Work connect on iOS - notification issue
Hi all, I have an issue with the work connect nofitications on iOS. I need to be able to configure the app only to notify me on mails from a specific contact as I have to react only on that one during the night. I have deactivated the mail sounds within the work connect app and set the important contact as VIP, but the phone is still ringing on every received mail.....with an additional sound for the VIP.I assume that is not even possible at the moment.... But maybe the app could be changed to send only notifications for VIP´s to iOS and not for every received mail... Regards,Alex
For posterity: the problem seems to be that I hadn't enabled netcfg@<networkprofile>.service with systemd. I had only enabled my wired profile. I.e. doing 'systemctl enable [email protected]' fixed it.
In short this was a failure to configure netcfg startup with systemd. But hey, that makes it (drum roll...) a sysytemd issue! Like most of the problems one encounters while setting up a computer; it is a configuration issue (i.e. PEBKAC). But hey, thats what the forums are for.
@Trilby, @WonderWoofy Thank you both for your insightful, constructive and, above all, helpful comments. I hope everyone else coming to this thread for information on why their wifi won't start will find them every bit as useful as I did.
Similar Messages
-
IOS notifications break when i enable Work Exchange
My iOS notifications have always worked perfectly well both displaying in the lock screen view and via popup but recently i have started activating my work MS exchange mail on my iphone at random times (to quickly check work email). The notifications will continue working for the next couple of mails but then they stop entirely. If i disable the exchange account i'll still receive no notifications from my other imap/pop accounts. I'll only hear a beep or feel a buzz indicating that a mail or notification has occurred but the screen stays dark. It seems like a bug to me. Is anyone else aware of this?
This is intended behavior. Missed calls appear when the phone rang and you "missed" the call. When you aren't connected, you don't receive the call so it is not a "missed" call. You will only receive a notification if there is a message in your voicemail once the phone comes back online.
-
How can I set up notification traffic to work iPhone five iOS 7.1
How can I set up notification traffic to work iPhone five iOS 7.1
You need the first Internet connection in order to share another connection with the other devices. If you use the Mac and Internet Sharing, then the connection is only going to be as fast as that connection and maybe a little slower since you are all sharing that connection.
You can't make a silk purse out of a sow's ear as the saying goes, you cannot speed up the connection by any magical means.
You should be able to use the personal hotspot feature on the phone if the carriers there support it.
http://support.apple.com/kb/ht4517
You might want to look into a MIFI hotspot as well but once again, you would need some sort of plan for it in New Zealand. -
After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?
After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?
for ipad,
if you go to settings-General
You can select between using the side switch to lock rotation or mute. If you select one mute, then the lock rotation icon will show up in the control center. If you select lock rotation, then the mute will show up. THe side switch is then used for the other option. -
So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.Jeremy.Laurin,
have you tried agb76’s approach here? -
Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7
Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7
I have the exact same problem you have? I can occasionally getpushnotification, but only once a day fore facebook. For twitter, I get nothing and newer got. Other programs never got any notification att all.Push notification is on both under notification center and the respective programs.I have iOS 5.0.1 on iPhone 4S.
-
My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please
Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s, my 4s can't find any other bluetooth device, I think the problem ls with apple?
-
Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks
If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.
-
i have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???
Try going to settings/general/reset/reset network settings and do that
-
Is Apple working to fix the iOS 6 issues?
Is Apple working to fix the iOS 6 issues...it is killing my iPhone and iPad battery life?
We Apple users are not allowed to speculate in the Apple Support Community about actions Apple might or might not take in the future.
Here are some battery conservation tips:
iPhone: iPhone
iPad: iPad -
Email notification issue in some schemas
Hi,
My problem is almost identical as here DBMS_SCHEDULER send email notification issue
One privileged scheduler user - user1 receive email notifications while two another (user2, user3) no.
More plot is below i know 'what' resolve the problem but don't know how to do it :-)
I want to execute code below on user3 schema, we tried this successfully on user2 (code executed directly on schema with temporary sys.dbms_aq access) so he receive his notifications.
