WM and HUM

Hi all
Iam getting this error while creating the inbound delivery.Sloc is wm and hum managed.
Items that are not relevant for goods movements cannot be packed
Regards
chandra

Hi
This is resolved(changed the confirmation to inbound delivery) and when iam posting GR with inbound delivery ,getting the below message.
No item category exists (Table T184L HID V )

Similar Messages

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Libby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

10.4.10 vers 1.1 | Loud noise and Hum on speakers thru' USB Audio Interface

After doing this update all of a sudden my Mbox2 produces loud noise and Hum on my attached speaker when hooking up the power adapter to my MbookPro or adding a second display... I can virtually hear when the computer is computing thru' the speakers... This noise thing adds up the more equipment I hook up...
Does anyone know what this could be....???

This can happen if the software is "allowing"
more power to be accessed by the USB ports..
This isn't quite accurate. USB devices can ask for power, up to 2.5 watts (500 ma @ 5 volts), from a USB port. Software can query the device for its power requirements & shut down the power to it (& warn you it is doing so) if it exceeds that limit. However, the hardware in Macs themselves (& essentially all other computers) also have a number of power limiting circuits, independent of the OS software, that make it just about impossible for the software to "allow" more power than this to be drawn from the port. (If they didn't, they would not meet most of the world's safety codes.)
Moreover, if your USB speakers (or any other USB device) requires more than 2.5 watts, it would never have been bus powered under any version of the OS, assuming it meets USB standards (IOW, displays an official USB logo & is not itself defective).
If the technician is telling you something different, it might be a good idea to find a more qualified one, or at least get a second opinion.

Empty DVD drive spins and hums while battery is charging

This is odd and specific: When the battery runs down on my Powerbook and goes to sleep, I plug in the charger and the DVD drive starts spinning. It gives a continuous hum, despite being empty, which stops when I sleep the computer. When I reawaken it, it hums again. It takes three or four times of waking and sleeping before the DVD drive finally stops spinning. Pressing the Eject button does nothing and the drive has no media in it. It only does it while the battery is charging; once it's charged, unplugging and replugging does nothing. Any idea what's up? How to get it to stop? Thanks!

Arvin: Are you quite certain there's no disc in the drive? Nearly all of the vibration that you feel and the sound that you hear when an optical drive is operating normally is caused by the disc itself being minutely (or sometimes not so minutely) unbalanced. There should be far less noise and vibration without any disc in the drive, because only the drive motor is spinning. Of course without a disc in the drive, the motor shouldn't be spinning at all — as you know.
Start your Powerbook up from a cold shutdown while holding the mouse button down. Keep holding it; if there's a disc in the drive, it should be ejected before the computer starts up. If that yields no results, try (very gently) inserting a disc into the drive. If it inserts normally, you were right: the drive is empty. It shouldn't be spinning, and I don't know why it is.
If the disc runs into something and won't go in, don't push it: there's already a disc in the drive, and now the problem becomes how to get it out. I'm betting there is indeed a disc in there that you've forgotten about, and that isn't being ejected. Failure to eject a disc using any of the standard methods suggests a mechanical failure of the drive, which will need to be replaced if it can't be persuaded to behave.
The disc, if there's one in there, can be manually recovered in the course of replacing the drive — a fairly simple do-it-yourself job for anyone who isn't all thumbs and can follow directions.

Link between PM and HUM

Dear all,
In order to implement physical tracability on PM service orders, I need to link HU with PM.
It seems that it is a standard function in PM like PP-HUM integration.
Can you give me help some help on this topic ?
Thanks in advance.
Best regards
Dominique Schmitz
[email protected]

Hi!
Thanks for response but which field shows the link between PM and planned order?
I couldn't find it.
Best regards,
Bartek

SUM and HUM which no had the priority

Hi all ,
i am using the HUM functionality for the reciepts , is this functionlaity is does the syste generates SUM during TO , if so which the priority and how this is managed , can some one help me on this .
thanks ,
ksr

