may not have been updated OR the version reported by the Live Update utility has been tested successfully with that card. Newer drivers sometimes cause problems with older cards. The only way to know for sure is got to the nVidia site and try the latest.

Not showing the Data in VC application

Hi I have developed the application in VC.
It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
Next day after i run the application , it is not showing the data. displaying the message .
"No Data Found".
But when i run the BAPI at the back end R/3 it is giving the data properly.
Can u tell me what might be the problem
REgards
Vijay

Hi Krishna,
check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
Check it with external debugging of the BAPI, when you can reconstruct the error.
Best Regards,
Marcel

WLSE Not showing the RSSI the AP reported Rogue APs in my scanning-only mod

Similar Messages

Maybe you are looking for