Word 2007 AddIn Cannot Run on Windows XP SP3 + Office 2007

Hi All,
I faced an issue regarding our Word 2007 AddIn cannot run on Office 2007 + WinXP SP3.
I developed a Word 2007 AddIn using VS 2010. The addin works fine on Win7 + Office 2007. But It cannot run in Word 2007 in WinXP.
I have tried the following testing.
1. I rebuild a new WinXP environment + Office 2007 + VS 2010. No antivirus in my machine. I create the Word 2007 AddIn using VS 2010. But unfortunately, it cannot run in my WinXP machine. it's very strange.
2. I rebuild a new Win7 environment + Office 2007 + VS 2010. No antivirus in my machine, and the same steps with previous. it runs fine.
3. I noticed that, if I debug the Word AddIn Project using VS 2010 In XP, it cannot run into debug mode. I checked the Word Options
I have highlight the test addins it always uncheck. If I checked it, when I reopen Word. it will change to uncheck status.
And the addins always in Inactive Application Addin group.
@All guys, How to solve this issue? It's very very strange.
Thanks a lot for your help.
Regards,

Hello Ricky,
First of all, I'd suggest checking the Trust Center settings in Outlook. Then take a look at the Disabled Items list. Is your add-in listed there?
Microsoft Office applications can disable add-ins that behave unexpectedly. If an application does not load your add-in when you try to debug it, the application might have hard disabled or soft disabled your add-in.
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event
handler in your add-in is executing.
Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application might soft disable an add-in if it throws an unhandled exception while the Startup event
handler is executing.
When you re-enable a soft-disabled add-in, the application immediately attempts to load the add-in. If the problem that initially caused the application to soft disable the add-in has not been fixed, the application will soft disable the add-in
again.
You can read more about that in the
How to: Re-enable an Add-in That Has Been Disabled article in MSDN.

Similar Messages

I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.

I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.

What is "Adobe XI" - Reader, or Acrobat?
But either way, 'Save as Adobe PDF' is a Word function, independent of what Adobe software you have installed.

Cannot run command window

In Windows I would expect to call up a seperate command window with the following, but it appears to freeze up. What am I doing wrong?
import java.io.*;
public class command {
public static void main(String[]args) {
    try {
      Process runprogram = Runtime.getRuntime().exec("C:\\windows\\system32\\cmd.exe");
      try {
        runprogram.waitFor();
      catch(InterruptedException e){}
    catch(IOException e) {
      System.err.println("Cannot run command window");
}

What about this...
    Process proc = null;
    try
      proc = Runtime.getRuntime().exec("start cmd");
      proc.waitFor();
    catch(Exception e)
      e.printStackTrace();
    }Some dukies would be nice next time ;-)

Do you know if it's possible to generate Word 2003 files from RoboHelp if we're using Office 2007 and RoboHelp 2007?

Do you know if it's possible to generate Word 2003 files from
RoboHelp if we're using Office 2007 and RoboHelp 2007? We are
thinking of upgrading, but have customers that would still require
Word 2003 formats because they won't have 2007 installed.
Thanks!

Hi NewtoRobohelp
Unfortunately I don't have Office 2007 in front of me to test
with. But I'm thinking that as long as Office 2007 still produces
the same formats as 2003, you could do it this way.
From RoboHelp 7 and using Office 2007, generate Printed
ouptut. Open said printed output in Office 2007 and perform a Save
As. Save the document as a RTF (Rich Text Format) document.
RTF is more universal. So I'm thinking this may be a possible
way around it. There is also the possibility that Word 2007 offers
up an ability when saving a file to save in an older format.
Cheers... Rick

What is the newest version of Adobe Acrobat Standard that runs on Windows XP SP3? I currently have Adobe Acrobat Standard 6.0.0. Thanks!

What is the newest version of Adobe Acrobat Standard that runs on Windows XP SP3? I currently have Adobe Acrobat Standard 6.0.0. Thanks!

The current updates 10.1.13 and 11.0.10 no longer support Windows XP SP3. The last versions to test were 10.1.10 and 11.0.3 I think. But I wouldn't recommend using those because of the Security Updates in between those versions and the current updates. Microsoft doesn't even support Windows XP SP3 any longer. I would say to try updating both the OS and the applications.

