Work from PS to AI

I moved 3 small figures from an AI poster to PS so I could used the tools to make parts of each figure slowly transparent. Copy>Paste back in AI had a white background surrounding the Images. Why is that there and how do I get rid of it? I removed isolation mode but couldn't use eraser or any other tool to delete it.
CS 4 Ai is VERY new to me.....................Thanks for the help...........mm

The opacity mask is a good way you can also do the opacity mask in Photoshop if you are positive of the way you want the gradient
and you can bring that into Illustrator without a clipping mask as either a transparent tiff (layered tiff) or a photoshop (.psd) file and the transparency
will be preserve.
The reason I suggest this way and it is only for certain occasions you might want to play with the edge and se the eraser tool in Photoshop as the OP was trying to do in Illustrator. Illustrators eraser tool does not work on raster images so keeping the image linked is a good way.
You can then edit the original and it will update in your Illy document, not quite a smart object which would be good but still a good work flow.
Just wanted the OP to have the option of doing this in Photoshop with the familiar tools, i do it both ways you wil find out for yourself which is best for which time.

Similar Messages

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

How can I transfer work from one computer to another?

How can I transfer work from one computer to another?

Welcome to the forum.
I can think of three basic ways to accomplish what you wish to do:
Use the Project Archiver to archive your Project (and check the box to gather the media files), to an external HDD. Probably the easiest way to do it.
Copy the Project and ALL media files to an external HDD, but be prepared to relink the media files to the Project, as the drive letter (part of the Absolute Path) will have changed.
Edit loosely, and Share to an AV file, which will be Imported into a New Project on that second computer. Or, edit VERY tightly, and do the same. I like the first, as removing, replacing Transitions, etc., can be much more difficult, unless that "tight edit" is 100% done.
Good luck,
Hunt
Message was edited by: Bill Hunt to correct formatting

I can't get Dr Browns Image Processor Pro to work from Bridge with Photoshop CC 2014

We use the wonderful DR Browns Image Processor Pro script a lot, but cannot get it to work from Bridge with PS CC 2014. When I select files in Bridge CC and then go to Tools> Dr Browns Services 2.3.1 > Image Processor Pro it just pops up an error message that says ReferenceError: photoshop is undefined.
The actual script works fine if I launch it from Photoshop CC 2014 - just not if I load it from Bridge CC.
I have unistalled it and re installed a few times, both manually and through the Extension Manager CC.
I am using a Win 7 64bit computer.
I assume there is some change in the scripting part that loads Photoshop from bridge but not sure. It worked fine in CC. Just not CC 2014.
I opened the Dr Browns Services .jsx file but don't see anything obvious. This is the section related to the Image Processor Pro part:
// This routine takes an array of files. If called by Photoshop,
// it will invoke Dr. Brown's Process 1-2-3 with the files. If called by
// any other app, it will send a BridgeTalk message to Photoshop
// to invoke this routine with the same arguments.
drbrownserv.process123 = function (files) {
// Bring Photoshop to the foreground.
BridgeTalk.bringToFront ("photoshop");
// Create a new BridgeTalk message for Photoshop to invoke
// Image Processor with the selected files
var btMessage = new BridgeTalk;
btMessage.target = "photoshop";
btMessage.body = "drbrownserv.process123 (" + files.toSource () + ");";
btMessage.send ();
} else {
photoshop.runActionCommand ('611736f0-9c46-11e0-aa82-0800200c9a66', files);
catch (error) {
if (error.number != 8007) // Don't report user cancelled errors.
drbrownserv.alert (error);

I copied that .jsx file to a new name "Xbytor Image Processor Pro.jsx" edit that file changed the string Dr Browns services to "Xbytor Image Processor Pro" then commented out all the code that added tools menu items but "Image Processor Pro" and I put that file into
"C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CC\Adobe Bridge" even though Bridge CC is 64Bit seems to use theat location.
Bridge CC was updated by the creative clouds update and opens Photoshop CC 2014 now

