Word Truncate

Hi Experts,
In smartforms i have to print 180 characters in text element but when i print this, it prints only 50 characters remaining will be automatically truncated. Can any one tell me how to print that full characters.
Regards,
Harish

Use include text ,
Create a text give the long text in the corresponding fields
maintain the long text in so10.
Regards
Naren

Similar Messages

Long text wtih Justified Alingment

Hi,
I have along text of 1000 characters. I want to place this text into an internal table, whose structure is of 132 characters. And the text should be in Justified alignment and without any word truncations,
I mean..if the 132nd charcater is 'e' in a word 'before', then it should not truncate as 'b' in first line and 'efore' in second line.
Do we have any function module for this requirement
-Priya

HI,
I have written a small program .. here i am spliting the string into 10 character lenth strings.. with out word truncation. you can change this to 132..
REPORT ztest1 .
DATA : lv_string(200) TYPE c.
DATA : BEGIN OF itab OCCURS 0,
       word(20) TYPE c,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
       sentence(10) TYPE c,
       END OF jtab.
DATA : lv_total TYPE i,
       lv_word TYPE i.
DATA : lv_10reached TYPE i.
DATA : lv_10chars(10) TYPE c.
lv_string = 'Hello How are you doing today'.
SPLIT lv_string AT ' ' INTO TABLE itab.
LOOP AT itab.
lv_total = strlen( lv_10chars ).
lv_word = strlen( itab-word ).
lv_10reached = lv_total + lv_word.
IF lv_10reached >= 10.
    jtab-sentence = lv_10chars.
    APPEND jtab.
    CLEAR : lv_total,
          lv_word,
          lv_10reached,
          lv_10chars.
CONCATENATE lv_10chars itab-word INTO lv_10chars SEPARATED BY space.
ELSE.
    CONCATENATE lv_10chars itab-word INTO lv_10chars SEPARATED BY space.
ENDIF.
ENDLOOP.
if not lv_10chars is initial.
jtab-sentence = lv_10chars.
    APPEND jtab.
endif.
LOOP AT jtab.
WRITE / jtab-sentence.
ENDLOOP.
Thanks
Mahesh

Response had already been committed

hello,
i have a struts application which saves a file to databse as BLOB. on click of alink this file has to be read from database and opened in browser. i do this by first reading from blob and write it to a file and then read it from the file and write to the response. i am able to read this file from databse and write it to a file on the physical drive. but i am not able to write the file in response so that it goes to browser.
i get the following error.
: java.lang.IllegalStateException: Response has already been committed.
the code snippet to write to response is as follows.
response.setContentType(oscDVO.getM_strContentType());
response.setHeader("Content-Disposition","attachment;filename=\"" + oscDVO.getM_strFileName()+"\"");
ServletOutputStream outputStream = response.getOutputStream();
File file = new File("C:\\"+oscDVO.getM_strFileName()); FileInputStream fileInputStream = null;
fileInputStream = new FileInputStream(file);
BufferedInputStream bis=new BufferedInputStream(fileInputStream);
int nByte = bis.read();
boolean b=false;
while(nByte != -1)
outputStream.write(nByte);
nByte = bis.read();
i am in urgent need of solution. i hv searched on most of the forums but hv not got any solution. if anyone has ever implemented similar knd of functionality pls help.
thanking in advance.

thnkou for ur quick response.
i tried closing the streams as well.
but the problem persists.
if i try to open a word document, the document opens properly, the same error of response committed ocurs but i think ms word truncates tthe error. but if i open the same doc file in any other editor, the error is displayed at the bottom of the correct data.
but with very small text files of less than1 kb also , i get this error.

Printing to .pdf from Word, right margin is cut off or truncated. Is there a fix for this?

I often have to print Word (2011) documents to a PDF. I never noticed a problem before. But I noticed that recently (can't say when it started), the right margin is cut off or truncated. And I cannot figure out a way to stop it!
What has changed in Mountain Lion PDF creation via the Print function is causing this!
Any help would be appreciated!

