Work book error

hi,
when i am trying to change query global def after opening the work book in BEx getting a error message 'failed to load control 'rich textbox' fromrichtx32.ocx. your version of richtx32.ocx may be oudated. make sure you are using the version of the control that was provided with your application"
thanks in advance

Hello Krishna,
Goto BEX Analyzer -> Bex Explorer -> Installation check.
This will this will run a macro to check the Front End GUI installation, Excel  and displays various informations.
Details marked in Yellow are warning and Red are errors.
Warning, sometime can be ignored but not errors.
You can see the following OSS Notes as well
Note 575066 - Missing files "msvcp60.dll", "msvbvm50.dll", "msvbvm60.dll"
Note 956143 - Warnings displayed by an installation check
Thanks
Chandran

Similar Messages

  • Pre-calulation of works books errors : Precalculation failed: E Path

    Hello,
    I have been trying to test our pre-calucation server (Which has been new installed) and for testing I have created two workbook one in the 3x version and the other 7.0 version. I have run into the following issues:
    1. In Tcode RSPRECADMIN I chose test of pre-calculation. Here is where the problems start
    a) When I do an F4 on Workbook entry I only see 3x version workbook and not the 7.0 version which is
           wierd !
    b) On choosing the 3x version and hitting execute I recieve an empty workbook.
    2. On trying to execute precalucation service using the broadcaster on the web the service fails for both the
        workbooks with the following error messages (same in SLG1 too) :
    "Precalculation failed: E  Path cannot be null. Parameter name: path"
    I have gone through a lot of posts and a couple of people have had the same issue but have no information on  a definitve fix.
    If anyone had the same issue and were able to resolve the same; your advice would be greatly appreciatedhare your information.
    Thx,
    Karthik

    I finally fixed it. I did a fresh installation on an windows XP machine and installed the 710 gui (patch level 601) and the pre-calc server.
    On which the old error went away and I got a new error on broadcasting 7.0 workbooks (3x ones were successfull) :
    |Type|Date      |Message text                                                                                |LTxt|Time    |
    |    |08/13/2008|Processing setting ZZTST_WBOOK_BCAST_70                                                              |    |16:00:25|
    |    |08/13/2008|Precalculation server was started                                                                    |    |16:00:25|
    |    |08/13/2008|Message: Registration to 10.128.200.30/sapgw01 suc                                                   |    |16:00:40|
    |    |08/13/2008|ceeded.                                                                                |    |16:00:40|
    |    |08/13/2008|Version: 7100.1.601.35                                                                               |    |16:00:40|
    |    |08/13/2008|Connection passed                                                                                |    |16:00:40|
    |    |08/13/2008|Load workbook EPHA2OKV9VZ2ZB74OTEFAS281                                                              |    |16:00:40|
    |    |08/13/2008|Start precalculation against RFC server SWPHXTEST3                                                   |    |16:00:40|
    |    |08/13/2008|Message: Registration to 10.128.200.30/sapgw01 suc                                                   |    |16:00:40|
    |    |08/13/2008|ceeded.                                                                                |    |16:00:40|
    |    |08/13/2008|Version: 7100.1.601.35                                                                               |    |16:00:40|
    |    |08/13/2008|Connection passed                                                                                |    |16:00:40|
    |    |08/13/2008|Begin MenuRefreshPrecalc                                                                             |    |16:00:40|
    |    |08/13/2008|File or assembly name BExAddin, or one of its depe endencies, was not found.Failed To Create BExConne|    |16:00:40|
    |    |08/13/2008|t in MenuRefreshPrecalc                                                                              |    |16:00:40|
    |    |08/13/2008|Precalclulation in thread 3failed.                                                                   |    |16:00:40|
    |    |08/13/2008|Cannot precalculate workbook CATS Test Workbook                                                      |    |16:00:40|
    The problem was witht the bex analyser - On opening it the pre-calc server I noticed that the bex toolbar buttons were not responding (open, save etc). Found a note which talked about identical symptons and on following the note fixed the bug. After which was able to broadcast workbooks successfully.
    OSS note 1121263 - BEx Analyzer 7.10: Support for Office XP.
    Hope this information helps someone.
    P.S : We are on SPS15.

  • Error After sharing work book

    Hello All,
    I modifed a report by adding 2 news columns from a folder(which is based on table2). I am able to genrate the work book successfully.
    So i shared the same work to another user , but while user is running the report he came across an error
    saying "Invallid Comination of Joins Invloving Outer Joins - table1 -> table2 (outer) ".
    How can this be possible. If there is something wrong in join conditions work book should not work for me.
    It is working fine in my case but its giving error when the shared user is running. Please let me know the reasons for this.
    Kind Regards,
    Kumar.