Can't Find Server at... error -- only one site, works from non-Macs fine

Greetings:
I have been getting a "Can't Find Server at www.teocommunications.com" error in Firefox for over a month now. I thought initially that it was a problem with the DNS entries and maybe the record had not proliferated though the DNS servers of my ISP or something of that nature. This is not the case.
I have tried to bring my site up in Safari and it yields the same result.
Did an nslookup, and everything resolves fine. Every once in awhile the site comes up on my Mac, but most of the time it gives the error. At all times, if you try to go to it from a Windows machine or my smart phone it works fine 100% if the time. My wife's Windows Vista machine with Firefox brings it up fine 100% of the time (she is on the very same network). I can get it to work for some reason if I totally reboot the Mac or reset the router (but the router is obviously not the problem)... it has to be something in the Mac OS (10.6 and 10.5) that is going on. I have eliminated all other possible problems. Curiously enough, it seems to also be a Leopard (not just Snow Leopard) issue... I can reproduce the error at my school (which is on a totally different network than my home) on the Mac Pro Intels they have which are still on Leopard.
I am on the latest version of Snow Leopard on a brand new Mac Mini.
This problem is only with my site (that I know of) but again it happens ONLY on Macs with Leopard or Snow Leopard. I am very annoyed by this problem and because it is my professional work site, it is imperative that I find the solution and soon.
Hope someone can help.
APPLE, please look into possible configuration or DNS issues in Leopard/Snow Leopard, as before I posted here, I did try several 'fixes' for issues like this for Firefox before I noticed that Safari was getting the same issue and ANY OTHER PLATFORM sees my page just fine!

Hi Guys:
It sometimes works from my Mac as well. I can get it to load if I reboot the Mac and then in a few reloads it is back to the same error.
I did try openDNS as well and it did not still load. I can pretty much guarantee that it is not the DNS records, it is something going on between my Mac (or the Pros at school). Other sites from my same host work fine, my domain is setup exactly the same. They do use ISPConfig... and it could be something with that program, but I can not seem to confirm any problems there.
I reset my router and the site is currently loading again on my Mac, but I can tell you it will be throwing the error in the very near future because that is one fix that worked before and it worked exactly two loads when I switched to a different wireless access point that is not my router.
SO, the fact that it loads one to up to twenty times on someone's Mac is not enough to reproduce the problem. It takes several reloads and then the problem magically re-appears. This is why the fact that it is working right now on my machine is not good enough to call it fixed.
Try to reload my site several times and see if it gives you the error.
I have (as I stated) tried a lot of what is being suggested here and re-tried it, but nothing fixes it for very long
I appreciate the help and hopefully we can figure out why the situation exists.
Thanks for the help so far and please feel free to keep suggesting ideas, but for reference I have tried:
1. modifying settings in Firefox (although it does not matter what browser I use,the result is always the same)
2. resetting the router and DSL modem
3. modifying the /etc/hosts file on my Mac
4. dscacheutil -flushcache
5. using openDNS instead of my ISP (which is AT&T)
6. removing the DNS settings and using the router settings
7. turning off airport and back on after 30 seconds
8. renewing my DHCP clients
9. Signning onto a different wireless access point (which is actually a new ISP that I am going with and so they are a totally different network and subnet).. they are setup all over town with wireless access. -- pretty cool actually.
None of this seems to fix the problem loading only my site. Since I do have access to the hosting provider (I work with them)... I have done some things on the hosting side too. All to no avail.

HT201412 Iphone 4S screen stops working from time to time

Iphone 4S screen stops working from time to time.
sometimes for a few seconds, or sometimes many hours.
I've resetted it when this happens, with no luck.
I've restored it from back up, and the problem still persists.
What can i do?

Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well.

Why am I being billed for equipment that never worked from the get go, and that your representatives admitted never connected to the computer on your end?

