Work Manager both Global Work Managers & Application-scoped Work Managers

Hi all,
I want to use both Global Work Managers & Application-scoped Work Managers in my domain [single], is it possible?
Basically I want to make sure my domain have fix number of thread.
In my environment, I have multiple domains on a single machine, so I want to make sure every domain has fix number of threads to maintain the whole system integrity.
if I won't make sure this, there could be scenario that one particular domain is taking much of the CPU usages than others.
Thanks,
Qumar

Hello Fred,
Thank you very much for reply.
I totally agree with you but in my scenario, I have multiple domains on a single box.
and I am afraid that there could be a situation where one bad application of a particular domain may take most of the CPU usages.
What I can do is: I can define max thread constrain to all the applications of all the domains but it is not acceptable bcz we have hundreds of applications per domain.
So what I want is: to define some kind of thread constrain at the domain level [so that I can have CPU usages allocated to every domain] as well as some kind of thread constrain to few applications [non prioritize].
I tried this by defining Global Work Managers & Application-scoped Work Managers but I found that applications only respect to Application-scoped Work Managers.
or if I have some kind of way that make sure certain percentage of CPU usages is allocated to a particular domain?
hope I have made my self clear.
Thanks,
Qumar

Similar Messages

Defining application-scoped work manager in Plan.xml

I am having trouble getting my MDBs to recognize work managers that I have defined in my deployment plan using the admin console.
The work managers show up properly when I click the deployed application and go to the Deployments->myapp.ear->Configuration->Workload tab. They do not show up, however on the Deployments->myapp.ear->Monitoring->Workload tab.
Also, when the server boots, I get a log message like this:
<BEA-002919> <Unable to find a WorkManager with name FaxErrorQueue. Dispatch policy FaxErrorQueue will map to the default WorkManager for the application care360-backend-app-2008>even though FaxErrorQueue shows up under Configuration->Workload.
BACKGROUND
I am upgrading an 8.1 wls to 10MP1. Our MDBs are deployed as a single jar, included in 2 separate ears, which are deployed to 2 separate clusters. So, if we have 2 clusters with 2 managed servers in each cluster, we deploy each MDB to all 4 servers. We control the Execute Queues for each server in 8.1 with different values so that MDB#1 might have a single thread in one managed server and zero execute threads on another. Using the deployment plan is the only way I can think of to implement this. We would prefer not to use the 8.1 emulation, as the deprecated execution queues will have to be dealt with eventually. I am open to any other approaches to accomplish this as well.
Thanks,
Joe

Hello Fred,
Thank you very much for reply.
I totally agree with you but in my scenario, I have multiple domains on a single box.
and I am afraid that there could be a situation where one bad application of a particular domain may take most of the CPU usages.
What I can do is: I can define max thread constrain to all the applications of all the domains but it is not acceptable bcz we have hundreds of applications per domain.
So what I want is: to define some kind of thread constrain at the domain level [so that I can have CPU usages allocated to every domain] as well as some kind of thread constrain to few applications [non prioritize].
I tried this by defining Global Work Managers & Application-scoped Work Managers but I found that applications only respect to Application-scoped Work Managers.
or if I have some kind of way that make sure certain percentage of CPU usages is allocated to a particular domain?
hope I have made my self clear.
Thanks,
Qumar

Work Manager API in Sun Java Application Server 8.1

I am trying to build a parallel application using Work Manager api (javax.resource.spi.work.WorkManager;)
I studied the Websphere implementation of WorkManager there you need to make JNDI lookup for work manager and then use it to submit the work.
My question is if i make class which will implement the javax.resource.spi.work.WorkManager; interface and use that class to submit the work and execute it in parallel then will that class will handle the resource management and all j2ee services
Do we have separate implementation of work manager API for Sun Java Application Server 8.1 (any jar like asynch.jar in IBM websphere) so that we will just create a work manager using admin console and make JNDI lookup and use it
Please guide me

Before I start, disclaimer -- I have no knowledge of Hibernate and the following comments are based on the stack trace you have included.
I think your permissions might be set all right but you might have an error in the hibernate query. It looks like hibernate uses antlr to parse the queries. While parsing the query, antlr is encountering an exceptional condition and is trying to exit the VM (by calling System.exit()). Obviously, the hibernate code does not have that permission and therefore the exception is logged.
My guess is if you fix the query such that hibernate/antlr can parse it, you will not run into this error.
Hope this helps,

Application scoped WorkManager

We have an application (.ear) which has two web apps (war's). We want to setup workmanager with max-threads-constraint for both the application. I was able to create application scoped workmanager through deployment descriptors However, I was not able to set the thread count other than the default (-1).
Note: The application (.ear) is targeted to a cluster.
Here is the snippet of the workmanager that I created in the weblogic.xml
<wl-dispatch-policy>workmanager-app1</wl-dispatch-policy>
<work-manager>
<name>workmanager-app1</name>
<max-threads-constraint>
<name>max-app1-threads</name>
<count>30</count>
</max-threads-constraint>
</work-manager>
Please let me know if any thing is wrong in the work-manager configuration. Any pointers on this is highly appreciated.