Hi,
not sure what you mean, but maybe this information can help you further:
it is possible to use handling unit management together with warehouse management. You activate handling unit management independent from storage unit management. Only in case if storage location is full-WM- AND HU-managed, the storage unit management is always active and HU numbers are taken over as SU numbers. In all other cases HUM and SUM are independent from each other and number ranges must be set a way that they are not overlapping.
Regards,
Ely

E1000 Constant Resets Needed and Humming Power Adapter

Nearly every day, or recently more often, I need to restart my E1000 router. I have a cable ISP, a wired connection to my desktop, a smartphone, Xbox 360 and laptop on wireless (although usually not at the same time).
What happens is that after some time, it will still show me connected to the router, but it will lose the connection to the Internet. Unplugging the router and plugging it back in will restore the connection. This has to be done at least daily, many times more often.
Possibly related to this issue is a humming power adapter. It is a very low hum that of course goes away every time I unplug it or turn off the surge supressor. It is possible that these two issues are related, as it may be sending too much/too little/fluctuating power to the router causing it o crash or lose the connection.
This may have been happening since I got the router, but I simply had not noticed it since up until recently I had always been plugged in to my UPS which I had turned off each day. Had I noticed this, I would have returned it to the store.

I think you can try to reset the router and reconfigure the router. If you still face the same problem then it might be the issue with the power adapter then.

No sound/popping and humming from all sound plugs K9a2

My K9a2 Plat board was doing great, today I have no sound from the plugs and the sound I get is humming and popping. I tried to reinstall the drivers and nothing works. If I use my Headset from USB the sound is fine.
Any thoughts? Bad chip?
I looked at the MOBO, it is clean as a whistle and the wires are tight.

Quote from: cdldt on 14-August-09, 00:13:47
Are you running Vista? If so, be sure to install the Realtek drivers, because the in-box generic HD Audio driver had issues with my system including loss of sound (especially after sleep) and noise.
Downloaded from MSI
All was fine then on day all I get is humming. If i plug in me usb headset and MIC sound is fine. It has to be a board issue.
I am running Win7 Ultimate; 8gb Ram; K9a2; ATI 4870 X2; AMD 940

Vendor Return for WM and HUM Scenario.

Hi.
We have a requirement where we need to return the stock back to the vendor.The stocks are HU managed and also the TR and TO has been created.Above all we have mapped the return cycle from SD route.Ie we have created the vendor as customer and assigned to the vendor along with Notification.
Please help me TCode wise the flow of cycles.
Yogesh Walde

Hi
This is resolved(changed the confirmation to inbound delivery) and when iam posting GR with inbound delivery ,getting the below message.
No item category exists (Table T184L HID V )

Error while issuing subcon material (WM and HUM managed)

Hi All,
We have activated Warehouse Mgmt and Handling Unit Mgmt for one storage location.
For Subcontracting process, while issuing material from this storage location to subcontractor through mvt. type 541, we are getting Error message VL 295 " Dlv. type (dlv. catgry LB for mat. TEST_BIN_02 and BWART 541) cannot be determined" can anyone help what the problem could be?
We have tried this transaction for Raw Material (ROH) issued to subcontractor and it is working fine, but while issuing Finished goods (FERT) it is giving this error.
Regards,
Ravi Davda

Hi,
Check in SPRO > Logistics general > Handling unit management > Basics > Delivery > Delivery type determination.
Regards,
Prabu

Simple iPhone music creation app's name? You can snap fingers and hum to create on 4 part band

This is a really simple app with - like the image of a bass guitar against an orange field. You might sing "dum, dum-dum" rhythmically into the iPhone, and that's transformed into the bass line. I've been told this is similar to Garageband, but seems simpler.
Does anyone know the name of this app (& how to get it, if it's not easilly found in the app store)?
THANKS!

Dear Brian:
Create a Play List in iTunes.
Control-Click and open "Export" in the highlighted Playlist in iTunes.
With "Export" opened:
1. Click on "Format" and choose "M3U";
2. In "Save As" name your "WhatEverNamePlaylist.m3u"; and
3. In "Where" tell the program where to send your "WhatEverNamePlaylist.m3u".
You are done creating the Playlist.m3u in iTunes.
Open "Subsonic Web Page".
Left hand column open "Import playlist".
In "Import playlist" click "Choose File" and open the "WhatEverNamePlaylist.m3u"; you created in iTunes.
The "WhatEverNamePlaylist.m3u" should now occupy the space between "Choose File" and "OK".
Click "OK".
The file should now be in the "Playlist" on the left.

