Work Item: Is it possible to re-execute a work item ?

Hello all,
Once a W.I. has completed, is it possible to re-execute it ?
Thanks.
José

Hi Rick,
Wel... at first, I was simply double-clicking on the WI in the Business WP and it seemed to me like it was not executing it but after some deeper analysis, I realized that I had a problem with my code and that it was actually re-executing it everytime I was doubli-clicking on it.
In conclusion, we can re-execute a WI as long as its status is not "Completed" i.e if the status is "Executed", we can re-execute it no problem.
José

Similar Messages

"Workflow Template Create" screen appears while executing the work item.

Hi,
I am learning the workflow. I have created a test workflow in which there is a user decision step and 2 mail sending steps for the outcomes of the user decision.The workflow is activated properly . When I excute the workflow the screen for "Workflow Template Create" opens everytime. When I go to the Business workpkace a mail is there in my inbox with the title as given in the user decision step. Again when i am trying to execute the work item in the inbox again the same screen for "Workflow Template create " is opening. I am totaly confused with this problem . Pls suggest what might be the reason..?

I think the Wflow Template Creation screen is not opening but your current session is getting closed so the previous session which is Wflow Create one which you have already opened is appearing. Please check your template design and act accordingly.
Thanks
Arghadip

Urgent - How to get a pop up after executing a work item?

Hi Gurus,
I am working on a PO Approval workflow which is designed to approve multilevel POs depending upon its amount.
Now the requirement is that I need to provide a pop up with list of second level approvers to the user immediately when the user executes the work item of first level approval in his/her SAP Inbox.
Waiting for responses ASAP. Let me know if scenario needs to be clarified in more depth.

Hi Shaurya
You can create a method to send a second workitem to the agent with a list of agents for the second level, and pass the selection back to your workflow container. Set the new task as "Advance with Dialog" and you should be fine.
Alternately you could set your new method as a secondary method AFTER workitem execution call, but don't forget to check the result of the first approval so the popup is only involed if they have approved the first step.
Regards

Error when executing a work item (cannot execute a method, biding problem?)

Hello,
I created a specific workflow, triggered by an event, from a class I also created.
From this event, I get some data about a Document (CV01/02/03N...).
The first step is a task which refer to a method (from the same class above).
The binding Task <=> Method is the data about the Document and the Workflow ID.
After I start the workflow, I execute the work item in SWI1, with a breakpoint in the method.
I can't go in debug, and the work item is in error (in Workflow log) :
- "Work item 000000590208: Object ZCL_SA3_WF_GED_RECL_FOURN method UPDATE_FID cannot be executed"
- "EXECUTE_METHOD_OBJECT_SYNC : Dereferencing of the NULL reference".
Note: The task is not in background processing, in the aim of debugging the source code.
I did SWU_OBUF and quit/relog SAP.
Do you have any ideas to solve this problem ?
I think it's a biding problem, because I can' t even go in debug mode...
Thanks.
Regards
(sap version: ECC 6.0)

Hi
Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
Regards
Pavan

Executing Batch work Item: Transaction brackets of the workflow has been da

Hi,
I am integrating workflow with the HR Processes and Forms using HCM.
The process is new hiring and in configuration I have given the workflow name which is copy of the standard workflow(WS18900008). The event used is draft_created.
When I execute the process and press the Save Draft, everything goes fine, the workflow gets completed but for the step Save Form Data(WS17900260) throws the following error:
Executing Batch work Item: Transaction brackets of the workflow has been damaged.
The task is TS17900108.
Not able to understand what is this error and to which it is related.
Pls help.

Look for SAP Notes as this is SAP standard code.
Short Text
Transaction brackets of the workflow has been damaged
Diagnosis
When executing the workflow with the ID , the transaction brackets were destroyed by a commit command ('C') or a rollback work command ('R'). This command ('') was stopped from the implementation program of the object type. Access takes place, for example, when a condition is evaluated or when the container operation is executed. Access may only have a read character which is why a commit or rollback work command is not necessary.
System Response
The system has written a log entry. Uncontrolled commit or rollback work commands can affect the restart function of the workflow system. This restart function is only necessary in the case of errors. The current workflow instance is executed further.
Procedure
Check the implementation program of the object types and remove the corresponding ABAP instructions.

MSS PORTAL - RUN TIME ERROR WHEN EXECUTING A WORK ITEM IN UWL

Hi all,
I've a requirement wherein I need to have a custom screen in place of 'standard user decision' task in the UWL of MSS portal. I've developed a custom screen with Approve and Reject buttons and it works fine if I execute the work item from SAP inbox whereas in portal (UWL), it gives a run time error stating,
Portal Runtime Error
An exception occurred while processing your request
Exception id: 10:56_12/05/08_0020_509163550.
I'm sure that this error is due to missing configuration between the dynpro and the Portal. All inputs in this regard will be of great help and will be valuable to me.
Thanks in advance,
Bharathi.

Hi
Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
Regards
Pavan

Is it possible to action an approval work item sent to Lotus Notes mail

Hi SRM Experts,
Just want to find out if its possible to action an approval work directly from a Lotus Notes email inbox without manaully logging into SRM.
I know this is possible using Microsft outlook.

