21.01.2008 18:57:48 - 03.04.2008 13:16:47 difference use function module

Hi Kumar,
Try the FM CCU_TIMESTAMP_DIFFERENCE.
Here u need to pass the data in time stamp.
i.e YYYYMMDDHHMMSS format
Take 2 variable as same type as of FM
CCUPEAKA-TIMESTAMP
In ur example u have to pass 20080403185748 in TIMESTAMP1 and 20080121131647 in TIMESTAMP2
U will get the difference in seconds in parameter DIFFERENCE as 6,327,661. U can convert this as per ur requirement by deviding with 60.
EG: diff in min = 6,327,661/60
diff in hr = 6,327,661/3600
diff in days = 6,327,661/86400
Thanks,
Vinod.

Similar Messages

Crystal Reports 2008 can't see/access ECC function module

My team is developing our first Crystal Report directly against ECC data and are experiencing the following problem:
Our ABAP team created a custom RFC to provide the needed data, but we are unable to see a full list of available Functions and list of available tables from SAP ECC data source.
We worked with Security and temporarily ran under SAP_ALL authority but were still unable to see/ access the function module. We have the integration kit installed and can see some function modules from within Crystal, just not the ones we need. Is there some trick to creating a function module so that it is visible to Crystal?
Environment Details:
Crystal reports Version- 12.2.3.467
SAP GUI # 7200.1.2.1051
CRDB_OpenSQL.Dll # 12.2.3.467

Hi Ingo. I enjoyed your BO 4 seminar and meeting you at ASUG/Sapphire. I was hoping you'd pick this up.
The connection options shows the info below. It doesn't seem to be telling us how to filter to either select or exclude SAP ECC function modules. It has options to? Are these options correct to see ECC function modules and should we be seeing other options?
Database tab (only tab in dialog)
- Show name description or both (Show description selected)
- Sort tables or fields alphabetically (sort tables selected)
- Select tables, views, system tables, synonyms, and stored procedures (all except synonyms selected)
- Table like and owner like (both blank)
Advanced Options (x = selected)
- (X) Use indexes on server
- ( ) perform grouping on server
- (X) Database Server is case sensistive
- (X) Select Distinct for Browsing
- ( ) Perform query async
- (X) Verify on first refresh
- ( ) Verify stored procedures on first refresh
- (X) verify when database driver upgraded
- (X) Automatic smart linking

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.

Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Do you mean Office 2008 and 2011 or do you really want Office 2001? I think you mean 2011 since Office 2001 wouldn't make much sense.
The Office uninstaller should be able to identify there are two versions and allow you to delete either one or both.

How to make a Word for Mac 2008 doc into a PDF using Acrobat Macintosh

Any ideas how to turn a Word for Mac 2008 document into a PDF using Acrobat Pro?
Thank you if you can help.

In Word 2008 for Mac:
go to Save As... from File menu.
when window open click on Button show the current file type.
when thi menu drops down you will see the following
Choose PDF
save.
Then open up in Acrobat.

Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Maverick... is that possible? I read compatibility requirement of 10.6.8 or later...

Hi! Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Mavericks like I was advised in the Apple/Switch store... is that possible? I read compatibility requirement of 10.6.8 or later...???? Thanks for any guidance!

Before installation you should back up all your data.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Can a 2008 mac book 4.1 use a ssd? Also what is max RAM upgr?

Can a 2008 mac book 4.1 use a SSD? Also what is max RAM upgrade possible beyond 4GB?

Does it matter on the SATA II or III, for the bus?

Should I upgrade the internal hdd on my 2008 8.1 iMac or use an external drive?

I have an external hdd right now it is a 500gb go seagate goflex with a number of iTunes folders that I put on from my windows pc. I just received this 2008 2.4ghz core 2 duo 8.1 iMac and tried to import the files. The internal hdd is only 250gb so they would not fit, when I tried to get iTunes to run from the external drive it would but I would have to manually open each artist then album then song I wanted in the Finder for it to play. The songs do not show up automatically in iTunes, even though I think I followed all of the instructions for external hdd support. I was going to buy a new iMac and have the genius set it up, but now I think I am going to upgrade the RAM myself and am deciding wether or not I should also replace the internal hdd to 2TB or just get an external hdd so when I get a new iMac, maybe next year, I could still use it. However, I don't want to get another, larger external hdd if I'm going to have a hard time transferring all of my media to iTunes. Can I pay to have an apple genius do this at the store? I just upgraded the operating system to Snow Leopard and am waiting to upgrade RAM before moving to Mountain Lion. I just want my iTunes to sync up, at this point I will do just about anything, short of buying a new Mac. Thanks for any help.