In September my husband and I were planning a cross country move and we thought that having a Jet Pack to go on line with while we were traveling would be a good idea. When we ordered it we told the representative that we did not need it until the 1st of Oct. as that was when we would be leaving. It arrived on our door on Sept 9th with the instructions to be sure and activate it within 2 weeks or we would lose the line. On the 19th we called in the activation and everything appeared fine. We hit the road on the 1st and Nothing, Na-Da, Zip, Zilch .... The equipment never worked from the get go! We called Verizon from the road on the 4th of Oct. to find out what was going on and the representative told us that the problem was with the computer on Verizon's end. We shut the equipment off for the rest of our trip and called for a refund on the 13th of Oct. We spoke to a representative named Juan, who again confirmed that it was Verizon's computer that had been the problem, and we were assured that all fee's associated with the Jet Pack would be waived as the equipment never worked in the 1st place. He told us all we needed to do was return the broken equipment and that he would send us a return label. We received the return label and sent the equipment back on the 22nd of Oct. On our next bill no credits of any kind had been applied? We promptly picked up the phone and called Verizon again, on Oct 31st, to find out what was going on? This time we spoke to Lou Ann. After about an hour and a half she finally managed to remove the fee's, or so we thought, and we hung up satisfied. On 11/5 our Nov. bill arrived again with no credits of any kind. We thought maybe the billing cycle hadn't had time to catch up with our most recent conversation so we called just to verify. This time we spoke to Moncheria. She did not understand what had happened and had to reenter the same refund that Lou Ann had earlier. Again another hour and a half on the phone. Today,11/28, we received our most recent bill and again no credits of any kind??? We picked up the phone and called again. This time we explained to Christian, (the above story), and she put us on the phone with her supervisor Carson. Carson proceeded to tell us that ALL of the previous representatives we had spoken to were wrong and that since we had not returned the equipment within 14 days of receiving it that we were beyond the limits of the refund policy, (which means we would have had to return it before we left on our trip), and the best she could do was offer us coupons for the future to offset THEIR mistake! No thank you I will keep my cash in my pocket!
1st of all we ordered it for the 1st of Oct. not for 9th of Sept.
Secondly we were told to be sure and activate it within 14 days or we would lose the line, never any mention of a refund time limit. (Who buys stuff anticipating an immediate refund?)
And 3d THE EQUIPMENT NEVER WORKED IN THE 1ST PLACE!!
Now Verizon is asking for $343.34 in fee's for something that never worked in the 1st place!! This is ridiculous and those fee's are defiantly under dispute! The way I see it trying to hold me to a contract that Verizon breached by sending out faulty equipment is just wrong!

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Can I Use My E Drive To Work From?

I only have a 40G internal HD with 19G headroom. I have a
250G external drive (USB). Can I use my external drive to maintain
and work from, or does DW require I use the C drive? Thanks!

All my sites are on my F: drive.
Walt
"Fugasi" <[email protected]> wrote in
message
news:g8g72i$k85$[email protected]..
>I only have a 40G internal HD with 19G headroom. I have a
250G external
>drive (USB). Can I use my external drive to maintain and
work from, or does
>DW require I use the C drive? Thanks!

[solved] Troubleshoot ssh with keys (works from LAN, not WAN)