Hitachi drives hum in MacPro?

I just got a refurbed MacPro with the stock 250GB hard drive and so I ordered 2x500GB Hitachi Deskstar 7K500 drives from zipzoomfly.com (1.25TB total) The drives arrived today and so I went and installed them (very easy in the MacPro)
Upon boot up, I noticed a really nasty "clicking" noise and thought "oh no", the machine never fully booted, I even got the circle w/ a line through it. So I shut it down and removed one of the drive trays and figured out which one of the drives was clicking.
So, with the other drive still in place, I booted again and this time it came up and wanted me to initialize it so all is well... but the thing is that it seems to "hum" quite a bit. Overall, it's much louder than with just the 250GB boot drive installed, I was wondering is this "hum" normal on a MacPro? I can kind of understand it because the case is aluminum, but I'm surprised at how it cycles the hum. It's like it'll hum, then it'll be quiet, then it'll hum again and so on.
I have another Hitachi 7k500 in my PC and it doesn't make any noise...
What do you think?
G5 Dual 1.8GHz 1GB RAM Mac OS X (10.3.9)
MacPro Quad-core 2.66GHz, 2GB RAM Mac OS X (10.4.9)

A couple other people have taken similar measures. I bought a 10K Raptor last Sept that makes the case hum and vibrate. Bought a new one, doesn't do it.
I have two WD Caviar SE16s that are so quiet you don't know they are there. But a Maxtor MaxLine Pro sounds like some old big SCSI drive from centuries past churning away. But no case issue.
Sometimes making sure to tighten those bolts and firmly insert the drive is all that is needed. For months I had mine on its side rather than upright and the noise and hum was abated.
I like to take some tools to loosen up and break a drive in at first. Just zero the drive to insure all is well and scan all the blocks. Or use Speedtools to test media and performance.

Splitting and migrating LMS

Due to growth of the network, I need to split a single LMS 3.2 server into two seperate machines (master-slave).
I've prepared two new (virtualized) window servers. installed a clean LMS 3.2 server1 (RME, CM) server 2 (DFM, IPM and HUM)
I've restored the previous backup on the new server1 (it says that application doesn't match but I continued restore CS, RME, CM)
I've restored the previous backup on the new server2 (same message, but I continued restore DFM, IPM and HUM)
Everything seems to work fine, except:
(my next step is to setup the master-slave, currently two standalone-servers)
server1:
compliancy management -> when I try to open a template, the following error occurs:
Problem with File /WEB-INF/screens/config/dcma/BaseLine/BaseLineViewer.jsp!!!nul
server2:
It won't let me to run the changehostname.pl perl script, old-hostname doesn't match the old-hostname
These are the only issues that I've seen for now... my question. Is this a supported procedure, if not, what's the best practice for splitting a server into multiple server i.e. a master/slave(s) setup.
thanks in advance for any help.

Problem with File /WEB-INF/screens/config/dcma/BaseLine/BaseLineViewer.jsp!!!nul
In the meantime I discovered that for the baseline templates that I have restored, the "Device Type" is missing.
When I add a new one, it works fine. So I can reproduce this error.
Question, how can I restore the "Device Types" in the baseline templates, for some reason this information is lost and causes this error
(I can't edit them via the GUI, so the solution should be editing some file(s) on the file system)

