Problem with ejecution work book (determining run time)

Hello, I have a problem with the Discoverer Desktop (v. 10.1.2.1) db. Oracle 10G.
Whenever I execute a work book with my user in any equipment of the network
when determining the run time of the report is delayed , only with my user and
the privileges of the reports and tables is ok.
excuse my english...
thanks

It sounds like the problem with the query estimator. Basically, the query estimator IMO should be turned off for Discoverer as it's not Disco's best feature. As to why only you see it, are you sure it's not only when run on your PC?
If you click over to a 'very old' link I have at:
http://proudman.homestead.com/files/optimizing_discoverer_on_client.htm
or at the bottom of this message I've copied it, you'll see #1 is the first thing you want to change.
You may not want to change #2 or #3 but take a look. Also, where the instructions refer to: Disco 3.1 just change to your version (ie: 10). Gotta' update that someday.
Russ
=================================================
3 REGISTRY SETTINGS TO CHANGE
============================
Note that for each of the three suggestions below, if the entry does not exist in your registry, then create it and set the value suggested.
1. Database\QPPEnable
type - DWORD, default 1
To Do: Turn off query prediction.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 3.1\Database\QPPEnable
It should be set to a DWORD value of 0 (zero). To re-enable query prediction at some later point in time, either remove the registry key or set it to 1.
2. Database\QPPCBOEnforced
type - DWORD, default 1
To Do: Stop query prediction forcing the use of the cost-based optimizer.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 3.1\Database\QPPCBOEnforced
It should be set to a DWORD value of 0 (zero) which means use of the Cost-based Optimizer (CBO) is not enforced. The CBO will follow the normal rules of the database server.
3. Database\ObjectsAlwaysAccessible
type - DWORD, default 0
To Do: Stop validating that the tables/views folders refer to exist and that the user has access to them.
This can be done by specifying the following registry key:
HKEY_CURRENT_USER\Software\Oracle\Discoverer3.1\Database\ObjectsAlwaysAccessible
It should be set to a DWORD value > 0 (ie: 1) which means validation will not take place.
------------------------------------------------------------------------------------------------------------------------------------------------

Similar Messages

Problem with Assemble Test VIs for Run-Time Distribution

I get an error that a file is already in memory and that I will have to remove it before I can build the application. The file in question is Get File System Seperator.vi. It lives in vi.lib\Utility\sysinfo.llb. If it is not a stock vi from national and was placed there by some other add on tools (perhaps an OpenG toolkit), how can I disable it? Labview itself will not boot without this sysinfo.llb.
I am using TestStand Engine 2.01 on the XP system and 2.01f1 on win2000 with the same results. I am not using numerical limits so the fix (patch) for multiple numerical limits does not seem to be needed.

Hi Paul,
In the description of your problem you state that "I will have to remove it before I can build the application". I was wondering if you could elaborate on the scenario you are describing because this is a little bit confusing to me as it is. The "Assemble Test VIs for Run-Time Distribution" tool in the Sequence Editor does not involve "building an application" as part of the process of using it. When you select the menu option for this tool, a TestStand sequence is invoked that has a few LV VI steps in it which perform the VI Assembly process, with no application building involved (just searching through sequences for top-level vis, their sub-vis, and copying them all into a directory you choose). I hope this describes what it is I'm not understanding about your statement, but to explain why it is that I feel this is important is in order to reproduce the problem I need to know exactly what it is you are doing at the time of encountering the problem. To go over a common set of issues people encounter when they use this tool, I would like to see if you have tried the following:
1) Have you checked to make sure that the LabVIEW Standard Prototype Adapter is configured to use the LabVIEW development environment as its Run-Time Server before running the tool. It will not work if the adapter is set to use TestStand LVRTS or TestStandGUILVRTS. The assembly tool requires features of the full LV IDE to perform the functions it carries out, and you will get an error if the adapter is configured improperly. To check this out, go to Configure >> Adapters..., select the LV Adapter in the listbox, then click the Configure button. In the second dialog, change the run-time server option to "LabVIEW".
2) Are you actually trying to build the Assemble Test VIs for Runtime Distribution tool into an application? (This is not an intended use of the tool's VIs).
3) Before running the assembly tool, have you tried using the Sequence Editor's File >> Unload All Modules option?
Let me know if you have tried the above things or if you are doing any of the "unintended" things with the tool so I can get a better grasp of when it is you are seeing the problem. Again, the goal would be for us to reproduce it.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

I game online and have problems with games working after updating firefox. I use an older version but am concerned about security. Two questions: can I be sure that Firefox 4 will work on my system (vista) and where do I save the file at?

I have had a problem with the compatibility of Firefox running with the games I play online. I don't want to attempt an upgrade again, only to have to turn around and degrade so my activities can work. Furthermore, I'm not sure where to save the Firefox file in my system, since for some reason it doesn't take me right to where it should save.

This issue can be caused by the Yahoo! Toolbar extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Strange Problem with Mail & Address Book

Hi,
I'm having a strange problem with Mail & Address Book.
When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
I get this log from console;
2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
If I quit Address Book, i'll get this from console;
2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
Can somebody help!!!
Please?!