You can keep your iTunes collection on an external drive. You can also keep just bulky items that you may not want to see often such as movies and just keep smaller items on the internal drive. This split option is more tricky but there are several ways to do it.
If all you have is a modest music collection, you can manage with an internal drive. Most modern media collections with huge movies files fast outpace even larger internal hard drives and you will have to resort to an external drive. Your computer dating from 2008 is (according to Apple's coproration standards) on its way to becoming a museum piece (hey, I still use a 10 year old computer, but Apple gave up hope for me years ago). I would not upgrade the internal drive. That will cost you a lot and be tricky to take with you to your next computer. An external drive you can just plug into a new computer.
Some of the issues you are encountering are because you do not yet know how to properly manage and transfer iTunes files. We can help you, or you can pay somebody a lot of money to do this for you on a regular basis.
Your GoFlex drive was used with Windows. Macs and Windows use different drive formats. If you are now using Mac-only then you will need to reformat the drive (you will need to store all those files elsewhere while you are doing this).
Do not buy just one external drive. When that drive fails (oh, and believe me, it will) your whole collection will be lost. Some of it you may be able to download again from Apple, but Apple does not "store" your iTunes collection, it is up to you to ensure its safety.

"Access Control - Do Not Inherit" Grayed out when setting up a backup on Server 2008 R2 when trying to use remote NAS

I see one response here:
http://social.technet.microsoft.com/Forums/en-US/c99eead0-e2fc-4c83-8cb2-959d03512667/server-2008-r2-dc-backup-greys-out-do-not-inherit-option-for-file-share-backup
But it makes no sense to me. Running that command doesn't do anything.
How do I make the box stop graying out when setting up a backup with the GUI interface? This should be really simple I would think and for some reason the backup utility is graying out the "Do Not Inherit" option so I can backup to the NAS
device that has access control enabled in order to backup to the NAS.
Thanks in advance!

Hi,
From this article, it mentioned that it is by design that we cannot choose "do not inherit" in backup schedule when backup target is a remote shared folder.
Checklist: Schedule Automatic Backups
http://technet.microsoft.com/en-us/library/cc732540.aspx
If you use a remote shared folder, make sure that the folder is available, that you have write access to the folder, and that you are a member of the Administrators group or Backup Operators group on the computer hosting the folder. Each time you create
a backup, it will overwrite the older backups so that you will only have one backup at a time.
The backup will inherit the access control list (ACL) permissions of the folder.
For the account it required, as mentioned above, it should be "a member of Admin group or Backup Operators group, and it should have write permission on target folder".
Also map a network folder as a drive will not help show the mapped drive letter in backup destination. It is still a remote shared folder.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Windows 7 / 2008 duplicate static address when using 802.1x / MAB - ISE

Hi all!
ISE 1.1.3
Cisco 3750 switches
Windows XP / 7 / 2008 clients
I'm having some weird issues were if a client connects to a switchport and happens to be using a static IP address then the client warns of a duplicate address problem. Also the client will then only show the default gateway within ipconfig even though the IP address / mask is still in the GUI network properties of the adaptor. This is happening with Windows 7 and Windows 2008 devices.
Windows XP clients don't get the issue.
Some clients will use 802.1x native supplicant and some will be authenticated based on MAB. Not noticed the problem with 802.1x clients but it always occurs on MAB.
I came across a similar issue here:
http://networkingblog.vvlabs.com/2012/07/cisco-ise-duplicate-ip-address-windows-7.html
Going of that blog I tried using the "ip device tracking delay probe delay" command but the switches don't recognise the "delay" keyword.
The switches are 3750 switches running version 12.2(58)SE2.
All I have is "count, interval, use-svi" as extra options.
Catalyst 4500 switch guide has "delay" option but no "count, interval or use-svi".
The only way I have managed to avoid the problem is using the second solution which is a registry hack on each client. This is fine for the odd server but not realistic when there will be hundreds of other clients.
Any ideas?

Hi
We are doing 802.1x for clients using the Windows supplicant. For clients not using supplicants we are using MAB. So the print servers and printers use MAB.
Extract of config...
aaa new-model
aaa authentication login default local
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa accounting system default start-stop group radius
aaa server radius dynamic-author
client x server-key 7 x
client x server-key 7 x
aaa session-id common
clock summer-time BST recurring last Sun Mar 23:00 last Sun Oct 23:00
system mtu routing 1500
vtp mode transparent
authentication mac-move permit
ip routing
no ip domain-lookup
ip device tracking
dot1x system-auth-control
dot1x critical eapol
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet1/0/1
description ### Dot1x with MAB fallback ###
switchport mode access
switchport voice vlan 2
ip access-group ACL-DEFAULT in
srr-queue bandwidth share 10 10 60 20
priority-queue out
authentication event fail action next-method
authentication event server dead action authorize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer restart 0
authentication timer reauthenticate server
authentication violation restrict
mab
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
dot1x pae authenticator
dot1x timeout tx-period 5
spanning-tree portfast
service-policy input AutoQoS-Police-CiscoPhone
ip http server
ip http secure-server
ip access-list extended ACL-DEFAULT
remark Deny access to new network
deny ip any 172.x.x.x 0.0.0.255 log
remark Allow everything else to other networks
permit ip any any
ip radius source-interface Vlan2
logging esm config
logging host x transport udp port 20514
logging host x transport udp port 20514
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 30 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-1
address ipv4 x auth-port 1645 acct-port 1646
key 7 x
radius server ISE-2
address ipv4 x auth-port 1645 acct-port 1646
key 7 x

