WM TO with differences using KANBAN

Hi experts,
I am executing stock transfer from WM managed storage location using Kanban. When the bin is empty, TR is created and TO created automatically , the kanban bin status set to "In-Process" (My status sequence has 3 mandatory statuses - EMPTY, In-Process and FULL). I need to confirm the TO with differences. As I cannot post WM TO with differences from Kanban Board, i went to LT12, foreground option and confrimed the TO with differences.
When I checked Kanban board for bin status, it's still in "In-Process" state and when I try to FULL the bin the system is throwing the error saying "TO items have already been with drawn".
Is it the standard behaviour or is there some thing we missed it somewhere?
Request you to help.
Thanks

I also tried this with OM13 control type 2 - Direct stock transfer, and I had the same results.

Similar Messages

Kanban with WM interface: WM TO with differences

Hi experts,
I am executing stock transfer from WM managed storage location using Kanban. When the bin is empty, TR is created and TO created automatically , the kanban bin status set to "In-Process" (My status sequence has 3 mandatory statuses - EMPTY, In-Process and FULL). I need to confirm the TO with differences. As I cannot post WM TO with differences from Kanban Board, i went to LT12, foreground option and confrimed the TO with differences.
When I checked Kanban board for bin status, it's still in "In-Process" state and when I try to FULL the bin the system is throwing the error saying "TO items have already been with drawn".
Is it the standard behaviour or is there some thing we missed it somewhere?
Request you to help.
Thanks

Hi,
In WM/PP interface you can't set automatic creation of TOs at the relase of PrdOrd. You can anly create TR when you release the PrdOrd.
As mentioned by Sarita Doddi you have to process the TR to get the TO.
You can do this manually from LB10 or you have to run report RLAUTA10 in SE38 (or schadule it as a background job). For details please check:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/91cfd2571211d4b3210050045571f7/frameset.htm
Regards,
Csaba
Correction:
You can achieve immediate TO creation but not htrough WM/PP interface. See OSS note 566090.
Edited by: Csaba Szommer on Jul 30, 2009 9:49 AM

Difference Ref cursor with/with out using clause

Hi everyone,
When I am using dynamic sql with USING clause ,the results are not sorted in Ascending order.
DECLARE
TYPE emp_refcursor IS REF CURSOR;
emp_rc emp_refcursor;
TYPE v_emp_id IS TABLE OF number INDEX BY PLS_INTEGER;
TYPE v_last_name IS TABLE OF varchar2(50) INDEX BY binary_integer;
V_empno v_emp_id;
v_ename v_last_name;
p_deptno number := &U_DEPTNO;
v_limit number := 10;
v_ordcolumn varchar2(20) := 'employee_id';
v_stmt varchar2(1000);
BEGIN
v_stmt :=
'select employee_id,last_name from employees
where department_id = :x order by :y ';
dbms_output.put_line(v_stmt);
OPEN emp_rc FOR v_stmt USING p_deptno,v_ordcolumn;
LOOP
FETCH emp_rc BULK COLLECT INTO v_empno,v_ename LIMIT v_limit;
EXIT WHEN v_empno.count = 0;
FOR I IN v_empno.first .. v_empno.last
LOOP
dbms_output.put_line(v_empno(i)||' '||v_ename(i));
END LOOP;
END LOOP;
END;
When I use dynamic sql with out USING cluase,results are sorted in Ascending order.
DECLARE
TYPE emp_refcursor IS REF CURSOR;
emp_rc emp_refcursor;
TYPE v_emp_id IS TABLE OF number INDEX BY PLS_INTEGER;
TYPE v_last_name IS TABLE OF varchar2(50) INDEX BY binary_integer;
V_empno v_emp_id;
v_ename v_last_name;
p_deptno number := &U_DEPTNO;
v_limit number := 10;
v_ordcolumn varchar2(20) := 'employee_id';
v_stmt varchar2(1000);
BEGIN
v_stmt :=
'select employee_id,last_name from employees
where department_id = '||p_deptno ||
' order by '||v_ordcolumn;
dbms_output.put_line(v_stmt);
OPEN emp_rc FOR v_stmt;
LOOP
FETCH emp_rc BULK COLLECT INTO v_empno,v_ename LIMIT v_limit;
EXIT WHEN v_empno.count = 0;
FOR I IN v_empno.first .. v_empno.last
LOOP
dbms_output.put_line(v_empno(i)||' '||v_ename(i));
END LOOP;
END LOOP;
END;
P.S :---- department_id (used) = 50;
Please can some one explain why this is happening like this.
Thanks
Raghu
--------------------------------------------------------------------------------

Hi sundar,
I am new to oracle and learning/trying to get the same output by using differnt methods,rather than using FOR LOOP ,I tried to use ref cursor with dynamic sql.I am in a belief that ref cursor's with dynamic sql are faster than FOR LOOP,irrespective of the size of data.Can you correct me if I am wrong.
Coming back to ur reply,how should my statement look like,when using ref cursor
with USING claus to sort data by asc/desc order.
Thanks in advance
Raghu

To save time, could I get away with just using ProRes Proxy?