I need a mechanism to limit one of the webapp to use not more than 30 threads and the second webapp not more than 10 threads while targetting to the same cluster.

Pros and Cons of Turning CE On or Managment Of Global Employees.

Hi Guys,
We have a requirement where we have to deal with the employees those holds two jobs, those can be in a different country or within the same country. We have a option to go with concurrent employment or we can go towards the old functionality of managment of global employees concept. My Question here is very specific to what are the pros and cons in both the scenarios. If some one can elaborate it a little or any documentation is available to compare both the plans.
Any answers would be highly appreciated. Thanks
Regards.

Hi Hassan,
We are currently working to implement Management of Global Employees (MGE).
Check out http://help.sap.com/saphelp_erp60_sp/helpdata/en/22/e15a287d14f74c853f4bf8ab5fd4b1/frameset.htm and http://help.sap.com/saphelp_erp60_sp/helpdata/en/a8/3300b1e299cd4c9fa78c8ad4aab007/frameset.htm
for details.
Remember, before implementing by activating CCURE GLEMP or CCURE MAINS, you must contact Michael Wulf at SAP via an OSS Note.
MGE is the functionality to handle various assignments between countries for employees so that the employee could be paid and/or have benefits in each country. It also enables additional infotypes to track the preparation and process of the global assignment.
Concurrent Employment (CE) is designed so that one individual can have multiple assignments within one country, with different pay rates, benefits, etc. Example is a school administrator who works 40 hours and then at night is an adjunct instructor for the school. If concurrent pay is activated, that individual could be processed in two different payrolls at different pay dates, but the system knows it is one person for taxes, SSN deductions, etc.
So really CE and MGE are two different functionalities to meet different requirements, but they each utilize the same foundation - the Person ID and an individual having more than one PERNR.
Paul

Initiall SharePoint Server 2013 setup -- unable to manage new User Profile Service Application

During initial farm setup, creating an initial User Profile Service Application works fine. However, once it's created, I cannot 'manage' it through the Manage Service Applications page in central
admin.
I get a generic error (Sorry, something went wrong / unexpected error) with a correlation ID that doesn't seem to match any ULS log entries. (Yes, I merged logs from all machines in the farm.)
A Windows event log entry says:
A failure was reported when trying to invoke a service application: Endpoint Failure
Also frequent errors in ULS logs: (see below)
UserProfileApplicationNotAvailableException
User Profile Application      Proxy failed to retrieve partitions from User Profile Application: Micro…
SPDistributedCache DataCacheException
I did notice that the file 'ProfileService.svc does not exist in SharePoint's web services app at the URL you see in the error. (below)
I also found it interesting that the event log error shows 1 active endpoint and 3 failed endpoints. I have 2 WFEs and 2 app servers. But I'm only trying to get the user profile service app running on the application
servers. I have deleted and recreated this service app several times under various names (deleted/recreated its app pool as well) and wonder if these other failed endpoints could be orphans from previous instances...
Any thoughts on how I might successfully create this service application? I've already been Binging my head against a wall long enough that I would have been better off reinstalling the entire farm... I may still
do that.
FYI, my farm came from a slipstreamed SP1 install package, and received the July CU after several other things were already configured, including the already-failed UP service application.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:11:54 PM
Event ID:      8313
Task Category:
Topology
Level:         Error
Keywords:
User:          xyz\sp_farm
Computer:      spapp1.xyz.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 4284
AppDomain Name: /LM/W3SVC/560632691/ROOT-1-130519915587486075
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:11:54.738080000Z" />
    <EventRecordID>14550</EventRecordID>
    <Correlation ActivityID="{02A1AC9C-1125-6026-E124-A52653003266}" />
    <Execution ProcessID="4284" ThreadID="16072" />
    <Channel>Application</Channel>
    <Computer>spapp1</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">w3wp</Data>
    <Data Name="int2">4284</Data>
    <Data Name="string3">/LM/W3SVC/560632691/ROOT-1-130519915587486075</Data>
    <Data Name="int4">2</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:51:04 PM
Event ID:      8313
Task Category: Topology
Level:         Error
Keywords:
User:          VANTAGE\sp_farm
Computer:      spapp1.vantage.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: OWSTIMER
Process ID: 8472
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:51:04.938901900Z" />
    <EventRecordID>14596</EventRecordID>
    <Correlation />
    <Execution ProcessID="8472" ThreadID="17360" />
    <Channel>Application</Channel>
    <Computer>spapp1.vantage.local</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">OWSTIMER</Data>
    <Data Name="int2">8472</Data>
    <Data Name="string3">DefaultDomain</Data>
    <Data Name="int4">1</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
20:22:31.94 SharePoint Portal Server User Profiles cm6y High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext)
20:22:38.16 SharePoint Portal Server User Profiles d22b High
Failure retrieving application ID for User Profile Application Proxy 'User Profile Service Application': Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_AppID()
20:22:44.25 SharePoint Foundation DistributedCache ah24v High
[Forced due to logging gap, cached @ 08/08/2014 20:22:38.16, Original Level: Verbose] DistributedCacheClient TransportProperties- ChannelInitializationTimeout '{0}', ConnectionBufferSize '{1}',
MaxBufferPoolSize '{2}', MaxBufferSize '{3}', MaxOutputDelay '{4}',ReceiveTimeout '{5}'.
20:22:55.26 SharePoint Foundation DistributedCache ah24w Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There
is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been
granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.). Additional
Information : The client was trying to com...