Hello Joe,
Please check RBBP_NOTIFICATION_OFFAPP offline approval.
<a href="https://wiki.sdn.sap.com/wiki/display/SRM/functional_checks">https://wiki.sdn.sap.com/wiki/display/SRM/functional_checks</a>
Also check the SAP Note 986943 RBBP_NOTIFICATION_OFFAPP: # not allowed in Lotus Notes
Regards,
Masa

Is it possible to change the VBAP-ADRNR item address field value?

Hi,
Is it possible to update the VBAP-ADRNR item record field value?
I am trying to update this field value from BAPI_SALESORDER_CHANGE but it is not changing the value.
I am only able to change the corresponding address for that address number.
But I need to change the address number( I want to replace with header address number) itself.
If any ideas please let me know.
Thanks,
Mohan.

ajitabap wrote:
Hi
>
> Schedule Lines related Data USING BAPISDORDER_GETDETAILEDLIST Then Pass them to BAPI_SALESORDER_CHANGE Then It work and update the field.
>
> Regards
> AJIT
eh????
What's the relevance of schedule lines and ADRNR?
@OP: Don't. There is a reason why SAP gives out a new ADRNR. And manually changing the value of a primary/foreign key is never a good thing to do.

When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.

Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar.

Is It possible for a Non Shippable Inventory Item sold in OM update INVENTORY Levels

Is It possible for a Non Shippable Inventory Item sold in OM update INVENTORY Levels?
I have created an Item which is inventory tracked but not shippable. Customer & Internally Ordered. But upon booking the Sales Order, the INVENTORY level of the said item does not get updated with the sale.
How can i make it update INVENTORY without going thru shipping module?
thanks.

Hi Jay
How are you.
Yes, in process sampling only.
Is it not neccessary to have a wip validity rule for wip products in the specs. I am able to create samples for wip products with inventory validity rule.
Regards
Prem.

ICal Tasks/To Do Items Keep Disappearing, plus search function doesn't work

Ever since I upgraded my Mobile Me calendars about two or three weeks ago, which as I understand makes my calendars now LIVE on the Mobile Me cloud instead of directly on my computers, I have had nothing but trouble with iCal. I use Bento with iCal for my project management system — I use the iCal Tasks for my basic information, and I added extra fields in Bento for other details I like to track. Anyway, the upgrade completely unhinged where those two came together so that the basic information that Bento was getting from iCal no longer matched with the extra details.
But that's no longer my problem. I fixed that easily by completely changing the way I track things now — I did away with the extra fields and decided to have Bento work directly and only with the information in my iCal app.
Still, another problem came up, the one I need an answer to. New tasks I entered through Bento, wouldn't KEEP on iCal. They'd show up momentarily, but a day or two later, they would be gone.
I thought I fixed it a few days ago when I discovered that Time Zone Support wasn't checked on iCal. I made sure it was checked on all my computers AND on Mobile Me because I suspected that Tasks were disappearing every time my computers synced with Mobile Me. It seemed to work fine after making sure everything supported time zones. I even synced a few times, just to test it, checked all calendars at all places, and whatever Tasks or To Do Items I added from within Bento appeared to sync fine, appear at all the proper places, at all instances of the calendars, AND stay put.
BUT I just discovered tonight, that the new Tasks I entered in the last week for one of my calendars have ONCE AGAIN disappeared. For some reason, though, the new tasks I entered for another one of my calendars managed to stay put. I have no idea why one calendar was affected and another wasn't.
The point is, I can't for the life of me figure out why my newly entered Tasks keep disappearing. Is it an iCal thing? Is it Mobile Me? Is it because I am entering the tasks/to do items from within Bento? What?
And the icing on the cake? The search function on the iCal app on one of my computers no longer works. I will search for a task/to do item that I KNOW is there and can actually see on the side bar, but it will not pop up in the search results. I searched online about how to fix that, but none of the fixes work — many of them, I believe, are outdated and so can't work in my case.
Does anyone have any ideas how I can fix these issues?

with iTunes and the apple.com web site, you don't hit
the Magnifing glass, after typing out what your
searching for, you hit enter on the keyboard. The mag
glass (Atleast in windows) is just for decor showing
you its a search field, its not an actual button like
it would be in most Microsoft/Windows apps
Thanks. I thought the magnifying glass was a clickable icon.

HFR Issues - "5200: Error executing query: Invalid Item ID"

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

This was due to an invalid default Point of View for the user that was incompatible with the particular report.
Change the Preferences to User Point of View Preview and run the report again.
File > Preference > Financial Reporting > Select Preview "ON" under USer Point of View box.
Re-run the report and select the desired POV.
This will prompt the user to change their POV every time he or she opens a report. They can select the correct POV and the report runs correctly.
You can turn off later. Let me know if it fixed this issue.

HFR - 5200: Error executing query: Invalid Item ID

Hi All,
We are using Hyperion HFM application 11.1.1.3. Recently we have upgraded the Oralce Database to 11.2.0.2 and reconfigured the HFM application with this new database version. When I tried to run the Financial reporting through the HFR studio, I am getting error message - "5200: Error executing query: Invalid Item ID". Please could you help me to resolve this issue.
Thanks,
Aravindh K

Did anything change on the database side? Alias, member name? "Error executing query" usually is associated with a change in the database.
Regards
Celvin
http://www.orahyplabs.com

Work Item: Is it possible to re-execute a work item ?

Similar Messages

Maybe you are looking for