WMI acces

Problems with WMI access.
I have limited acces to fix a sccm environment. My user is sccm admin. I use a dedicated account to push the client. It works on 40%. Now many computers return this errors:
---> Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
---> Attempting to connect to administrative share '\\comp_name\admin$' using account 'domain\admin' SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
---> Connected to administrative share on machine comp_name using account 'domain\admin' SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
---> Attempting to make IPC connection to share <\\comp_name\IPC$> SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
---> Searching for SMSClientInstall.* under '\\comp_name\admin$\' SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
---> Unable to connect to WMI on remote machine "comp_name", error = 0x800706ba. SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
---> Deleting SMS Client Install Lock File '\\comp_name\admin$\SMSClientInstall.PW1' SMS_CLIENT_CONFIG_MANAGER 15/10/2014 15:36:12 14252 (0x37AC)
I don't have rights to check in AD if the SCCM server has delegations on System Management Container. Autenteficated users dos not have rights on remote. How can I check what it is going on ?
Thanks.

Hi,
I've checked and I can telnet on 134 and 445. But still same error.
---> Unable to connect to WMI on remote machine "name", error = 0x800706be. SMS_CLIENT_CONFIG_MANAGER 24/10/2014 11:31:52 4764 (0x129C)
The networking guy find in logs that firewall blocks a conection from server to client on WMI 49154. Probably is related with:
RPC dynamic ports between the site server and the client
computer.
TCP
DYNAMIC
How can I fix that ? They cant open all ports for this Dynamic
Description
UDP
TCP
Server Message Block (SMB) between the site server and client computer.
                445
RPC endpoint mapper between the site server and the client computer.
135
                135
RPC dynamic ports between the site server and the client
computer.
              DYNAMIC
Hypertext Transfer Protocol (HTTP) from the client computer to a management point when the connection is over HTTP.
80 (See note 1, Alternate Port Available)
Secure Hypertext Transfer Protocol (HTTPS) from the client computer to a management point when the connection is over HTTPS.
443 (See note 1, Alternate Port Available)
Note:The dynamic RPC ports are until Windows XP and Windows Server 2003 (R2)
1025-5000 and from Vista and Windows Server 2008 (and later) 49152-65535

Similar Messages

Test WMI connection

Hello. I've been reading quite a bit about testing WMI connections towards remote computers, but I haven't quite found the answer I am looking for.
What I am going to do is several gwmi calls against all the computers in the domain. This will surely lead to several "The RPC server is unavailable" error messages as all computers will not be powered on and some "No Access" messages.
Since my script includes several gwmi calls for each computer I want to test the gwmi connectivity against each computer before I run all the gwmi calls. I want this test do be done as quickly as possible.
Some pages I've visited suggests using "Test-Connection", but that doesn't test towards for example "No Acces" does it?
I've found this (see code below) and I'm wondering if that is the best way to do it:
$wmi = gwmi win32_bios -ComputerName $pc-ErrorAction SilentlyContinue
if ($wmi)
#put all wmi calls here.
Kind regards,
Nils Rune

Hi, I try to use your script
$ping = New-Object System.Net.NetworkInformation.Ping
$Reply = $ping.send($strComputer)
if ($Reply.status –eq “Success”)
{ $WS.Cells.Item($row, 2) = "Online"
try {
$results = Test-Connection $strComputer
If ($results) {
$ws.rows.Item($row).Font.ColorIndex = "5"
$WS.Cells.Item($row,3) = "WMI OK" }
Else {
$ws.rows.Item($row).Font.ColorIndex = "3"
$WS.Cells.Item($row,3) = "WMI Failed" }
catch
Write-Host "Test-Connection Failed"
Else {
$WS.Cells.Item($row, 2) = "Does Not Ping"
$ws.rows.Item($row).Font.ColorIndex = "3"
BUT at the first line, I added this parameter to specify that the script has to read the computer'name
from a TXT file :
$strComputer = Get-Content "C:\Temp\ComputersList.txt"
When I run the script, I got the error : "You cannot call a method on a null-valued expression" Do you
have an idea please ?
Thank you

Acces dynamic configuration variable (e.g. filename) in ABAP mapping class

Hi experts
I am searching for a possibility to acces a dynamic configuration variable (DCV) in an ABAP mapping class. Since I could not find a solution in SDN and other sources, I hope somebody in this forum can help me.
What I already found is the following code which can be used to set a DCV, but what I would be interested in is how to read a DCV.
Any help is appreciated.
Markus
METHOD if_mapping~execute.
DATA l_record type mpp_dynamic.
* copy payload
result = source.
* add an adapter specific attribute
l_record-namespace = 'http://sap.com/xi/XI/System/File'.
l_record-name = 'FileName'.
l_record-value = 'test.xml'.
dynamic_configuration->add_record( l_record ).
ENDMETHOD.