Microphone doesn't work when unplugged and plugged in

I was trying to record something the other day and was wondering why I had to have the gain on the microphone turned up so high. After a while I figured out that audacity was recording with my internal microphone (dell laptop). I tried using the external one and finally got it to work if I had it plugged in when I rebooted. The second I would unplug it and plug it back in though my computer would start recording off my internal microphone. So, I can use the external as long as I don't unplug it after I have booted. What???
`amixer scontrols` gives this:
Simple mixer control 'Headphone',0
Simple mixer control 'Speaker',0
Simple mixer control 'PCM',0
Simple mixer control 'Mic Jack Mode',0
Simple mixer control 'IEC958',0
Simple mixer control 'IEC958 Default PCM',0
Simple mixer control 'IEC958 Playback Source',0
Simple mixer control 'Capture',0
Simple mixer control 'Digital',0
Simple mixer control 'Mux',0
Simple mixer control 'PC Beep',0
There is only one capture listed, and I'm thinking there needs to be two. When I was using Ubuntu I know there was two, but I didn't really pay attention on Arch. Also, here is the output from `arecord --list-devices`:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I also updated alsa some time ago, which I'm not sure if it has anything to do with, but from a recording I did on December 5 which doesn't sound like it has all the hum I get now I assume it had something to do with the upgrade.
[2009-12-31 12:23] upgraded alsa-lib (1.0.21.a-1 -> 1.0.22-1)
[2009-12-31 12:23] upgraded alsa-plugins (1.0.21-1 -> 1.0.22-1)
[2009-12-31 12:23] upgraded alsa-utils (1.0.21-1 -> 1.0.22-1)
[2010-01-03 11:51] upgraded alsa-utils (1.0.22-1 -> 1.0.22-2)
[2010-01-05 18:27] upgraded lib32-alsa-lib (1.0.21.a-1 -> 1.0.22-1)
Does anybody know why this is happening?

I had similar problems after a recent upgrade. I hadn't tried rebooting with the mic plugged in, but all I get now is static and hum when I go to record. I'm working on my desktop and both the front and back plugs give the same results. I couldn't find anything in the alsa package changes that would have done it and am not that familiar with alsa to begin with. Any alsa experts? I also lost a device on upgrade. :-/

Differences between Premiere Elements 11 and Pro CS6?

Hello,
I would like to know the differences between Adobe Premiere Elements 11 and Adobe Premiere Pro CS6 in relation to video editing. If someone can point me to any resource on the web like a comparision chart of features, differences etc that would be perfect. I understand the Premiere Pro CS6 would have a lot of extra bell and whistles, special effects etc... but what I would like to know if there is a difference in terms of the the quality of the Final Product?
Our needs for a video editor are very simple. We need to create simple titles and text overlay to show the name of the speaker and/or topic. A few times we the audio was not recorded on the video camcera but we do have the audio recorded for the event on a separate audio recorder in .WAV format. So we would like to sync up the video with this audio. Can this be done in Adobe Premiere Elements 11?
And in cases where the audio was recorded with video, we would like to increase the gain/volume for the audio or clean up some hum or background noise. Can this be done in Adobe Premiere Elements 11?
That is it, we do not need any special effects or animations etc... Please let me know if Adobe Premiere Elements 11 can help us meet our needs. If there is any other software that would be more suitable please advise.
Thank you!
VS

I cannot speak for CS6. Here are thoughts from a new APE11 user's view:
adobe30022 wrote:
Our needs for a video editor are very simple. We need to create simple titles and text overlay to show the name of the speaker and/or topic.
APE11 provides simplicity and good functionality for this stated need.
we would like to sync up the video with this audio. Can this be done in Adobe Premiere Elements 11?
If your video and audio contain a clap, you can manually sync by sliding the audio peak along the video. The audio wave form will be blanked out when sliding, with a frame counter showing how many whole frames you have moved the audio at each moment, so it is a "drag, stop, compare, drag another frame or two, stop, compare" process that works. (Finer adjustment than whole frames is not possible.) Once the sync is achieved, select both audio and video track and link them. (The stability of the sync over time will depend on the accuracy of the recorder, and can pose a problem in long recordings. )
increase the gain/volume for the audio or clean up some hum or background noise. Can this be done in Adobe Premiere Elements 11?
APE11 allows adjusting the volume levels and also provides level normalization if desired, but more involved audio cleanup such as hiss and hum removal, compression, or auto gain are not available.
Please let me know if Adobe Premiere Elements 11 can help us meet our needs. If there is any other software that would be more suitable please advise.
You should download the APE11 trial to judge for yourself how well it will meet all your needs.

WM and HUM

Similar Messages

Maybe you are looking for