I did find a solution, but it does not resolve the problem.
I have several printers installed on my MacBook Pro. The truncation problem happens whenever the printer selected is my new HP PhotoSmart 7515.
But, if I change the printer in the dialog box to my Brother HL-4070cdw before I try to print to a PDF, then the document contents are NOT truncated!
So I found a solution, but it is not a perfect one.
Hopefully this helps!

Multiline variables are truncated in a Word task " Document from template"

Hi everyone,
Id like to know if somebody have had the situation described below and how can I solve it.
The problem is when I try to write in a word document (task created as a Document from template) a container element declared as a Abap dictionary referenced as TLINE-TDLINE (Char 132) with multiline flag activated, because when this variable has more than 3 lines during the execution of the workflow, the word document doesnt gets the whole value, it means the value is truncated and the word document just write or get 2 and a half lines (almost 350 or 400 characters) and I dont know why the rest of the value of this variable is missed.
Does somebody knows what could be happen?, Does SAP have some kind of limit of the amount of characters to be written in a word document with a multiline variable? Theres a bug in the system and a note to be applied? What can I do to write a variable wit multiple number of lines without missing any one?
Thanks a lot for your help.

I have had a formal answer from SAP (OSS Note) for this issue, and It is no good at all to me (notes 375669, 559234, 724755);
1. Theres a restriction on the length for text variables 80 characters
2. to implement a long text you need to put several variables together
If any one has another solution, I would appreciate your comments.
Thanks a lot
Felipe Uribe

Words in TOC tooltip truncated on Windows Vista

When the text on TOC tooltips in webhelp exceed a certain length, words are truncated. For example, if you have the word "software", you may have the "s" on one line and "oftware" on the following line.
This does not occur on Windows XP, only on Windows Vista. Has anyone experienced this issue?
I'm using RH7 and the browser is IE7. Operating system Windows Vista.

FYI, apparently a possible workaround is to edit the whthost.js file so that it does not automatically insert non breaking spaces between the words of the book and topic titles in the TOC tooltips.
For topics, this is in function writeAnItem: change var sName=_textToHtml(getItemName(nIdx)) to var sName=_textToHtml_nonbsp(getItemName(nIdx))
The same goes for function writeBook, for books.
As a result, long strings will wrap up in the tooltips, but between words, not in the middle of a word.
A side effect is that tooltips that did not previously wrap up in Chrome or Firefox (because they both handle tooltips differently than IE9) may now wrap up.
In any case, be sure to backup your original whthost.js file before you make these changes, and also be sure to check the results with different OSs and browsers, to ascertain the workaround will work for your users.

Truncated Word Docs

When I convert from PDF to Word using the Adobe Export PDF it is truncating the top of my document? Any ideas?

Thanks but I searched and searched there. Nothing listed that addresses this issue. Am I the only person to upgrade to 10.6 and have a problem with seeing type in Word afterwards? Does anyone understand what the error message means?

Word-stem or truncated search term

Hi All,
I would like to enable my users to use truncated words in
their searches. For example, if you enter "be" you would get
results with "beef", "beer", etc.
Does anyone know if that is possible in WebHelp output is RH
6?
M.S

In snippet 53, referenced above, it appears that the
discussion is on .chm output. Could it be that the workaround
described there is not applicable to WebHelp outputs?
Perhaps the example of querying "be" was not the best, but I
still cannot get search to work for truncated terms that do not
appear on the Stop List.

Trying to use GREP to truncate names in certain words..

Hello,
I am trying to find a way in GREP to select all the text strings that looks like this:
12345678wieawoejfoiaw.jpg
65434546wieawoejfoiaw.jpg
23542398wieawoejfoiaw.jpg
90989098wieawoejfoiaw.jpg
23234567wieawoejfoiaw.jpg
24326743wieawoejfoiaw.jpg
and leave (replace) it with just the first 8 numbers in each found string.
I remember doing something similar awhile back, where I break the type in parts (like digits or amount of characters and then go and get them back for the replace part, but I am drawing a blank...)
Any of my GREP friends around?
babs

Can you apply this you idea to data in a table where the content in a cell wraps?
What I want to do is have the wrapped data truncate with "..."
I thought I could do a find indescripment hyphen and replace with elipses. But wasn't able to get that to work. Also, wouldn't work like I would want it too. Image attached for illustration.
Do you have any idea I a person could do this?
Any ideas would be appreciated.
Thanks.

