Work flow in production order

Hi
There is a requirement to trigger a mail to a specific user id whenever the order will be Created, confirmed & TECOed (may be they add other events later on). We can make it through standard production order workflow process I think. For that I have assigned user ID to object TS0020047 & TS20000623 (agents assignment ) through TX: COWf1. In the event linkage screen I have activated with events TS20000634 & TS20000634. Still It is not triggering any work flow to the workplace of assigned user id. Where is the mistake I am not able to identify.
Or if there is any other method to achive this? Pls suggest
Thanks
Edited by: BNR on Feb 16, 2010 5:34 AM

Hi
In CO01 > Click on Go to > Missing Parts > Missing Part list
In Nxt Page Click on List > Send to > Mail recipient
In the Recipient tab enter SAP user id of MRP Controller and Recipient type SAP Log on name and click on Send icon at Top left.
SAP Mail will go to MRP Controller SAP Work place in box.
Regards
Brahmaji

Similar Messages

  • All default routing value has to be changed, while changed the work center in production order

    Dear friends,
    our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
    Thanks&Regards
    Sabhapathy R

    Hi Rahul,
    Thanks for reply. I am maintained in diff value  maintained routing , Ex :First routing i have  work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
    second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
    Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
    Now I think you get to know what the client requirement, kindly do the need full.
    Regards,
    Sabhapathy R

  • Change Work Center during production order confirmation

    Dear All,
    I must to modeling this situation:
    I created an production order. In routing I used an work center A.
    After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
    The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
    My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
    Thank you for your answer!
    Regards,
    Marian

    once a Order is released, the Process order detaisl for that order is frozen.
    however if you want to do it, change the order status to CRTD after reversing the Movements done.
    Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
    if the change is long term.
    or
    Just manually add the new work center and do the processing. if the change is temporary.

  • Confirmation Control Work Flow  in Purchase Order

    Hi Gurus,
       Can anyone explain me about the Confirmation Control Tab Work Flow in Purchase Order.
       If i select the Conf. Control in Purchase Order, next what process has to follow?
       Thanks in Advance
    Regards,
    Prabhakaran M

    Hi Prabhakaran
    The Confirmation Control tab has a field for selecting the COnfirmaiton control Key for the PO Item. This key Determines which confirmation categories are expected for a PO item (e.g. order acknowledgment, shipping notification).
    There are four categories delivered in the standard system, which decides whether you need only a ASN for a PO Item, or ASN with a rough GR, or Rough GR only etc.
    Once you have this key set up, system expects you to create that document for this item before you process the GR or Invoice.
    You can also set up automatic ASN creation if you have EDI Integration with the vendor.
    Benefit of ASN is that you ve the confirmed delivery dates and quantities well in advance and warehouse/Inventory team can plan their operations accordingly in advance...
    I hope this clarifies your questions
    Regards
    Virender Singh

  • Document Flow to Production Orders from BOM

    Dear SAP Gurus,
    I have attached a few documents at header level of the BOM. I have also attached document at item level in the BOM. When I create a production order these documents are not flowing to Production Order. Is there any way to do that. I also want to see them in CS11 and CS12 reports.
    In OPKP I have already checked Document Links-BOM "On Creation" and "On Release" for my production scheduling profile.
    Thanks and Regards
    Geravine

    Dear Geravine,
    You can use a Production Scheduling profile to specify that in a production order or process order
    particular business transactions are carried out in parallel
    generation of document link from material master on order creation
    generation of document link from BOM on order creation
    generation of document link from material master on order release
    generation of document link from BOM on order release
    Include the check boxes for Document links for material and BOM both under order creation and order release.
    Check in T Code OPKP.
    But in my understanding only the document that are attached to the header and the items with D category alone gets
    transferred to the production order.
    Regards
    Mangalraj.S

  • Work Flow for Purchase Order

    Dear All,
    How to create Business Work Flow for Purchase Order Creation and it’s release process.
    I want to create purchase order and forward for release process. I want to done all this process through Work Flow.
    So can anybody guide me step-by-step guidance for Purchase order creates & release process through “SWDD”?
    Regards,
    Mahesh Wagh

    Hi Mahesh,
    See this link. It might help you.
    [https://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE%20PROCEDURE#RELEASEPROCEDURE-RELEASEPROCEDURE]
    Thanks&Regards,
    Manjula.S

  • Mass change of work center in production order

    Dear All,
    Is it possible to mass change work center in production order, i.e. i have around 100 production order of which i have to change the work ceter assigned in particular operation .
    Thanks and regards
    Manish