    Hi,
    I think your answer is in Tamir's reply. If disabling fan trap did not resolve your user's issue, then the report needs to be rewritten. Even if it did resolve your user's issue, the report needs to be rewritten.
    It would be difficult for us in this forum to help you to do this.
    However, things to look for: How are your folders constructed? One folder, one table? One folder, many tables as in custom folder or database view? If you are joining folders together in the report where any or all of the folders are constructed with many tables included in them, you run the danger of hitting the fantrap issue - especially, if outer joins abound. Try flowcharting your report and see what that tells you. In Discoverer Plus, choose Sheet \ Show SQL\ copy the sql and place in your favorite sql tool. I suspect the answer to your issue will become obvious then.
    Regards,
    Nancy

  • Work book migration problem : error in graph

    Hi all,
    I have a work book ,created in 3.x ...now we are on 7.0 So when iam migrating i got error .
    I have resolved  other errors..but one error is remained , problem with the graph....
    on X axis with values it is showing header row also..how can i avoid header row...? to not display in graph....
    As data table  source controlled by BI  so ia mnotable to maintain range for graph....
    Problem is when it is with out scalling factors it is displaying correctly in graph also..
    When iam selecting option to display scalling factor it is showing header row also in graph... coz of that graph was showing wrong data...
    cal day    Quantity
    above is with out scalling factor display..everything correct
    blank     Quantity
    cal day       KG
    When iam selecting scalling factor sys will add one more row to display... this is the problem sys did not set automaticaly to consider or to leave first 2 rows...
    How can resolve...? In 3.X it is working fine...... (There is no macro )
    Thanks
    BK
    Edited by: BK BI on Jun 8, 2010 8:56 AM

    Hi,
    Go to the workbook in development system. Find out the technical name of the workbook ( in query designer you wil find in properties).
    Copy it and go to the production system. Assign it to the required role you want. It will be visible in the perticular role in production.
    I would still suggest if possible transport the role from dev to prod. (to keep all systems in line with each other)
    Hope this helps.
    Regards,
    Viren

  • Work book save error in SAP business objects in bi platform

    Hi,
    We are facing issue for saving workbook in SAP Business objects in bi platform.
                             While saving work book it's asking user id and passowrd and webservice URL. after entering this it's asking to enter proxy user and passowrd.
    Please suggest what is the proxy id and password we need to give here or any configuration we need to do to connect workbook with sap business objects.
    Error: Proxy error 407 and Authorization failure.
    ##Screen shot attached##
    Thanks & Regards,
    Sreekanth Reddy

    Atul,
    Check if you are able to login into Manage Servers through Central Configuration Manager.
    If thats successful, the issue is either with Krb5.ini or bscLogin.conf file.
    You can check http://service.sap.com/sap/support/notes/1631734 and download the white paper to go through the settings.
    Make sure there are no white spaces in Krb5.ini and the format is correct.

  • The work book does not exist in the document store

    Hi Forum,
    Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

    Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
    Cause and prerequisites
    In very rare cases, when you store a workbook, you might not be able to open it again.
    Solution
    Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

  • I am wanting to exactly match two ID numbers from two differing worksheets within one work book. Once matched I am wanting to retrieve a row value from the second worksheet into the first. Any help much appreciated.

    I am wanting to exactly match two ID numbers from two worksheets within the one work book. ID numbers are non linear. Once exactly matched I wish to retrieve a corresponding row value from worksheet two and have it appear in worksheet one against the correct ID number. I have been looking at IF, VLOOKUP, and MATCH functions and suspect that what I want to do requires a combination of two or more. Any help will be greatly appreciated.
    regards Vaughanh

    Vaughan,
    Data A:D is all cells start at column A thru column D.
    There is built-in help using the menu item "View > Show Function Browser"  in the search field (top right) you can enter vlookup and you will see the detailed description.
    From this we see:
    VLOOKUP
    (search-for, columns-range, return-column, close-match)
    search-for:  The value to find. search-value can contain any value type.
    columns-range:  A range of cells. range is a reference to a single range of cells, which may contain values of any type.
    return-column:  A number that specifies the relative column number of the cell from which to return the value. return-column is a number value. The leftmost column in the range is column 1.
    close-match:  An optional value that determines whether an exact match is required.
    close match (TRUE, 1, or omitted):  If there’s no exact match, select the column with the largest top-row value that is less than the search value. Wildcards can’t be used in search-for.
    exact match (FALSE or 0):  If there’s no exact match, return an error. Wildcards can be used in search-for.
    So... the 2,0 means return the value form the same row as the lookup value but from the 2nd column of the range.  3, 0 means from the 3rd column.  the ", 0" means exact match

  • Work book Transport BEx Analyser

    Hi Experts,
    I have a work book which I assigned to menu roles in Dev BW and need to get it transported to BW prod system.
    I normally save this work book in roles and in my customised role and collect that work book in request to transport to prod.
    I have a this problem in prod when I try to open the same work book in Prod system I have error message saying serviere program error has occurred and cannot open the work book in prod system.
    please advise.
    Is this problem with BEx Analyser or If I transport my role again to Prod system which is customised under which work book is saved.cant solve this issue please advise.
    If I want to transport the role also how can I do that from PFCG my role name is ZXX_BW_XX.
    Regards,
    Tati.
    Edited by: Tati Santhosh on Nov 10, 2010 9:41 PM

    Answered

  • How do I insert views in work book (Multiple)?