Might be a dumb question. But please play along with me...
I've been battling with FCP-X since it first came out. Beach balls, crashes, failed auto saves, you name it. Sluggishness is my middle name. But I think it might be because I'm trying to force too much quality through my older, less powerful machines and my little firewire 400 hard drive. All three of my Mac are 3-4 years old, all are from the old "Core 2 Duo" era (not quad core processors), and are all maxed out at 4GB of RAM. While I've read that many people are having performance problems with FCP-X even on brand spankin' new suped-up Mac Pros with lots more horsepower than I'm running, I've long thought that my machines and their lack of power by today's standards may be at the heart of my sluggishness problem, especially given that most of the material I work with is shot in 1080 HD. (I've never actually tested it in FCP-X, but I'm assuming that things would speed along more like I've been used to in the past if I would just do everything in Standard Definition 480, but that ain't gonna happen.)
Like many, I shoot most everything in 1080 HD (usually 24p, sometimes 30), unless I'm occasionally shooting 720 HD at 60i for later slowing down to slo-mo.
Here's my question: Most everything I edit is for web delivery, and 99 percent of it is for my own use (not clients). Mostly podcast-like stuff, although occasionally I'll create something for my business website. Most of what I do is talking head type stuff, not a lot of motion (except for the 720/60i slo-mo stuff, which usually has some motion, which is why I shoot it at 60i for slowing down). Most of what I shoot is green screen talking heads, intended to be keyed in front of some innocuous background like some of the generators in FCP-X. I want it to look good. Even great. But given the limitations of power on my machines, I also don't want to invest an eternity in rendering and processing time. The work I'm doing with video just isn't that important. It's mostly for grins.
Until last night, I had been working exclusively in ProRes422 (aka "Optimized"). But last night I shot some footage and imported it into FCP-X, encoding it ONLY in ProRes Proxy. And frankly, I couldn't discern any difference. It looked every bit as good as the 422 stuff I'd shot before. There was absolutely no difference to my naked eye. That said, the footage I shot last night to test this out was not shot in front of the green screen (I'll test that out today or tonight), so maybe the Proxy footage won't key as well. (I've been stunned at how good the keyer is in FCP-X, but up to this point I've only been keying ProRes422 footage, not Proxy.) But really, based on just eyeballing the footage, I couldn't tell the difference between the Proxy footage and all the other footage I'd shot previously that had been imported and converted to "Optimized" ProRes422.
I'm not looking to deliver anything for broadcast television (if I were, I'd for sure use 422). I'm not doing any feature film type stuff. My video work consists mainly of stuff just for me, for my own personal amusement (and for the amusement of anyone who might watch it on the web). It's intended for YouTube, Vimeo, or occasionally (in smaller dimensions than 1920x1080) for deployment on my company website. Mostly, it's just me doing podcast-type stuff. Occasionally I'll shoot and edit something for church, or for friends. I like to think the production values of my stuff tend to be higher than, say, the footage Aunt Delores shot at Uncle Ralph's birthday party (okay, A LOT higher than that!). But my stuff isn't going to air on "Good Morning Flatbush" either (unless, on the off chance it should happen to go viral).
So let me make my question as clear as possible: Could I not get away with just using ProRes Proxy throughout my entire work flow, end to end, never switching over to ProRes 422 even when exporting? Honestly, it has taken hours just to render the keyed green screen footage on a 15 minute video, and just the other night, it took the better part of 4 hours (after it was already rendered) to export a 15 minute ProRes422 sequence to YouTube (and then the darn thing timed out, essentially wasting all my time). I'd rather just stay in Proxy the whole way through if doing so would streamline my workflow without compromising too much quality in the "look" of the video. Based on my very limited use of Proxy (just testing it out last night for the first time), I couldn't tell the difference. Maybe for web deployment, Proxy is all I really need.
Have any of you just stayed in Proxy the whole way through, never switching to 422 even when exporting? Might this be an acceptable work flow for some of us, especially those of us on older, less powerful machines? Is this a viable solution? Do any of you work this way? What's your level of satisfaction?
Thoughts?