MS Word not listed in Acrobat 9 supported file type (Windows 7 64 + Office 2007)

Installation details:
Windows 7 64bit O/S
MS Office 2007
Acrobat 9 Professional
When attempting to create a PDF from multiple files or combine multiple files into one PDF (single or package/portfollio) Microsoft Word is not listed in the supported file type drop down menu. This means when I navigate to a folder containing *.doc files I cannot see them. I tried adding *.doc files via drag and drop but Acrobat listed red exclamation marks stating it could not convert that file type. MS Excel, Powerpoint and Publisher appear in the supported file type list.
I believe this may be a Windows 7 compatibility issue as the same problem occured when using Acrobat 8 Standard prior to installing Acrobat 9 Professional. MS Word files are supported when both Acrobat 8 & 9 are installed on a Windows XP system.
I can create a PDF of individual MS Word documents using the acrobat tab inside MS Word itself.
I have thousands of Word files I need to combine into PDF portfollios (packages in Acrobat 8 I believe).
My great appreciation if you can provide any help.
Regards
Sunny

Bill@VT wrote:
OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
Well, thumbnails in Explorer don't work either, but we're not concerned about it. The preview pane is what we're worried about. There is a button in the top-right that turns the pane on. Previewing in Outlook does not work either.
Sabian Zildjian wrote:
Check the value for AppID in this registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
What do you have?
{534A1E02-D58F-44f0-B58B-36CBED287C7C}
DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

App cannot run on Windows Server 2012 R2

I have an application that runs well on Windows Server 2012. The application has two editions 32-bit and 64-bit, both are from the same code base.
However, on Windows Server 2102 R2, the x64 version of the application works, but the 32-bit version does not run. Invoking the 32-bit of the application generates the "This app cannot run on you PC" message.
I tried the compatibility troubleshooting, and it does not help.
Any suggestion on what could be the problem?
Thanks.
jwang

<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

Forms cannot run at Windows Server 2003

Windows Server 2003
Forms 10.1.02
Database 10g 10.2.0.1 Production
every time i run the forms application but the firefox show it is crash...
also my Windows Server 2003 cannot run any java application...
need some advice from experts here
THANKS
dausnasir

The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
Just for the records:
Safari prefs in my Windows live happy in:
C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
So, it must be some stuff, some little tricky service or software I install in my usual Windows.
Anyway, thank you very much...
If someone have some clue, I'll apreciate

Office 365 installation on Windows 7 with Office 2007 already installed on it

Hello, I am planning to deploy office 365 business premium on 30 systems that are running on Windows 7 and already have Office 2007 on it. If i downloaded office 365, will it overwrite outlook 2007 with outlook 2013. Or do i have to manually uninstall
Office 2007 before installing Office 365. I am planning to do cut over migration and make the exchange 2003 server redundant.

Hi,
If you deploy Office 365 to users, then the new Office and Office 2007 will coexist on the client.
One thing to note, as you already have Office 2007, which is 32 bit, make sure the new Office 2013 is also 32 bit.
Anyway, if the new Office has included all the applications(Word, Excel, Outlook, etc) in Office 2007, you can uninstall Office 2007 and just use Office 2013 to get a better experience.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

PSC 1610 WINDOWS 8.1 OFFICE 2007

I have a problem with my psc 1610 printer when I install the full packet driver on my acer Aspire AS3410.
I cant print from Internet og office 2007 but I can make a scan and copuý from my acer.
I have a Lenovo with the same windows 8.1 and office 2007 - no problem by using my printer.
I have tried to install the packet severel times whitout any solution of the problem and tried print and scan doctor nothing helps - hope you can help me.
[Edited for Personal Information]
This question was solved.
View Solution.

Hello @penalgade , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're looking into print issues. I would like to help!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Why are Office 2007 updates required when I don't have Office 2007?

I am guessing that you can answer questions here. I just want to know why Microsoft Vista insists that I need updates for Office 2007 when I only have Office 2003. i deny the updates, but then Microsoft insists and continue to send them to me until
I did finally update it. It is probably wasting my HD space.

Hi SallyM,
Please clarify what update you are required to install and check if you have Office 2007 related products on your OS.
However, for this end-user question please consult on other forums, for example:
Windows Update forum:
http://answers.microsoft.com/en-us/windows/forum/windows_update?tab=Threads
Or Office Update forum:
http://answers.microsoft.com/en-us/office/forum/office_install?tab=Threads
Also you can search for your update number and view the update related article to see the apply to list, it may has listed the product which needs the latest office 2007 update.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Safari 5 cannot run on windows XP pro

I am a bit confused about this problem. Reading some topics I saw that solution for my problem could be to delete or move "safari" folder from C:\Documents and Settings\user name\Application Data\Apple Computer. But this doesn't work for me. Also I tried to create a new user account. Log of as me and log in as new user. Then safari runs normally. Then I log of and log back in as normal(usual) user and safari runs normally too, but when I delete just created user account and restart windows, safari is dead again. Further, when I log in as new user and try to start safari then, it wouldn't run. Then log of as new user and log in as usual user then starts normally. Is there a solution for constantly log in/out?
Thanks in advance.

