Wmware workstation unity is causing painting issues in FF4

I'm using FF4 rc on windows xp. I am running linux on wmware workstation 7.1.3. When I switch to Unity mode, the browser will not repaint the screen unless I move it off screen and then move it back. Unity mode is where apps running on my my linux desktop can show intermixed with my windows apps. I'm using Nvidia quadro 290 with dual monitors, with latest drivers. If I close my browser, and then switch off Unity mode, I can then start my FF browser and it displays as expected.

ELM just syncs what licenses are required based on configured features for each product, you would need to remove any speechview configuration you have in CUC to make that happen.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

TouchPad Vertical-Scroll Painting Issues

I have yet to reproduce the problem myself but I am getting
reports of a painting issue on some laptops. Apparently, using the
touch pad vertical scroll option on some (not mine unfortunately)
laptops causes the contents of the flash player to paint outside of
the player boundaries. The code is written in AS3 and is targeted
for the Flash 9 player.
The code implements a very basic FLVPlayback (skin on top)
that sits behind a button and a static image in layers on the stage
until the button is clicked. When clicked, the static image and
button have their visible property set to false and the video is
played. The painting problem happens when the static image is
displayed and when the video is playing.
Since I’m having no luck finding complaints of this
problem after much searching, I can only assume that I have done
something wrong in my implementation and being new to Flash it is
the most likely scenario. Any suggestions on what I could be doing
wrong?

I got better response on my w520 by installing "Two finger Scroll" from here:
https://code.google.com/p/two-finger-scroll/
A LifeHacker post that turned up about the software:
http://lifehacker.com/5493849/get-mac+like-scrolling-and-gestures-on-a-windows-laptop
...and it's helpful on my machine. For example, I often increase the size of font display in web text-heavy articles with CTRL-(two fingers up). I have no idea of its effect on a w530 but pull a Restore Point first and try it. Bail if bogus on that model.
Pretty lame help from the techs.
BTW, you can search here with that sw name because I heard about it in this forum and if there are negatives they woud have been discussed back in late 2011, early 2012 when I was looking into this. Good luck.
4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

Error message is not telling which field causing the issue!

Hello
I am developing the Adobe Interactive Form and launching this form from WebDynPro ABAP application, fine.
This form has tonns of dropdown fields, mandatory fields, greyed out fields. Fine.
I am filling the list the drop-down fields from webdynpro ABAP, but, i am filling list for only 80% of the drop-down fields, rest 20 % is not filling at all (bcz, business want to have those 20% dropd-owns on the form by thinking going further they require, this moment they dont need so they dont want to fill the lists)
Now the form is launching on the browser, fine. But when user submits it i am getting the below erro:
The Entered Value Is Not on the List of Valid Values. (I am guessing this error is talking about the DROPDOWN fields only)
I hv tonns of drop-down fields, so, its very difficult for me to go and trace each and every drop-down fielld!! But, i checked all the populated/entered values in the drop-down fields, they are all fine. Sone dropd-down fields are GREYED OUT, they are defaulted from webdynpro ABAP
Pls. let me know How can know which field/drop-down is causing this issue? Wht are the possible causes for this error? Error is not telling which fields is making issue?
How can i trace and how can i fix it, pls. let me know
Thank you

Thank you for your tips.
But, as of my knowledge every thing (case sensitive, list box entries) are fine, not sure, why am getting this error! I will double chk again.
But, thing is.... actually, i have 4 pages, depending on the logged in user, i will HIDE the pages (say, for me the 3 rd page will be hidden), i am hiding the pages by using JavaScript in the form.
So, this error is not coming if i execute/launch all the 4 pages, but, its coming if i hide any page for any user!!
By chance, do we debug to figure out which FIELD is CAUSING issue/this error?
From where this message is coming, i mean, from the SAP's JAVA stack? Wht is the message ID and #?
or is it Adobe's/Form's error?
Thank you

