Work flow suggestions?

I am currently editing a bunch of music videos for a client on my Quad G5 (non-Intel) system with a Blackmagic HD extreme card.
The files are h.264 1920x1080 23.98 16bit 48k audio. (Canon DSLR)  I take them into mpegstream and convert to Apple ProRes and have no problems editing them in real-time.  The problem comes when I try and add most effects.  I get the error message that the files are too large to render with my present software and graphics card.
The obvious solution is to buy a new computer but don't have the funds.  The final output are youtube files h.264 1280x720 23.98.  Would it be better to convert them to this format and edit and would it allow me to add some of the effects I cannot now?
Interesting enough, I can add some the same effects in Motion and bring them back into Final Cut in the animation codec...
Thanks all.

Jealous that I can't get a new Intel box... Not enough work for me in Sin City.
Mark Spencer rocks by the by...
If you all never had a chance to see his tutorials, goggle him!
I will try in out in morning.
Thanks Shane,

Similar Messages

  • IPhoto Work Flow Suggestions

    When I need to edit a photo in iPhoto what is the proper order?
    I usually crop first then look at using the editing tools to adjust levels, exposure etc but is there a proper work flow to get the best out of the adjustments? Do you just work your way down each slider control in a top down order?
    I've always been a little confused how the adjustments for levels in the histogram interact with the exposure, contrast and brightness sliders. If you adjust the levels then when you move the exposure slider that affects the levels again.
    Thanks for any advice.
    Kelvin

    I don't know if there is a right order or not in iPhoto. In general when editing it is often suggested that sharpening be the last thing you apply, so I tend to make that my last adjustment.
    My own work flow is I usually first try an "enhance" on the photo and see what iPhoto wants to do. Often this gets my in the ballpark and I adjust from there, usually toning down some of the exposure and shadow adjustments as iPhoto tends to crank them a little far for my own tastes.
    But sometimes iPhoto fails miserably and I just edit myself and I don't usually use all the adjustments.
    I then crop and/or straighten if needed.
    I tend to keep my editing simple and don't go nuts on all the sliders. It is easy to get carried away.
    Patrick

  • Work Flow - Suggestions, tutorials, or Books

    Hello All,
    I've been teaching myself AE, as well as Ps, Ai, and Pre Pro. (Creative Suite 4) 
    I'm somewhat comfortable with a couple of the applications but by no  means a master of any.  However, I think that its takes me too long to  do some things, and I believe that I have encounter some problems  because of my work flow and probably could have avoided them if I had  formal training.
    It could also be that I don't have a  frame of reference and don't know how long things actually take, and to  me, I just feel like I'm moving slow.  I have been surprised to find  out that a particular music video or special effect that I saw took a  TEAM of people, a MONTH(s) to create.
    For those  of you who have gone to school and learned AE (or the other programs)  with an instructor and a planned course, do you think you would have  grasped the program(s) and how to make your creative ideas come to life  on screen as easily if you had not gone to school and learned on your  own?
    Now that I am learning a 3D program (Blender) and will  be trying to incorporate AE, Premiere Pro, Photoshop, Illustrator and  Blender all together, when needed, and I was wondering if there is any  book that deals with the proper workflow. Or is just doing the tutorials  and building up knowledge/skills the way.  Practice makes perfect but  does practice make efficient?  And  I haven't even gotten into the  scripts or expressions YET.
    In buying the Creative Suite I had visions of making  MOVIES/videos with all the special effects, flashing lights,  disappearing acts, etc...   and since all these applications came  together in the Creative Suite- its ment for and possible for a person  to do ALL things, by him or herself,  --maybe my thinking is wrong and  one should specialize and get with a team.
    Is it that  when one is trying to create a certain effect or look, knowing each  application and its abilities would sort of guide you to the correct  work flow??  But until you know these applications -- Very Well--, its a  lot like stumbling in the dark and trying out different blending modes.
    Is there a book that lays out the proper or most efficient workflow.  I  have been reading several booking on AE and also some on Pr Ps and Ai  and doing tutorials on line, and learning Blender on line at  CreativeCow.net  but the books don't teach workflow.
    Thanks in Advance

    One unfortunate side-effect of the Production Premium package is that it's one serial# that is designed to be for one user and therefore some have made the leap to the conclusion that one person can be an expert in all those applications...I think it's 11 apps (depending on where you draw the line on what's an app and what's a utility, etc.)  I've actually seen a couple job descriptions in corporate environments written around the contents of the Production Premium software compilation. 
    ...'workflow' is a pretty deep topic that is hard to learn in abstract.  It's also so wildly variable and evolving so fast that codifying it is pointless.  I started an HD post production book for Focal Press some years ago, but abandoned it as a lack of cooperation and transparency from manufacturers and the sheer velocity of development on all fronts...computers, codecs, displays, cameras...just prevented anything from being complete and timely.
    Unfortunately the internet has spawned the idea that if enough of us with 20, 30, or 40 years experience just keep brain-dumping into cyber-space, eventually anybody will be able to somehow 'proxy' all that experience through 3 days of intense Googling.  It just doesn't work that way.
    Like most of us, you'll need some time in the chair to be able to really get a handle on what you need to plan for and prioritize as workflow is really specific to everyone's specific circumstances. 
    You'll have to start with specific questions, and get specific answers, start to accumulate the answers until they start to connect...then the Googling helps to fill in some gaps...practical experience refines your ideas on what really works and what doesn't, you add that to what you know about your tools...suddenly you're an expert. 
    ...and usually, the decades it takes to get there fly by pretty quickly.  I have no idea what happened to the last 25 years.