A lot of what I'm shooting is being shot on a Canon XA-10. Some (and certainly all of the 720 footage, but some of the 1080) is shot on a 7D. And still more is shot on either an iPhone 4S, or even on a Flip Ultra (720p, 30fps).
Most is shot on the XA-10.
What I'm trying to avoid is the excessive render times (doesn't the ProRes 422 footage have to render as well?), and the ridiculously long times it takes to export. Would all that not be reduced significantly by sticking to Proxy the whole way? And what would the trade-off be? I mean, I honestly can't see any discernible difference. Maybe I will when I try to pull a decent key. (Haven't gotten that far yet in my Proxy experimentation.)
Of course, editing in Proxy and outputting using 422 requires that FCP-X encode to BOTH when importing, right? Doesn't that add yet another bit of time to the overall process?
I'm trying to streamline, and to reduce the overall amount of time I'm spending doing this stuff.

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

Time Zone Conversion with out using function and with out alter

Hi All,
I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
Thank you Very Much.

Hi,
you need to set time zone in your session, let's do an example :
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS';
CREATE TABLE USERA.T
SDATE       DATE                              DEFAULT sysdate,
WITHOUT_TZ TIMESTAMP(6)                      DEFAULT sysdate,
WITH_TZ     TIMESTAMP(6) WITH TIME ZONE       DEFAULT sysdate,
WITH_LZ     TIMESTAMP(6) WITH LOCAL TIME ZONE DEFAULT sysdate
insert into USERA.T(sdate) values(sysdate);
commit;
select * from USERA.T;
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-11.04.23.000000
SQL> alter session set TIME_ZONE ='-7:0';
Session altered.
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-04.04.23.000000

Number of Days with difference in 2 columns

Dear all,
Is this possible to display Number of Days with difference in 2 columns.
Regards,

Or use simply the ABS() function
select abs( date1 - date2 ) from dual ;Francois

What is the difference (& use) between CBP & MRP & FBP

Dear Experts,
Can anyone please tell me what is the difference ( & uses ) between Consumption Based Planning & Material Requirement Planning & Forecast Based Planning?
how are these linked to each other?
Instead of sending Big Documents,Please tell me in few lines in a Lay mans Language.
I read these topics in Martin Murray Book (its the Bible of MM acc. to me) but still did not understand it.
Can anyone please explain me.....
Kind Regards
Sajid

Dear Sajid,
Read This link Must help u to get all details u required
http://help.sap.com/saphelp_45b/helpdata/en/7d/c2821c454011d182b40000e829fbfe/frameset.htm
All are Used In Material Requirement Planning(MRP)
Consumtion base Planning :-   Consumption-based planning procedures are straight forward materials planning procedures with which you can achieve set targets with relatively little effort. Therefore, these planning procedures are used in areas without in-house production and/or in production plants for planning both B- and C-parts and operating supplies.
The type of order proposal which is automatically generated during materials planning depends on the procurement type of the material. For materials that are produced internally, a planned order is always created. For materials procured externally, the MRP controller has the choice between creating a planned order or a purchase requisition. If he decides to create a planned order, he must then convert it into a purchase requisition and make it available for the purchasing department.
in MRP there are three Type
1) Reorder Point Planning
     A) VB - Manual Reorder
     B) VM - Automatic
     C) VV - Forecast
2) Forecast Based Planning :- Material planning is based on forecasted requirements. This is preferred when the future requirements might not be the same as the past consumption, but to forecast, the past values are considered.
Like reorder point planning, forecast-based planning operates using historical values and forecast values as future requirements are determined via the integrated forecasting program. However, in contrast to reorder point planning, these values then form the basis of the planning run in forecast-based planning.
The forecast, which calculates future requirements using historical data, is carried out at regular intervals. This offers the advantage that requirements, which are automatically determined, are continually adapted to suit current consumption needs. If, during the current period, material has already been withdrawn from stock, then the forecast requirement is reduced by the quantity of material that was withdrawn. This means that the quantity of the forecast requirement that has already been used is not included in the planning run again.
3) Time Phase Planning :- If a vendor always delivers a material on a particular day of the week, it makes sense to plan this material according to the same cycle in which it is delivered, but displaced by the delivery time. This is possible with the time-phased planning procedure.
If a particular material is to be planned using this procedure, you must set the MRP type for time-phased planning and you must enter the planning cycle in the material master record. You enter the planning cycle in the form of a planning calendar in the Planning cycle field. You must also define a planned delivery time and the Lot-for-lot order quantity as the lot-size key.
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 20, 2009 11:58 AM
Edited by: Pardeep Malik on Mar 20, 2009 12:10 PM