Hi dp13.
Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/Address Book Plug-Ins/
~/Library/Address Book Plug-Ins/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

HT1338 I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem

The Ask Toolbar is causing that in the Firefox 3.6.13 version. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.

How to find working workingDirectory on run time

How can I see my working Direcftory at run time.

Are you trying to get the working directory on the server side or the client side?
As Fabrizio mentioned, you can use WebUtil, but this would return the client side information. To obtain the server side details, you can use imported java. Fortunately, because the server side jvm already has everything you need to do this, there is no need to know how to code in java. Refer to the Forms Java Importer documentation for details:
http://www.oracle.com/webapps/online-help/forms/10g/topics/java_importer/c_javaimporter.html
All you need to do is import the following java packages into your form:
java.lang.System
java.lang.Exception
Then add some pl/sql similar to this to your form:
PROCEDURE java_call IS
     jo     ora_java.jobject;
     rv     ora_java.jobject;
     ex     ora_java.jobject;
Begin
-- Get server side working directory.
-- This is the same value which is set in formsweb.cfg
     MESSAGE (SYSTEM.getProperty('user.dir'));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
          message('Unable to call out to Java, ' || ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
          ex := ORA_JAVA.LAST_EXCEPTION;
          message (Exception_.toString(ex));
END;Once imported, you will have easy access to a variety of server side (Java) properties which can return valuable information. Refer to the following:
Link: [http://java.sun.com/j2se/1.4.2/docs/api/java/lang/System.html#getProperties()]

I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. Is there a place I can download Apple Works 6 onto my computer?

I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?

AppleWorks has never been available for legal download.
Have you done the usual trouble shooting steps:
Quit AppleWorks
Delete most or all of the Recent Items list.
Remove the Preferences files to the Desktop or to the Trash.
Launch AppleWorks to see if the problems remain.
You'll find Recent Items in:
username > Documents > AppleWorks User Documents > Starting Points > Recent Items
There are several preferences files.
Go to:
username > Library > Preferences
Locate, select and delete the file com.apple.appleworks.plist
Still in the Preferences floder, locate and open the folder AppleWorks.
Select and delete the two Cache files and the Preferences file.
Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
Regards,
Barry

Problems with sources of supply determination for external requirements.

Hi gurus...
My scenario is SRM Classic Extended.
We have a problems with sources of supply determination for external
requirements comes from ECC. The shopping cart is created with successful
based in the purchase requisition at ECC, but when i try to make the
determination of sources of supply the system doesnt find any source of
supply.
There are a lot sources of supply creates for these parameters. The
contracts were already replicated to ECC.
This problem only occurs with external requirements comes from ECC, if i
created a shopping cart directly at SRM, using the same parameters, the
system propose the sources of supply correctly.
Is there something that we can do?? This is the normal comportment for the souces of supply?
Tks,
Gustavo Nogueira

Hello Gustavo Nogueira
Then it is an issue.
How are you searching the source of supply in sourcing cockpit.
Can you replicate the issue?
Let me know step by step,
as per standard SAP , source of supply data must be available for shopping carts so that buyer can assign the source of supply.
please share what source of supply you have there .

Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Problem with MP3 audio books - truncating

My shuffle is truncating the end of each part (track?) of my MP3 audio books. It loses the last one or two sentences. Is there something I can do to fix this?
I'm using the OverDrive Media Console to borrow books from the library. I have no problem with WMA format books (they appear as audiobooks in the shuffle listing). The MP3 books show up as "Music".
I'm manually managing music, which is required to transfer audio from OverDrive to my shuffle.
MC754LL/A iPod shuffle 2 GB
Model A1373
software version is 1.0.1

I use "My Media Mall" (http://www.mymediamall.net) to check out audio books from the library. They come in 2 formats - mp3 & WMA. When I check out a book it downloads to OverDrive Media Console. Then in OverDrive I transfer the book to my shuffle (through the manually mange the storage option). If I then start itunes, I can see what's been downloaded and what all the properties are. By default WMA books are loaded as audiobooks and there is an automatic play list created. The mp3 books are loaded, by default, into the music section.
Per your original suggestion, I converted the "music" attribute to an "audiobook" attribute, which automatically move the files and created a playlist for the book. It did not stop the truncation problem. I then converted the book back to music, and selected the "gapless album" feature. This has significantly reduced the amount of truncation so that it's gone from a couple of sentences to less than a full sentence.
If I listen to the book on my computer (windows) through itunes, there are no gaps, and no problem automatically finding the next part to play.
FYI - each audiobook is made of several parts (usually 8 - 11 for the books I listen to). Each part contains multiple chapters. Some books only break parts over a chapter break, others seem to divide the parts into semi-equal sizes. If in the shuffle I "skip to next track", it starts the next part. The voice-over feature on the shuffle announces each playlist (eg. book1, book2) and then each individual part (book1 part 01, book2 part 02, etc.). Usually when I start a book, I use the voice-over to find the playlist instead of locating a specific part. If I've been listening to the book via itunes, then I'll have to step through the playlist until the second portion where it lists the individual portions.
- Beth

Respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution

respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution

ajit5544 wrote:
.. my mac book pro 13, i shows question mark when i start up the laptop. ...
See here > http://support.apple.com/kb/TS2570

Problem with ejecution work book (determining run time)

Similar Messages

Maybe you are looking for