    Hi Manish,
    If you have not posted any activity or goods to the production order, then in header click on Functions -> Read PP Master Data.
    The order will now read the routing with the new work centers, provided the same has been changed.
    If you have posted some activities or goods movement done, then its a manual process.
    Hope the above answers your query.
    Regards,
    Vivek
    Added
    If in case you have posted some goods or confirmed some activity, check if you can reverse the same, re-read the routing & then post back the goods.
    Edited by: Vivek on Feb 24, 2009 12:22 PM

  • Work center wise production order infomation report

    Hi all,
    i have a requirement that workcenter wise (with date) production order information with quantity details (plan and actual).
    Eg: My production order quantity - 40 nos. (it takes 4 days to finish).
          i have three operation in production order.
          my order scheduled start date - todays date.
    In standard, when enter my first operation work center, system showing production order and its quantity (40 nos) . but i need to split that order quantity in report.. means on todays date for particular production order - order quantity = 10 nos.
    Clent want like that (with quantity break) report..
    Any standard report ???
    If customization.... How it can be mapped in SAP.??
    Thanks in advance

    Hi,
    You can use the FM COIS_SELECT_ORDER_DATA_READ.
    CALL FUNCTION 'COIS_SELECT_ORDER_DATA_READ'
          EXPORTING
            iv_prod_order_sel       = lv_prod_order_sel
            iv_proc_order_sel       = lv_proc_order_sel
            iv_planned_order_sel    = lv_planned_order_sel
            iv_rem_objects_only_sel = lv_rem_objects_only_sel
            is_objects_to_read      = ls_objects_to_read
            it_parameter            = lt_parameter  "General Structure for PARAMETERS and SELECT-OPTIONS
            it_status_hdr           = lt_status_hdr
            it_status_opr           = lt_status_opr
            it_status_cmp           = lt_status_cmp
          TABLES
            ct_ioheader             = lt_ioheader
            ct_ioitem               = lt_ioitem
            ct_iodocl               = lt_iodocl
            ct_ioopdocl             = lt_ioopdocl
            ct_iomamo               = lt_iomamo
            ct_ioconf               = lt_ioconf
            ct_ioopconf             = lt_ioopconf
            ct_iosoconf             = lt_iosoconf
            ct_iogomo               = lt_iogomo
            ct_ioopgomo             = lt_ioopgomo
            ct_iosogomo             = lt_iosogomo
            ct_iogmer               = lt_iogmer
            ct_ioopgmer             = lt_ioopgmer
            ct_iosogmer             = lt_iosogmer
            ct_iosequen             = lt_iosequen
            ct_iooper               = lt_iooper
            ct_iosoper              = lt_iosoper
            ct_ioopcomp             = lt_ioopcomp
            ct_iooppreq             = lt_iooppreq
            ct_iosopreq             = lt_iosopreq
            ct_iooppord             = lt_iooppord
            ct_iosopord             = lt_iosopord
            ct_ioopmst              = lt_ioopmst
            ct_ioopprt              = lt_ioopprt
            ct_ioopcap              = lt_ioopcap
            ct_ioopscap             = lt_ioopscap
            ct_iosocap              = lt_iosocap
            ct_iososcap             = lt_iososcap
            ct_ioopsccf             = lt_ioopsccf
            ct_iososccf             = lt_iososccf
            ct_ioprodlist           = lt_ioprodlist
            ct_iomatver             = lt_iomatver.
    This FM get data from the report used by transaction COOIS. If you needed the header data then you can use lt_ioheader table and seperate the data with the date. If you need at operation basis the you can use lt_iosoper table. You can use this FM to create custom report even with the checks like material availability, PRT availability, capacity requirement etc.
    Thanks and regards,
    Pradip
    Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
    Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
    Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
    Edited by: Pradip Ray on Aug 26, 2009 8:27 AM

  • How to manage work center in Production order

    Hi,
    I am producing a material having one operation (suppose cutting), which I have mentioned in the routing. I have also mentioned the work center in routing on which cutting operation will be performed. When I make the Production order of 1000 pcs there comes only one work center. But practically, they are producing these 1000 pcs on two different work centers ( 500 on one and 500 on second). How to manage this in SAP.
    Kindly help me.
    Thanks and Regards,
    Yogesh Singla

    Dear ,
    What is the individual capacacity of the Work Centre -CR02-Header -No of Individual Capacity ?
    I think you must be using similar kind of work centre of 2 no 1000 pc .Now , when you are creating routing for this , you should hit Required Spilliting in Routing Operation -Select Operation line item  and then Double click -Select Spilitting and enter splitting No 2.
    At the same time in CR02-Work Center -Capacity Tab -Hit the Header -In the Bottom of the Detail Capacity Header -Avaialabile Capacity -Include 2 as Number of Inidvidaul Capacity  and SAVE.
    Now based on thr required spilittinga and invidual caapcity , it will consider the Work Centre Load .
    Other wise , you can enter one more operation line in routing with similar Labor hrs , work center and control key in routung for production of 1000 pc  .
    Hope it clarifies
    Regards
    JH