Unity Connection Voice Mail Issue

Hi,
I have a weird Unity Connection Voice Mail issue and would appriciate any help i can get. Many thanks in advance.
I have Unity connection 7.0 and CUCM 7.0 integrated in a lab enviroment and here is what happens.
When I place a call internally say from 2001 to 2002, things work as expected, 2002 rings and it goes to voicemail where I can leave voicemail and listen to it from 2002.
However, if I place call from the PSTN to the same number 2002 (or any other number in other sites etc) the call again rings in 2002 and goes to voicemail, unity cnx plays the greetings for 2002 and says record your message as usual. Everything up to point is fine, then when the time on the PSTN phone is showing around 14 seconds into the call unity starts playing, "to send this message press one", if I press one nothing happens.
I have rebuilt unity and cucm, even just configured the bare minimum in the lab and still getting the same result. I tried calling from E1 connection and T1 connection but with the same results.
I have run out of ideas...
===============================
Here is a call trace from an internal call:
CallData, 1, CallerId=2003, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=8B7859FD6C16417A9A07F507418DD25B, CallerName=, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 2003, AttemptForward
State, 1, 2003, State - AttemptForward.cde!Dummy
State, 1, 2003, Event is [NULL]
Application, 1, 2003, PHTransfer
State, 1, 2003, State - PHTransfer.cde!LoadInfo
State, 1, 2003, Event is [TrueEvent]
Application, 1, 2003, PHGreeting
State, 1, 2003, State - PHGreeting.cde!PlayGreeting
Display, 1, 2003, Call answered if needed
Display, 1, 2003, Playing greeting for Subscriber: hq2
Display, 1, 2003, No DTMF received
Display, 1, 2003, Playing greeting for Subscriber: hq2
State, 1, 2003, Event is [RecordMsgEvent]
State, 1, 2003, State - PHGreeting.cde!RecordMsg
State, 1, 2003, Event is [NULL]
State, 1, 2003, State - PHGreeting.cde!RunEditMsg
Application, 1, 2003, -->MessageEditing
State, 1, 2003, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 2003, Event is [EditMessageMenuEvent]
State, 1, 2003, State - MessageEditing.cde!PlayEditMenu
State, 1, 2003, Event is [HangupEvent]
State, 1, 2003, State - MessageEditing.cde!CheckMsgLength
State, 1, 2003, Event is [ManyEvent]
State, 1, 2003, State - MessageEditing.cde!SendMsg
State, 1, 2003, Event is [TrueEvent]
State, 1, 2003, State - MessageEditing.cde!ConfirmSend
State, 1, 2003, Event is [HangupEvent]
Application, 1, 2003, <--MessageEditing
State, 1, 2003, Event is [HangupEvent]
Display, 1, 2003, Idle
Display, 1, , Dialing (MWI) '2002'
Display, 1, , Idle
and here is a trace from an external (PSTN) call
Trying 142.100.64.13, 5000 ... Open
CallData, 1, CallerId=911, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=CA3DFD90846C4FE7B0D68298A7698287, CallerName=PSTN Emergency, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 911, AttemptForward
State, 1, 911, State - AttemptForward.cde!Dummy
State, 1, 911, Event is [NULL]
Application, 1, 911, PHTransfer
State, 1, 911, State - PHTransfer.cde!LoadInfo
State, 1, 911, Event is [TrueEvent]
Application, 1, 911, PHGreeting
State, 1, 911, State - PHGreeting.cde!PlayGreeting
Display, 1, 911, Call answered if needed
Display, 1, 911, Playing greeting for Subscriber: hq2
Display, 1, 911, No DTMF received
Display, 1, 911, Playing greeting for Subscriber: hq2
State, 1, 911, Event is [RecordMsgEvent]
State, 1, 911, State - PHGreeting.cde!RecordMsg
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!RunEditMsg
Application, 1, 911, -->MessageEditing
State, 1, 911, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 911, Event is [EditMessageMenuEvent]
State, 1, 911, State - MessageEditing.cde!PlayEditMenu
State, 1, 911, Event is [HangupEvent]
State, 1, 911, State - MessageEditing.cde!CheckMsgLength
State, 1, 911, Event is [NULL]
Application, 1, 911, <--MessageEditing
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!AfterMsg
State, 1, 911, Event is [NULL]
Display, 1, 911, Idle

Sounds like one way audio from PSTN to your Unity Connection, couple of things to check:
1. ensure your protocols are bound properly on the GW, i.e. SIP/H323/MGCP
2. Make sure IP routing is OK between Unity and the voice gateway
HTH,
Chris

My macbook pro keeps freezing and shutting off when I am browsing the web on Safari. How can I figure out what is causing this issue?

For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Could the replacement of a fan on a graphics card cause OS issues?

[Dangit - I unintentionally posted this in the iMac forum first - meant to post it here]
OK I suppose it's a bonafide long shot that my replacing of an intermittently malfunctioning fan on a graphics card could cause OS issues, but I've had something immediately crop up after the replacement (crippling issues with Logic's 32-bit audio unit bridge), and they effect older projects that were previously stable, so I figured I'd ask for the heckuvit.
Repairing permissions hasn't helped - I'm just starting to ponder whether to reset PRAM, reset SMC, boot from an HD clone, try reinstalling the old fan, etc., in order to figure out the problem....
BTW - the graphics card is an Nvidia GT120.