Hi Markus,
you can find everything in my blogs
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
Regards,
michal

How do I access the EC Embedded Controller firmware level with wmi win32?

Hi
I have used the Win32 classes to access the Bios level, model, serial and asset number
The only data I cannot find is the EC firmware level
I cannot find it in any of the WIN32 classes
WIN32_BIOS
WIN32_BASEBOARD etc
Does anyone know if this accessible through the WIN32 classes?

Maybe this is what you mean. I just copied the code out of WMI Code Creator. Although I downloaded an MS Word document from this link
SMBIOS Support in Windows which has information that you may want to read. The first image below is a table from the document. 2nd image and 3rd image are WMI Code Creator launched Console which is displaying info you may want. I don't know what EC firmware
level is.
Imports System
Imports System.Management
Imports System.Windows.Forms
Namespace WMISample
Public Class MyWMIQuery
Public Overloads Shared Function Main() As Integer
Try
Dim searcher As New ManagementObjectSearcher( _
"root\WMI", _
"SELECT * FROM MS_SystemInformation")
For Each queryObj As ManagementObject in searcher.Get()
Console.WriteLine("-----------------------------------")
Console.WriteLine("MS_SystemInformation instance")
Console.WriteLine("-----------------------------------")
Console.WriteLine("Active: {0}", queryObj("Active"))
Console.WriteLine("BaseBoardManufacturer: {0}", queryObj("BaseBoardManufacturer"))
Console.WriteLine("BaseBoardProduct: {0}", queryObj("BaseBoardProduct"))
Console.WriteLine("BaseBoardVersion: {0}", queryObj("BaseBoardVersion"))
Console.WriteLine("BiosMajorRelease: {0}", queryObj("BiosMajorRelease"))
Console.WriteLine("BiosMinorRelease: {0}", queryObj("BiosMinorRelease"))
Console.WriteLine("BIOSReleaseDate: {0}", queryObj("BIOSReleaseDate"))
Console.WriteLine("BIOSVendor: {0}", queryObj("BIOSVendor"))
Console.WriteLine("BIOSVersion: {0}", queryObj("BIOSVersion"))
Console.WriteLine("ECFirmwareMajorRelease: {0}", queryObj("ECFirmwareMajorRelease"))
Console.WriteLine("ECFirmwareMinorRelease: {0}", queryObj("ECFirmwareMinorRelease"))
Console.WriteLine("InstanceName: {0}", queryObj("InstanceName"))
Console.WriteLine("SystemFamily: {0}", queryObj("SystemFamily"))
Console.WriteLine("SystemManufacturer: {0}", queryObj("SystemManufacturer"))
Console.WriteLine("SystemProductName: {0}", queryObj("SystemProductName"))
Console.WriteLine("SystemSKU: {0}", queryObj("SystemSKU"))
Console.WriteLine("SystemVersion: {0}", queryObj("SystemVersion"))
Next
Catch err As ManagementException
MessageBox.Show("An error occurred while querying for WMI data: " & err.Message)
End Try
End Function
End Class
End Namespace
La vida loca

How to create more than one window for a vi that can be acces anytime...just like using the creating new window in internet explorer

hello guys,
I want to create a vi such dat when I press a button on the frontpanel of the vi it opens the same vi in another window..and I should be able to work on this new window also able to work on the previous window without closing it...Just like opening a new window when using the internet explorer....
I try to make my vi a reetrant vi but when I click the new window button on my vi..a new clone windows open up that I can control but the previous windows is not accessible not I close the current window...I want a way that I can acces both vi window and d operation of one will not affect the other like when the indicators are updating in one window the other window will not update...
Thank you...
Solved!
Go to Solution.

The picture attached shows what i want to achieve as a vi or executable...The new window button opens a clone of the vi, but the previous window can not be operated on until i close the clone window...i want to be able to work on both window at any time without closing one of them....The vi was design in labview 2010
Attachments:
ni.jpg ‏66 KB
window vi.vi ‏8 KB

WMI filter working for some Windows 7 machines but not for others

I'm trying to use this WMI filter for our Windows 7 64bit machines:
select * from Win32_OperatingSystem where (Caption like "Microsoft Windows 7%") or (Version like "6.1%" and ProductType = "1" and OSArchitecture = "64 ビット") or (OSArchitecture like "64%" and ProductType =
"1")
The reason there are three clauses is that we have machines in United States, Japan, and France. The first clause works for the United States, the second clause works for Japan, and the third clause SHOULD work for France, but doesn't.
I've run the query manually on the French machine using WMITest.exe (http://www.paessler.com/tools/wmitester) and it works. However, when I run a gpresult /r it shows that the GPO is denied
due to the WMI filter.
Why is this happening for French computers only?

