Work book with many queries
Hi everyone,
Now we have a very urgent problem,you know the workbook is composed of by two or more querys.but when we refreshed it ,only a part of the query is refreshed,not all the query.So when the customer update the workbook,they get the history data which the saved version.
Now the system version is BI7.0,it has lots of problem,and our support package already been 15.
Is there anyone ever met such problem,
Thanks & Best regards,
hi,
In BI 7 work book you can find one check box for refresh work when open in the properties of work book, please check that and see.
hope this link provides u useful info...
[http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a551ce09411d2acb90000e829fbfe/frameset.htm]
Assign points if helpfull.
regards,
NR
Similar Messages
-
How to create the default empty work book with company logo and address????
Hi Guru's
I am working in ECC5.0 (BW 3.5), i wann create the default empty work book with company logo and company address. so when i am executing any query's that should open in the default empty work book.
greatly appreciated your help. will assign pt's for sure.
thanks and regards
MohanHi Mohan,
Report designer is used in BI 7.It is a seperate application used for formatting
the report.
For BW3.5,go through this link.
http://help.sap.com/saphelp_nw04/helpdata/en/33/746e393cf65c1ae10000000a114084/frameset.htm
This would help you
Regards,
Senoy -
Error while saving Work book with XLSM extension
Hi All,
While i saving workbook in excel 2007 with extension XLSM,
Its not allowed.How i can proceed with this.
I am using SAP BI 7.0
please let me know what i need to do.
KrishnaEnsure that you have not opened any excel file or text file with similar name.
thanks
G. Lakshmipathi -
Is there an easy way to make a long chapter into a book with many chapters?
I have a long, book length text file (50 chapters). It's one file in one ID chapter. I would like to make it 50 files in 50 ID chapters in one book (indb). Can that be easily done?
ThanksYou can "move the pages" which make one chapter in your ID file in the new documents and then save the new file, similarly you can do it for the 50 chapters and then compile this 50 chapters together in a book.
-
How to add 4 more tabs in a Work book with conditions?
hi experts,
i have one workbook, it has two tabs,
1st tab has two distribution channels 10 and 20,it has a condition to show inv >= 5000
2nd tab also has same distribution channels and the condition to show inv <= 10.
but what my need is,
i want to insert 4 more tabs, stick to one query for all tabs
tab 1: Dist. Channel 10 inv >=5000$
tab 2: Dist. Channel 10 inv <=10$
tab 3: Dist. Channel 20 inv >=5000
tab 4: Dist. Channel 20 inv <=10.
pl help to do this,
thanks in advance.
venkatHi,
All I know is, you have to write Macro's and VBA code for this scenario and it will not be that easy. I can tell you that. We almost had the same situation and but we gave the workbook in different format.
http://help.sap.com/saphelp_bw21c/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/frameset.htm
You have to use appropriate function in the above link to achieve this.
Good luck.
Please Assign Points if it helps you.
Regards,
PNK -
How do I insert views in work book (Multiple)?
Hi Jr,
I have managed to get my work book with multiple queries in it. which is working fine n the credit goes to your answers in the forum.
Now I want to insert views instead of queries. when I tried to do so it is giving me some critical error.
Can you please explain me how do I insert multiple views in a workbook?
Thanks and Regards,
Sekhar.Hello Chandran,
Thanks for your reply. It is working fine now.
Now I want to insert VIEWS in the place of queries in one workbook. When I tryed to do that its giving me a critical error and closing the Bex. Can you please explain me how do I insert query Views in to one work book?
Thannks and Regards,
Sekhar. -
Doubt in Work Book (display Variables orderly)
Hi,
I am working in BI 7.0.
I have a work Book with 4 Queries
each Query has a characteristic Variable
say 1st Query has a variable ZABC1
say 2nd Query has a variable ZABC2
say 3rd Query has a variable ZABC3
say 4th Query has a variable ZABC4
When I am Executing my Work Book
Variables not displaying orderly
they are displaying
ZABC2
ZABC1
ZABC4
ZABC3
I need to display like this, Orderly
ZABC1
ZABC2
ZABC3
ZABC4
can any body give some Idea ?
I have searched in SDN too, no information.
surely points rewarded
Thanks
PrasannaHi,
Edit the workbook according to your variable display. Like, insert a row before ZABC2 variable, cut the variable ZABC1 and past it before ZABC2.
now you will see like this.
ZABC1
ZABC2
ZABC4
ZABC3
Now, do the same thing again for 3 &4 variables. Insert a new row before ZABC4. Cut ZABC3, and paste before ZABC4. Now the variable will be displayed as follows.
ZABC1
ZABC2
ZABC3
ZABC4
now, Click SAVE button and save as existing workbook.
I hope you can handle your issue now.
Regards,
S P. -
Problem with ejecution work book (determining run time)
Hello, I have a problem with the Discoverer Desktop (v. 10.1.2.1) db. Oracle 10G.
Whenever I execute a work book with my user in any equipment of the network
when determining the run time of the report is delayed , only with my user and
the privileges of the reports and tables is ok.
excuse my english...
thanksIt sounds like the problem with the query estimator. Basically, the query estimator IMO should be turned off for Discoverer as it's not Disco's best feature. As to why only you see it, are you sure it's not only when run on your PC?
If you click over to a 'very old' link I have at:
http://proudman.homestead.com/files/optimizing_discoverer_on_client.htm
or at the bottom of this message I've copied it, you'll see #1 is the first thing you want to change.
You may not want to change #2 or #3 but take a look. Also, where the instructions refer to: Disco 3.1 just change to your version (ie: 10). Gotta' update that someday.
Russ
=================================================
3 REGISTRY SETTINGS TO CHANGE
============================
Note that for each of the three suggestions below, if the entry does not exist in your registry, then create it and set the value suggested.
