Won't save file on my server.

When I save a file, I get the message: C:\Windows/System32/index.html. ou don't have permission to save in this location. Contact the administration to obtain permission" It then tells me to save in my documents and not to the server.
I do other websites and it's only this one I am having trouble with. Is there a setting I messed up someplace???

Wrong forum. This is for Expression Design--a graphics program.

Similar Messages

Path does not exit - While trying to save file on SharPoint Server 2013 from client machine

Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
Ali

Hi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

Numbers 3.0 won't save files!

Numbers 3.0 suddenly won't save files on my Macbook Pro.
I opened a .csv file, made some changes in Numbers, and tried to Save to my desktop. I get a window that says "The file '[filename].numbers' couldn't be opened".
I tried to Export to a .xls file, and also Share>Send a Copy>Email and chose Excel as the option. Same message about not being able to open the file.
This makes Numbers totally unusable for me. And for some reason, the old version of Numbers is suddly gone, so no fallback there anymore.
Any tips?

And for some reason, the old version of Numbers is suddly gone, so no fallback there anymore.
Hi Oslo,
Numbers 3 exports to Excel fine on my machine, though it uses the extension .xlsx not .xls.
Same with Share>Send a Copy>Email. Works fine.
So maybe you should try closing Numbers 3 and reopening it, or restarting your Mac.
Your old version of Numbers should still be on your Mac, in a subfolder within Applications named iWork '09 or similar.
SG

InDesign CC for Mac won't save file

I've been using InDesign CC and working on a document for over a month. Been saving it in Creative Cloud. Have had no problem opening it, making changes and then saving it. Today I opened, made changes and the file will not save. I've tried saving it down and opening in Indesign 6 and it still won't save. I also cleared InDesign preferences and reinstalled InDesign. Still won't save when I open it up. The strange part is I'm able to open on another computer through Creative Cloud and am able to work on it and save back to Creative Cloud. No matter what I do I can't open and then save on the original computer.

Finally discovered the problem. It was a PDF of an ad I received from an agency. Once I took it out of the document I was able to save as usual. Thanks for your help!

After AW 6.0 update to 6.2.9 won't Save files

After updating Apple Works 6.0 to 6.2.9, the updated program will not allow me to save any files. After choosing my Macintosh HD as the "save to" location, I am unable to Save. Instead, a small wndow appears stating "Cannot find volume." I had previously been running AW 6.2.9 for a long time, but had to reformat my HD recently and re-loaded AW 6.0, then tried my 6.2.9 update when this problem surfaced. I tried UNINSTALLING these and re-installing several times, but I always have the same problem now. I also have to force quit AW most of the time. However, the OS9 version runs fine and saves fine, no problems with it. Help!!

Thanks Peggy for your prompt suggestions. I went ahead and used Disk Warrier to rebuild my HD. I also used Disk Utility to repair Permissions. I also trashed preferences from AW for both systems 9 and 10. Same problems! I re-installed AW from the beginning. Same problems! I also find I cannot open any of my AW files directely- a dialog says "file is locked or in use" and "open a copy." When I open a copy, it still won't Save! I went to Get Info- all my AW files have "read only" and the owner is "unknown." I clicked the locked padlock on unknown, unlocked it, reset it to my normal owner name for the computer, changed the file to "read and write" and clicked "open all files with this application" also. It will the open that one file without asking me to open a copy. But still won't Save. And all my other AW files are still set to "unknown" and are still padlocked in the "read only" mode. What the heck do you think happened here? This was after I had the Apple Store help me to reformat a copy of my HD because it had frozen one day and couldn't be retrieved with Disk Utility or Disk Warrier. They couldn't tell me why this had happened. All of my other applications are just fine. Any help would be GREATLY appreciated! Mark Schubert, Phoenix, AZ

InDesign CC Won't Save File

Running InDesign 9.1
Mac 10.8.5
I have been using InDesign CC just fine with no issues. I have one file that I have edited for at least a couple of months and have had no issues. All of a suddent today, it won't save. It has all the options to save, but never will actually save. A co-worker can open and save it with no issue, but now I can't. Any thoughts?

It's a known issue that you can have problems saving an InDesign file if you've dragged and dropped from the Finder or from Adobe Bridge. It's expected that there will be an update to fix this and other performance issues before too long.
In the meantime, using File > Place instead of drag-and-drop.