..the third clause SHOULD work for France, but doesn't.
I've run the query manually on the French machine using WMITest.exe (http://www.paessler.com/tools/wmitester) and it works. However, when I run a gpresult /r it shows that the GPO is denied
due to the WMI filter.
Why is this happening for French computers only?
just a thought - is it due to localisation of the OS (fr-FR), and maybe the WMITest.exe is not honouring that?
maybe, on a French OS, open CMD, run wmic os get osarchitecture ??
get somebody to give you a screengrab of that - just in case there's something funky going on.
(I don't work with multiple languages, so am not sure if localisation can cause your issue, but from your Japan example it looks like it might do so)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I can't acces to BIOS to change boot order on Satellite 2410

I can't acces to cmos to change boot priorityre. HELP !!!
Notebook Satellite S2410-504.
I try to normally press "C" on startup to boot from CD. but it don't work.
F12 too don't help.
I think some set some password on HWUtility, but how disable this pasword?
Please HELP!!!!

LOL... motherboard replacement? You dont need a new Motherboard.. Just a new flashed BIOS... Buy a new flashed BIOS... or ask someone to flash your old one...
Aaaand you can always update the BIOS with the wrong procedure :) as long as you dont reboot... If your highly skilled you will be also able to do the following trick...
Get a NB with the same BIOS and BIOS chip... Load the operating system... remove the BIOS chip while the operating system is... operating... Put the bad flashed or empty BIOS chip in the socket... Flash it... Now you got your accidentally bad flashed BIOS chip flashed...
To your BIOS Password problem Problem... I dont know, if Toshiba has build in a reset Jumper... But in Desktop systems, you can always reset the "complete" BIOS + Password with that jumper. Should be possible in Notebooks too...
Message was edited by: Stryker

I was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page

Quit the messages app and reset your phone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
After the phone restarts go into Messages and delete the thread containing the problem message.

DFS replication stopped working and cannot be debugged because WMI repository cannot be accessed