Problem is - we do not have direct access to second account (user3) how to execute this code as user3 ?
declare
reginfo1 sys.aq$_reg_info;
reginfolist sys.aq$_reg_info_list;
begin
reginfo1 := sys.aq$_reg_info('SYS.SCHEDULER$_EVENT_QUEUE:SCHED$_AGT2$_X',
1,
'plsql://SYS.SCHEDULER$_JOB_EVENT_HANDLER',
null);
reginfolist := sys.aq$_reg_info_list(reginfo1);
dbms_aq.register(reginfolist, 1);
end;
Already tried create procedure on user3 and execute immediate annonymous block but it still register with USER# 1 not 3 in DBA_QUEUE_SUBSCRIBERS.
More detailed plot:
Jobs for user2 and user3 was created by user1, so JOB_CREATOR was user1 but OWNER was user2 or user3.
We started with notifications configuration witch was ended with error on both user2 and user3 accounts:
ORA-24093: AQ agent SCHED$_AGT2$_XX not granted privileges of database user1
W get rid wit this using
dbms_aqadm.enable_db_access(SCHED$_AGT2$_2, user1);
dbms_aqadm.enable_db_access(SCHED$_AGT2$_3, user1);
So user1 get privilege on agents for user2 and user3
I believe error was already there because DBMS_SCHEDULER.add_job_email_notification is more automatic it probably registered subscriber that belongs to user2 and user3 with wrong USER# ID that belongs to user1.
Database is 11.2.0.3it doesn't work because notifications are set from user1 account so USER# is still 1 even when I removed record first.
This is my aproach based on Ask Tom: On Becoming Others, Limits, and Restoration
>sqlplus user1
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
SQL> grant execute on sys.dbms_aq to user1;
Grant succeeded.
SQL> alter user user3 grant connect through user1;
User altered.
SQL> connect user1[user3]
Enter password:
Connected.
SQL> create or replace procedure sched_not_add_q as
2 reginfo1 sys.aq$_reg_info;
3 reginfolist sys.aq$_reg_info_list;
4 begin
5 reginfo1 := sys.aq$_reg_info('SYS.SCHEDULER$_EVENT_QUEUE:SCHED$_AGT2$_3',
6 1,
7 'plsql://SYS.SCHEDULER$_JOB_EVENT_HANDLER',
8 null);
9 reginfolist := sys.aq$_reg_info_list(reginfo1);
10 dbms_aq.register(reginfolist, 1);
11 end;
12 /
Procedure created.
SQL> exec sched_not_add_q;
PL/SQL procedure successfully completed.
SQL> drop procedure sched_not_add_q;
Procedure dropped.
SQL> connect user1
Connected.
SQL> revoke execute on sys.dbms_aq from user3;
Revoke succeeded.
SQL> alter user user3 revoke connect through user1;
User altered.
SQL> exit;
>
So it works now. -
Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
No network LAN-connection after iOS 5.1.1update
Today i tried to solve a big issue after updating my AppleTV's to 5.1.1 (actual version: AppleTV3,1_5.1_10A406e_Restore.ipsw). After updating my Apple TV´s, they could not connect to the Apple activation server. No Home Sharing was adjustable and also logging in iTunesStore was not possible. The update I have done via LAN cable, and I changed nothing in my network configuration. The network (networkadress via DHCP) is indeed set up by default in the AppleTV automatically. Nevertheless, nothing went. Then I removed the network cable and made a reset of the AppleTV and tried to connect via Wi-Fi. With Wi-Fi, he finds the activation server and everything works as it should. Home Sharing, iTunes, streaming. However, once the network cable is plugged in and the Apple TV is restarted, it is again not possible to get access the iTunesStore. Home Sharing is not possible. The networkcable are fine. Both MacBook, as well as my TVs have internet connection over the same network cable. If I unplug the network cable from the AppleTV again, anything goes. Only via WLAN, but it's just too slow to stream data from my Mac. I have this "strange behavior" on 3 AppleTV 3.Gen., which are in the apartment. The previous iOS-Version on the same network cables, worked great. Can anyone reproduce the problem? Or have I now 3 bricked devices? I tried to downgrade over itunes. But this is not possible anymore. I installed 3 times the update. But nothing goes. Please can anybody help me.