Go out and buy an Apple ATI 5770.
What requirements does Logic have for video, and are you still on 10.6.8?
The GT120 is 512MB but low-end card.
If you do need more performance:
SHOOTOUT WITH THE 'SHARKS': Sapphire Radeon HD 7950 for Mac versus really fast alternate GPUs

Could simply replacing a fan on a graphics card cause OS issues?

OK I suppose it's a bonafide long shot that my replacing of an intermittently malfunctioning fan on a graphics card could cause OS issues, but I've had something immediately crop up after the replacement (crippling issues with Logic's 32-bit audio uinit bridge), and they effect older projects that were previously stable, so I figured I'd ask for the heckuvit.
Repairing permissions hasn't helped - I'm just starting to ponder whether to reset PRAM, reset SMC, boot from an HD clone, try reinstalling the old fan, etc., in order to figure out the problem....
BTW - the graphics card is an Nvidia GT120.

Go out and buy an Apple ATI 5770.
What requirements does Logic have for video, and are you still on 10.6.8?
The GT120 is 512MB but low-end card.
If you do need more performance:
SHOOTOUT WITH THE 'SHARKS': Sapphire Radeon HD 7950 for Mac versus really fast alternate GPUs

CS 5.5 coexist with CS 6.0 causes FrameMaker issue - can't import SVG file!

Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
Thanks in advance for your help!

Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
Thanks in advance for your help!

Two Fx 4 windows open at the same time causes usability issues

When I load two instances of Firefox, I get multiple issues with the second instance usability, display, and hot keys.
The issues are as follows:
# Menubar/Toolbar appear differently
# Back/Forward buttons do not work
# F-Keys no longer Function
# Favicons show old, cached icons
Please see screen grab of my two monitors with two instances of Fx 4 open, but the I played with my toolbar settings to get it to look somewhat ok.
http://www.travellingwebguy.com/images/Fx-4.png
This is what happens when I open a second window, and do not mess with the toolbars:
http://www.travellingwebguy.com/images/Fx-4-2nd-window.png
This issue was not happening with Fx 3.x.x.
I am using a custom Persona, but I have changed the Persona a few times and I still get the same result.
I've removed all incompatible extensions and upgraded all the ones that needed upgrading.
Not sure what the issue is here, but would love to troubleshoot it down if possible. Please let me know if any other info is required!
Cheers
Tim

Exact same issue here. Also, the add-on manger will not launch.
I thought it might be an add-on causing these issues, but only one out of my ten or so addons work in FF4, and I disabled it with no success.
This is a huge issue for me. I attempted to uninstall FF4 and go back to FF3 but I can't find an install file for FF3.

XFi-2- Latest firmware (1.20.08) has caused some issues on 32GB model...

HXFi-2- Latest firmware (.20.08) has caused some issues on 32GB model... When I started my PC last night, it notified me that new firmware was avaliable so it downloaded it and installed it on my Xfi-2 32GB
According to the release notes, it was to add support for the 64 GB model as well as some general improvements.
I can't determine what the latest improvements were (anyone have any clues ) and the UI seems the same.....the only things that have changed are that my applications no longer work (when I go into the applications shortcut, it says there is no valid content: I haven't touched these folders etc and they are still populated with the three standard apps as far as I can tell)
The other thing (which may not be related to the firmware upgrade) is that my photos shortcut now pulls up some of my music folders that contain album art. Is this a feature or a bug (I don't want it to happen, I just want it to show photos within the 'photos' folder on the device).... I think it may have been caused by me simply dragging and dropping music folders onto the device using windows explorer rather than going through Centrale (slow!)
Cheers

Hi Timmo.
What release notes are you reading? I have seen no reference to improvements other than adding support for the new 64 GB model on this firmware version. From the description of the problems you have, it seems that your player has some sort of file system corruption on the internal flash. I would suggest reinstalling the firmware on your device after formatting it (formatting the device only should be enough, I think).
The size of the new firmware release, double than the size on the previous one, means that it probably has new features and applications that will be enabled on the future; however I doubt it means it has new features right now and hope it does not means we have two firmwares (on for the 64 GB model and other for the previous ones) as the SRM/AlphaBIOS pair on the Digital Alpha systems (an ugly hack on these superb computers, in my humble opinion) -- by the way, the new firmware does not require more space on the internal flash (I have 5077 MB available on mine with all firmware releases).
The behavior you describe about album art being shown on the photos shortcut happens with older firmware releases too; I prefer album art embedded on the audio files instead of being available as another file. I agree with you, only pictures under the photos directory should be shown as images.
Cheers.

How do we change itune and icloud accounts? My wife and I have seperate accounts but she cannot access hes, only mine. This causes many issues like facetime, text etc. Do we have to reset her devices and start fresh?