1. Database\QPPEnable
type - DWORD, default 1
To Do: Turn off query prediction.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 3.1\Database\QPPEnable
It should be set to a DWORD value of 0 (zero). To re-enable query prediction at some later point in time, either remove the registry key or set it to 1.
2. Database\QPPCBOEnforced
type - DWORD, default 1
To Do: Stop query prediction forcing the use of the cost-based optimizer.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 3.1\Database\QPPCBOEnforced
It should be set to a DWORD value of 0 (zero) which means use of the Cost-based Optimizer (CBO) is not enforced. The CBO will follow the normal rules of the database server.
3. Database\ObjectsAlwaysAccessible
type - DWORD, default 0
To Do: Stop validating that the tables/views folders refer to exist and that the user has access to them.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer3.1\Database\ObjectsAlwaysAccessible
It should be set to a DWORD value > 0 (ie: 1) which means validation will not take place.
------------------------------------------------------------------------------------------------------------------------------------------------ -
Hi Friends
Can any one let me know why Iam not able to see the Work book automatic refresh / Interaction tab when I right click and selct the properties / query properties of any record /KF of a workbook.
Am I checking correctly ? Is there anything new with BI 7 .0 / Excel new version
I need to refersh the work book with the changed query definiton ..but its not allowing me that...where as If I open the query then I can able to see my changes in that ..
Please advice ASAP
regardsSunil,
You said that "profit centre is not getting refreshed even though it is similar". Similar is not good enough here.
To refresh multiple queries with only one set of input parameters, you must use the SAME variable for each InfoObject in each of those queries.
Hope this helps...
Bob -
Hi,
I need some help in work book formatting. I am explaining the scenario below
I have a work book with 3 charactristics and 2 key figures. on the 6th column I have put some comments.
When I drill down by another characteristic i would expect my comment column to be shifted to righ hand side to accomodate the new characteristic rather hidden or overwritten by the drilled down characteristic.
This is working fine when i run the report in BW 3.x where I have the following setting.
DISPLAY : Adjust format after data refresh
Display filter cells for structures
INTERACTION : Enable interactive functions
COLUMNS : Adjust to whole column
But this functionality does not work in BW7.0. Could anyone please tell me the setting in BW7.0 to accomplish this.
Appreciate your help.
Regards,
Billany help in this. This is slightly urgent. point will be given to the right answer.
-
Hi experts,
I have made some changes in properties in the existing query for one of the characteristics and executed successfully in development.
But the issue there is an existing workbook created on this query.when i open this work book and executed its not showing the modified values.I want to save the existing work book with modified properties values which the query out put dsplays
The requirement is Detail WB > Refresh the query to the workbook and resave the workbook so the workbook reflects the decimal places the same as the query.
can anyone suggest me how to do it.
Thanks
Edited by: sreeanil on Dec 24, 2011 6:41 AMHI,
You can refer the following document :http://wiki.sdn.sap.com/wiki/display/BI/ChangesmadeinQueryisnotreflectedinWorkbook
It shows you how to reflect the changes made in the query definintion to the workbook.
HOPE its of help for you !!!! -
Hi,
any one encounted this type of situation with Work Books.
I am using BI 7.0, BEx 7.0.
I have a Work Book with 30 sheets each sheet has one query.
Today after saving the work Book ,
Now when i try to open the work Book it is not opening.
I don't no what is the Problem.
When we open the work Book
in <b>status bar i can see BEx Analyzer is Processing</b> then
after some time <b>status is Ready</b>,
But work book is not opening.
I am really wondering the behaviour of BEx,
I saved the Work Book now and it is not opening.
Help me to resolve this issue, sure I will assign points.
Thanks
PrasannaHi,
after searching in SDN ,
i found Function Module <b>RRMX_WORKBOOK_LIST_GET</b>
then I check in system in FM, it is showing the workBook.
but my Problem is how to Open my Work Book ?
any Idea will be appreciated with points.
Thanks
Prasanna -
I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
Creating ePub files with Pages
Summary
Learn how to create ePub files with Pages.
Products Affected
Pages '09
ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
iBooks supports both ePub and PDF file formats, and you can export both from Pages.
When to use ePub or PDF
Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
More details on using PDF
Creating an ePub Document to Read in iBooks
You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
Download the “ePub Best Practices” sample document at the following web address:
http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
Export the document you create to ePub format to see how it looks in iBooks.
Preparing an existing Pages document for export to ePub format
Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
Note: The Pages document must have been created using a word processing template. -
My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.
1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail. -
I was working with many open tabs and firefox crashed. Now it won't connect to the internet at all.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
Printing to a Windows XP shared printer
I have long printed from my Macbook with Snow Leopard to my Windows XP computer with a shared printer. I began encountering intermittent connection issues, so I reset my printers. Now when I go to add a printer, under Windows, I see my Windows XP com
-
Latest photos are marked with a cloud symbol but do not appear on-line in Revel.
-
Here's the situation. I have an Excel sheet that tracks financial indicators (like Prime Rate, exchange rates, etc.) on a monthly basis. This sheet uses sparklines to chart the last 12 months of data. The sheet has a procedure which hides all but the
-
Prob in HR_MAINTAIN_MASTERDATA
Hi am using fm HR_MAINTAIN_MASTERDATA to upload Hire data and am getting two drop downs on personnel data screen one is Titel and other is DOB for me DOB data is coming properly but Titel is not coming and in technical details its name is Q0002-
-
Putting jalbum page into iweb.. Help please.
I would like to find an easy step-by-step description of how to get a jalbum page intergrating into a iweb as a separate page. Is this possible. I see posts say yes it is possible, but I see no clear instructions for doing this. I am basically "code