Truncation words in SQL seperated by Pipe Symbol

Hi All,
I have a String like this: "6.362636.10|6.362636.10.00.100000|o123456789123|1122334455|PrepaidRecharge|30.00|CC|AMERICANEXPRESS".
I need to take each string seperated by pipe symbol and export to seperate columns using SQL. Kindly help me in doing this.
Regards,
Prabhu

Hi All,
Any hint for the above query?
Regards,
Prabhu

Crystal 2008: Text, Can Grow=true, Max Lines=0, truncated after 2 lines

I have a fairly simple, grouped report with a handful of fields in each Detail section, one of which is a note/text field. I put the text field on its own line and set Can Grow = true, max lines = 0 so that it will display what it needs to display.
This happens to be a crystalreports.com report using data coming from Salesforce, and I can see in the source report that I have about 7 lines of text for one of my groups, but crystal is truncating it after two lines, and in the middle of a word.
The word ('for') doesn't have any obvious special characters in it, so I'm guessing that there's some sort of character limit that I'm bumping up against.
I have another record that is returning more than two lines, though; are there particular characters that could cause this? I can scrub the data and/or put Salesforce Validation Rules in place to try and prevent them from getting in.
Any suggestions would be appreciated.
Duncan

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

DocTotal in words Crystal Report

Hello,
I am trying to convert DocTotal field into words and not able to do so. Please advise a formula which an help me to get the doctotal in words in Purchase Order Crystal Report Layout
For example by doctotal is 22,750.00 so I want the amount in words as
Twenty Two Thousand Seven Hundred Fifty US Dollors & Zero cents.
Please advise.
Kind Regards,
Ravi

Hi Ravi,
Use this :
numbervar RmVal:=0;
numbervar Amt:=0;
numbervar pAmt:=0;
stringvar InWords :="Rupees ";
Amt := <Enter your value here or Pass field here>
if Amt > 10000000 then RmVal := truncate(Amt/10000000);
if Amt = 10000000 then RmVal := 1;
if RmVal = 1 then
InWords := InWords + " " + towords(RmVal,0) + " crore"
else
if RmVal > 1 then InWords := InWords + " " + towords(RmVal,0) + " crores";
Amt := Amt - Rmval * 10000000;
if Amt > 100000 then RmVal := truncate(Amt/100000);
if Amt = 100000 then RmVal := 1;
if RmVal = 1 then
InWords := InWords + " " + towords(RmVal,0) + " lakhs"
Else
If RmVal > 1 then InWords := InWords + " " + ToWords(RmVal,0) + "Lakhs";
Amt := Amt - Rmval * 100000;
if Amt > 0 then InWords := InWords + " " + towords(truncate(Amt),0);
pAmt := (Amt - truncate(Amt)) * 100;
if pAmt > 0 then
InWords := InWords + " and " + towords(pAmt,0) + " paisa only"
else
InWords := InWords + " only";
UPPERCASE(InWords)

WebDAV: Excel 2013 truncates the encoded URL at # (%23)