21.01.2008 18:57:48 - 03.04.2008 13:16:47 difference use function module

21.01.2008 18:57:48 - 03.04.2008 13:16:47 difference use function module

Hi Kumar,
Try the FM CCU_TIMESTAMP_DIFFERENCE.
Here u need to pass the data in time stamp.
i.e YYYYMMDDHHMMSS format
Take 2 variable as same type as of FM
CCUPEAKA-TIMESTAMP
In ur example u have to pass 20080403185748 in TIMESTAMP1 and 20080121131647 in TIMESTAMP2
U will get the difference in seconds in parameter DIFFERENCE as 6,327,661. U can convert this as per ur requirement by deviding with 60.
EG: diff in min = 6,327,661/60
diff in hr = 6,327,661/3600
diff in days = 6,327,661/86400
Thanks,
Vinod.

Wield char with the use of matnr

Hi All,
my requirement is like:
I need 1 selection option which seems like parameter type mara-matnr.
when I put any material with the using of "*", it sud be fetch all the material with combination.
I did the code for that but somtime it fails..
TABLES: rqm00.
TYPES : BEGIN OF tp_matnr,
          matnr       TYPE mara-matnr,
        END OF tp_matnr.
DATA: w_text TYPE string.
CONSTANTS: c_wild   TYPE c VALUE '*',
            c_per    TYPE c VALUE '%'.
DATA: t_matnr TYPE STANDARD TABLE OF tp_matnr,
      wa_matnr type tp_matnr.
SELECT-OPTIONS : s_matnr FOR   mara-matnr NO INTERVALS NO-EXTENSION.
IF s_matnr-LOW CA c_wild.
      W_TEXT = S_MATNR-LOW.
      REPLACE ALL OCCURRENCES OF c_wild IN s_matnr-LOW WITH c_per.
ENDIF.
SELECT matnr
         FROM mara
      INTO TABLE t_matnr
      WHERE matnr LIKE S_MATNR-LOW.
IF SY-SUBRC = 0.
loop at t_matnr into wa_matnr.
write: wa_matnr-matnr.
endloop.
ENDIF.
What should I do? what is the right solution which should not be fail in any condition.
Thanks & Regards,
Jaten Sangal
Edited by: Jaten.sangal on Nov 18, 2009 11:26 AM

Hi
I just Executed this Code and working Fine
TABLES: rqm00.
TYPES : BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
DATA: w_text TYPE string.
CONSTANTS: c_wild TYPE c VALUE '*',
c_per TYPE c VALUE '%'.
DATA: t_matnr TYPE STANDARD TABLE OF tp_matnr,
wa_matnr type tp_matnr.
parameters : s_matnr type mara-matnr. " Replace this Parameters and proceed further
*IF s_matnr-LOW CA c_wild.
*W_TEXT = S_MATNR-LOW.
REPLACE ALL OCCURRENCES OF c_wild IN s_matnr WITH c_per.
*ENDIF.
SELECT matnr
FROM mara
INTO TABLE t_matnr
WHERE matnr LIKE S_MATNR.
IF SY-SUBRC = 0.
loop at t_matnr into wa_matnr.
write:/ wa_matnr-matnr.
endloop.
ENDIF.
Did you try this one
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Nov 18, 2009 11:41 AM

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

Adding data file with out using brtools /sapdba

Hi all,
How to add data file to table spaces with out using brtools /sapdba.Please let meknow.
Satya.

why would you do that? whats your requirement?
You can use sql commands (I prefer doing it via brtools),
example
alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
regards
Juan

Iphone 4 battery runs completely down with no use in an hour or two.

My Iphone 4 battery, out of the blue, started running completely down in a couple hours with no use. I would take it off the charger reading 100% and not do a thing, but the unit will get pretty warm and the battery drains. The phone is only 3 months old and two days ago I was getting a full day to a day and a half with my ususal usage. Anyone know what is causing this or a fix? I've tried shutting down and rebooting and for software updates? Any advice is appreciated.
Thanks, Josh

One thing to try is cleaning iPhone Dock Port with a clean dry toothbrush.
If still problem and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.
Another is to clean the dock port again with the toothbrush and a bit of Isopropyll Alcohol, especially clean the pins which are on top of the Dock Mid Rib.
Reset, hold both Home and Power buttons for about 10 seconds until the iPhone restarts itself, ignore the 'slide to power off' slider.
Restore Firmware, at end when iTunes asks, Restore as New, not from backup.

How to connect my ipad with mac using bluetooth?

how to connect my ipad with mac using bluetooth?

You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
iOS: Supported Bluetooth profiles

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

WM TO with differences using KANBAN

Similar Messages

Maybe you are looking for