WMS Picking Rule

How to set up picking rule when I want to pick only those lots where lot # matches with PO # on the sales order. I used this expression select cust_po_number from oe_order_headers_all oeh
where mln.lot_number =oeh.cust_po_number but it is not working all the time. I think I need to use sales order line or mtl system items tabel also in this join? If that's true do I need to use these table also in the rule somewhere else..

Hi,
We need to use customization with respect to your requirement as you cannot meet the whole requirement with seeded parameters available in Picking rules. Let me know your mail id so that i can farward you an document that is from oracle which suggests about the using the functions and packages in the picking rules.
Regards,
Sravan.

Similar Messages

  • WMS PICK Rule for WIP Comp Pick Release

    Hello,
    I want to use WMS Pick rule for picking only some parts using com pick release.
    Scenario: I have a FG item which has routing operations at 10,20 30 respt.
    During comp pick release I want to pick only those comp which are used at op seq 10.
    i.e Allocation should happen only for parts required at op seq 10, parts at other stations needs to be unallocated.
    Can I tried to define WMS Pick rule using WIP requirement and Operation Sequence in criteria but not able to allocate only parts at op seq 10.
    In WCB I can see all tasks.
    Pick Rule
                WIP Requirements  Operation Sequence Number >= Constant number 10
    AND    WIP Requirements  Operation Sequence Number < Constant number    20
    AND    WIP Job                 Status type                        =  Constant number       3
    Also in Rules Workbench this rule has been added and assigned to transaction source as Job/Schedule
    Please advise if I am missing anysetups.
    Regards,
    Tushar

    In Rules Workbench  transaction source needs to be inventory instead of Job/Schedule

  • WMS Picking Rule: Disallow picking from partially reserved LPN

    Hi ,
    We have a requirement where we want a discrete job to reserve materials only from those LPN where there is no prior allocation.
    for example:
    Discrete Job1 requires 8 quantities of component A.
    LPN001 has 10 quantity of item A.
    Job1 should reserve 8 quantity of item from LPN001. Subsequently no reservation should be allowed for 2 available quantity of item A from LPN001 till the discrete Job1 is completed.

    Hi,
    We need to use customization with respect to your requirement as you cannot meet the whole requirement with seeded parameters available in Picking rules. Let me know your mail id so that i can farward you an document that is from oracle which suggests about the using the functions and packages in the picking rules.
    Regards,
    Sravan.

  • How setup cycle counts with wms picking

    How setup cycle counts to dispatch tasks when make picking of an order with wms and activate an exception?

    Hi,
    We need to use customization with respect to your requirement as you cannot meet the whole requirement with seeded parameters available in Picking rules. Let me know your mail id so that i can farward you an document that is from oracle which suggests about the using the functions and packages in the picking rules.
    Regards,
    Sravan.

  • Mobile WMS Pick Load - Question in MWA application

    Hi ,
    I am not very much familiar with OAF, MWA technologies. I am given a requirement as detailed below. Please help me with the solution.
    In the page "Mobile WMS Pick Load" , there are some fields like Sub Inventory, Item, Req_Qty etc fields and all of them have a "Confirm" field for each of them.
    But there is a field called "Xfer LPN" but there is no "Confirm" field for that. My customer wants to have "Confirm" field for "Xfer LPN".
    So I tried to look at the field definitions and noticed that there is a field "MAIN.XFER_LPN_CONFIRM" field. So I checked the properties for this filed. Especially, the "Rendered" is set to True. But this fioeld is not seen on screen.
    So My question to you is :
    1) Is that teh correct fieeld that captures the "Confirmation" for the Xfer_LPN"? If so, why is it not displayed on the screen inspite of the "endered " is set to True?
    2) How can we meet this requirements?
    Please help me with this issue. Thanks
    Regards,
    ..