Thanks for the suggestion. I performed the service restarts, and then an iisreset an the two web servers, and the application server that does not run the services. Finally, I ran iisreset on the application server that does run the services.
After performing those steps, I still cannot manage the user profile service application.
ULS log at the time of the attempt contains User Profile Application Proxy errors (in my original post) and am also noticing the following error:
08:15:21.17 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException:
This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)     at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStag...

HP Connection manager service not installed. Application will exit

I'm actually having a number of problems with this laptop, but I figured I'd start with this one. I get the message "HP connection manager service not installed. Application will exit.
As strange as this may seem, when I get this message, I also cannot open any of the folders on my desktop. I don't know if the problems are related or not.
Any help is appreicated !
If this helps its model number is A5F92AV

Hi @krazykat_randi ,
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having multiple issues with your notebook, one of which is when you try to open the connection manager you get the message "HP connection manager service not installed. Application will exit.". You also can not open folders on your desktop.
Have you checked for viruses or malware? MS Malicious Software Removal Tool.
This is not a recommendation but many people have used Malwarebytes with success also.
Have you tried running MS Fix It to aid with overcoming issues?
Have you tried doing a restore back to when it was working properly?
If you still have issues I suggest you do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 7)
If you have not yet done a backup you will have an opportunity during the recovery to do one.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Management of global employee payroll configuration in sap hr

Dear Expert,
Kindly give me light on management of global employees payroll configuration.I have gone through different thread in sdn which are related to this but not able to find out accurate path to do this.
Regards,
Sankarsan

Thanks Wrens and Sreenu,
It works and changes the status of MGE to activate... but this still does not release the infotypes (700 series for GE ie 702, 703, 706, 715 etc with others). This is the situation after activating switches CCURE MAINS and CCURE GLEMP.
The message displayed is:
"You attempted to access infotype &1. According to the system settings, however, it is not permitted to use this infotype."
Any clues on this restriction.
Regards.

International Transfer scenarios to US ( Management of Global Employees)

What's the best way to handle Actions-MASSN for International transfers to US ? My client is a global company and every month there are 3-4 International transfers (not expatriates) to US from all over the world. Right now we terminate the employee in home country and we do a new action in US. We have two issues, though we have workaround, my guess is there will be better ways..
1 - We maintain the original emp id in IT185 (in a custom subtype) because our downstream systems only recognise the employee by the first PERNR the employee joined the company with.
I know this is not the best place to store.
2 secondly after we terminate the employee in the home country we do a prehire action in US meaning the employee is in Inactive status and we activate the employee when they receive their SSN in US. Which normally takes 2-3 weeks and till that time though the employee is working in US but not shown in headcount..which is another issue. HR says they cant activate an employee in system without SSN.
Is Management of Global employees module (IT710, IT715) the best solution for this ? What other options you suggest .?
I will really appreciate your help
Suman