Cannot save files to Windows server 2003 file server from MAC

Hi,
We have few MAC users and others mostly windows based users. Problem now is MAC users cannot save any files to the file server. I had the issues to save in the portable hard drive then i format the HDD to fat 32 and now i can save, But the file server cannot
be done like that.
What i can do to save the files to file server? please advice me
thanks
saththiyan

I cannot attach another NAS as CEO need to save files to all the folders which is there in the file server already,
You can share the folder and map a drive across the network to access the shared folder on the file server. Shared folders formatted NTFS do not affect network access. You would do that by using the SMB. Here's how:
How to Map Network Drive in Mac OS X
http://www.technipages.com/how-to-map-network-drive-in-mac-os-x.html
What OS version is the server? Is it a DC? You may need to reduce security on the server to allow Macs to access the server. Here's more info:
How to Disable SMB 2.0 on Windows Vista/2008/2008 R2
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
"To disable SMB ... Otherwise, disable SMB signing on Windows Server 2003 domain controllers.
http://support.microsoft.com/kb/325379
How to enable Windows 98/ME/NT and MAC clients to logon to Windows 2003 based Domains
http://support.microsoft.com/default.aspx/kb/555038
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

Word 2007 won't save files with Acrobat Pro 9.0 Installed

Last night an issue started occurring while trying to save a document in MS Word 2007 (part of an Office Ultimate install). After about 10 hours of trying several suggestions from a variety of forums and MS suggestions I found that the only time I cannot save a file by traditional means is when Acrobat is installed. I tried updating Acrobate and had the same thing happen. MS says all that's left for me to do is get an answer from Adobe (I have to wonder if it's a copout).
Steps taken so far:
Disabled the PDF add-in - still unable to save Word files
Removed PDF add-in - still unable to save Word files
Removed entire CS4 suite - Word was able to properly save files
Installed only the parts of the suite that I use frequently (Photoshop, Soundbooth, Premiere, Acrobat) - unable to save Word files
Removed Acrobat Pro 9.0 - Word saves files properly again
When I say it will not save a file I've tried the keyboard shortcuts for Save/Save As, Choosing the Save/Save As from drop down, and even attempted to save by closing the document. When prompted with the option to save changes I say yes and nothing will happen, I have to close the document with nothing saved.
I hate the idea of reinstalling Acrobat each time I need to use it to keep Word functional. I've seen a ton of threads on other forums related to this issue. Has anybody else seen this or know about a fix/work around? Any help is appreciated. Please let me know if additional detail is necessary.
The operating system for the affected computer is Windows 7 32-bit.

I installed each update individually (6 of them) and rebooted after each update. Opened Word and attempted to save a document (after each update/reboot), the documents still cannot be saved (previously created documents still cannot have new detail saved).
Decided to delete the Office folder in the following path: C:\Program Files\Adobe\Acrobat 9.0\PDFMaker\Office
Opened up word and Acrobat went through an installation processes, to replace what was removed I assume. After this was done I attempted to save a document and was still unable to do so. Went back and deleted that Office folder in the above path again. When opening Word this time I cancelled the installation process that Adobe was trying to complete. Preventing the install of the settings and PDF add-in allowed documents to be saved again in word.
I decided to try to remove the innactive add-in from my Word Options and received the following error message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed"
Due to my deleting that folder?
I suppose I could cancel that installation that initiates each time I open Word (or any other Office program that benefits from Acrobat Add-ins) but that will be a bit of an annoyance.
Anybody have another suggestion, know what may need to be deleted from the registry to prevent the Add-ins installation when opening Word, or know where that setting can be changed?
Hopefully getting close to a resolution

ACR won't save files other than in original file folder.

This has just started. All was fine until now. I recently was working on several files in camera raw. Went to save files but discovered that I am unable to save the image, no matter what file format I choose -- TIFF, PSD or JPG -- unless I put it in the original folder it came from. For example, I would choose Save Image from ACR, then Save in New Location, then Select Folder, choose another file folder (say Desktop) and then it would try to save it but would tell me the file could not be created. If I choose Save in Same Location, everything works fine. I AM able to open the RAW file in Photoshop and Save it from there. As I said this is happening all of a sudden. I am working with Vista 64 bit and with Photoshop 64 bit. I tried using the 32 bit program but the same thing happens. Any suggestions or should I just completely uninstall and reinstall? I have checked and have all the latest updates for both Photoshop and ACR. Thanks.

Hi Gingerdee1,
Yes strange ....
-Do you have the right privelige to save at an other location..... >>privelige-user .... or..... >>folder-protection (read-only)... >> or network privelige changed
-Is that disc full maybe at that location....
-Do you try to save a file with illegal characters in the file name...
-Working with other RAW-files.............
-Did you change any other situation....than before...
Regards Fred K

LT won't save files

I recently had to re-install FCP 4.5, and now LT 1.2 will not save files. I open a previous file, re-type, click "save as" and nothing happens. I am using OS 10.4.11 on a Mac Pro (intel chip).
"open" function doesn't work either.
Thank you.
Message was edited by: Mark Barroso

Re-installed LT and it still doesn't work. I downloaded the Pro App 4.0.2 software and installed it but when I check the software profile it says "ProKit 2" and ProKit 4.5 (Leopard)". I'm running Tiger, so should I delete the one for Leopard? Will this matter?
Can I install LT 2.0 as a standalone application to work with FCP 4.5, QT 7.2 and Tiger?
Any and all ideas on why I can't save files are appreciated.
Message was edited by: Mark Barroso