How do we change itune and icloud accounts? My wife and I have separate accounts but she cannot access hes, only mine. This causes many issues like face time, text etc. Do we have to reset her devices and start fresh?

I think this may be the answer.
http://support.apple.com/kb/HT5621

Ea6300 causing network issues when connecting to web browser on my Mac

I have had my ea6300 for two months and its causing major issues when connecting to my web broweser before I throw it out the window can someone give me some help.

Hi bigtimer30, what do you mean by “it’s causing major issues when connecting to my web browser”? Do you mean that the MAC computer is no longer able to access the internet? If yes, is it with both wired and wireless connections? Is this happening to all of your devices? Or just that specific MAC computer? If all the other devices are still able to connect except the MAC, I suggest that you do a power cycle on the computer (if you haven’t done it yet). And you’re having difficulties with the wireless part, try to hard wire the computer straight to your router, and check if you experience the same thing. If the wired connection is okay, you may try playing with the router’s wireless channel. Better if you could give more details for us to give you more suggestions.

HT4009 I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

Have you tried contacting iTunes Support and asking them ? We are fellow users here on these forums, it could be due to a number of reasons, we won't know which one.
http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Painting issue with swing titlebar

Hi,
I had already posted this but no body replied so I am posting it again hoping somebody might reply to this now.
In my swing application I wanted a custom titlebar, so I created my own RootPaneUI by taking most of the code from MetalRootPaneUI to get what I wanted.
In order to make my titlebar visible I had to call:
frame.setUndecorated(true);
frame.getRootPane().setWindowDecorationStyle(JRootPane.FRAME);
The major issue I am facing now which sounds very weird to me is with the painting of the window. When I start the application sometimes (not always), I see the frame being stuck to the top left corner of the monitor, when I move the mouse over the toolbar/menubar, the frame starts painting the icons of underlying IDE like eclipse or IntelliJ over my application. It seems like a painting issue which is really a very strange behaviour.
This issue does not happen with windowslookandfeel and also works fine for MetalLookAndFeel when the JFrame is decorated to show window decorations(windows titlebar) not the look and feel one(custom titlebar).
I wanted to know if its me who is doing something wrong or is it a swing bug. Is there a way to fix this issue. I searched a number of forums but couldn't find an answer to it.
Thanks in advance.

Hello @Andre_Uhres:
In my application, I am using swing application framework (JSR 296) and I have a splash screen(JFrame) which loads some configuration data and then shows a modal login dialog on top of it. On successful login the login dialog and splash is disposed and the main application frame shows up.
The job of showing splash screen and logging in the application was being done in the main/initial thread. I apolgoize for not being able to provide a sample runnable code because the issue is seen only with my application and not with any other demo programs and it was not quite possible for me to put that huge code here.
public static void main(String args[])
SplashFrame.start();
//Launch the main application
Application.launch(ApplicationMain.class); // swing application framework would launch the frame in the invokeLater method.
class SplashFrame
   public void start()
        // create a splash and show it
       // load the configurations
       // show login dialog
       // on successful login dispose splash and login
}I eventually moved this code into SwingUtilities.invokeLater() but even this didn't help me. I still see the same issue.
public static void main(String args[])
// or use invokeAndWait
SwingUtilities.invokeLater(new Runnable(){
SplashFrame.start();
//Launch the main application
Application.launch(ApplicationMain.class); // swing application framework would launch the frame in the invokeLater method.
}I also tried doing this:
RepaintManager.setCurrentManager(new RepaintManager()); as I read in some forums that sometimes RepaintManager might need to be overwritten to resolve some painting issues.
FYI: I am using JDK 1.6.0_17
In spite all these, I still see the same issue. Any help much appreciated.
Thanks

New Apple ID email has caused sync issues between iPad and iPhone

I changed the email of my Apple ID and made sure to save photos and delete old iCloud backups. The calendar noon get syncs but instead eats any new events. Photos from my iPad appear on my iphone but it doesn't work the other way around. Instead my iPad still has an iCloud photo album from my previous Apple ID email. I've made sure that my email is updated on both devices and that everything syncs to iCloud and has been recently backed up. I even deleted the new backups and did it again. I turned off photo steam and turned it back on. Any help would be greatly appreciated. One more detail, even in iTunes, I do not have photo albums being synced from my computer. I just have photo stream with iCloud.

I'm not sure what caused the issues but backing everything up and restoring both devices has fixed photo stream as well as notes/calendar icloud issues. It even syncs to my computer again! The icloud photo album from the old apple id email is also gone.

Wmware workstation unity is causing painting issues in FF4

Similar Messages

Maybe you are looking for