Bulk-create printer objects on windows 2008 R2 x64 print servers using Windows PowerShell

Hi,
I have an issue on a 2008 Server R2 x64 when trying to create a printer with this Powershell script:
function CreatePrinter {
$server = $args[0]
$print = ([WMICLASS]"\\$server\ROOT\cimv2:Win32_Printer").createInstance()
$print.drivername = $args[1]
$print.PortName = $args[2]
$print.Shared = $true
$print.Sharename = $args[3]
$print.Location = $args[4]
$print.Comment = $args[5]
$print.DeviceID = $args[6]
$print.Put()
function CreatePrinterPort {
$server = $args[0]
$port = ([WMICLASS]"\\$server\ROOT\cimv2:Win32_TCPIPPrinterPort").createInstance()
$port.Name= $args[1]
$port.SNMPEnabled=$false
$port.Protocol=1
$port.HostAddress= $args[2]
$port.Put()
$printers = Import-Csv c:\printers.csv
foreach ($printer in $printers) {
CreatePrinterPort $printer.Printserver $printer.Portname $printer.IPAddress
CreatePrinter $printer.Printserver $printer.Driver $printer.Portname $printer.Sharename $printer.Location $printer.Comment $printer.Printername
The printer port creation work fine, but I have this error on the printer creator:
Exception calling “Put” with “0″ argument(s): “Generic failure ”
At C:\temp\createprinter.ps1:53 char:12
+ $print.Put <<<< ()
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Note: I first install the drivers manually.
Then i have tried with several win32 drivers and the issue is always the same.
I have tried on windows 2003 and it works like a charm…
Any idea ?
Help would be appreciated

I just ran through these commands on 2008 R2 Enterprise with no issues. I would try adding the printer with commands outside of the function to narrow it down to a problem with how the arguments are being passed, or if it's something with the driver being
specified.
PS C:\> $port = [wmiclass]"Win32_TcpIpPrinterPort"
PS C:\> $newPort = $port.CreateInstance()
PS C:\> $newPort.name = "IP_192.168.1.21"
PS C:\> $newPort.Protocol = 1
PS C:\> $newPort.HostAddress = "192.168.1.21"
PS C:\> $newPort.PortNumber = "9100"
PS C:\> $newPort.Put()
Path : \\.\root\cimv2:Win32_TCPIPPrinterPort.Name="IP_192.168.1.21"
RelativePath : Win32_TCPIPPrinterPort.Name="IP_192.168.1.21"
Server : .
NamespacePath : root\cimv2
ClassName : Win32_TCPIPPrinterPort
IsClass : False
IsInstance : True
IsSingleton : False
PS C:\> $wmiPrinter = [wmiclass]"Win32_Printer"
PS C:\> $newPrinter = $wmiPrinter.CreateInstance()
PS C:\> $newPrinter.DriverName = "HP LaserJet 4100 Series PCL6"
PS C:\> $newPrinter.PortName = "IP_192.168.1.21"
PS C:\> $newPrinter.DeviceID = "TestPrinter"
PS C:\> $newPrinter.Put()
Path : \\.\root\cimv2:Win32_Printer.DeviceID="TestPrinter"
RelativePath : Win32_Printer.DeviceID="TestPrinter"
Server : .
NamespacePath : root\cimv2
ClassName : Win32_Printer
IsClass : False
IsInstance : True
IsSingleton : False
PS C:\>

Exchange Server 2010 - Problem configuring my server 2008 so my clients can use Outlook to send/receive e-mails

Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advance

Hi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support

2008 R2 - Memory Leak from svchost.exe - Module "rpcrt4" is the culprit

Hi All
Over the past week or so (after a set of Windows updates and restart) svchost.exe has increasingly used more and more memory. It probably gobbles up an extra 1GB per day and doesn't relent.
After running various diagnostics, the debug diagnostic tool finally provided me this information after a memory leak test:
rpcrt4.dll is responsible for 1.76 GBytes worth of outstanding allocations. The following are the top 2 memory consuming functions:
rpcrt4!AllocWrapper+2b: 1.76 GBytes worth of outstanding allocations.
rpcrt4!Ndr64ClientInitialize+964: 1.36 MBytes worth of outstanding allocations.
Detailed module report(Memory)
Module details for rpcrt4
Module Name rpcrt4
Allocation Count 946941 allocation(s)
Allocation Size 1.76 GBytes
Module Information
Image Name: C:\Windows\System32\rpcrt4.dll Symbol Type: PDB
Base address: 0x00000003`00905a4d Time Stamp: Sat Nov 20 13:13:18 2010
Checksum: 0x00000000`00000000 Comments:
COM DLL: True Company Name: Microsoft Corporation
ISAPIExtension: False File Description: Remote Procedure Call Runtime
ISAPIFilter: False File Version: 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Managed DLL: False Internal Name: rpcrt4.dll
VB DLL: False Legal Copyright: © Microsoft Corporation. All rights reserved.
Loaded Image Name: rpcrt4.dll Legal Trademarks:
Mapped Image Name: Original filename: rpcrt4.dll
Module name: rpcrt4 Private Build:
Single Threaded: False Product Name: Microsoft® Windows® Operating System
Module Size: 1.18 MBytes Product Version: 6.1.7601.17514
Symbol File Name: c:\symcache\rpcrt4.pdb\7D748DA6D7454C9EA38C8CEF1C9E75F22\rpcrt4.pdb Special Build: &
rpcrt4!AllocWrapper+2b has 944,468 allocations!
I'm running 2008 R2 64bit with anywhere up to 80/100 simultaneous RDP connections at any one time.
Can anyone help or advise as I cannot find any hotfixes for this issue.
Thanks
Ryan

Hi Ryan,
Please narrow it down to the specific service that is having the issue. That way you will know where to focus on.
For the specific svchost.exe that is showing the large memory usage, use task manager/process explorer/etc. to determine which service(s) are running within it. If there are multiple services running within it, I recommend you isolate them and then
restart your server. For example, say you determined that the following services are running in the "problem" svchost.exe: AudioEndpointBuilder, Netman, TrkWks, UmRdpService, Uxsms. You would open an admin command prompt and enter the following
commands:
sc config AudioEndpointBuilder type= own
sc config Netman type= own
sc config TrkWks type= own
sc config UmRdpService type= own
sc config Uxsms type= own
After entering the above commands you would restart your server for the changes to take effect. Over time you would monitor memory usage of the suspect services, and eventually it will become apparent which one is using too much memory.
Thanks.
-TP

Early 2008 Mac Pro for home use

Hello guys,
I've been using usual Windows PCs at home (watching movies through HDMI, playing a few games - Counter Strike and random racing games), browsing internet, working in PS and Light room etc, but mostly for watching HD movies. But I was able to get myself Early 2008 Mac Pro - 10gb memory, two dual core intel xeon processors, 256 Ati Radeon graphics cards and 1tb ssd hard drive. Now I wanted to know how good is Mac Pro for home use? As I said I don't do many things with my windows based PC and wanted to switch to faster, quieter mac pro. Any opinions? How good it is as a home entertainment center?
P.S. Counter strike is available now for Mac, so I don't really care about other games.

dump the 2600XT and there I would pay for a Mac Edition AMD 7950, else PC card
1TB SSD is unusual gift
even though 8 cores it is 6 yrs old and most things don't use 8 cores that much, it predates the i7-920,
USB3 has to be added if you want it or put USB3 on your LAN router is what I do.
It does not get the official nod of support from Apple for Windows 8/8.1 but it does if you want run 7 or 7 Pro (dual cpu support)
FBDIMMs have gotten better and cheaper if you want or need to, many do, often due to early death.

Urgent !!! Error SSRS 2008 :The connection cannot be used while an XmlReader object is open."!!!

Hi,
I am trying to create report by writing MDx query. Just one hour back the report was working fine then i have done some changes it started throwing some error like
"An error occured during local report processing
An error has occured during report processing
Query execution failed for dataset'pDate'
The connection cannot be used while an XmlReader object is open."
The report is working withsome date combinations but when ever i am trying to display data with similar dates combinations like startdate: 01-01-2008 and Enddate:01-01-2008 then it is throwing error like this...
Could you please give any idea how to solve this...
Thanks...
maruthisp

While passing the Pdate parameters values to main report query, the parameter values was not proper for the main query. So I checked and modified the main report query to handle all the parameter values when I select from drop down selection.
Maruthi...

21.01.2008 18:57:48 - 03.04.2008 13:16:47 difference use function module

Similar Messages

Maybe you are looking for