Hello,
two days ago our DFS replication suddendly stopped working sometime around midnight local time. At least this is what our second domain controller is reporting. Event log is flooded with event id 5002 from DFSR. It is unclear what caused this sudden problem
and even worse, how to solve it. First thing I tried was to perform propagation tests. According to propagation report none of them was successful. Creating an integrity report brought me to another problem: It fails with two errors. First it is unable to
connect to the other DC. Second it is unable to access local WMI repository. This is true for both machines.
First I tried to find information on possible problems with WMI. WMIdiag provided a lot of information. However, opinions I found on the net largely disagree whether output from WMIdiag is useful or not. Yet I tried to re-compile .mof files and rebuild the
repository. So far, nothing changed. This is my output from WMIdiag:
34309 13:02:46 (0) ** WMIDiag v2.1 started on Donnerstag, 22. Mai 2014 at 12:49.
34310 13:02:46 (0) **
34311 13:02:46 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
34312 13:02:46 (0) **
34313 13:02:46 (0) ** This script is not supported under any Microsoft standard support program or service.
34314 13:02:46 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
34315 13:02:46 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
34316 13:02:46 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
34317 13:02:46 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
34318 13:02:46 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
34319 13:02:46 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
34320 13:02:46 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
34321 13:02:46 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
34322 13:02:46 (0) ** of the possibility of such damages.
34323 13:02:46 (0) **
34324 13:02:46 (0) **
34325 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34326 13:02:46 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
34327 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34328 13:02:46 (0) **
34329 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34330 13:02:46 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'COM\ABCDEF' on computer 'DC2'.
34331 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34332 13:02:46 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
34333 13:02:46 (0) ** INFO: => 1 possible incorrect shutdown(s) detected on:
34334 13:02:46 (0) ** - Shutdown on 01 April 2014 10:20:54 (GMT-0).
34335 13:02:46 (0) **
34336 13:02:46 (0) ** System drive: ....................................................................................................... C: (Datenträgernr. 0 Partitionsnr. 1).
34337 13:02:46 (0) ** Drive type: ......................................................................................................... SCSI (Adaptec Array SCSI Disk Device).
34338 13:02:46 (0) ** There are no missing WMI system files: .............................................................................. OK.
34339 13:02:46 (0) ** There are no missing WMI repository files: .......................................................................... OK.
34340 13:02:46 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
34341 13:02:46 (0) ** AFTER running WMIDiag:
34342 13:02:46 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
34343 13:02:46 (0) ** - Disk free space on 'C:': .......................................................................................... 10665 MB.
34344 13:02:46 (0) ** - INDEX.BTR, 4276224 bytes, 22.05.2014 12:52:30
34345 13:02:46 (0) ** - MAPPING1.MAP, 67248 bytes, 22.05.2014 12:52:30
34346 13:02:46 (0) ** - MAPPING2.MAP, 67168 bytes, 22.05.2014 12:48:33
34347 13:02:46 (0) ** - OBJECTS.DATA, 23126016 bytes, 22.05.2014 12:52:30
34348 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34349 13:02:46 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
34350 13:02:46 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
34351 13:02:46 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
34352 13:02:46 (0) ** => This will prevent any WMI remote connectivity to this computer except
34353 13:02:46 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
34354 13:02:46 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
34355 13:02:46 (0) ** - 'Windows Management Instrumentation (WMI-In)'
34356 13:02:46 (0) ** - 'Windows Management Instrumentation (ASync-In)'
34357 13:02:46 (0) ** Verify the reported status for each of these three inbound rules below.
34358 13:02:46 (0) **
34359 13:02:46 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
34360 13:02:46 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
34361 13:02:46 (0) ** - You can adjust the configuration by executing the following command:
34362 13:02:46 (0) ** i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
34363 13:02:46 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
34364 13:02:46 (0) ** You can also enable each individual rule instead of activating the group rule.
34365 13:02:46 (0) **
34366 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34367 13:02:46 (0) ** DCOM Status: ........................................................................................................ OK.
34368 13:02:46 (0) ** WMI registry setup: ................................................................................................. OK.
34369 13:02:46 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
34370 13:02:46 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
34371 13:02:46 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
34372 13:02:46 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
34373 13:02:46 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
34374 13:02:46 (0) ** this can prevent the service/application to work as expected.
34375 13:02:46 (0) **
34376 13:02:46 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
34377 13:02:46 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
34378 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34379 13:02:46 (0) ** WMI service DCOM setup: ............................................................................................. OK.
34380 13:02:46 (0) ** WMI components DCOM registrations: .................................................................................. OK.
34381 13:02:46 (0) ** WMI ProgID registrations: ........................................................................................... OK.
34382 13:02:46 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
34383 13:02:46 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
34384 13:02:46 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
34385 13:02:46 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 1 WARNING(S)!
34386 13:02:46 (0) ** - ROOT/MICROSOFTACTIVEDIRECTORY, ReplProv1, replprov.dll
34387 13:02:46 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
34388 13:02:46 (0) ** This can be due to:
34389 13:02:46 (0) ** - the de-installation of the software.
34390 13:02:46 (0) ** - the deletion of some files.
34391 13:02:46 (0) ** => If the software has been de-installed intentionally, then this information must be
34392 13:02:46 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
34393 13:02:46 (0) ** the provider registration data.
34394 13:02:46 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\MICROSOFTACTIVEDIRECTORY path __Win32Provider Where Name='ReplProv1' DELETE'
34395 13:02:46 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
34396 13:02:46 (0) ** You can retrieve the missing file from:
34397 13:02:46 (0) ** - A backup.
34398 13:02:46 (0) ** - The Windows CD.
34399 13:02:46 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
34400 13:02:46 (0) ** - The original CD or software package installing this WMI provider.
34401 13:02:46 (0) **
34402 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34403 13:02:46 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
34404 13:02:46 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
34405 13:02:46 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
34406 13:02:46 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
34407 13:02:46 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
34408 13:02:46 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
34409 13:02:46 (0) **
34410 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34411 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
34412 13:02:46 (0) ** - REMOVED ACE:
34413 13:02:46 (0) ** ACEType: &h0
34414 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34415 13:02:46 (0) ** ACEFlags: &h0
34416 13:02:46 (0) ** ACEMask: &h7
34417 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34418 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34419 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34420 13:02:46 (0) **
34421 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34422 13:02:46 (0) ** Removing default security will cause some operations to fail!
34423 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34424 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34425 13:02:46 (0) **
34426 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34427 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34428 13:02:46 (0) ** - REMOVED ACE:
34429 13:02:46 (0) ** ACEType: &h0
34430 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34431 13:02:46 (0) ** ACEFlags: &h0
34432 13:02:46 (0) ** ACEMask: &h7
34433 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34434 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34435 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34436 13:02:46 (0) **
34437 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34438 13:02:46 (0) ** Removing default security will cause some operations to fail!
34439 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34440 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34441 13:02:46 (0) **
34442 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34443 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34444 13:02:46 (0) ** - REMOVED ACE:
34445 13:02:46 (0) ** ACEType: &h0
34446 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34447 13:02:46 (0) ** ACEFlags: &h0
34448 13:02:46 (0) ** ACEMask: &h7
34449 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34450 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34451 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34452 13:02:46 (0) **