Can't write/save files to Lion server after upgrading to Yosemite

So I updated my "home" computer to Yosemite, I always test new OS on this computer for issues first as to not affect the all important "work" computer. Only issue I can find is I can't save/write files to my mac server running 10.7.5 (lion). It seems I have dissappeared from permissions. I can't add me back in because my mac on 10.10 states I don't have permission to do that (mind you I am admin on everything). I go to my work computer that is still on Mavericks and everything is fine, I can write to the server with no issues.
Any ideas on where I should look to fix a setting that seems to have gone awry? It was late last night and I was getting tired of figuring out what to fix.
I do see "me" for that "home" computer on the server....just not showing on the "home" computer itself.
Than

By looking at your post i have several questions to ask :
Where are the temporary files stored ?
Which data sharing scheme are you using for them ? AFP with POSIX or ACL behaviors, something Indesign uses ?
Which versions of indesign are you using ? Some differences exists in between PPC installs and Universal install and may play havoc with that.
There might as well be the question of ownership and rights that may differ as mentionned above in between your G5 workgroup and the MacPro.

Keynote won't save file

Everything has been working great with Keynote until last night when the program would not allow me to save my file.
It actually shows up in the finder when I save as a new name, however it won't open and says the file is corrupt.
Powerbook G4 15 Titanium DVI Mac OS X (10.4.7)

Were those red-green backgrounds a result of the crash? (Sorry very rude of me teacher, lol)
My immediate suggestion, especially if you are on a deadline is to carve the file up into a few new files. Make new blank files, assign your 'custom' theme and then drag in 1/3 of the slides from the original file. If presenting one file can link to the next with a hyperlink. If generating a DVD just make a few chapters from your few files. That's if this is an overload on system resources or Keynote's internal memory buffering from number of images. 125 slides is not a big deal, and neither is 350MB of media.
There's a ten myths of Mac problems list somewhere and repairing permissions is on it.
If trying to isolate a problem image there's an old process where you halve your test items (I used to do this with fonts but in your case it's slides or images) test both halves. Find the problem half that causes the crash and then halve it again. Repeat until you get to the problem file(s).
Good luck for Monday.

How to save files on the server?

I want to save a log on the server, how can I do this using Oracle?
In SQL Server I used the "bcp" command.
Thanks.

as forbrich suggested you can use the UTL_FILE built-in package. here is an example code to read and write to a file.
CREATE OR REPLACE PROCEDURE Read_Write_File (pvInFile Varchar2,
                                             pOutFile Varchar2) IS
vInFile   utl_file.file_type;
vOutFile utl_file.file_type;
vNewLine VARCHAR2(4000);
x         PLS_INTEGER;
vFlag BOOLEAN := TRUE;
BEGIN
-- assuming Your_Directory is $HOME/myTxtFiles in a Unix Platform
-- to check if definition is existing Select Directory_Name, Directory_Path From All_Directories;
vInFile := utl_file.fopen('Your_Directory',pInFile,'r');
vOutFile := utl_file.fopen('Your_Directory',pOutFile, 'w');
IF utl_file.is_open(vInFile) THEN
    LOOP
      BEGIN
        utl_file.get_line(vInFile, vNewLine);
        x := utl_file.fgetpos(vInFile);
        dbms_output.put_line(TO_CHAR(x));
        utl_file.put_line(vOutFile, vNewLine, FALSE);
        utl_file.fflush(vOutFile);
        IF vFlag = TRUE THEN
          utl_file.fseek(vInFile, NULL, -30);
          vFlag := FALSE;
        END IF;
      EXCEPTION
        WHEN NO_DATA_FOUND THEN
          EXIT;
      END;
    END LOOP;
    COMMIT;
END IF;
utl_file.fclose(vInFile);
utl_file.fclose(vOutFile);
EXCEPTION
WHEN others THEN
    RAISE_APPLICATION_ERROR (-20099, 'Unknown UTL_FILE Error');
END;
/

Photoshop CS2 won't save files in JPEG format

I have Windows Vista and am using Photoshop CS2 Version 9.
Until today everything was working fine, but there are two problems.
1. Only today I have a limited amount of formats to save a .PSD file in:
PSD, CIN, PDF, RAW, PNG, and TIFF.
Whereas if I want to save a JPEG file per say as another format, I get the full list to choose from.
2. If I choose a layer on an image, not all the filters show up that I can run it through. The 'Artistic, Brush Strokes, Pixelate, Sketch, and Stylize' are not clickable.
Thank you.

You slipped into 16 bit mode. Try going back to 8 bit.

Won't save file on my server.

Similar Messages

Maybe you are looking for