I found another link titled "Apple TV Death after update" and found several links that have proven to work to restore to the previous version. Here is my post:
"I had originally replied to a post titled "No network LAN-connection after iOS 5.1.1 update". That has been my issue after updating to 5.1. Wirless worked for me but iTunes match and Podcasts were slow to respond. I finally downgraded to the previous version (5.0.2). So far, my ATV3 has been operating exactly as it did out of the box. No more activation failed message, and all components of ATV are functioning flawlessly on my whole home LAN network.
I also wonder what Apple was thinking for releasing this update without adaquate testing. I can forgive them for Maps, but not this. ATV has been around long enough for all of the kinks to be worked out and any updates to just plain work. I did like the new menu displays in apps and how you could rearrange the program icons on the home screen.
Perhaps they will get it right. Some day. But until they show proof that any future updates are correct and provide detailed instructions on how to revert back to a previous version, I will be very leary of updating. Spending a week reading message boards on how to do a simple resotre is not my idea of how to spend my weekends.
As a side note, I am a PC, so to restore from an .ispw file located on your system, you must press the Alt & Shift keys togather, then click the Restore button, and a window will pop-up so you can select the location for the restore file."
Directions to restore:
"Yes you can. I am a PC. Download the .ipsw file and save to your desktop. Unplug the LAN, HDMI and power cable. Connect the usb cable from your laptop to the ATV. If iTunes does not automatically launch, start it. After iTunes is running, plug in the power cable to the ATV. iTunes will recognize the ATV and will open the restore window in iTunes.
Press the Alt and Shift keys togather, then click on the Restore button. A file window will open so you can navigate to the desktop (or where ever you saved the file). Select the AppleTV3,1_5.-.2_9B830_Restore.ipsw file. iTunes will start the restore process.
When you see the message that it has completed the restore, unplug the usb cable and power cable. Reconnect the LAN and HDMI cable then plug in the Power cable in that sequence.
Follow the setup procedure again and all should be as it was before." -
A box asking me to connect to push notifications keeps repopulating
When I open an ap a box asking me to connect to push notifications keeps repopulating and will not stop any ideas on how to make it stop, I tried to restore the iPad , a hard reset, deleted and restored the ap nothing seems to work
iPad 2 Wi-Fi + 3G, iOS 6Turn off wifi or go under settings-wifi-ask to join networks off.
Siri works over 3G, you don't need wifi. -
Overnight my iOS devices (iPad 1, mini, iPhones 5 and 4) are struggling with my wifi network (BT HomeHub 3 with various extenders around the home).
It will show as connected but then not allow an internet connection. (e.g. on Twitter it won't download anymore tweets). Whilst in safari, trying to access a website a box appears asking for a username and password (almost as if you are logging in to a private network) even for sites where no such exists or I have been asked for one before.
This is very perplexing. It does not seem to be the router, even by turning Homehub off and on again, it still persists. Yet, it doesn't happen all the time, sometimes I can access apps, safari at the same point in the house fine, then next minute it won't work.
There seems to be no trigger to this... I've not updated my devices with new iOS and as far as I'm aware there has been no BT update...
Any advice welcome.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Best Wireless Router For British Telecom Connection...?
Can anybody recommend/advise on the best wireless router to suit an Apple Macbook? TIA
-
Well today I downloaded some new updates but ever since I did that my Ipod won't show up on Itunes also The songs I downloaded on Itunes won't show up and the album artwork is mixed up
-
ITunes doesn't recognise iPhone after switching back from Windows 7
Hi all, I've searched Google and this message board for this issue, but haven't found any mention of it. Here's the problem: I have Windows 7 installed on a boot camp partition. Any time I switch into Windows 7 and then back to Mac OS X (latest versi
-
I have Studio 8 installed in the computer lab. There are no problems with running with Dreamweaver and Flash as member of Administrators, but if I login as a regular user I can only run Dreamweaver. Flash tries to run an installer and then give me th
-
Does Lion server default with mail gray graylist?
Does Lion Server by default enable mail graylistsing? This was a problem for me with Snow Leopard Server, Will I have to disable it again, or is it no longer and option with Lion Server? If I do need to disable graylisting, would I take the same step