34453 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34454 13:02:46 (0) ** Removing default security will cause some operations to fail!
34455 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34456 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34457 13:02:46 (0) **
34458 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34459 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34460 13:02:46 (0) ** - REMOVED ACE:
34461 13:02:46 (0) ** ACEType: &h0
34462 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34463 13:02:46 (0) ** ACEFlags: &h0
34464 13:02:46 (0) ** ACEMask: &h1F
34465 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34466 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34467 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34468 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34469 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34470 13:02:46 (0) **
34471 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34472 13:02:46 (0) ** Removing default security will cause some operations to fail!
34473 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34474 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34475 13:02:46 (0) **
34476 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34477 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34478 13:02:46 (0) ** - REMOVED ACE:
34479 13:02:46 (0) ** ACEType: &h0
34480 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34481 13:02:46 (0) ** ACEFlags: &h0
34482 13:02:46 (0) ** ACEMask: &h1F
34483 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34484 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34485 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34486 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34487 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34488 13:02:46 (0) **
34489 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34490 13:02:46 (0) ** Removing default security will cause some operations to fail!
34491 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34492 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34493 13:02:46 (0) **
34494 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34495 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34496 13:02:46 (0) ** - REMOVED ACE:
34497 13:02:46 (0) ** ACEType: &h0
34498 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34499 13:02:46 (0) ** ACEFlags: &h0
34500 13:02:46 (0) ** ACEMask: &h1F
34501 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34502 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34503 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34504 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34505 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34506 13:02:46 (0) **
34507 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34508 13:02:46 (0) ** Removing default security will cause some operations to fail!
34509 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34510 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34511 13:02:46 (0) **
34512 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34513 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34514 13:02:46 (0) ** - REMOVED ACE:
34515 13:02:46 (0) ** ACEType: &h0
34516 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34517 13:02:46 (0) ** ACEFlags: &h0
34518 13:02:46 (0) ** ACEMask: &h1F
34519 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34520 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34521 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34522 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34523 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34524 13:02:46 (0) **
34525 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34526 13:02:46 (0) ** Removing default security will cause some operations to fail!
34527 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34528 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34529 13:02:46 (0) **
34530 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34531 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34532 13:02:46 (0) ** - REMOVED ACE:
34533 13:02:46 (0) ** ACEType: &h0
34534 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34535 13:02:46 (0) ** ACEFlags: &h0
34536 13:02:46 (0) ** ACEMask: &h1F
34537 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34538 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34539 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34540 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34541 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34542 13:02:46 (0) **
34543 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34544 13:02:46 (0) ** Removing default security will cause some operations to fail!
34545 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34546 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34547 13:02:46 (0) **
34548 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34549 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34550 13:02:46 (0) ** - REMOVED ACE:
34551 13:02:46 (0) ** ACEType: &h0
34552 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34553 13:02:46 (0) ** ACEFlags: &h0
34554 13:02:46 (0) ** ACEMask: &hB
34555 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34556 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34557 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34558 13:02:46 (0) **
34559 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34560 13:02:46 (0) ** Removing default security will cause some operations to fail!
34561 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34562 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34563 13:02:46 (0) **
34564 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34565 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34566 13:02:46 (0) ** - REMOVED ACE:
34567 13:02:46 (0) ** ACEType: &h0
34568 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34569 13:02:46 (0) ** ACEFlags: &h0
34570 13:02:46 (0) ** ACEMask: &h1F
34571 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34572 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34573 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34574 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34575 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34576 13:02:46 (0) **
34577 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34578 13:02:46 (0) ** Removing default security will cause some operations to fail!
34579 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34580 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34581 13:02:46 (0) **
34582 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34583 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34584 13:02:46 (0) ** - REMOVED ACE:
34585 13:02:46 (0) ** ACEType: &h0
34586 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34587 13:02:46 (0) ** ACEFlags: &h0
34588 13:02:46 (0) ** ACEMask: &h1F
34589 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34590 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34591 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34592 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34593 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34594 13:02:46 (0) **
34595 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34596 13:02:46 (0) ** Removing default security will cause some operations to fail!
34597 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34598 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34599 13:02:46 (0) **
34600 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34601 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34602 13:02:46 (0) ** - REMOVED ACE:
34603 13:02:46 (0) ** ACEType: &h0
34604 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34605 13:02:46 (0) ** ACEFlags: &h0
34606 13:02:46 (0) ** ACEMask: &h1F
34607 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34608 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34609 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34610 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34611 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34612 13:02:46 (0) **
34613 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34614 13:02:46 (0) ** Removing default security will cause some operations to fail!
34615 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34616 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34617 13:02:46 (0) **
34618 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34619 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
34620 13:02:46 (0) ** - REMOVED ACE:
34621 13:02:46 (0) ** ACEType: &h0
34622 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34623 13:02:46 (0) ** ACEFlags: &h0
34624 13:02:46 (0) ** ACEMask: &h1F
34625 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34626 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34627 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34628 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34629 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34630 13:02:46 (0) **
34631 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34632 13:02:46 (0) ** Removing default security will cause some operations to fail!
34633 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34634 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34635 13:02:46 (0) **
34636 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34637 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
34638 13:02:46 (0) ** - REMOVED ACE:
34639 13:02:46 (0) ** ACEType: &h0
34640 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34641 13:02:46 (0) ** ACEFlags: &h0
34642 13:02:46 (0) ** ACEMask: &h1F
34643 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34644 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34645 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34646 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34647 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34648 13:02:46 (0) **
34649 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34650 13:02:46 (0) ** Removing default security will cause some operations to fail!
34651 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34652 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34653 13:02:46 (0) **
34654 13:02:46 (0) **
34655 13:02:46 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
34656 13:02:46 (0) ** DCOM security error(s) detected: .................................................................................... 14.