Hi Suman,
Yes, Global Employment is the answer. The functionality must be activated in table T77S0 and there is a great deal of customization to do.
Basically, what will happen with this functionality is the employee will have two assignments and two sets of organizational data (IT0001), pay data (IT0008), two personnel numbers, etc. This is controlled by the Person ID which is maintained in IT0709. This links the two personnel numbers so the system knows that it is the same person. Again, T77S0 settings control the assignment of this Person ID.
The customizing will change the PA30 view to include an area where you can select for which assignment for the employee you want to view the infotypes. There is also a neat overview, again customized, that will allow you to compare the assignments.
There is a lot of work to do with this and in this short message I cannot cover it all, but the answer to your situation is to implement Global Employment.
PS: You must be at 4.7 or higher for this functionality.
Paul

Management of Global Employees (MGE) query

Hello all,
We are implementing MGE (Management of Global Employees) functionality for Personnel Administration for a global company. I have activated all Global Employment (GE) switches in table T77S0 after consultation with SAP. We don't plan to implement Global Payroll, but only the concept of Person ID which will be unique even the employee is transferred from one country to other. I have set up Generation and Selection Rule for Person ID. I would like to know if Person Id can be used for Master Data maintenance and can it be used in Reports as a primary query criteria (instead of PERNR). Also want to know how to set up Personnel Actions related to country transfer within MGE.
I would like to know experiences from the real-time implementations. Anyone worked on Global Employment and Person ID implementation?
Thanks.

Hi,
1. How to do use PNPCE logical database for Std and custom reports? Do we need to activate LDB PNPCE?
If you have activated MGE, PNPCE gets activated with it. For custom reports, the developers need to include the LDB in their code. But it should be available in all standard reports and queries. Although, you will have to be careful if you are converting any custom reports as the u201Cget pernr/perasu201D statements differ. Iu2019m not technical but I saw some interesting threads on that topic here. You might want to check those.
2. The use of Person Id for master data maintenance (instead of PERNR), would it be a problem for other HR modules implementation in future e.g. Benefits.
I think for other modules, you should stick to personnel number.
3. Instead of using std. SAP MGE actions- 81, 82, 83, can I create custom personnel actions and custom infogroups (with std HR infotypes). The std MGE actions look complicated for the business users.
Yes, this is possible. You need to modify feature ACTCE accordingly for the following logical keys:
EXPATPLANNING=81
EXPATACTHOST=82
EXPATACTHOME=83
EXPATCHANGE=84
The logical keys come predefined. Simply equate them to the custom action types. You can read the documentation for this feature for more information.
4. Is it ok if I don't use the Infotypes related to MGE e.g. IT 706, 707, 710, 715 (except IT709 which gets created by the system) since we want to use the basic level of MGE and not implementing global payroll.
I believe you need IT0710 and IT0715 to track assignment details and statuses if it is in line with the client business process. You can ignore IT0706 and IT0707 as you are not implementing the payroll piece of MGE.
Hope this helps.
Donnie

How does metadata get changed by both Lightroom and another application??

I am frequently getting the message "The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?" on images in my catalog. I use only Lightroom to organize, add keywords, do basic adjustments, etc. On the occasions I am taking an image into Photoshop to do further work, it's exported as a TIFF or PSD and the original stays in the LR catalog untouched by anything else I might do to the image.
I have two choices with this message: Use Lightroom's settings, OR overwrite them from disc. The first few times this scared me, as I had no idea where those changes were coming from and why the disc file had something different than the lightroom catalog. I have all my metadata saved in XMP files. But I took the chance and said overwrite LR settings, and saw nothing change on the sliders or image being displayed. I then tried a few saying 'keep LR settings', and again I saw no visible signs of changes. That leads me to believe that they are NOT changed but LR things they are somehow. But I don't like seeing it, I want it to go away unless there really are changes happening outside of LR (like if I went into Bridge or something...)
Any ideas why this message shows up? I just discovered about 100 images in a collection of images I sent to stock agency three years ago, and haven't done anything with them outside of LR since.
Thanks for any help you can give.