  • Suggest  work flow Engine !!

    I need to develop a web portal that uses Jsp - struts - Ajax .. I need a work flow engine written in java so that i can prepare work flow through that and use it in my web site . Suggest solution

    Yes, Ant is written in Java. It's not designed as a workflow engine, it's a build tool. But I've heard of a fair few people using it as a workflow engine. You'd have to write custom tasks for it, obviously. I don't know the details, but I bet Google does

  • Screen output without connection to user - Work flow

    Hi,
    i  have created a workflow, it has a task which refers to a method which call a BDC in N mode, but workitem is not generating, in event trace showing RFC status 'Screen output without connection to user'.
    Same time i observed in ST22 for any dumps, as it is giving this error 'DYNPRO_SEND_IN_BACKGROUND'.
    Please suggest how to solve. Thanks in advance.
    BR,
    Rajani

    Hi  Vijay shah /Rick Bakker ,
    As i am on leave from last 2 days, sorry for delay in response.
    As the work flow tasks and what ever the methods i developed are working as per requried.
    But  after each step by step analysis i founn every usefull information regarding the background type activity options.
    Solution :
    In background type activity step, in details tab  we have option of ->Advance With Immediate Dialog flag is set to X, due to this system checking for user interaction.
    Because of this its creating problem.  After unmarking the falg i am able to execute the task in background successfully
    with out any problem.
    Once again sorry for delay in reponse 
    BR,
    Rajani

  • Approval work flow in 11g

    Hi All,
    I am a new bie to OIM 11g. I have created aapproval work flow and it is working fine.
    Now the requirement is to check for a certain flag and based on the falg value we need to route the request to approvers.
    If the flag value is "true" we need to route to the first level Approval. If it is "false" we need to skip the approval and the request should be rejected.The provisioning process also should be terminated.
    As far as I have tested if we skip all the approval tasks the status of the request will be updated to "Approve" by default. But according to our requirement we need to set the status to "Reject".
    Please suggest any way of implementing it or if any body has already implemented it.
    Thanks in advance.
    Thanks,
    PT

    If you are using OIM 11gR2 please refer the below document. All steps are very clear with the screenshots.
    http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/request.htm#autoId27
    See section 21.3.5.7 Configuring the Human Task and BPEL Mappings
    Also see this OBE tutorial for getting idea on Java embedding activity and assigning and retrieving data from global variables in SOA
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/Request_Workflow_for_Self_Registration/request_workflow_for_self_registration.htm

  • Work flow in production order

    Hi
    There is a requirement to trigger a mail to a specific user id whenever the order will be Created, confirmed & TECOed (may be they add other events later on). We can make it through standard production order workflow process I think. For that I have assigned user ID to object TS0020047 & TS20000623 (agents assignment ) through TX: COWf1. In the event linkage screen I have activated with events TS20000634 & TS20000634. Still It is not triggering any work flow to the workplace of assigned user id. Where is the mistake I am not able to identify.
    Or if there is any other method to achive this? Pls suggest
    Thanks
    Edited by: BNR on Feb 16, 2010 5:34 AM

    Hi
    In CO01 > Click on Go to > Missing Parts > Missing Part list
    In Nxt Page Click on List > Send to > Mail recipient
    In the Recipient tab enter SAP user id of MRP Controller and Recipient type SAP Log on name and click on Send icon at Top left.
    SAP Mail will go to MRP Controller SAP Work place in box.
    Regards
    Brahmaji

  • Work flow in waiting status

    Hi,
    we are using N step PO work flow for chagning the purchase orders.
    when the PO is changed and ordered workflow is going into WAITING status.
    It is not triggering the next steps at all.
    Could any one suggest how to proceed further?
    Thanks,
    Naresh

    Hi Daniel,
    It's wokring fine for all the PO'S.
    For only one specific PO we are facing this problem.
    Even If I try to change the same PO again it gives an error
    'Document being processed in background; try again later'
    Please suggest.
    Thanks,
    Naresh

  • Work Flow in HR for on line Approval of Over time

    Dear SAP Experts,
    Client requirement is for OT approval through SAP by three seperate heads.
    Do i need to develop the work flow for this or can be taken care through some other means in standard SAP
    Please suggest possible methods
    Thanks and regards
    Punit Sharma

    Hi,
    If approval has to be taken from different people u can either use notifications from one user to another or develop a workflow for the same.
    Regards
    Raghu

  • Urgent-work flow issue!!!