34657 13:02:46 (0) ** WMI security warning(s) detected: ................................................................................... 0.
34658 13:02:46 (0) ** WMI security error(s) detected: ..................................................................................... 0.
34659 13:02:46 (0) **
34660 13:02:46 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
34661 13:02:46 (0) ** Overall WMI security status: ........................................................................................ OK.
34662 13:02:46 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
34663 13:02:46 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
34664 13:02:46 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
34665 13:02:46 (0) ** 'select * from MSFT_SCMEventLogEvent'
34666 13:02:46 (0) **
34667 13:02:46 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
34668 13:02:46 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
34669 13:02:46 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
34670 13:02:46 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
34671 13:02:46 (0) ** - ROOT/SERVICEMODEL.
34672 13:02:46 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
34673 13:02:46 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
34674 13:02:46 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
34675 13:02:46 (0) ** i.e. 'WMIC.EXE /NODE:"ISWDC2" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
34676 13:02:46 (0) **
34677 13:02:46 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
34678 13:02:46 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
34679 13:02:46 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 32 ERROR(S)!
34680 13:02:46 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34681 13:02:46 (0) ** MOF Registration: ''
34682 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34683 13:02:46 (0) ** MOF Registration: ''
34684 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34685 13:02:46 (0) ** MOF Registration: ''
34686 13:02:46 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34687 13:02:46 (0) ** MOF Registration: ''
34688 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34689 13:02:46 (0) ** MOF Registration: ''
34690 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34691 13:02:46 (0) ** MOF Registration: ''
34692 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34693 13:02:46 (0) ** MOF Registration: ''
34694 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34695 13:02:46 (0) ** MOF Registration: ''
34696 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34697 13:02:46 (0) ** MOF Registration: ''
34698 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34699 13:02:46 (0) ** MOF Registration: ''
34700 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34701 13:02:46 (0) ** MOF Registration: ''
34702 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34703 13:02:46 (0) ** MOF Registration: ''
34704 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34705 13:02:46 (0) ** MOF Registration: ''
34706 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34707 13:02:46 (0) ** MOF Registration: ''
34708 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34709 13:02:46 (0) ** MOF Registration: ''
34710 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34711 13:02:46 (0) ** MOF Registration: ''
34712 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34713 13:02:46 (0) ** MOF Registration: ''
34714 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34715 13:02:46 (0) ** MOF Registration: ''
34716 13:02:46 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34717 13:02:46 (0) ** MOF Registration: ''
34718 13:02:46 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34719 13:02:46 (0) ** MOF Registration: ''
34720 13:02:46 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34721 13:02:46 (0) ** MOF Registration: ''
34722 13:02:46 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34723 13:02:46 (0) ** MOF Registration: ''
34724 13:02:46 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34725 13:02:46 (0) ** MOF Registration: ''
34726 13:02:46 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34727 13:02:46 (0) ** MOF Registration: ''
34728 13:02:46 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34729 13:02:46 (0) ** MOF Registration: ''
34730 13:02:46 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34731 13:02:46 (0) ** MOF Registration: ''
34732 13:02:46 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34733 13:02:46 (0) ** MOF Registration: ''
34734 13:02:46 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34735 13:02:46 (0) ** MOF Registration: ''
34736 13:02:46 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34737 13:02:46 (0) ** MOF Registration: ''
34738 13:02:46 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34739 13:02:46 (0) ** MOF Registration: ''
34740 13:02:46 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34741 13:02:46 (0) ** MOF Registration: ''
34742 13:02:46 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34743 13:02:46 (0) ** MOF Registration: ''
34744 13:02:46 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
34745 13:02:46 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
34746 13:02:46 (0) ** You can refresh the WMI class provider buffer with the following command:
34747 13:02:46 (0) **
34748 13:02:46 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
34749 13:02:46 (0) **
34750 13:02:46 (0) ** WMI MOF representations: ............................................................................................ OK.
34751 13:02:46 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
34752 13:02:46 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
34753 13:02:46 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
34754 13:02:46 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
34755 13:02:46 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34756 13:02:46 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34757 13:02:46 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
34758 13:02:46 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34759 13:02:46 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34760 13:02:46 (0) **
34761 13:02:46 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
34762 13:02:46 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
34763 13:02:46 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
34764 13:02:46 (0) ** WMI static instances retrieved: ..................................................................................... 1822.
34765 13:02:46 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
34766 13:02:46 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
34767 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34768 13:02:46 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
34769 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34770 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34771 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34772 13:02:46 (0) **
34773 13:02:46 (0) ** # of additional Event Log events AFTER WMIDiag execution:
34774 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34775 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34776 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34777 13:02:46 (0) **
34778 13:02:46 (0) ** 32 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
34779 13:02:46 (0) ** => This error is typically a WMI error. This WMI error is due to:
34780 13:02:46 (0) ** - a missing WMI class definition or object.
34781 13:02:46 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
34782 13:02:46 (0) ** You can correct the missing class definitions by:
34783 13:02:46 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
34784 13:02:46 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
34785 13:02:46 (0) ** (This list can be built on a similar and working WMI Windows installation)
34786 13:02:46 (0) ** The following command line must be used:
34787 13:02:46 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
34788 13:02:46 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
34789 13:02:46 (0) ** with WMI by starting the ADAP process.
34790 13:02:46 (0) ** - a WMI repository corruption.
34791 13:02:46 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
34792 13:02:46 (0) ** to validate the WMI repository operations.
34793 13:02:46 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
34794 13:02:46 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
34795 13:02:46 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
34796 13:02:46 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
34797 13:02:46 (0) ** the WMI repository must be reconstructed.
34798 13:02:46 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
34799 13:02:46 (0) ** otherwise some applications may fail after the reconstruction.
34800 13:02:46 (0) ** This can be achieved with the following command:
34801 13:02:46 (0) ** i.e. 'WMIDiag ShowMOFErrors'
34802 13:02:46 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
34803 13:02:46 (0) ** ALL fixes previously mentioned.
34804 13:02:46 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
34805 13:02:46 (0) **
34806 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34807 13:02:46 (0) ** WMI Registry key setup: ............................................................................................. OK.
34808 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34809 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34810 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34811 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34812 13:02:46 (0) **
34813 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34814 13:02:46 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
34815 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34816 13:02:46 (0) **
34817 13:02:46 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\ABCDEF\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_ISWDC2_2014.05.22_12.49.13.LOG' for details.
34818 13:02:46 (0) **
34819 13:02:46 (0) ** WMIDiag v2.1 ended on Donnerstag, 22. Mai 2014 at 13:02 (W:89 E:52 S:1).
There are a lot of error in the report and I don't know, whether they are relevant or how to solve them. To my current knowledge, I need to solve at least some of them so that I can access the local WMI repository again and get replication back working.
But after hours of research I am stuck. Any hints are greatly appreciated.
Regards,
Oliver