Users have complained for years about spurious metadata-has-changed notifications. If you're confident that you're not editing the file itself outside of LR, then choosing Overwrite Settings will rewrite the metadata in the file with the catalog metadata and (usually) make the spurious notification go away.
Unfortunately, LR doesn't tell you which metadata fields have changed, so users are left flying blind. I believe Rob Cole had a plugin that would tell you metadata differences between the catalog and the disk file, but his Web site has been down for a couple of weeks now.
ManiacJoe: My guess is that Photoshop is updating some EXIF data fields in the raw file, for example the "edited with software" field. Since Lightroom probably has already set that field, it gives you a warning that something changed.
Interesting hypothesis. I just tested that with LR 5.7.1, Photoshop CC 2014, OS X 10.10 and couldn't reproduce the problem. I exported a TIFF from a cataloged raw file into the same folder as the raw, edited the TIFF and changed some of its metadata in Photoshop, and saved it. LR didn't report a metadata-has-changed notification.
In general, I'd be (only moderately) surprised that if you edited x.tif in PS, it would change any metadata in x.cr2 or x.xmp.

App Management and Subscription Settings service applications

Hi,
I am upgradind SharePoint 2010 services to SharePoint 2013. I have updated UPS, Metadata, Search, Secure Store and now I want to configure App Management and Subscription Settings service applications.
For all upgraded services I used default IIS pool: 'SharePoint Web Services default'. But now I see that for App Management and Subscription Settings service Mifrosoft uses new iis pools in the configuration guide:
http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
Could you please advise if I can use defaulf pool 'SharePoint Web Services default' to configure App Management and Subscription Settings service applications?
If not can I use one pool for both services or should I use separate pool for each service?
Thanks

You cannot move the STS. Also, certain SAs right farm admin rights. If the farm will leverage those SAs, I'd encourage you to create a new App Pool for just those SAs, rather than re-use "SharePoint Web Services Default" (to prevent these SAs from
running under the Farm Admin).
http://technet.microsoft.com/en-us/library/cc263445(v=office.14).aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Starting the Oracle Identity Manager 9.1.0.2 Application Cluster (OWS)

Hello friends,
I have a question about how to start the Oracle Identity Manager 9.1.0.2 application that is deployed on Oracle WebLogic Server (OWS) 11g on 2 nodes (OIM_SERVER_01 and OIM_SERVER_02).
What is the procedure to start the Admin Server and then the nodes where the application is deployed Oracle Identity Manager 9.1.0.2
I left wondering the commands:
1. xlStartServer.sh
2. xlStartWLS.sh
3. xlStartManagedServer.sh
4. startNodeManager.sh
Thanks for the support...

First you need to start the AdminServer by the command xlStartWLS.sh then you can start the nodemanager on the hosts where your OIM server are located via the startNodeManager.sh command and then start the OIM Server via the xlStartManagerServer.sh command. Nodemanager is required to control the managed server if you plan to control them via the weblogic admin console. If you don't want to do that via console then xlStartManagerServer.sh and xlStopNManagedServer.sh would be able to control your oim servers. There is no specific order required for starting the oim servers, just that the admin server should be in running mode before you start the managed servers.
-Bikash

My computer is Win8.1 64bit. Where can i download Adobe acrobat DC 64 bit? The application manager always download 32 bits application for me.

My computer is Win8.1 64bit. Where can i download Adobe acrobat DC 64 bit? The application manager always download 32 bits application for me!
(I tryed PS and AI just now. the application manager installed 64bits PS and AI. Why it can't find a 64bit acrobat for me?!)

Acrobat runs as a 64-bit application on Mac. Acrobat on Windows is a 32-bit application that can run and has been tested on 64-bit versions of Microsoft Windows 7 and 8, and Windows Server 2008 and 2012.
FAQ | Adobe Acrobat DC

Access current user's manager name in the console application ( through Client object model)

Hi Guys,
Is there any way to retrieve current logged-in user's Manager name in the console application.
As I don't have access to the server where SharePoint 2010 is installed so I wanted to access through client object model.
arun singh

Unfortunately, you can't use CSOM to do this in SharePoint 2010 (you can in SharePoint 2013!), but you CAN use the User Profile Service .asmx web service to accomplish this. You need to call the
GetUserProfileByName method exposed
in the http://<yourServerName>/_vti_bin/UserProfileService.asmx web service. Pass in the user name for the current user and Manager will be one of the properties that is returned.
Here is a link to a blog post with example code.
Please mark my reply as helpful (the up arrow) if it was useful to you and please mark it an answer (the check box) if it answered your question! Thank you!
Danny Jessee | MCPD - SharePoint Developer 2010 | MCTS - SharePoint 2010, Configuring
Blog: http://dannyjessee.com/blog | Twitter: @dannyjessee

Work Manager both Global Work Managers & Application-scoped Work Managers

Similar Messages

Maybe you are looking for