    Rather than directly answering to this question, we will first understand the requirement.
    Why we need a confirm field for Subinventory and locator etc.
    - Whenever you do picking, the pick rules suggest you the sub, loc etc on the mobile screen. Now the picker need to confirm the above details to say the system that he is ok with the suggestions that are shown on the mobile screen. In some cases, they may need to override the suggestions suggested by the system. To allow that, we are having one extra field to confirm all the details that got populated automatically.
    whereas in your case it is xferLPN field which is already an editable field. Except in few cases, this field won't get the value populated. User need to enter the details manually. If system suggests the value but the picker need to override, then we can do it on the same field. So there is no question of having one extra field to confirm the XferLPN.
    Thanks,
    Kamesh,
    Senior Consultant,
    Intelligroup

  • Picking rule

    Dear All,
    We are implementing WMS in a company which deals into trading of Food products.The picking strategy defined here is SLED.Now for supermarkets there requirement is Minimum remaining shelf life should be at least 6 months prior to expiry date This is ok for outside customers but for Stock transfer order they want that stuffs which are going to expire soon can be delivered can we acheive this in sap.Also if i can change the picking list by manual intervention is it possible to restrict that this can be authorised to a particular user or a group of user.
    Regards
    Bhushan Kumar

    Hi,
    You can define a pick rule with the below restriction
    Actual Transaction ---Transaction Primary Quantity = Expression (SQL statement)
    SQL should have the restriction for the transacted item = item present in this lot.
    Make sure that you have added this rule in a strategy and is in the first place in the rules work bench

  • How do I "Recompile your picking rules" after the latest INV/RCV RP 20?

    Hi,
    I am an apps DBA and we've patched up to the new support baseline (trial run) for extended support on 11i, and it includes INV/RCV rollup patch 20 (patch 1086420.1). One of the post-steps in the metalink for this patch (Note 1086420.1) is to "Recompile your picking rules". How do I do this? I'd need to be the "Manufacturing Super User GUI" -correct? Thanks in advance.

    Hi,
    It might be about running the program Generate All Rules in WMS. This a PL/SQL package which compiles all rules.
    Please check the option and let us know how it goes.
    Thanks,
    Karthik

  • Unable to create Picking Rule

    Hi Gurus,
    I am unable to create picking rule in N->Inv->Setup->Rules->Picking using this navigation.
    I have created rule and selected required parameters in the screen, click on save, getting message as "1 transaction completed, saved", If i query same name in Inventory picking rule form, unable to locate the same.
    Please let me know where I miss the setups, profile option for seeing created picking rules.
    Thanks
    AK

    Just Enable it in the header, goto tools and generate the corresponding package.
    If you are in R12+, then you will also need to associate it with an organization by clicking on assign button.
    Thanks,
    Hrishi

  • Inventory Picking Rules

    Hi
    This is in Oracle EBS 11i.
    We defined the inventory picking rule as Lot Control = None, Order Revision = Null, Subinventory = Null, Locator = Null.
    What is the default logic that Oracle picks up when allocating inventory to Pick Move Orders in this case? We checked multiple scenarios and it appeared random
    Next we defined a new inventory picking rule as Lot Control = Receipt Date, Order Revision = Null, Subinventory = Null, Locator = Null.
    We assigned this to the item but then when we allocated the inventory to Pick Move orders, the allocation did not change from the earlier case when the Lot Control was None.
    Any idea.
    Thanks

    Hi,
    You need to mentioned the pick rule name in the organization parameter fot the respective inventory organization.
    Responsibility: Inventory Superuser or similar
    Navigation: Setup -> Organizations -> Parameters
    ATP, Pick, Item-Sourcing tab.
    Enter the picking rule name in the Rule field in the Picking Defaults section.
    Thanks,
    PS.

  • WMS Putaway rules for inbound

    HI Apps Gurus,
    Please find the below requirment on WMS Putaway rules for inbound
    Allergens ( items with allerges eg. Milk, Egg etc attached to the item ) should be kept in locators on lower most shelves in the racks
    Raw materials and Packaging items are stored in specific racks
      Loose materials like flour are stored in Silos
    Please suggest a solution to achieve
    1.Using Item catergories to address different allergens
    2. In Custom SQL - what logic needs to be checked
    Thanks,
    Mahendra

    HI Everyone,
    Can anyone help me out on this.
    Regards,
    Sravan.