I don't know why, but soon after posting this, I found a solution to the problem. The WMI part was solved in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
The relevant portion is this:
Open a CMD prompt in %windir%\system32\wbem
mofcomp dfsrprovs.mof
net stop winmgmt
net start winmgmt
net start iphlpsvc
net stop dfsr
net start dfsr
I don't know why recompiling of all mof did not solve the problem, but the solution above did. Restarting the DCs solved the communication issue. I don't know why the primary DC forgot about the WMI DFS provider or why communication failed. However, it is
working again, it seems.

Recently I update Firefox and now I can't acces to my router

Recently I update Firefox and now I can't acces to my router main page any more.
Before I get a window that ask me to add an exception, cause the certificate ... as I check the remember the exception it always ask me for the exception. was not so bad as I have ask any time for the exception and finally I have acces to it . But now NO WAY !!!
I still go to internet, all my computers are connected but I could'nt reach the router to change some settings and add news computers ( my settings are very secure on my router to add a device I have to enter the MAC address). I still get my printer at 192.168.3.141, the modem at 192.168.1.1 but when I want to go to the router main page 192.168.3.1, I get this message :
Secure Connection Failed
An error occurred during a connection to 192.168.3.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
I read that FF change some settings on the new versions and last time I enter on my router without problems was on October 10.
Now I have installed the 33.0.1 my OS Is XP.
PLEASE HELP WITH THAT ISSUE
EDIT: I suspect that my problem have to be with the certificate manager because I see it change a lot on this version, and have a place to add exception security like the old one that I use to have to check in the past.
it look like the same problem as me:
https://bugzilla.mozilla.org/show_bug.cgi?id=1042889
I don't understand almost nothing about certificates then I didn't find any tutorial explaining how to deal with. Also I sow that was totally diferent have some ssl things to check and now is a OCSP ??? for me all still chinesse (lol) I only want someting very simple: reach my router !!!.
I only see on authorities many times my router address, I try to add an exception and say the certificate couldn't be found. I don't know how to play with all this settings , but I'm shure have relation to my problem.
Sorry, my english it's not the best.