I've tried it on Win XP SP3 and Win XP SP2 and it works fine.
Have you tried installing it to a different folder?

Connecting to SCVMM remotely via install on workstation cannot run console windows to VMs (locally on scvmm it works)

We recently installed a SCVMM 2012 machine and connected it to a few HyperV2012 hosts.
From the SCVMM console locally on the machine it is installed on, I can connect to the Console of the VMs on the remote HyperV machines. However for some reason when I run it remotely from my workstation, I can connect to SCVMM just fine, but connecting
to the console of the VMs gives me the error:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons:
Another connection was established to the console of this manchine.
The virtual machine has been shut down or put into the saved state.
The user credentials do not have the necessary privilege to connect.
0x0003, 0x0000
The firewall is not detecting any dropped packets (I enabled logging) and I am logging in with the same user as I do locally to the SCVMM server, so it is not permissions.
Any advice would be extremely helpful. Thanks,
Nicholas

I also find a matching Success Security Audit for trying (even though it doesnt work):
An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
DOMAIN\MyNonDomainAccount
Account Name:
MyNonDomainAccount
Account Domain:
DOMAIN
Logon ID:
0x156DC3A5C
Logon GUID:
{bcdbadca-0910-a383-c130-2b86551f6d33}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
Source Port:
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0

Error 20532 on Windows Vista and Office 2007

I have a application developed in VB6, with Access 2000 as backend, using CR8.5 for reporting, running upon W2K and Office 2000. Application working correctly.
Tested same application upon Vista and Office2007 PC. VB6 side of application working correctly. However when I select a report from within the application (report is CR 8.5), I get following error:
Run-time error '20532'
Cannot find database DLL.
I re-wrote the report in question (exact duplicate of previous) in Windows 2K environment, re-tested new version on Vista & Office07, and report worked perfectly well!
I do not want to have to re-write new versions of all reports, therefore can somebody shed some light into why the original report will not run on a Visa/Office07 PC ?

Hi
This error occurs since the Crystal Reports Data-Bound Control database DLL (P2bbnd.dll) is not included with a Typical installation of Crystal Reports 8.5. You will need to perform a Custom or Complete installation.
If Crystal Reports 8.5 has already been installed:
1. Run the Crystal Reports setup again.
2. Click 'Add/Remove'. The 'Select Features' section appears.
3. Expand 'Data Access'.
4. Click 'Bound Reporting' and then click 'Entire feature will be installed on local hard drive'.
5. Click 'Next'. The Start Installation section appears.
6. Click 'Next' to install the driver and continue the setup to completion.
NOTE:· For information about the runtime file requirements for Crystal Reports, refer to Knowledge Base article c2008238.
Hope this helps!!!
Regards
Sourashree

My version of FF running on Windows XP, SP3 was just updated (by FF, apparently) Now it crashes regularly (4 times in the last 2 hours) What is going on.?

Yesterday (19Feb) FF was working fine and I hadn't experienced a crash in several weeks. This morning, the program had crashed, and when it recovered, it said it was updating. Since then, it has crashed 4 or 5 times, usually just in a static (not bringing new pages up) condition. My computer hasn't been changed. The only add-ons running are McAfee Site Advisor 3.6.0, Noscript 2.6.5.7, and Xmarks 4.1.3

Key into the address bar ''about:crashes'' you should get a list of Crash IDs paste a couple of those into your next Message. Also ensure any security related software is fully updated that often causes problems when upgrades to Firefox are released.
Standard reply:
We're sorry to hear that your Firefox seems to be crashing. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Enter about:crashes in the Firefox location bar (that's where you enter your website names) and press Enter. You should now see a list of submitted crash reports.
#Copy the most recent 5 report IDs that you see in the crash report window and paste them into your forum response.
Thanks in advance for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

Word 2007 AddIn Cannot Run on Windows XP SP3 + Office 2007

Similar Messages

Maybe you are looking for