  • WMS - pick and sort

    Hi,
    I am new to Oracle WMS. Needed some pointers on how can I model a picking flow path as below
    1. Pallets in pallet storage have multiple standard casepack cartons. This area is accessible only in full pallets and cannot be handled in cases.
    2. Sales orders are in such quantities that multiple orders can be fulfilled from a single pallet. Assumption: Each sales order is for different customer, hence different delivery.
    3. Need to be able to create one pick task from pallet storage for picking a pallet to an intermediate location
    4. From this intermediate location need separate tasks for moving required number of cases from this pallet to final staging location.
    I have worked on other WMS, where this scenario can be easiliy modelled. I am confident that even in Oracle WMS, there should be some way out using the outbound operation plan and consolidation options. However, specific pointers would be highly appreciated.
    Regards,
    FMS
    Edited by: 784406 on Apr 30, 2011 1:07 PM
    Edited by: 784406 on Apr 30, 2011 1:08 PM

    Hi fms,
    I am using Oracle WMS to model my picking flow and am stuck at the same point as you. Were you able to meet your requirement in Oracle WMS? If so, can you share the details on how you achieved it?
    Thanks,
    Karthik

  • WMS Put_Away Rules

    Hello,
    From Oracle documents os WMS i have came across Put Away type of Rules,
    As per std definition of Put away rule from oracle documentation suggest - "Put away directs operators to put newly received material into the most appropriate location".
    So my que is is the Put Away rule is only limited to Receipts or can we use the same for other material allocation too ???
    Thanks,
    Kaustubha.

    Hi,
    Increase your chances by posting this question to wider audience:
    Logistics - EBS (MOSC)
    Regards,
    Ajith

  • WMS dropping rules execution time.

    Hi Community!
    We're facing problem in our OEBS 12.1.3 production environment with dropping rules execution time.
    Execution can take a long time (10-15 minutes) if it started from standart interface by warehouse worker, but from the other side same query executes in few seconds in sqlplus.
    I'll be very grateful if someone helps me to find problem source.
    Kind regards.

    Well, these rules are not unique – most of them are executed repeatedly for various Entities. In whole, it is a big budget calculation model.
    It surely can be and must be optimized, but it will take some time (I started to administrate this outsource-developed Planning system not long ago).
    But the question now is not in the amount of BRs, but in the execution delay.
    I tried to run a singe rule the same way, and got _18 sec in CmdLineLauncher vs 1 sec in EAS Console_.
    Just can't get the delay reason...

  • Is Subinventory Transfer Possible after Picking?

    We're currently preparing a Conference Room Pilot (CRP) 2 for an important client, a big Fast Moving Consumer Goods company. The client wants to use its Shipping Trucks as Subinventories under WMS-enabled Warehouses/Inventory Organisations. Goods are considered unsold and are still in Inventory when they are in Trucks. Goods are considered sold only when they are delivered by the salesmen/driver. The latter will issue an invoice through a mobile handheld during delivery.
    There are picking locators in the warehouse, and when sales orders are received, they are picked from the warehouse and then loaded into the lorry. According to Oracle WMS, if we use the Line Flow Generic workflow in Order Mgt, move orders will be automatically created (pick wave move orders) and these can only be transacted using Oracle Mobile Supply Chain Applications and WMS picking rules. Now, we know that when picking is done in WMS, the goods go to the default staging subinventory and then these are shipped to Trucks and considered sold (ship confirm). However considering the above issue, can we bypass the staging subinventory, and move it directly to Trucks (which are diff. sub inventories) and then from there shipping is done to client?

    For one customer we tried to avoid using staging at all. Customer didn't have staging step.
    So we made an experiment - new trigger on MTL_MATERIAL_TRANSACTIONS_TEMP was created. Trigger (in picking scenarios) replaced To_Subinventory and To_Locator.
    Finally this trigger was not used (we found another way). Also I can't confirm You that it's correct modification of OeBS. It's on Your risk.
    I think this can be used in Your situation.
    Best regards,
    Eugene

  • How to use Pick Release Rule  while doing pick relase from API.

    Hi All,
    I need to Pick Release the Order based on pick release rule through and API. I am using WSH_DELIVERY_PUB to do Pick release/confirm.
    I did not find any parameter in the API which allows to use Picking rules for Pick Release.
    Is there any way we can do the PICK RELEASE using Picking Rule through APIs.
    Any information on this will be appreciated.
    Thanks
    Sreenivasa Gurani.

    Hi Srini,
    You need to use WSH_PICK_LIST.RELEASE_BATCH API, this one has two parameters
    1. p_batch_id -- Get it from WSH_DELIVERY_DETAILS tables
    2. p_log_level -- Not requires
    Or
    By Using this API you create the Batch
    WSH_PICKING_BATCHES_PUB.CREATE_BATCH -- This API Returns Batch id
    use this batch_id for WSH_PICK_LIST.RELEASE_BATCH
    Thanks
    Reddy

Maybe you are looking for