I'm trying to set up ssh so that I can connect to my work computer from home. It is pretty much essential that I keep the work box as secure as possible at all times. (So I can't disable the firewall, come home and test it because IT would not be at all happy.)
I'm not sure if this is an Arch question, a Fedora question or a general Linux/networking question.
The work box is running Fedora 17. It has a firewall eerily like the "simple stateful firewall" described on Arch's wiki. It is running sshd. Public key authentication is enabled. No other form of authentication is enabled. It has a rule allowing ssh connections.
My laptop is running Arch. It has a firewall very like that described on the "simple stateful firewall" page. It has a couple of rules allowing stuff I need at home (printer and something I had to enable for the LAN).
Initially, I was given an internal ip address. I got this working fine i.e. I could ssh into the box from my laptop while sitting next to it in my office over the LAN. I'm using the default form of key pair generated on Arch (i.e. rsa) and am using gpg-agent with ssh support in lieu of ssh-agent to manage keys. Pin entry is using the qt front end as I'm on KDE. (I adapted KDE's config so that it starts gpg-agent with ssh support for the session so that I didn't end up with two instances.)
Once the firewall was in place and sshd was running, they gave me a public ip address. At this point, no port was opened in their firewall to allow WAN connections but I tested the public ip address from within the LAN and it once again worked fine.
Once I'd confirmed the machine could connect out after getting a public ip, they arranged for the port to be opened for ssh. However, I cannot connect to the machine from home.
$ ssh -vvi .ssh/id_rsa [email protected]
OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 22: Applying options for xxx.xxx.xxx.x
debug1: /etc/ssh/ssh_config line 32: Applying options for *
debug1: auto-mux: Trying existing master
debug1: Control socket "/home/username/.ssh/[email protected]:nn" does not exist
debug2: ssh_connect: needpriv 0
debug1: Connecting to xxx.xxx.xxx.x [xxx.xxx.xxx.x] port nn.
debug1: connect to address xxx.xxx.xxx.x port nn: Connection timed out
ssh: connect to host xxx.xxx.xxx.x port nn: Connection timed out
xxx.xxx.xxx.x is the public ip (works fine from LAN)
nn is the port number
username is my user name (same on both machines)
The options for the host from ssh_config are:
AddressFamily inet
Compression yes
ControlMaster auto
ControlPath ~/.ssh/socket-%r@%h:%p
and the only generic option applied to all hosts is just a line to insist on protocol 2 which I think is default now anyway but I followed the wiki and specified it to be sure.
What have I missed? My networking knowledge is pretty basic at best. (I got this far using Arch's wiki, Fedora's documentation and a little trial and error. That seemed to work well but now I've added google and still can't figure it out. All the hits I get concern cases where the LAN connection works but authentication fails over WAN. But I'm not getting that far - it looks like my work box doesn't respond at all...)
Last edited by cfr (2012-09-25 22:12:06)

So I discovered I'd also managed to kill off LAN access as well as the machine's ability to use any sort of DNS... (I did say it needed to be secure...)
Anyway, I fixed that, reestablished working ssh from LAN but still can't get it to work from WAN.
Question: if ShieldsUp! reports the port as stealthed does that mean that the port has not actually been opened? So the campus firewall is blocking the connection? Because if so, I'm knocking my head against a brick (fire)wall to no purpose whatsoever...
I figure it can't be the software firewall else I'd not be able to connect on the LAN. And it is a public ip address so there's no NAT translation required...

Dashboard link is not working from BI Publisher

Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.

Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
Hope you can help.
I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

How can I share the work iTunes with my home iTunes so I can work from home? Need to be able to share playlists and files for editing tracks.

I've just started working for a media company that provides the music for sporting events. They use iTunes to create playlists that I have to load into an IR machine with hot keys. I also have to edit tracks to create new stings and intros. As there is a 2.5 hour commute, I want to access the work iTunes library from my home MBP so I can work from home. When I'm at work I can share the work iTunes library, but when I'm back home I can't use it. Any ideas of how I could effectively Home Share over the internet with two seperate iTunes accounts?
The work iMac is running 10.7.5 and my MBP is 10.8.4

In that case, does anybody know of a program or workaround that will make this so?

How do i get air play to work from my macbook to apple tv

How do i get air play to work from my macbook to apple tv? It does work with some programs like itunes but I can't get it to work with safari.

apple tv does not work in safari. there is no web browsing capabilities on the apple tv..
however what you are probably referring to is mirroring? iPad 2 and iPhone 4s have mirroring capabilities, so what you have on the screen is exactly what would appear in the apple tv..
on ipad for example...ignore the settings page. Instead, go to the iPod controls. Double-press your home button to see the multitasking bar, showing all your recent apps. Swipe your finger from right to left for the mirroring icon; you'll see the AirPlay icon. Tap on that, select your Apple TV and toggle the mirror button to 'on'.

How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Work from PS to AI

Similar Messages

Maybe you are looking for