[SOLVED)
@the-edmeister That work !!! thank you very much. I have to put it at SSLv3 option to this work.
I have a question for you. How I could figure out to work with that in the future? could I add an exception on the certificates? or something like that to still let me enter on my router web page? or how I could figure out to make any change on tomato router to still work with the new standard? .

SCCM 2012 R2 CU2 Can't Edit WMI Query Code in Report Builder

I first posted this in the SCCM but the issue is not solved so I thought I'd try here in the SQL Reporting forum. Original thread here: http://social.technet.microsoft.com/Forums/en-US/b0a6ca3d-7471-4b49-8447-7403a65c2ec0/sccm-2012-r2-cu2-cant-edit-wmi-query-code-in-sccm-reports?forum=configmanagergeneral
I'll repost info here to make this easier.....
I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. This also uses SQL 2012 SP1 CU6. This suite has 4 servers: site server, two for WSUS and secondary DPs, and SQL. This problem is true for the built in reports and my custom reports. Our SQL guy has
been helping me a lot but we've gotten nowhere. I can run a report. I can open one in edit mode after it prompts me for credentials. It loads Report Builder 3.0. But when I go to a dataset/query, enter credentials, and try to open it, I get a popup that
says "Unable to connect to data source. 'AutoGen_5C6358F2_yayak..." When I click on details it says "The target principal name is incorrect. A connection was succesfully established with the server, but then an error occurred during the login
process. (SSL Provider, error: 0 -The target principal name is incorrect.)" In SQL Reporting Services Config Manager the paths for Web Service URL is
http://ip.ip.ip.ip:80/ReportServer_SC01 and for Report Manager URL:
http://ip.ip.ip.ip:80/Reports_SC01. A domain account is used to login. This happens when you r-click a dataset and select query to edit the code of a dataset, ie, when query designer tries to open up. It happens
in both Admin Console and when using the Report Manager URL within SQL SSRS. All other functions of using edit mode of a report work fine.
Ben JohnsonWY

When I do that, browse is dimmed out.
But, if I deselect "create a data set" and click "choose an existing dataset in this report..." there is no data connection at the end.
But if I don't use report builder and instead use IE to browse to my ConfigMgr_ABC, I do see the connection at the end: {123...}.
This problem is on a network that is not on the 'net, so it's hard to do screen shots, so I'll reproduce this problem step by step:
I pick a report to edit, it doesn't matter which one.
If I try it in Admin Console, I right-click, Edit the report, it asks me for a login, I login, then I get a popup that says "Cannot continue. The application is improperly formatted. Contact the vendor for assistance. I click the Details button and
get a long set of text but the key part is "Your web browser settings do not allow you to run signed applications." This msg didn't appear before, so something changed, so I will investigate. I think it used to give a SPN error.
If I use IE within report builder and navigate to whatever report, click open, everything works, except, when I click on Dataset0 (the key one I normally need to edit), click query, it prompts me for a login and no matter which one I use, i get a popup that
says "unable to connect to data source 'AutoGen_123...'". If I click details I get "the targe principal name is incorrect. A connection was successfully established with the server, but then an error occurred during the login process. (provider:
SSL Provider 0-The target principal name is incorrect.)
Ben JohnsonWY

User is trying to acces t code S_ALR_87013611 Actual/Plan/Va Cost Center

User is trying to acces t code S_ALR_87013611 Actual/Plan/Variance and is getting the error message. There are no changes done to the user role.
The message comes as below :
The report 'Cost Centers: Actual/Plan/Variance' is incomplete
No authorization for 20 of 67 read records.
This type of messages are found in 2 or 3 users. A s per feedback recieved from project security team some user got this problem & later on they stopped getting these type of error .
The user also says that suddenly from last month they started getting this error for report S_ALR_87013611 .
If anyone has faced this issue please let me know the resolution .

Hi
Seems to be a pure authorization issue... Seems they have no auth for some Cost centers / cost elements
Go to SU53 when you get such error and you will come to know of the reason
br, Ajay M

Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian Collaert

Hello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT2729 How Can I Acces App Store Without A credit Card ?

I dont Have A Credit Card/Debit Card How Can I have Acces to iTunes App Store.

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...

HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected]

WMI acces

Similar Messages

Maybe you are looking for