  • Work flow for Sales Order

    Dear All,
    How a Work flow in SD to be configured .
    I need is to create  a workflow  in SD .whenever a Sales Order is created by some user.First the workflow will check if the sales order value is greater than Rs.50,000 or not.If yes it will go for the first level of approval to authority1
    By logging into the workflow the authority1 should know he has to approve that sales order.
    if not it simply sales order should be ready for Delivery otherwise itshould be blocked.
    If the sales order value is between Rs.50000 & Rs.100000  the approval has to go to authority2 approval in the workflow.
    Can anyone worked on the similar lines.
    I am waiting for the reply on this
    Regards
    AK

    Hi,
    Create a new "Z" table for storing the values with the below fields.
    Process Code
    Credit control area
    Customer Credit Group
    Customer Credit Group
    Credit Levels
    Net Value of the Sales Order in Document Currency(From)
    Net Value of the Sales Order in Document Currency(To)
    Position
    Position
    Position
    E-Mail Address
    E-Mail Address
    Credit Levels
    Billing block has to be assigned automatically once the order has been generated.
    The positions will be created by HR team.If the Sales order values falls with in this range,then a workflow will be triggered to three approvers whose values will be maintained in the table.A workflow will be triggered for these members.
    You can create value range for the credit levels.
    A Z program will be required for this requirement.
    Regards,
    Krishna.

  • Work center for Production order

    Hi,
    In my report I need to link the production order to work center. I have got all the information for the production order from AFKO, but I am unable to find a way to link it to the work center?
    Thanks
    Vamsi

    Hi Vamsi,
    Refer value AFKO-AUFPL, Use AFVC-AUFPL to fetch the operation details of an order. Fetch AFVC-ARBID for AFVC-AUFPL, use CRHD-ARBID to get Work center details.
    Regards,
    Prasobh.
    Award your marks, if this has helped you.

  • Work- flow blocked sales order

    Good evening to u all.
    I wanna know whether there is any standard work flow in SD for the blocked sales orders (For any sort of reason) ? So that the authorised users will receive an email once the sales order is blocked due to certain reasons.
    <removed by moderator>
    regards,
    satish
    Edited by: Mike Pokraka on Aug 4, 2008 10:45 AM

    Hi,
    I dont think that there would be any Standard workflow
    available that matches your requirement but surely you can
    create one workflow according to your requirement
    check the object 'SalesOrder' otherwise you could take a copy
    of that and create a method which fetches all the blocked
    sales order from the table and triggers a mail according to your
    requirement.
    Kind Regards
    Hari Sankar M

  • Work flow for Product

    Hello All,
    I have created some local products in CRM using commpr01.
    Now I want to have work flow associated with it.
    Means:I want to trigger WF for the Products before it can be used in Contracts.
    Please provide me input how to actiavte WF for this.
    Do we have any standard WF's associated with Products?
    any suggestions appreciated and rewarded with points.
    Thanks
    Arshad

    Hi Arshad,
    Check in below path.
    ==> Spro
    ==> Customer Relationship Management
    ==> Basic Functions
    ==> SAP Business Workflow
    ==> Perform Task-Specific Customizing
    Execute and check.
    Regards
    Narayana

  • Altenate work centers in production order

    Hi, we have 2 different work cneters and any one work center can be selected in the prod order when we process. please advise how to create a routing that will allow to enter 2 work centers for one operation (alternate to each other) so that when we craete order any one can be selected by the opeartor. please advise.

    Hi,
    In CA02 branch to the sequence view and create an alternative sequence, attach the sequence to the main sequence strating and ending at the operation you mentioned.  Enter one work center to the operation in main sequence, second work center in the alternative sequence. Users may confirm based on the situation by entering the sequence number and operation in confirmation.
    Regards.

  • Xstep work instruction in Production Order

    Hi,
    I am interested in setting up xstep to view documents assigned to FG and component & operations in PI sheet. Could any one reply me how to set xstep to show this?
    Regards

    Hello,
    Xstep instruction are execution of the production process and group and structure this information is in the form of modules.
    The steps followed to set up are explained in the below link:
    http://help.sap.com/saphelp_me52/helpdata/EN/46/f7effa78de2ecbe10000000a11466f/content.htm
    Hope the information is helpful.
    regards

Maybe you are looking for