    Hi,
    How can i delete the work items from my work flow? plz suggest....
    Thanks in advance...
    Ramesh...

    Check these links..
    Re: DELETE workitems!
    http://help.sap.com/saphelp_nw04s/helpdata/en/f4/843239cb0211d1950d0000e82dec10/content.htm

  • Work flow in CRM 2007

    Hi,
    I want to implement some work flow related activities in CRM 2007. Can I implement this using Guided Procedures in CAF or workflow ? Which is the better way? pls suggest..
    Regards,
    Ajay

    Ajay,
    Your question is a little vague as you don't have a business scenario for your workflow related requirements.
    I will say that if the workflow process does not involve switching out of CRM and only involves steps in CRM, then traditional workflow will work fine.  If you need to do something where the steps involve multiple systems then guided procedures would be a better solution.
    Perhaps if you share more of your scenario you will get some better ideas on how to go about it.
    Take care,
    Stephen

  • Plz give me work flow of film editing in Final Cut Pro..

    Hello Everyone...
    I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro .
    I want know the work flow of film editing in Final Cut Pro. I am very interested to do film editing in FCP but the workflow from Avid to FCP its totally different.
    I tried few options like using FCP & Cinema Tools..
    1. Captured 25fps clips and cofirmed to 24fps in cinematools.
    2. In FCP the Timeline frame rate is 24fps
    But I am not able to understand..
    1. What is Database?
    2. Cant we capture 24fps in FCP?
    3. How to Synchronize captured clips with Cinema Tools database?
    4. How to link the captured clips in to Cinema Tools database?
    5. Where do I enter the KN Start & KN End?
    6. What about Pull List & Cut List?
    Please give me the details of film technics in Final Cut Pro....
    Thanks in advance....

    I knew I'd find this same post here. That makes three versions of trhe same list of questions.
    Posting three times here implies you have posted this set of questions in many other FCP forums around the Net. If that is so, do us all the kindness of returning to all of them and closing them. Include the suggestions you have received and the solutions that were successful for you. That way your multiple threads will show up on search inquiries when other confused FCP newbies try to start complex film projects.
    It's a bummer you cannot find these answers in the FCP manuals, I'm usre you looked there first. But, since we run on volunteers around here, it may be several days before someone with enough practical CinemaTools experience can stop by and handle them for you. Please have some patience.
    bogiesan

  • Mail error in work flow

    Hi Experts,
               I have a requirment in work flow.
    When creating/changing a PO , a mail is automaticaly sending for approval , which contains the line item details. If the total of line item is in USD it has to convert into CAD .But the conversion is not proper.But I am not able to trace the mail or not able to find out where is the logic of conversion.Can any one suggest me to proceed further.
    I am not able to find any logic in the work flow overview.
    Regards,
    Sreeja

    if you know which workflow is executed in this process,go to swdd and check there

  • Problem in work flow Rule 157

    Hello experts ,
    Created organization
    Company
      Hod of department    user-mgr01                        -- level 1
                             Manager             user-mgr03          level 2
                                         Employee 01        user-Emp01      level 3
                                  Employee 02        user-emp02       level 3
                                             Employee 03        user-emp03       level 3
    In work flow I put two decision Step
    1 for manager approval    here I used rule  00000168.
    2 for hod approval           here I used rule 00000157.
    After manager approved  workitem should go to hod . this my scenario
    employee 03   Trigger the workflow based on the rule 00000168 workitem will go to  manager
    It's working fine .
    After manager approved
    Next decision step will executed
    Work Item should go to superior of ( Manager ) that is  Hod of department, here I am using  rule 157.
    but it would go to manager. 
    How to solve .
    Regards
    Krishnan R.

    Hi
    Thanks for response .
    here  we should not  assign any hard coded values like position id, organisation id . but the workitem will go to his superior based on the organisation structure .
    i did small mistake ,ok it is working in workflow . when i run the workflow seperately
    i am executing the workflow through web dynpro abap ,
    it getting started and working fine upto manager approvel .
    but HOD approval decision step was not executed .here ( i am using rule 157 )  after approved manager .
    but i specific organisation id instead of using rule 157 in HOD approver decision step of workflow .
    it is working in uwl . 
    i want to use rule 157 in decision step of HOD  
    but it is not working in UWL .  what should i change
    Please give  suggestion
    Thanks and Regards
    Krishnan R .

  • Need doc on Message Control idoc work flow

    Hi,
           Can anyone give me step by step doc on Idoc related workflows. I have been assigned task on idoc related work flows i have no idea on idoc related wf.So plz suggest me a material.
    Thanks,
    Hari

    Check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4af23453d11d189430000e829fbbd/frameset.htm
    Thanks
    Arghadip

Maybe you are looking for