    Hi Jr,
    I have managed to get my work book with multiple queries in it. which is working fine n the credit goes to your answers in the forum.
    Now I want to insert views instead of queries. when I tried to do so it is giving me some critical error.
    Can you please explain me how do I insert multiple views in a workbook?
    Thanks and Regards,
    Sekhar.

    Hello Chandran,
    Thanks for your reply. It is working fine now.
    Now I want to insert VIEWS in the place of queries in one workbook. When I tryed to do that its giving me a critical error and closing the Bex. Can you please explain me how do I insert query Views in to one work book?
    Thannks and Regards,
    Sekhar.

  • Work book is not refrsing proprely...

    Hi All,
    when i changed my bill date input value in work book it is displaying this error.
    Program error in class sapmssy1 method:Uncaught_exception.
    An Exception with the type CX_SY_EXPORT_NO_SHARED_MEMORYoccured but neither no space left in SHARED MEMORY.
       after that is asking bw system id and password.but work book is ruunning in Qualty system.
    In my cube have upto 21 requsts in qualty system.
    Could u please give any idea how to achive this error.

    Hello,
    Please view the following notes,
    1021132    EXCEPTION when refreshing Workbook with mandatory v
    779123     Memory-related terminations at runtime
    Regards
    Deepika.k

  • Work Book Help needed

    Hi Guys
           I changed the query to add a new field in the rows...now I transported the role and the respective query to production ..But the users are executing the workbook and they said nothing has been changed...when I check that work book iam also not able to see my changes....So I executed the same work book in Dev and it is also not showing my changes (work book is saved by my co worker)...But If I execute the query by analyzer , i can able see my changes...so I wanted to save that workbook to overwrite my coworker's workbook ...But its giving me error...(A critical error)..
    please advice me how to save the workbook (replace the workbook ?)..
    regards

    Hi thanks
    It makes sense...But when I open the work book and right click on a field I can not see interaction tab ...I can able to see Properties and Query Properties (in addition to Back , Backto start, convert to formula ,keep filter, select filter,exchange, revmove dirlldown, swap axes...)
    Please tell me where I can find this..even i searched in global settings too
    regards

  • Work book taking longer time to open

    Hi,
    We created a workbook and embedded one  input ready query in it.  The query when executed separately takes 1 minute to load.  But when the work book is opened for the same selections, it takes 3-5 mins. 
    There is no Macros written in the workbook and no functions are called while loading work book.
    What might be the reason for this.  Is there any way by which we can improve the performance?
    Please suggest.
    Thanks,
    Seetharaman

    Hi there,
    Open BEx Analyzer.
    Click on global settings (before opening the workbook) and mark the option "Repair workbook while running" (option available since BEx Analyzer support package 5 and above)
    Now open the workbook (it will still take the 3-5 minutes).
    Now save the workbook
    Remove the option you have just marked before ("Repair workbook while running").
    Close BEx Analyzer and test it again.
    Diogo.

  • Saving a query in Work book

    hi experts,
    I have made the changes in query and the changes is not reflecting in the work book of that query.. can u give solution for this....
    regards,
    preety

    Dear Preety,
    After saving the Query SAVE it as a EXISTING WORKBOOK.
    Regards,
    Ramkumar.

  • BW Work Book as an iView in Portal

    We are on BW 3.5 and EP 6.0, using BEx Application Designer i am abel to create work book which is based on a query, i can create an iview for EP6.0 in BW System.
    But how can i see this work bok in SAP Enterprise Portal.
    there are fre requisites i.e establishing sso between BW and SP, setting JCO connections some 13 steps i did all these.
    how we can see an iView which creted in BW,display it in EP.
    is there any steps?
    rrmxp asks for WBID, if i enter an WBID it opens an Excel.

    Hello
    How r u ?
    Our server is in another country, so they have temporarily stopped the server. They are saying that it will take some time for starting up one of the servers. Now we are working on another project. so i have to wait till they start the other one.
    Hey do u have yahoo or msn or google messenger ? coz this Topic keeps on going back and back man. If u have add my ID
    [email protected]
    [email protected]
    [email protected]
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • How to display the Overall result value at the top of work book

    Hi,
      How can i display the value of  Overall result(Sum of the Total) column at the top of the work book in Text field.
    Thanks
    Sreadhar

    Go to Query Global properties in Query designer and you can find a setting to show result rows on top. This setting will show overall result as first row in the report. But I don't think you can show it in Text field in WB.

Maybe you are looking for