(originally posted in Open Spec forum, but was asked to repost here)
We encountered a problem on our existing WebDAV server with Office 2013. When a file name contains a number sign (aka hash, aka pound sign), Excel truncates the URL at that sign. Note that the URL is properly encoded, i.e. "#" is replaced
with %23.
Word and Powerpoint behave properly and have no issues opening files via URLs containing %23. E.g, for the URL http://server/otcsdav/nodes/1500722/doc1%23end.docx, Word first calls OPTIONS on otcsdav/nodes/1500722, then HEAD otcsdav/nodes/1500722/doc1%23end.docx,
then eventually a GET. The file opens successfully as "doc1#end.docx", gets locked, edited, updated and unlocked.
Excel, however, truncates the URL (http://server/otcsdav/nodes/1500722/excel1%23end.xls), and sends HEAD for /otcsdav/nodes/1500722/excel1, which, of course, returns 404.
Funny enough, double-encoding (i.e. to %2523) seems to work for Excel, but breaks everything else. I.e, with url = "otcsdav/nodes/1500722/excel1%2523end.xls" Excel sends HEAD for "/otcsdav/nodes/1500722/excel1%23end.xls", while Word will
send HEAD for the URL verbatim, i.e. "/otcsdav/nodes/1500722/doc1%2523end.docx"
Does anyone know it it's an Excel bug? is there anything we can do to circumvent this?
P.S.1 Excel 2010 works just fine, the issue first appeared in Excel 2013.
P.S.2 I know that Sharepoint doesn't support "#" in filenames. Our server is NOT Sharepoint, and "#" doesn't seem to be disallowed in WebDAV protocol.

Hi Maria,
This forum is used to discuss questions about Excel for developers, most probably the issue is related to code.
According to your description, it seems the issue doesn't meet the topic. It might be related to how the server analysis the URL and find the corresponding file.
I have moved this thread to "Where is the forum for" forum.
Thanks for your understanding.
Regards,
George.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I turn on word wrapping in iCal v.5.0.2?

I am using Mac OS 10.7.3 Lion. I have some events in my calendar with more words than a line will allow. When I print out the calendar, the text is shortened like "Meeting Monica...day Dinner" instead of the full text "Meeting Monica for her birthday Dinner" ....but I want the text to wrap.
Apparently this was possible in iCal on Snow Leopard. Does anyone know how to fix this?
I do not want to make the font smaller to make the text fit. There is plenty of vertical space for the full text.
Thanks for your help!

Greetings,
I think you are using an "All-day" event rather than a timed event. Based on my testing it seems that the iCal print UI truncates lengthy text for All day events but not for timed events (event 1 is all day whereas event 2 is a timed event):
I also can't find a way to change this behavior.
I'd suggest you submit feedback to Apple to let them know you'd like the ability to print all day events with their text in it's entirety: http://www.apple.com/feedback/ical.html
As a work around, try changing your even from an all day event to a timed event (double-click it and uncheck the all day box).
Hope that helps!

The some words in perfectly formatted messages I email are merging or joining together likethis or evenlikethis when they are recieved. How do I fix this?

When I send emails that are perfectly formatted they are being somewhat truncated when they are received by whomever I'm sending them to. Words will be joined together throughout the email in combinations of two or three.
I know this is happening because when someone responds to my email, I see the email that I have sent them (in their response email) and it is messed up as described above. I recently asked one of my recipients if this was something that was common with my emails and I was told yes.
Here is an example, cut and pasted from an email sent via Thunderbird: "A number of years ago we were speaking with Stephanie MacDonaldat CIT about our film/video production services. Our Account Exec assigned to your account left a number of months later and we subsequently lost contact.
I just visited your web site and noticed thatyou are using video to help define your services and corporate culture. We'd love to be considered if you are planning any more productions.
One genre of web video thatyou may be interested in is 'Recruiting'.
Companies that wish to attract young, bright talent, arereaching out with fun and engaging videos distributed online and through social marketing. I noticed that you have a Careers page, but no video. Is this something that you could be interestedinat some point?
We recently produced one of these videos for an IT company located in Torontoand I'd be delighted to send you alink if you like..."
The version of Thunderbird I am using is 17.0 and I am running the program on a MacBook Pro with OS X 10.7.5 installed.
Fixing this issue is critical as my emails look very unprofessional and leave a negative impression with my contacts. Please tell me what I can do to fix this.
Best regards,
Derek Shipman

are you pasting text from another source into Thunderbird?
Does it appear correctly in your send folder?

Word Truncate

Similar Messages

Maybe you are looking for